PowerCLI script to display the number of vCPU by VMhost use

Similar Questions

• How to use the script to display the number of columns contain no data

  I have a requirement. There is a source that is the excel, the excel file file, we need to load data into the staging table. There are 5 columns mandatory ones must not be null. We used "No. Data Check" for this. The logic is so mentioned previously mentioned 5 columns don't contain any record that the record will be moved to without data. So far, it is fine. Now the requirement is to show what column or columns contain no data. We used a script to do this like:

  RES =' '

  RES = input1 [0] + ": failed because values null in required columns;"

  INPUT1 [1] = res;

  Output 1 = res;

  But it shows message "down because of nulls in the required columns", which is a generic message. We must show what column or columns does not contain the value "failed because of null values in a column required columnA, columnB or columnC. Can someone help me in this regard. Any kind of help is appreciated.

  You can use the variable inputname1, which keeps an array of names of the entry for the script processor attribute. For example:

  var result = "";

  var first = true;

  for (i = 1; i< input1.length;="" i++)="">

  If (input1 [i] == null | input1 [i] == ' ') {}

  If {(first)

  Firstly = false;

  } else {}

  result += "";

  }

  lead inputname1 += [i];

  }

  }

  If (result.length > 0) {}

  result = "failed due to null values in the following mandatory columns:"+ result; "

  }

  Output 1 = result;

  Kind regards

  Nick

• Need help to modify the Script to find the number of vCPU and reservation of memory in VC

  Hello

  Need help to modify the script so that his can person report to the vc all focus level instead of each level of the Cluster.

  Thank you

  KR

  Try this instead:

  $vmsInfo = Get-VM
  #Creating array to place new object
  
  $reportdata = @()
  
  Foreach ($vm in $vmsInfo)
  {
  #Creating new object
  $vmInfo = "" | Select Name, CPUReservationMHz, MemoryReservationGB
  $vmInfo.Name = $vm.Name
  $vmInfo.CPUReservationMHz = $vm.ExtensionData.ResourceConfig.CpuAllocation.Reservation
  $vmInfo.MemoryReservationGB = $vm.ExtensionData.ResourceConfig.MemoryAllocation.Reservation / 1024;
  #Inserting data into new object.
  $reportdata += $vminfo
  }
  $reportdata
  

• How do I dynamically change the the number of vCPU and amount of a virtual computer memory?

  Hi all

  My first question is how do I dynamically change the number of vCPU and amount of a computer virtual memory when the virtual machine is running? If so, this may be achieved by writing a few scrpits to inform the hypervisor?

  My second question is, I can start a virtual machine in KVM with the number of vCPUs and amount of memory configured in the startup script. I don't know if this is supported in vmware ESXi?

  I couldn't find the answer in the ESXi 5.0 user guide.

  Your suggestion will be highly appreciated.

  Cheng Wang

  http://sparrowangelstechnology.blogspot.com/2012/11/hot-add-of-CPU-and-memory-to-virtual.html

  You can change the ram and the CPU, but it must be enabled.

  by default, only it isn't.

  See this link to change the settings of vm via powercli

  http://ICT-freak.nl/2010/05/07/PowerCLI-script-to-schedule-memory-and-or-vCPU-updowngrade/

• How to display the number of socket in the ListBox UI control?

  I want to display the number of socket in the Listbox control on execution. I use DisplayExpression method, set the entry as '% TestSocketIndex', but it does not work. This methond works fine if I connect the Combobox of UI control to ExecutionViewMgr.ConnectExecutionList.

  Is there a solution

  

  

  Hey wellsc,

  I have looked at this issue and ran into the same issue you described. I dropped the CAR 482840 for a developer study the matter further. Unfortunately, workarounds only I can think immediately would be to use a ComboBox control or to implement the functionality desired by using a native LabVIEW ListBox.

  Let us know if there is something we can do to help, or if you have other questions about how to implement one of the workarounds. You can still use this CAR number to check the status of the issue, as well.

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,

• Z5 no longer displays the number of notifications that I have on each app

  Given that I've updated the marshmallow last night, my Z5 no longer displays the number of notifications that I have on each app :-( Does anyone else have this problem? Notifications will still appear in the notifications bar, but not on the applications themselves (the few).

  I just got some information about this. This is due to the fact that the snippet of code (API) which has been used by applications such as WhatsApp Messenger, to display unread messages, was not official, and is obsolete. The new API is shared among the partners and will require implementation on the side of the partner.

