Dissimilar network segments

Similar Questions

• Share printer on 2 network segments

  I use HP8600 with Motorola 6580.  There are two network segments:

  Network of comments begins 192.168.1.x

  Primary network is 192.168.0.x

  HP printer is 192.168.1.x, but cannot be used by the primary network.

  Is - it possible to share the printer on the two segments?

  Not going not to happen.  You need to connect the printer to your network, not the comments.  Get the network of 192.168.0.x.

  Some routers allow you to connect the network invited to your primary network, so you can plug these devices... except Linksys.

• CC Desktop App for the Government concerning: the end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:

  1. They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
  2. The deployment of renewal process will work the same as above?

  Government accounts https://forums.adobe.com/thread/1483694 can help

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  or

  http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent

  Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions

• isolation of network segment

  Hi guys,.

  I need your help and your ideas. I'm planning a network infrastructure of our network. We currently have 3 network segments, and each segment has 2 servers (cluster: active/passive). My plan is to consolidate all the servers in a single tank of the virtual machine. Now is my question possible to isolate the server by segments? What safe?

  

  If you haven't read Ken networking articles, its best to boot from by http://kensvirtualreality.wordpress.com/2009/03/29/the-great-vswitch-debate-part-1/ and design the way you want, but for logistics with segmentation, it would be better to create circuits with VLAN and its great you have multiple switches for layoffs.  I would spend time to understand this guide, and you're being a rockstar on the design of networks here.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• RAC nodes on two different network segments, what can go wrong?

  Two-node RAC, what are the disadvantage if both nodes are on different network segments?
  So the two node will be have a public interface on different segment, but interconnection will be on the same segment.
  The two nodes have the same gateway and two network segments goes to the same switch.
  
  It's Solaris, Oracle 10 g (10.2.0.4)

  Hello

  Public IP addresses and virtual IP addresses must be in the same subnet.

  This is necessary because the VIP - IP (two nodes) should work on two public networks.

  Recently I've set up RAC extended with diferent networks (subnet). When all nodes is all that is very well. But when a node down, clusterware node gel survive because he trying vip - ip (different subnet) node configuration on the node down to survive.

  Kind regards
  Levi Pereira

• Internal network segmentation using firewalls

  Recently, an auditor suggested we should segment the internal network, including all professional applications, population office, internal messaging, remote access and the wan by using firewalls. Anyone done this? If yes why?

  The concept of the demilitarized zone (DMZ) provides protection for senior level servers and applications etc. while allowing web servers and mail in general, access and the Internet. If the host is compromised, they do not provide an immediate springboard to important internal servers.

  Of the resources of the company risk assessment will determine the level of required access control. Higher instances of compromise are always determined from internal sources and may justify measures of access control applied to the population of office according to the circumstances of the company and the security posture adopted.

  See you soon,.

  Paul.

• Network segmentation

  I need help matching the vSwitches (to ensure failover) on our 3 hosts who live in a cluster of vSphere 4.1, and each host has 8 cards of network physical. Each host has 5 vSwitches configured with 4 of them being identical configuration, see below.

  vSwitch0

  Port VM group

  Port of VMkernal

  vmnic 0 & 6

  vSwitch1

  Port VM group

  VM iSCSI network

  VMkernel for iSCSI

  vmnic 1 & 4

  vSwitch2

  For vMotion VMkernel

  vmnic 2 & 5

  vSwitch4

  Port VM group

  vmnic 7

  But here's where I hope to get assistance, hosts A and B have an additional vSwitch3 that are configured in the same way in vSphere, both at the level of the physical switch. However, host C has vSwitch3 that is not configured as the others. Currently, traffic is minimal on vSwitch3 on all hosts. Should I add a physical NIC extra in order to continue to use the two VLAN 999 and 300 below and ensure that all virtual machines can failover? Or y at - it another way around this problem?

  vSwitch3 (the hosts A and B)

  Port VM group

  vmnic3

  VLAN ID 999 (physical switch)

  vSwitch3 (host-C)

  Port VM group

  vmnic3

  VLAN ID 300 (physical switch)

  First of all, are you using what NIC teaming policy on the vSwitch?

  So, have you created the trunks on the physical switch now? A very confusing fact is "trunk" is the name of Cisco for tagging VLANS, but on your switches HP a "trunk" is the aggregation of links, similar to Cisco Etherchannel.

  If you want to use a trunk of HP you also need the IP hash NIC teaming policy on the vSwitches, but you must also change your switch configuration physical trunk of Dynamics (LACP) static ("HP trunk mode"). However, it is in my opinion often preferable to not use this link aggregation modes at all.

• We made an update on all the pc company and going from XP to 7. Easy transfer does not seem to see computers that aren't on the same network segment.

  Try using the simple transfer of transfer from old pc (XP) user profiles to their new pc (7). Easy transfer does not seem to see through switches. If I have 2 machines in different parts of the plant the application will not be the handshake. What I am doing wrong?

