Display the widget of the matter in front of other objects on the slide

Similar Questions

• Display the slider volume not showing on dv6-1355dx

  Slider volume control adjust the volume, but does not appear on the display. Did a hard reset but does ' t solve the problem.

  Any suggestions will be appreciated.

  Using a HP dv6-1355dx MediaSmart with Windows 7 SO.

  Thank you

  MELC

  Thank you Paul,.

  The software you suggested did the trick.

  Thank you very much.

• Slideshow behind the image that vanishes when the mouse to display the slide show and fades in when mouseout/mouseouthandler() to hide the slideshow.

  Hello.

  I tried and tried all day.

  I even started to check the adobe edge animate to help you.

  but so far I couldn t find a solution.

  Hopfully somebody can help me.

  Here´s idea:

  I want to create a clean and simple website.

  There should be pictures, one under the other.

  When the visitor hovers over one of the images, it should disappear (fade out).

  Behind this image is a slideshow in the same format.

  When the cursor changes from space, the image is displayed again (fade in).

  Another idea is, it's a slide show, which begins when you mouseover

  and stops and shows the first picture when you mouesout the area.

  There should be no button or anything.

  Sounds easy, but I found no solution.

  Is there a possibility?

  Kind regards

  Jan

  You can try using compositions, the active State for the triggers of otherwise fair and transparent setting for the target containers. Same thing for all.

  Thank you

  Sanjit

• Disable auto playback but do not display the big Play button in the Middle

  I have autoplay disabled in Edit-> Preferences-> project-> Start and End (unchecked all keys here). But I don't know how to get rid of the big button with the Play arrow, which is now displayed on the top of the blade up to that someone clicks on it. In addition, the slide is dimmed, although I unchecked fade in and out. It is probably dimmed to indicate that it stops.

  Maybe there is a way to change this behavior? I would like to display the slide as if it were a picture, and if someone wants to hear the narration, he must click the small play button in the toolbar. If this isn't the case, then it can just look at the photo.

  I think this should do it: the slide must be autoplayed, but then stopped after 1 millisecond, so nobody notices who played. But how? Or maybe it is possible, to somehow get rid of the Play button in the Middle, and prevent the image being mitigated, then the presentation isn't autoplayed.

  Hello

  What you need to do is turn ON autoplay. Then insert a box click on your first slide object to keep it paused until your user clicks.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• the iOS 10 not displaying calendar widget is not the events

  After the update to iOS 10.0.2, the calendar available on the lock screen widget does not always display the events. Nor the duration of the event or the event name appears, but a white widget with calendar color bar can be seen.

  This is not always the case, but very often. For ex, if you open the calendar application, then check this widget, event, but after that you lock the screen and check again, it would disappear.

  Hello jyothishureth,

  Thank you for using communities of Apple Support. It is my understanding from your iPhone Calendar widget still shows no events. I use my daily calendar to keep me organized. I can understand your concern. I'm happy to help you.

  If you haven't done so already, I recommend that you restart the phone. This can solve many unexpected behaviours. Follow the steps below:
  

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo

  Restart your iPhone, iPad or iPod touch

  If the problem persists, try to remove the widget and adding it back on. Use the following steps:
  

  1. Right above the home, lock screen or Notification Centerscreen.
  2. Scroll down and tap on change.
  3. To add a Widget, press on . To remove a Widget, press on . To reorder your Widgets, touch and hold next to the apps and drag the in the desired order.
  4. Finally, tap done.

  Use Widgets on your iPhone, iPad and iPod touch

  Have a great day!

• How to display the name of my refnum on the front?

  I write data to a file. To do this, I use ' Open/create/replace the file' to prompt the user for a file name, which is then out of my VI as a refnum. I then write strings in this file with "write to a text file.

  How to display the name of the file (including the path) on the front panel once the user has entered it?

  Michael

  Use the Refnum at the path of e/s from file-> advanced file palette. You can wire it to a path indicator.

• Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel?

  Is it possible to connect a simple 1 d array to a digital indicator or what would be the best way to display the numeric values of the array on the front panel? Examples or suggestions would be greatly appreciated.

  Thank you

  Tunis

  Thank you Adam, it's originally in a while loop, I placed it in a loop for example, wired County in the for loop and presto, this son of a digital indicator. It works very well. Thanks for the help folks.

• Help with a 3rd party on my Web site widget (does not display the dates of concerts)

  Hello world!

  I use a Bandsintown widget to display the dates of the show on my site, but lately it does not show the text, the widget shows but no text, you can click which means that the widget works but it does not show the text. I contacted Bandsintown support and they told me to change the CSS, but honestly I don't know what they are talking about.