• Essbase calc script to determine the number of occurrence

  Hello

  is it possible within a calc script to determine the number of occurrence of a value in the account dimension?

  I have an account called ranks which can contain any value between 1 and 10.  I would like to know how many times each value is repeated for a specific cost center.  It's in a database of planning BSO.

  Thanks in advance for your contributions...

  CL

  This isn't the typical calculation you would do in an OLAP architecture, but yes it is certainly possible.

  you will need to create 10 accounts such as occurrence_of_1, occurrence_of_2 etc.

  Then you increment them according to the value of the 5th year.

  Don't forget to put in your calculation!

• Basic conditional script based on the number of lines in a text layer?

  Just received help here to write a conditional script by using the font size of a text layer. Thank you all for this.

  The next hurdle is a conditional script using the number of lines in a text layer in the differential. Far as I can tell it not the layer details which specify the number of lines. Just '\r' for a return in the idTxt descriptor. Nothing seems to stand for a soft return as far as I can tell. I'll probably have to be able to count the lines with soft and hard returns.

  Any thoughts?

  I was playing around with this a bit and here is a small script to determine the number of rows. This is based on the self in the head, that I calculated to environ.108 times the size of the font.

  #target photoshop
  app.preferences.rulerUnits = Units.POINTS;
  var doc = activeDocument
  var tL = doc.activeLayer
  var h = tL.bounds[3]-tL.bounds[1]
  var per = ((h/5)-(tL.textItem.size))/tL.textItem.size
  var num = h/(tL.textItem.size *1.108)
  
  alert(Math.round( num))
  

• Can write us "PowerCLI Script" to get the details of card RAID HP (Firmware &amp; Driver)?

  Can write us "PowerCLI Script" to get the details of card RAID HP (Firmware & Driver)

  For example: native ESX command below shows desired output for me.

  But we needed equality PowerCLI ESX command below script

  # cat/proc/driver/cciss/cciss0

  cciss0: HP Smart Array P400i controller

  Board ID: 0x3235103c

  Firmware version: 7.22# cat/proc/driver/hpsa/hpsa0

  hpsa0: HP Smart Array P410i controller

  Board ID: 0x3245103c

  Firmware version: 5,70

  Driver version: HP HPSA driver (v 5.0.0 - 17vmw)

  The extracted following PowerCLI you will get server and type of controller, firmware version and the hpsa/Smart Storage Array controllers driver version based of:

  Get-VMhost | Sort | Select Name, Model,@{N='Controller Type'; E={(Get-VMHostHba -VMHost $_ | ? {$_.Model -imatch '.*(hpsa|smart).*'}).Model}},@{N='Controller Firmware'; E={($_.ExtensionData.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | ? {$_.Name -like '*hpsa*firmware*'}).Name}},@{N='hpsa Driver Version'; E={($_.ExtensionData.Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | ? {$_.Name -like '*scsi-hpsa*'}).Name}} | Format-Table -Autosize
  

  The sample output:

  
  Name                     Model                Controller Type   Controller Firmware                           hpsa Driver Version----                     -----                ---------------   -------------------                           -------------------esxihost1022.local    ProLiant DL380 G6    Smart Array P410i    HP Smart Array Controller HPSA1 Firmware 6.40    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1023.local    ProLiant DL380 G6    Smart Array P410i    HP Smart Array Controller HPSA1 Firmware 6.40    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1024.local    ProLiant DL380 G6    Smart Array P410i    HP Smart Array Controller HPSA1 Firmware 6.40    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1033.local    ProLiant DL360p Gen8    Smart Array P420i    HP Smart Array Controller HPSA1 Firmware 5.42    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1034.local    ProLiant DL360p Gen8    Smart Array P420i    HP Smart Array Controller HPSA1 Firmware 5.42    Hewlett-Packard scsi-hpsa 5.0.0.60-1OEM.500.0.0.472560 2014-05-15 15:32:23.000esxihost1041.local    ProLiant DL380 G5    Smart Array P400    HP Smart Array Controller HPSA1 Firmware 7.24    VMware scsi-hpsa 5.0.0-17vmw.500.0.0.469512 2011-08-19 01:58:59.000esxihost1042.local    ProLiant DL380 G5    Smart Array P400    HP Smart Array Controller HPSA1 Firmware 7.24    VMware scsi-hpsa 5.0.0-17vmw.500.0.0.469512 2011-08-19 01:58:59.000esxihost1160.local    ProLiant BL460c Gen8    Smart Array P220i    HP Smart Array Controller HPSA1 Firmware 5.22    Hewlett-Packard scsi-hpsa 5.0.0-40OEM.500.0.0.472560 2012-08-24 21:04:51.000esxihost1161.local    ProLiant BL460c Gen8    Smart Array P220i    HP Smart Array Controller HPSA1 Firmware 5.22    Hewlett-Packard scsi-hpsa 5.0.0-40OEM.500.0.0.472560 2012-08-24 21:04:51.000
  

• PS the script to display the virtual machines that reside on a specified vSwitch

  In the process of migration of virtual machines to vSphere 5 Cisco Nexus 1000v running.  However, I need to generate a list of VMS still residing on the old vSwitch in a datacenter.

