Distance fail RV082 after generation VPN certificate.

Similar Questions

• Secure connection failed Firefox 33.0.2 (certificate Secure Connection failed sender is invalid.) (Code d'erreur: sec_error_ca_cert_invalid))

  Updated to 33.0.2 and now on some self-signed sites that use my internal network servers, I get the Secure Connection failed Firefox 33.0.2 (certificate Secure Connection failed sender is invalid.) Error code: sec_error_ca_cert_invalid). Sites are used to administer my internal servers and have current certificates. Is there a work around or fix for this problem? I should stay on older versions of FF.

  Thank you.

  Hello bpainter77, I think that this issue will be addressed in a next update - set an exception for pages with a sec_error_ca_cert_invalid error can work with the beta version of firefox 34 already: http://www.mozilla.org/firefox/beta/

• I installed the Socks5 & IPIG connections & after my vpn connection simply stopped working.

  stopped my VPN connetion working.what I do?

  last night, I installed the Socks5 & IPIG connections & after my vpn connection simply stopped working. I don't know if it's because of Socks5 or IPIG connections but I tried everything, including the restoration of my windows & uninstallimg 2 connections, I even deleted all my internet connections, including vpn & them reinstalled but nothing worked.when I click the vpn connection, it just shows that this message saying could not be contacted.

  is my windows homebasic .plz help of vista...

  Hi Melanie,

  You can consult the following articles and check.

  You receive the error code 741 when you try to establish a VPN connection type PPTP on a computer running Windows Vista

  Troubleshooting remote access VPN

  If you are working on a domain environment, then you will need to contact the system administrator for assistance.

• How do I create the file zxp of the aip, generation after generation of the solution file.

  How do I create the file zxp file aip, generation after generation of the solution (program code)

  I build example file from CC (given with the sdk) 2015 Sdk for the creation of the aip file, so I want to create file zxp that generate PID file

  How do I do that please help me

  Thanks and greetings

  Kundan

  Yes, you must rebuild your plugin using the SDK CC headers. I thought that you had already done, but looking back through the thread you started saying the problem was with the DrawArt sample in the SDK of CC and then move to your plugin.

• Download ASDM does not not after installing the VPN certificate

  Hi guys,.

  I just installed a public certificate signed by GlobalSign to avoid that the certificate warning whenever I used Anyconnect SSL. Certificate has been added in the identity certificate and then on Settings SSL I chose it as TrustPoint.

  I am running:

  See the boot

  Variable BOOT = disk0: / asa916-8-smp - k8.bin
  Current BOOT variable = disk0: / asa916-8-smp - k8.bin

  VPN now works as expected, but when accessed from outside https://domain.com/admin I get no data received the Chrome.

  As a retail, Chrome says: unable to load the Web page because the server sent no data.

  Can share you some thoughts of how can I solve this?

  access http enabled on your interface outside the subnet pool?

• vRealize 7 - NSX Automation deployments fail due to problems of certificate with vRealize Orchestrator

  Hello community,

  After you have installed the latest version of vRA, vRO, and NSX I run questions when you apply components that use components of the NSX. First of all: details of the version:

  -vRA: 7.0.0 (build 3292778)

  -vRO: 7.0.0.16989 (build 331003)

  -NSX: 6.2.1 (build 3300239)

  vRO plugin versions are delivered with the vRO version listed above with the exception of the plugin NSX, which has been updated to the latest version (1.0.3 published on 17.12.15).

  In the configured tenant vRO is configured as endpoint. I can check the data collection is running and working. I can see the plugin NSX for vRO runs the workflow 'create endpoint NSX' from time to time using the configured user of vRA VRO.

  In the configured tenant vRO is thus configured as server default for ASD vRO. Connection test is successful. When you save the config I'm prompted to approve the vRO certificate, which I confirm. Note that the thumbprint specified matches the footprint of the vRO certificate that I get during the visit of the vRO system on https://vro:8281. I am able to navigate the vRO vRA designer workflows, therefore: connection seems established.