  Nothing.  The 'old' and 'new' computers must be on the same subnet.  You can use the intermediate storage.

• "LAN Segment" option missing in the virtual network Editor

  I regularly use isolated networks to test things. With the help of my own DHCP / DNS /... Server for 'infrastructure'

  In 9.0.2 workstation there is an option "local network Segments. Miss me this option in 2013 of the workstation.

  Why this option has been removed? Or was it an oversight? Or should I add something to my configuration?

  Never mind.

  'LAN Segments' option is not displayed in the network Editor, but it IS displayed on the virtual network adapter settings page.

  I'm sorry.

• How to connect a LAN Segment to the network host Workstation 7

  Hi all.

  This can be a really newbie question, but I'm quite a novice on vmware

  I have set up a team in VMWare Workstation 7 with a few machines virtual all assigned to a single LAN Segment. Everything works fine, but now I need to have internet access in my virtual machines. How to configure the local network segment to see my host network, so I can internet ping?

  Thank you very much!

  OK - see here - I have matched to your vmx file so that all the entries of ethernet0 appear in a row.

  That's what you have now:

  ethernet0. AddressType = 'generated '.

  ethernet0. ConnectionType = "Charlotte".

  ethernet0.generatedAddress = "00: 0C: 29:c3:36:10.

  ethernet0.generatedAddressOffset = '0 '.

  ethernet0.pciSlotNumber = "33".

  ethernet0. Present = 'TRUE '.

  ethernet0.pvnID = ' 52 4 c 5th 98 70 6 82 a-1 b - 0f 97 5 m 76 2 8 a 85 eb ".

  ethernet0.virtualDev = "e1000".

  ethernet0.wakeOnPcktRcv = "FALSE".

  Then, I list all the settings that you should NOT touch:

  ethernet0. AddressType

  ethernet0.generatedAddress

  ethernet0.generatedAddressOffset

  ethernet0.pciSlotNumber

  ethernet0. Now

  ethernet0.startConnected

  ethernet0.virtualDev

  ethernet0.wakeOnPcktRcv

  Regardless of the settings of they - leave it alone - don't change to it for this task. After that only these two lines are left:

  ethernet0. ConnectionType = "Charlotte".

  ethernet0.pvnID = ' 52 4 c 5th 98 70 6 82 a-1 b - 0f 97 5 m 76 2 8 a 85 eb ".

  These two are those who configure the local network segment.

  Remove them and replace them with this single line

  ethernet0. ConnectionType = "nat".

  In case you want to break up the team to remove this line

  inVMTeam = 'TRUE '.

  and delete the *.vmxf file in the same directory.

  For more information on configuring network in the vmx file read my site

  http://sanbarrow.com/VMX/VMX-network.html

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Segments of network &amp; virtual switches

  Hello. I have a question on the Association of the physical NIC ports to a virtual switch.                                                                                I have two network segments. The first has a group of VLAN ID. The second has a network isolated from the VLAN ID to evoke. Can I combine the physical NETWORK adapter ports that are connected by physical switches on the two network segments, on the same virtual switch defined in VMware ESX 3.5 / vSphere? I guess I'd better associate the two network segments with two virtual switches, but I'd like to hear from you.

  Thanks in advance for your help

  If you cannot physically route between the two segments then you can create exchanges on a vswitch and have dedicated NICs for each group of ports and plug the network adapters in the relevant physical switches that connect to network segments or if total isolation is necessary, then create a separate vswitch and do the same thing...

• Tips to add a VPN router to my current network configuration

  Dear all

  My apologies if the answer to this question already exists, however, I searched in many situations and none seem to match what I'm after.

  I currently have an ISP modem/router in Bridge mode connected to a TC of Apple which is my wireless router, I have 2 Express airport connected to this acting as the extensors of the range.  I have a VPN service through the MyPrivate network I activate on the desired device when required and everything works fine.

  What I want to do now is to be able to use my AppleTV and burning Amazon via the VPN as well so you need to add a VPN router in the configuration.  I want to finish with 2 wireless networks running together for these devices who need VPN and those who are not.  I don't want to lose the opportunity to extend the network to express it however airport.

  If someone could explain to me if this is possible and if so how do I set up the network.

  Thanks in advance

  Mark

  Basically you would need a device that supports VPN-passthrough and VLANS for your goals of networking. MyPrivate network, seems to be a VPN SSL, which is a user-server configuration. In other words, you install a client VPN on your Mac and you connect to the VPN network MyPrivate server to establish a VPN tunnel.

  Networking two or more "separated", should be using a router that supports VLAN services. Each segment of VIRTUAL local area network, in essence, would be a separate, she either wired or wireless network or a combination of both. This would probably be the 'easiest' part for the installation program.

  Now how combining the two would be the question, and I don't know what would be the best way, or even if it is possible.

