Lsass.exe ended in unexpected ways with code 1073741819 status.

Similar Questions

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Receive the error message "the system c:\WINDOWS\system32\services.exe process terminated unexpectedly with status-1073740972 code".

  Original title: c:\WINDOWS\system32\services.exe

  I get: the system process c:\windows\system32\services.exe ended unexpectedly with the code of State-1073740972. The system shutdown will be present and reboot. It's driving me crazy! Help! PLEEEASE

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 4 to reset the computer to start as usual after the boot process.

  How to configure Windows XP to start in a "clean boot" State

  Hope this information helps.

• I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 op

  I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 open, the memory usage does not go down and left to the 700 MB. Thank you for your attention. Cordially, Ricardo

  ID of the Crash

  BP-765e3c37-0edc-4ED6-a4e9-7ed612100526

  See http://kb.mozillazine.org/Firefox_crashes and Firefox plant - troubleshoot and prevent assistance fixing crashes

• Laptop off with code no. 54673540. Please provide a way to solve this problem, thank you.

  Hi there, I need help for en-able my CQ41 notebook, when I have not 3 times between the correct admin password and has been disabled with code no. 54673540. Please provide a way to solve this problem, thank you.

  Hello

  Please try:

  41751586

  Kind regards.

• Error: wininit lsass.exe windows server restart, event ID: 1000, 1001, 1015, 6005, 6006

  Hi everyone, I recently joined in a Banking Corporation as a leader of IT below support that I explained about an error that is impossible to fix.

  This company is running windows server 2008 r2 standard 64 bit OS sp1.

  HP proliant DL380 G7 intel xeon
  system processor: intel xeon E5620

  This company is facing this problem since April 2014 to cultivate the date, but the question not yet fixed because there is no COMPUTER administrator in this endeavour to maintain this server. So, in this company, I'm the only guy with COMPUTER knowledge and my management was waiting for me to fix this error and to run the server without any problem.

  The last few months I've corrected several server issues related in this society as windows update, windows daily backup, SQL server backup, user permissions, disk space low and network troubleshooting and equipment computer issues etc...,

  But come to this lsass.exe I am unable to solve this problem I tried many ways to research online, but not yet fixed. Below you will find the details.

  *) fix for windows server 2008 R2 Standard sp1

  After the failed to install installation
  Fix for Windows (KB2545850)

  *) Tried to use the system tool
  But failed to solve problem

  *) I tried this command at the command prompt
  sfc/scannow
  result
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  *) I also tried to change the registry of one of the web links of dell values, but there is no change at all.
  http://www.Dell.com/support/article/us/en/19/SLN291309/en

  *) I thought installing the fix and some other updates in safe mode only to try my luck, but when I tired to start the server in safe mode it takes a long time to start in it. But, I'll try again if this issue is going to fix through safe mode then please advise me on this.

  So to come back to this question, at the time of the restart, a small window will pop up as below.
  Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  *) I tried this in shutdown command prompt cmd - to stop this judgment but does not any.

  *) I've tried many ways to solve this problem, but none of them worked for me even I tried to upgrade from sp1 to sp2 but could not do so for the following reason:
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  After downloading the software from the link above and when I tried to install error appear below.
  This service pack does not apply to the version of windows running on this computer.

  It is the only question that is impossible to fix. So, I need expert help to resolve this issue as soon as POSSIBLE.

  Note: I can not reinstall the operating system on this server because it runs many applications on the SQL 2008 database and also it is already configured with many services and I don't really know how many applications do I need to take a backup and how to configure manually. so if I reinstall OS and if I'm bored configurations or settings and then it will be difficult for employees who work on these applications. So I don't want to take the risk of doing as I said I am new to this company.

  Additional information: this sever when ever it will pop up as server will restart in one minute then it restarts to 3 times without any gap, then after an interval extended from 3 to 4 hours, then it will follow even as I said above. To understand better, I'll give you this good example: If the server restart to 09:00, then 2nd reboot will be at 09:02 and the 3rd reboot will be at 09:04 and then after 3 to 4 hours apart, as about 13:00 it restarts again for 3 times vice versa.

  Even I understand that I have to reinstall the OS to fix this stupid problem which is like a nightmare for me, but right now, I can't. So, please help me to solve this problem without reinstallation of server operating system.

  I expect the best answer to my question that will solve my problem without any problem to this server.

  Below the five examples are the main reason for my server restart. If you need anything that either more information please advice me I will answer according to your instructions.
  Event ID 1000
  Event ID 1001
  Event ID 1015
  Event ID 6005
  Event ID 6006

  Below, I have collected more information of the observer of events and even from now this server restarts again due to this error, I don't know what to do...!