  Within vRO the vRA COFFEE and plug-ins IAAS have been saved successfully. I am able to browse the inventory of plugin for both plugins.

  To solve the problem, I created a new unified plan within the design section of vRA with the following configuration:

  -Transport box: my area of transport configured NSX (checked: manual creation on this area using NSX works very well)

  -Routed res pol. Bridge: my reference for the dash cluster to use Pol

  -The only component dragged to canvas is a 'network and safety'-> 'On-Demand NAT Network' that uses a profile preset 1-to-many network as is "Parent network profile" without manual modification.

  -Note that, although there is a plan very simple example to illustrate the problem, it happens with any model that I have set up if any component is confgured requiring the NSX plugin for vRO.

  "Whenever I ask this plan, the request fails with the error message:" ","application [fa1e0689-0d06-4308-a914-e498c0d1fd99]: 404 not found "

  Looking in vCenter, NSX and vRO I can check that nothing is really trigged when you ask for the action plan.

  Consider the vRA /storage/log/vmware/vcac/catalina.log becomes very visible:

  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.isEndpointAlive:88 -
  vRealize Orchestrator endpoint with url [https://s00-vro.my.domain:8281/vco] is not alive. 
  Exception message:> [Host name 's00-vro.my.domain' does not match the certificate subject provided by the peer (CN=s00-vro.my.domain, OU=VMware, O=My Company, C=DE)]
  
  com.vmware.vcac.iaas.vco.network.helper.VcoEndpointSelector.getFirstAliveEndpointByPriority:200
  - vRealize Orchestrator endpoint [https://s00-vro.my.domain:8281/vco] with priority 1 is not alive. Skipping.
  
  org.springframework.web.servlet.mvc.method.annotation.ExceptionHandlerExceptionResolv
  er.logException:189 - Handler execution resulted in exception: Endpoint not found. There are no vRealize Orchestrator endpoints that are alive.
  
  com.vmware.vcac.platform.service.rest.resolver.ApplicationExceptionHandler.handleHttpStatusCodeException:673 - 404 Not Found
  org.springframework.web.client.HttpClientErrorException: 404 Not Found
  ...
  ...
  ...
  
  

  Please note that I double checked the certificate. This is a self-signed certificate created using the 7.0 vRO new control panel, the one I get when you go to https://vro:8281. It is valid and the object (issed to CN) matches perfectly the hostname entered the ASD and endpoint configuration in the vRA. It is separable and time on all components of the server is in sync with the use NTP.

  Now, I even re-generated certificate and re-registered and rebooted all the components, but while I can see that the certificate has been updated all components I always get the same question.

  Never had this problem with the previous version of the NSX / vRA / vRO. I checked the documentation if nothing has changed here, but did not find what I'm doing wrong. Anythimg I'm missing here? Any bug?

  OK, this seems to be the issue. So put atleast to previous day since version ofvRO (cannot check if it's true for charges vRO 7 installs as well but it is probably) vRO 'control center' will generate certificates based SHA1 vRA love not for actions that use the endpoint in the vRA vRO. ASD seems to work without these problems.

  Sidenote: VRO upgraded installs will also come with SHA1 based CERT if they use a self-signed cert created by vRO. However: you would think that it is sufficient to recreate the cert using the control center. But it turns out it isn't, because it will generate a (new) based SHA1 cert.

  What I did to solve the problem:

  1. create a vRO SSH2 based certificate without the cert extensions, similar to the one that ships with built-in vRA vRO. I tend to use xCA for these jobs, but openSSL will do as well. The exact format required for the certificate of vRO is not documented, but I can make sure you need it like this: PEM certificate in key private and public including format PKCS #1, formatted as follows:

  -----BEGIN RSA PRIVATE KEY-----
  (Your private Key: your_vro_server.key)
  -----END RSA PRIVATE KEY-----
  -----BEGIN CERTIFICATE-----
  (Your primary certificate: your_vro_server.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your intermediate certificate: intermed.crt)
  -----END CERTIFICATE-----
  -----BEGIN CERTIFICATE-----
  (Your root certificate: root.crt)
  -----END CERTIFICATE-----
  

  I had problems when I used the key extensions so I would say you don't use and don't create a very basic cert without extensions V3, as indicated on the right of the image to my last post (ideally, you want to have a cert with the same properties as the cert is used by the device of integrated vRO vRA unless of course different CN) etc.).