  Here's a link to my site, if someone wants to help

  http://www.xolazulband.com

  Hey Urbano... I finally got the Bandsintown html code to work properly in Adobe Muse. I created a new white master with no background, images, etc. and applied to a new, blank page. Then I pasted the original HTML... with no changes and no additional graphics on the page. It worked... I could see all the information of the tour. Then, one by one, I added additional elements to the master page... as image background, menu, logo, etc. I kept it check each time I added an item until my page has been done. It worked. You can see it here: shellyphelps.com/tour. Why does it work? I have no idea, but I'm guessing it has something to do with the fact that "by default, the widget uses the styles of the page, in that it is included". I'm not a coder either... just determined to understand! LOL I hope it works for you.

  Thank you

  Shelly

• Can the ToolTip + display Lightbox widgets be together?

  Hi, I am trying to insert a ToolTip widget in the action of the Lightbox display widget button, is it possible?

  I know that you can insert the balloon inside the Lightbox display widget, but what I need is something like a hyperlink, the ScreenTip for the Lightbox display widget.  The final effect I want to achieve is that the effect of the ToolTip widget overview shows one image and if the ToolTip is click it, and then display the Lightbox widget.

  No idea or help will appreciate.

  -Javier

  Hi Kandorean,

  You can achieve this effect by changing just the thumbnail jQuery rollover State.

  Please try this and if you are looking for a different output and this doesnot serves then please provide us with an example or the screenshot of what you want to achieve and we would try to find out if that can be achieved in MUSE.

  Kind regards

  Fox

• How to display the first page first and two pages (back and front) then?

  Hello

  I use acrobat 9 (Beginner).

  I have a document that should be displayed as"a book", IE two pages on the screen at the same time, the back of the first sheet and the front of the second.

  The problem I have is to display the cover on a single page (only) and then to have the layout of double page as described above.

  How I do that?

  Thanks for your help

  Concerning

  Fanch

  Entry of the menu View > Page Display > Show covers...

• Can I display the battery level of the mouse on my desk at all times?

  I have an apple mouse and I want to check the battery level of mouse frequently without open the system preferences application. Can I permanently display the level on my desk somewhere?

  You may be able to view the status of the battery of a keyboard and a wireless Bluetooth mouse

  from the inside (or bound by) Bluetooth icon that can be made to appear in the Finder

  top right of the main window. The two items should be a little quicker to consult, through this path,

  that to go into System Preferences > keyboard, mouse, etc.

  Didn't see a third party application or widget that might show the remaining battery life

  in the computer or external BT wireless an iDevice. There may be a.

  A widget by name iStat Pro used to offer a way to see these items, but not in the last

  version and the company that makes the excellent original, no longer exists as such.

  Good luck & happy computing!

• How to display the number of socket in the ListBox UI control?

  I want to display the number of socket in the Listbox control on execution. I use DisplayExpression method, set the entry as '% TestSocketIndex', but it does not work. This methond works fine if I connect the Combobox of UI control to ExecutionViewMgr.ConnectExecutionList.

  Is there a solution

  

  

  Hey wellsc,

  I have looked at this issue and ran into the same issue you described. I dropped the CAR 482840 for a developer study the matter further. Unfortunately, workarounds only I can think immediately would be to use a ComboBox control or to implement the functionality desired by using a native LabVIEW ListBox.

  Let us know if there is something we can do to help, or if you have other questions about how to implement one of the workarounds. You can still use this CAR number to check the status of the issue, as well.

• How can I display the size of the façade?

  Hello

  I use the vi Analyzer do ensure that all front panels are the right size. Is there a way to display the size of the cover without having to run the VI Analyzer?

  You can open the VI, go to file > VI properties > Window Size > set to the size of the current screen, reading of the height and width, and then click Cancel.

  Or you could do something like the following if you want to programmatically and simply provide a path to the VI you want to check:

  

• With the help of pre-build action to display the svn version number

  Hi people.

  I was thinking about using a pre build action to display the current number of svn on the front panel. I have a vi that can get the current number of svn. However, the problem is how to establish links with the application. Is there a way that before the generation can provide the data to the executable file, or what I have to write to a file and then the executable read each time it starts.

  Thank you

  Select this option.

  
  

• is it possible to display the number of elements in the array before you run?

  Hello

  At runtime, I can use the size of array function to check the number of items in a table. But it is possible to display the size of the array in edit mode (i.e. before turn the vi)? Thank you.

  dragondriver wrote:

  The table contains for some culster complicated. Yes, you are right, to help to see the last item will give an idea. But what I want is that anyway to show an indicator on the Panel before showing the dimension when the user changes the size on the fly.

  You can implement the whole thing (indicator of control and the size of array) as a X-control. They are fully operational in edit mode.

  I still don't quite see what you're trying to do? Why would it matter what happens in edit mode? A finalized VI must always be runnning during use. Use a state machine architecture.