  I know the powerpack VMware display the VMCount, but it would be useful to be able to run the script every morning and send the list of virtual machines residing on the old vSwitch automatically.

  VCenter 5 running.

  You have probably more than 1 portgroup with this name

  Try it like this

  ## name of portgroup whose VMs to get info on $strPortgroupName = "MyPortgroupName"
  ## Get the View object of the Network of the given name, then get the View objects of the VMs on that network, and return the VMs' names Get-View -Id (Get-View -ViewType Network -Property Name,VM -Filter @{"Name" = $strPortgroupName} | %{$_.VM}) -Property Name | select Name
  

• How to display the number of lines of time giving the values of the columns?

  Hi all
  
  I want to display the number of rows times the value exists in the column num in the query below
  
  
  

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       SELECT 'krishna' NAME,     'hyd' LOC, 1 NUM FROM DUAL )
    SELECT T.* FROM T
    CONNECT BY ROWNUM <= NUM
  
  
  Expected output:
  
           venkatesh            hyd      2
           venkatesh            hyd        2
           prasad                 hyd        3
           prasad                   hyd      3
           prasad                   hyd      3
           krishna           hyd       1

  Published by: Nag Aswadhati on November 1, 2012 12:34

  Aswadhati NAG wrote:
  Hi all

  I want to display the number of rows times the value exists in the column num in the query below

  Expected output:
  
  venkatesh            hyd      2
  venkatesh            hyd        2
  prasad                 hyd        3
  prasad                   hyd      3
  prasad                   hyd      3
  krishna           hyd       1
  

  With the help of connection by: -.

  with t AS
     ( SELECT 'venkatesh' NAME, 'hyd' LOC, 2 NUM FROM DUAL
       UNION ALL
       SELECT 'prasad' NAME, 'hyd' LOC, 3 NUM FROM DUAL
       UNION ALL
       select 'krishna' name,     'hyd' loc, 1 num from dual )
    select t.name, t.loc
    from t
    connect by level <= num
           and name = prior name
           and (prior sys_guid() is not null);
  
  NAME      LOC
  --------- ---
  krishna   hyd
  prasad    hyd
  prasad    hyd
  prasad    hyd
  venkatesh hyd
  venkatesh hyd 
  
   6 rows selected
  

• Displays the number of rows in the table displaying a named criteria query data

  I created a test named for my View, called 'Criteria1' and Criteria1 to create a group of ADF with Table query. I want to display the number of rows in result when a search is performed. How can I do?
  
  Thanks in advance,
  Tom

  As mentioned, you can add outputText and you must give OutputText partialTriggers as query component your Id. Thus, when you give a search on the query component, it will refresh the outputText with the number of lines.

  
  ID = "ot1" partialTriggers = "id of the component of motion here" / > ""

• form table - displays the number of lines using LOV static

  Hello
  
  I have a report in table form, in that I want to display the number of lines.
  For this I created a static LOVfor no lines and transmitted a list of values say 10; 25.50; 10,25 and 50... 1000; 1000
  but my question is that how can I display all the lines in the tabular presentation using the static lov (as having one of the values in LOV like ALL for the number of lines to display).
  
  can someone help me with this.

  1000; 1000... ALL; 9999999999

• Is there a limit on the number of times you can use the recovery CD

  I have a desktop a6242n and the failed hard drive, I installed a new and inserted the recovery CD and it comes up with the message that this is not the correct CD for this computer. I made them when I first got the computer and used without problem. Is there a limit on the number of times I can use the recovery CD? If I buy a new game that will work?

  Hello

  There is no limit to how many times you can perform a recovery from the discs. The issue is likely because the hard drive does not have DMI information loaded on it. You will perhaps call HP and order a set of recovery disks and ask them to guide you through access to tools on the recovery disk to reload this information on the disc, assuming they are available.

  Good luck!