  A few thoughts:

  • Use a router that supports VLANS. Create at least two VIRTUAL LAN segments. One for Apple TV & Burns, one for Internet access in general. Connect the device to VPN client host on the first segment, and configure for Internet sharing.
  • Download a dedicated VPN network application that supports hosting of third-party VPN clients, like yours. You would still need a router that supports VLAN to provided separate network segments.
  • Hire a consultant network. Let them know what you the goals of networking and ask them to offer potential solutions.

• Static route / network Configuration?

  I have a cable modem that connects via Ethernet (eth0) of a configuration for NAT and Firewall Linux box.  Another card (eth1) connects to a switch for my cable network (192.168.1.1/24).  I added a third adapter (eth2 - 192.168.2.1/24) which is connected to a M20 (192.168.2.2).  The server DHCP M20 has been implemented to serve the 192.168.3.1/24 network.

  Is there a configuration more simple than that?

  Problems reported with the current configuration:

  (1) I think the M20 NAT function must be disabled because the Linux machine is.  However, disable NAT causes machines on 192.168.3 bad connection to the internet.

  (2) I want the machines wirelessly on 192.168.3 to see shared windows on 192.168.1 and vice versa.  Currently they do not see each other.  If I remove M20 and plug a PC eth2 and set as 192.168.2.2, this machine can see actions on 192.168.1 and vice versa.  I think a static route must be set on the M20 so that he knows what to do with traffic to 192.168.1.  However, I don't properly because he always tells me I have an invalid route when I try to enter.

  (3) is there one another device other than on the M20 motorway which would better suit my needs (adding a wireless to my private/internal network segment)?

  Kind regards

  Case No.

  OK, I just saw the previous thread on this question pop up on the first page,

  Valet parking can be defined as an access point only?

  I'll try the posted instructions here.

• LaserJet professional M1217 nf: cannot scan over network with a printer laserjet 1217 on a Mac

  Hello

  My set up:

  Mac with Yosemite

  LaserJet M1217 more wireless

  Description of the problem:

  I can't scan. Preview, the control panel or image capture, I get the same error saying "cannot open a session.

  I have installed and reinstalled the drivers/printer about 100 times.

  I tried to add the printer/scanner like airprint, or with the name of the printer as a proposed post.

  Just what causes the same error.

  I have the 2.0 version of the driver installed right now. Tried with 1.7, same result.

  I can print without problem since my Mac and my iPad.

  Tried it with an ethernet cable and have the same problem in case someone ask.

  I looked all over google and doesn't seem like someone else has the same problem? Many people have problems printing over wireless, but it's ok for me. Is the scan, I can't go to work.

  Pages of HP does not offer any other driver which has of the Yosemite. HP offers no additional program for Mac and scan.

  Don't know what else to try.

  Little help? Anyone?

  Thanks Geminy02,

  Unfortunately, your suggestions did not help, and I have a few comments about them.
  First of all, your suggestion about the router was the problem is quite impossible, as you will need to check if the ports are open only in the case we're talking about two different network segments. If you have your printer and your computer in the same segment you will have problems of ports.
  Second: if I would have chosen IP protocol to add my printer, I wouldn't take the option scan, as you said, which means I could not done any tests that I mentioned in my original post, and I would never have had to the point of getting the error message.
  Thirdly: the drivers that you MENTION for download are exactly the same as you get with yosemite, so, this could help to reinstall the driver, it's kind of a long shot (and yes I tried).

  In fact, I managed to solve my problem by doing a factory reset of the printer, any sign of a printer in my computer, cleaning and reinstall the printer using the airprint driver suggested by yosemite where to find my bounjur printer.

  I tried ro think what could be the reason, or to see all what I had changed, and the only thing I've seen different in the configuration before and after he started to work was the name of the printer. When it did not work my printer was called simply "printer", when he was working he was the full name that comes by default. It would be very strange, that this is the reason, but I just mention it here just in case someone read. I believe that the factory reset was the difficulty, not the configuration itself.

  Just for the other readers, I can confirm that this unit can print and scan over my wiresless and cable network on yosemite, with the help of preview, capture image or scan property in the control panel. It took me several hours to make it work, but it does, and my best friend was all the time the printers web page, where you can change the configuration of the printer.

• suddenly more elements network named WCIVANT04 now gone

  Never had this in the column before network.  Clicking on it opens a box that included "scan with Norton" (Norton failed to find all the files inside) and "connect to remote computer."  Anyway another box opens with a subject top left appearing as "Windows security" and required my user name and password to open the WCIVANT04 folder.  I did not either.  What is c?

  I keep the libraries where the unusual item was featured in the network segment and reopened and the unusual element, to which I refer was gone.  He has since reappeared then disappeared once more

  I answered my own question below... except that I have not added a file and print sharing resources... at least not that I know well, except if performed by mistake.