Distribute the email back to PDF not correct. May not know how to change?

Similar Questions

• my language has changed between English and symbols, and I do not know how to change back

  my language has changed between English and symbols, and I do not know how to change back

  Hello Joe Barton,

  Have you tried to change the display language, from the link above?  Alternatively, you can try to perform a system restore, if it happened recently.  Did you do a full scan with your antivirus software and ran all the malware removal?

  Please let us know status.

• Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Greetings jenniferfrom46,

  From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

  If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

  Have a good!

• I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

  I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

  You can repair XP or try the following:
  http://support.Microsoft.com/kb/917964
  http://support.Microsoft.com/kb/307545

  TO

  Re - install http://support.microsoft.com/kb/978788

• I accidentally deleted my toolbar with the help of file my homepage etc view internet explower and I can't get him back because of not knowing how. Please help me.

  See above for more information on remove me my toolbar and not knowing how to retrieve

  Right-click on an empty area other toolbars and make sure that the menu bar. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I want to install the PowerPoint Viewer and do not know how... can someone please send me the correct link for it?

  Hi, when I get an email to PowerPoint I click on enregistrer to save on trombone, then save it to my documents... then I must open documents to get the powerpoint e-mail... is there a way I can just click on the paperclip and powerpoint automatically opens the email instead of going to all the steps, I pass by?

  ....... so I open documents to get the email of powerpoint...

  Does this mean that you were able to open the pesented after that that it has been saved in the documents folder?

  If so, this means that you already have the PowerPoint Viewer.

  Your problem is... impossible to open powerpoint DIRECTLY from email.

  Assuming you are using Windows Mail, try this tutorial...

  http://www.Winhelponline.com/blog/unable-to-open-PPS-ppt-from-Windows-mail-or-WLM/

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• My Windows Photo Gallery has incorrect time for good that my computer is correct. I know how to change the time, but wanted the exact time is displayed automatically when you scan photos etc as before.

  Time is incorrect in Windows Photo Gallery and I would like to do this automatically scanned early for photos instead of my change time.

  Hi Sardai,

  Unfortunately, this information is not always accurate. If you took some of your pictures in a different time zone, for example, the time recorded for these pictures could be incorrect by several hours. The camera can also be set to the wrong date and time. Or, if you're scanning photos, ta date will reflect the date that they have been digitized, not the date on which they were taken. All these anomalies can be adjusted manually.

  To change the date or time

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. If you do not see the details on the side of the window pane, click information on the toolbar to display it.

  3. click on the image you want to change.

  1. to select more than one picture, hold down the CTRL and click each picture you want to change.

  4. click on the date at the top of the details pane.

  5. click on the arrow next to the date and then click the correct date on the calendar.

  6. click on the time at the top of the details pane.

  7. Select the correct time.

   

  To adjust the time for pictures taken in a different time zone

  1. open Windows Photo Gallery by clicking on the Start button, all programs, and then clicking Windows Photo Gallery.

  2. right click on the image you want to change and then click on change time taken.

  To select more than one picture, hold down the CTRL and click each picture you want to change, and then click a picture when you are done.

  3. in the change to box, type the number of hours to change, or click the up or down arrow to select the number of hours. To make the new start time, type a minus sign (-) before the number.

  For more information, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-the-date-and-time-a-picture-was-taken

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I downloaded a music software and then deleted. It has changed my title of the home page and I can't change back to Firefox. I don't know how to change this, but it does not work. Can you help me?

  Music software is imesh and I changed my title of the homepage with Firefox, in my internet options for Windows. Whenever I close the page, the home page changes back to the imesh search page. I deleted my computer including imesh go to windows Explorer and remove imesh all that I can find nothing will do.

  Steps to remove iMesh as your home page:

  1. In the address bar, type Subject: config and press ENTER.
  2. In the filter at the top text box, type: keyword. URL
  3. You will be presented with the entry for the keyword. URL
  4. Double-click it, delete the channel and press OK.
  5. Release of Firefox.

  Then, you must assign the desired as your homepage site. Open Firefox and follow the instructions provided in this article: How to set the home page.

• by mistake I changed the program icons on entire systems that it and do not know how to change back

  Please answer the question as soon as possible

  Hello alisumar,

  Please see the information in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-icons-from-the-desktop

  You can also check the box for the default icons on the same personalization page.

  Let us know if this helps solve your problem.

  Thank you

  Marilyn

• Cannot open certain e-mail messages. He askes me to define an association in the Control Panel, but do not know how to configure...