  2. use the vRO control center located at https://your-externa-vro:8283 / vco-controlcenter / #/ and move to--> Orchestrator Server SSL certificate certificates. Use the action to import to import your PEM cert. It should tell you that you need to restart your device vRO. Then RESTART the device (for not just restart the service, this seems not be sufficient).

  3 al ' vRA remove the Endpoint vRO everywhere wherever it has been configured. Also, I removed the vRO to the ASD config just to make sure that nothings left.

  4 reboot the vRA power (IAAS can be left as what). I needed to do this because I have seen that the keystore at some point would keep beeing crushed by CERT vRA (?), I deleted it (AND I checked that they are deleted) reappears in the keystore after a while. After a reboot, the problem was gone, the keystore was clean.

  5. Add the configuration of endpoint and ASD vRO. Accept the certificate.

  6. the works.

  Therefore, while I have no more time to solve the problems more than I guess the problem is the SHA1 function certificate generated by the device of vRO. The internal unit is equipped with a SHA2 based cert that works and after that change the external device SHA1 cert in a basic cert SHA2 all works.

• Failure of the generation of certificate when installing RS

  I install the SRM 1 update on the server with Virtual Center 2.5 update 3.   I get following error (or see attached screenshot):

  Failed to generate the certificate.

  Details:

  Error: Invalid Argument: DR_CERT_SERVER certificate filed is too long (> 32)

  I have

  I can recreate the error on both my Virtual Center servers.

  Thoughts?  Update my conclusions after dinner.  I need to eat.

  
  
  If you are evaluating your karma, please consider awarding points to 'Correct' or 'useful '.

  Sean Clark - vExpert, VCP- http://Twitter.com/vseanclark - http://seanclark.us

  your vCenter server FQDN > 32 characters would cause this error. they are > 32 tanks?

  see you soon

  Lee Dilworth

  PS: If you want to use self-signed certs, see also: http://kb.vmware.com/kb/1008390

• TLS fails on linux self-signed certificates

  on firefox 38.1.0 under centOS 6.6 I have some problem with TLS.

  When it first happened I re fact cert using keys of 2048 bytes. It seemed if address the issue when you navigate to similar addresses to https://localhost/somesite, however, I have try https://localhost:10000 with the fact that it still fails:

  An error occurred during a connection to localhost.localdomain:10000. The certificate server included a public key which was too low. (Error code: ssl_error_weak_server_cert_key)

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  The signing certificate is algorithim-> PKCS #1 SHA-1 with RSA encryption

  The algorithim public key is-> PKCS #1 RSA encryption

  The key has been creating 07/06/15 for a period of 10 years is a Version 1 cert issued by myself with the info
  E = [email protected]
  CN = localhost
  UO = hq
  O = permite
  L = Stone Mountain
  ST = ga
  C = us

  It was a problem of webmin.

  To fix this /etc/webmin/miniserv.pem edition replace the cert and private key sections.

  Use a new generated key and self-signed certificate. If you follow the instructions of centOS, the location of the files are /etc/pki/tls/private/ca.key and /etc/pki/tls/certs/ca.crt

• Application Builder-how to get rid of the savings going to project after generation?

  Hello

  I'm using LabView to project continuous integration with Jenkins. I have a vi that runs test cases is build of the project, then bed information on the results of Jenkins.

  After a success, there is a warning that I have unsaved changes in the project that I wanted to build. This message is to close labview and jenkins of the display of the results

  Here I found information about this warning at the first "Note".

  http://FTP.datx.com/public/DataAcq/LV-link/LVLinkWebHelp/Building_and_Distributing_an_Application.ht...

  How to get rid of this warning, or save changes automatically, so that I don't have to click 'Save' after each generation?

  Thank you

  Karol

  First of all, you don't want to get rid of this warning. It is this backup which makes the work number version auto-incrémentées. LV has to save the new version number in the project.

  Yes, you can make a backup. Somewhere, to do the code LV, who runs a program generation. At the end of this process, you need to save the project. There is a method to do project.

  I wrote a small program for me to open a project, perform the selected builds and copy the installer resulting in a USB key.

  Mike...

• System hangs when the computer sleeps with error KMode_Exception_Not_Handled after generation installed 9926

  Since the new version update (9926), whenever my computer goes to sleep or when it is left for several hours compress I get unhandled KMode Exception error.  I deleted a suspicious program who has problems during the previous generation, but that made no difference.  When the computer restarts, I wonder if I want to use the previous windows platform and I encounter the KMode problem, but after a day or two, the computer did an update to 9926 and I started having the problem again.  I looked for all devices that are evidence of a driver problem and have not found any.  Tech is able to examine the file DMP to give me a clue as to the program/device must the fixed driver so that I can get past this error?  Here is a link to the folder that contains the file.

  https://onedrive.live.com/embed?CID=932A5B907D806E8A&RESID=932A5B907D806E8A%21225306&AuthKey=AMaX68Y4-fpbXcE

  I looked in the pilot and I have the most up to date, but I was able to solve the problem until the next update by turning on my screensaver and do not allow the HARD drive to sleep.

• Windows Explorer crashes on XP after Session VPN

  I'm usually in the office and I have 2 directories of intranet server mapped with persistence. The problem I have is when I'm not at the office and I do a VPN connection in our network of offices to use these servers after I leave the VPN connection, the next time I open it it crashes and don't recover without having to restart Windows Explorer. Any ideas how to avoid this?

  Hello

  I suggest you to send your request from the link and check.
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• RV082 and fast VPN

  I tried to configure my router RV082 all OE quick VPN access. I bought this router a few years back with the intention of setting up a VPN. Now that I need to do, this product is no longer supported.

  In any case, down to the problem - I can not past the first problem. I get an error that says: "Unable to connect" and it lists 5 problems:

  1. wrong password

  2. no IP address for the network card

  3. incorrect server address

  4. you may need to disable your windows firewall

  5. conflicts of IP addresses with the subnet of the remote VPN server

  I just tackle these questions

  1. I am using the correct password

  2. I have an IP address, I can get on the internet

  3 server address is correct

  4. do not use the windows firewall (I have even disabled my firewall, netgear home but no help)

  5. work 192.168.0.x subnet, host is 192.168.1.x, different subnets.

  When I'm at home, I can connect to the remote router configuration page, but I can't get anywhere with fast VPN. I tried this on 3 different networks, all give me the same answer. I am inclined to believe that this must mean I'm incorrectly configured on the router, but I followed all the steps as described by linksys. I even upgraded to the latest firmware and the latest version of quickVPN all to nothing does not.

  I use access rules to guide the SQL traffic to one of our servers, that is the question? Any ideas?

  Thank you for your response. You are right it is not access rules, but it is the configuration of the router. In the tab "Firewall", you need to enable HTTPS. There was nowhere in the product manual update, I downloaded, but it was on the info for the Firewall page tab. The only reason why that I disabled it HTTPS is that my remote management session with the previous firmware would sometimes close unexpectedly under HTTPS. In any case, connection works fine now.

  So my next question has to do with the speed. This is the first time I've gotten a quick VPN to work. When I connect to my ping time to a server is 60-80ms. At work, it is 1 ms. It is common to have a time big lag? Unfortunately at this slow speed this VPN may not be such a solution. I used a PPTP VPN in the past and latency are not too bad, but of course there is no encryption that is important here. Any thoughts on the speed?

• Only IPSEC AnyConnect VPN certificate authentication

  How can I activate "authentication certificate only" for AnyConnect IPSec IKEv2 VPN connections, so that users do not have to enter the user name and password.

  Basically, deploy the CA, and then deploy the VPN.