  Remember - this is a public forum so never publish information such as email or phone numbes:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Monday, January 31, 2011 19:44:07 + 0000, granny, sharon wrote:

  * Remember - this is a public forum so never publish information such as email or phone numbe * s:

  * You have problems with programs * error messages * recent changes made to your computer * that you have already tried to solve the problem

  Please, in the future, remove all the verbiage above when you ask for a
  issue. It has nothing to do with your question. And ask your
  questions in the body of the message, not in the title. The title
  should be used only for a brief description of what is the question
  everything.

  You say 'impossible to open certain emails', but makes the rest of your title
  It sounds like you can open the e-mail message, but you cannot open
  the accessories that come with them. Is this correct?

  If that's right, read the following:

  To open a file (if get you it as an attachment or any other)
  by the way), you must have an appropriate program installed for him (be it
  the program that created the file or a compatible program). So if you open attachments depends on what kind of files (the
  extension, the characters after the dot at the end of the file name)
  attachments are.

  If you get the files .doc or .docx, these were created by Microsoft Word
  (or a compatible program) and to open them, you need Word, or
  compatible program. Microsoft Office Home and Student includes Word.
  You can also use OpenOffice (free software that is largely compatible
  with Microsoft Office), WordPerfect, etc. Or you can download and
  Install the free Microsoft Word Viewer
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en
  or http://tinyurl.com/2w3s6z the viewer will allow you to read existing
  files, but not create or modify them.

  To open .pdf files, you need a viewer pdf and Microsoft Office Home
  and student will not help you. The standard pdf viewer than most people
  the use is Adobe Reader, and you can download free of charge
  http://get.Adobe.com/reader/

  It is more likely that you don't have a proper file installed
  that you don't have the correct association, but if a
  an appropriate program is installed, just right click on any file .doc
  and choose open with. Highlight and select Word, select the check box
  "Always use this program...". "and click OK. It should work fine
  from then on it.
  The above paragraph is how do to the files .doc and Word, but for
  other types of files, replace .doc with the extension of the file type and
  Word with the appropriate program.
  If you try in vain to open other types of attachments,
  Please tell us what types of files they are.

  Ken Blake, Microsoft MVP

• The 1068__I spooler error do not know how fix this problem can anyone help?

  I get the spooler error 1068, I said buying registrybooster2010 but which costs £20.00 and nothing helped!  I need to get this sorted ASAP, can anyone help please

  Hello

  Registry Booster and similar programs are all hype and snake oil, they can fix practically anything and
  often the cause of big problems on their own. Request your refund.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• cannot move the application window = Windows does not know how to do windows.

  It is quite ironic that the company that filed the name windows does not the best job to design a GUI of windows desktop:

  1. If I run a browser with multiple tabs (usually 30) opened with a connection with limited bandwidth (cable modem), the browser window opens but is locked in place (it cannot be dragged by the grab bar) until all the tabs are loaded.  ~ 30-40 seconds.  What is happening with this?  Who designed the graphical interface of Windows?

  Furthermore, is not a failure to set bookmarks, multiple tabs are left open because many activities underway, that's what tabs are for.

  2. If a secondary application window / "door" is open, the application window is locked in place.  If an attempt is made to drag the window of the grab bar, the pane starts a queasy nod.  The pane must be closed before the window can be moved.  The component can then be reopened to complete the desired operation.  Is this a real problem?  Well Yes, sometimes a lot of time is wasted juggling and spinning to get the installer of Windows GUI/desktop as you want, for example: obtaining information from a window of the underlying application and before deciding what to do.  This applies to windows, not windows, not MAC OS, Linux not.  Windows forever.

  Re. 1. If I run a browser with many tabs...

  It is not so much the result of the design of GUI but a work function how graphical operating systems.   Events, such as the mouse messages are queued in a message loop, and there is a communication between an application program and Windows if a callback procedure.  The operating system cannot always respond instantly when an application is busy as any other treatment happens.  Open the 30 windows! on the application startup is a lot of treatment and is bogged down the loop CPU and message.   If you want an instant answer to OS any level of demand, you can look to a supercomputer rather than a PC multi-million dollar.

  Re. 2. If a secondary application window / "door" is open, the application window is locked in place.

  The "sub-sub-window/pane' is properly called a modal dialog box.  Windows are usually coded in modal form (which means that they should be closed before a continuous program) when they include a message critical, or can be used to configure the application settings.  If you would like more information see http://en.wikipedia.org/wiki/Modal_window

  These two conditions certainly exist in other operating systems.

• I have the CS5 disk but do not know how to convert it to a digital file for my new desktop Mac OS 10.9, which doesn't have a disc drive? Thank you

  Please help convert my CS5 disk to download on my new desktop MAC OS X10.9

  You can download CS5 from this site

  Download the CS5 products

• Game services of Google is to play with my email and I do not know how to uninstall them!