  This example uses the Microsoft CA, but you can use the built in place.

  https://supportforums.Cisco.com/blog/152941/AnyConnect-certificate-based-authentication

• "ITS creation failed" problem for IPSec VPN

  An ASA 5100 is used to provide VPN access for my business. The configuration was made by a permeable man who has been missing for some time, and the configuration used to be OK until this morning. This morning, some users reported that their VPN would have fallen once got connected. I checked the ASA and ASDM, I see every time when user deletes, it IPSec tunnel is always action. Furthermore, I faked the problem and got the newspaper of errors such as:

  1 11:14:45.898 12/06/07 Sev = WARNING/3 IKE/0xE3000065 could not find an IKE SA for 10.2.1.8. Abandoned KEY_REQ.

  2 11:14:45.898 12/06/07 Sev = WARNING/2 IKE/0xE3000099 could not open the P2 generate a new key: error detected(Initiate:176)

  3 11:14:45.898 12/06/07 Sev = WARNING/2 IKE/0xE3000099 cannot open the QM (IKE_MAIN:458)

  On the side of the AS I did "debug crypto isakmp" and 'debug crypto ipsec' and I got the following errors:

  iscoasa # ERROR IPSEC: expiration of the timer of the asynchronous operation, SPI: 0x114CA5B6, user: roeladmin, peer: 202.x.x.70, time: 2 seconds, ctm_ipsec_create_sa:856

  IPSEC ERROR: Material outside ITS create command failed, SPI: 0x114CA5B6, error code: 0 x 17

  IPSEC ERROR: Asynchronous Operation timeout expired, SPI: 0x61BE2022, user: roeladmin, peer: 202.x.x.70, time: 2 seconds, ctm_ipsec_create_sa:856

  IPSEC ERROR: Cannot add a user auth, SPI input: 0x61BE2022, user: roeladmin, peer: 202.172.62.70

  IPSEC ERROR: Cannot create an inbound SA SPI: 0x61BE2022 document

  IPSEC ERROR: Unable to complete the command of IKE UPDATE

  12 June at 14:25:13 [IKEv1]: Group = LANWORKS, Username = roeladmin, IP = 202.172.62.70, error QM WSF (P2 struct & 0 x 4699058, mess id 0xf37ec6f4).

  12 June at 14:25:13 [IKEv1]: Group = LANWORKS, Username = roeladmin, IP = 202.172.62.70, peer table correlator Removing failed, no match!

  IPSEC ERROR: Material Inbound ITS create command failed, SPI: 0x61BE2022, error code: 0 x 17

  It shows that ITS creation has failed. But I can't find the problem with the configuration. Can someone help me on this? Thank you

  Outgoing material ITS create command failed, SPI: 0x114CA5B6, error code: 0 x 17

  It is a hardware problem, reset the firewall and it will work, I saw 4 times in different ASAs

  Please hate the post if help.

• Charger won't install after generation working on several Versions of a device software, 4.2.1 on

  I want to have a version of my application for all the trackball / wheel peripheral, so I built using JDE 4.2.1.

  It installs and runs correctly on a phone running a different version of the software for the device (4.5.0), using javaloader.

  However, after he files .alx, Desktop Software 4.7 Application Loader to install it on the phone.  I select the .alx files and he says: 'Research available device software', and then fails with the error "no additional applications designed for your device were found."

  According to the RIM, I have to compile using the JDE corresponding to the more ancient version of the application can run on a software device, but it should also run on newer versions of the software of the device.  So, why the charger does move a 4.2.1 .cod on a 4.5.0 device?

  I need to compile separately for each ! @# $% software version of the device to 4.2.1 upward?  How would be communicated only as a simple distrubution?  Can a .alx files point to multiple .cod and automatically select the right one for the phone?

  Again, the application installs and works perfectly using javaloader.  It's a 4.2.1 running on a Curve 8330 4.5.0 build.

  Thanks in advance of experts to help him.

  OK, forget the question

  It seemed that it was giving an error as it was inconsistent with the camera, but she added the app to the list.  I clicked on the box and installed.  Sorry people, I am a rookie obviously :-D