  1st error:

  -System
  -Supplier
  [Name]  Application error
  -Event ID 1000
  [Qualification] 0
  Level 2
  Working 100
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479745
  Application of channel
  Security
  -EventData
  Lsass.exe
  6.1.7601.18443
  5348920c
  ntdll.dll
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  220
  01d16482b15bac9c
  C:\Windows\system32\lsass.exe
  C:\Windows\SYSTEM32\ntdll.dll
  5518c7e0-d091-11e5-88FE-68b5996a1808

  1 details of the error:

  The failing application name: lsass.exe, version: 6.1.7601.18443, time stamp: 0x5348920c
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000374
  Offset: 0x00000000000c4102
  ID of the process failed: 0 x 220
  Start time of application vulnerabilities: 0x01d16482b15bac9c
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  2nd error:

  -System
  -Supplier
  [Name]  Windows error reporting
  -EventID 1001
  [Qualification] 0
  Level 4
  Task 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479746
  Application of channel
  Security
  -EventData
  0
  APPCRASH
  Not available
  0
  Lsass.exe
  6.1.7601.18443
  5348920c
  StackHash_802c
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  0
  5518c7e0-d091-11e5-88FE-68b5996a1808
  4

  2 details of the error:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: lsass.exe
  P2: 6.1.7601.18443
  P3: 5348920c
  P4: StackHash_802c
  P5: 6.1.7601.18247
  P6: 521eaf24
  P7: c0000374
  P8: 00000000000c 4102
  P9:
  P10:
  Attached files:
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  3rd error:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Wininit
  [Guid]  {206f6dea-d3c5-4d10-bc72-989f03c8b84b}
  [EventSourceName]  Wininit
  -EventID 1015
  [Qualification] 49152
  Version 0
  Level 2
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479747
  Correlation
  -Execution
  [Pr

  ocessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  C:\Windows\system32\lsass.exe
  255

  3 details of the error:

  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  error 4:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6005
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 35:43.000000000Z
  EventRecordID 479787
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  CreateSession
  00000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000000
  In bytes
  0000: 00 00 00 00...

  4 details of the error:
  Winlogon notification subscriber takes a long time to handle the notification event (CreateSession).

  error 5:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6006
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 36:39.000000000Z
  EventRecordID 479792
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  116
  CreateSession
  04000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000004
  In bytes
  0000: 04 00 00 00...

  Details of the error 5:
  Winlogon notification subscriber was 116 second (s) to handle the notification event (CreateSession).

  Thanks forward,

  SAI

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• Windows 7 RTM - lsass.exe error causes Windows reboot

  I got my copy of Windows 7 RTM de MSDN AA and have been in love ever since I installed it, all except for one problem.

  My computer is part of a domain the active directory.  I receive the following two errors:

  The failing application name: lsass.exe, version: 6.1.7600.16385, time stamp: 0x4a5bc155
  The failed module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5be02b
  Exception code: 0xc0000374
  Offset: 0x00000000000c6cd2
  ID of the process failed: 0 x 234
  Start time of application vulnerabilities: 0x01ca23c92c9a9900
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 1772eae8-9017-11de-a36a-001e8cb7e844

  About one second after the error, I get the following error:
  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  Then, a message saying "Windows has encountered a critical problem and will restart automatically in a minute.  Please save your work now. "and then the computer restarts a minute later.

  I've found that I can pose the problem of two similar ways:
  1. I open Windows Media Center, and then watch videos, listen to music, etc..  Media Center to close and lock my computer.  Then immediately after, I unlock the computer, the message is displayed.
  2. I have block my computer, then unlock it then (I can do this as many times I love him without the following message is displayed).  As soon as I open Media Center the message appears.

  That there seems to be a problem in lsass.exe or ntdll.dll I pulled copies of my installation disc and ran a MD5 checksum by comparing those in C:\Windows\System32 for those from the installation disc.  There is no difference between them.

  Any help would be greatly appreciated.

  Hmmm, the problem seems to have fixed itself automagically.  I do not even install Windows updates except for the regular update of Windows Defender.

• PC Hung and will now restart not [XP Pro SP3]. SYS error at startup as follows; Lsass.exe - system error. The endpoint Format is invalid.

  Original title: PC Hung and will now not restart not [XP Pro SP3]

  PC Gardner - [open Excel, open outlook, being viewed in PDF and word doc being edited].

  Restarted, then - loading SYS error window at startup as follows; lsass.exe - system error. The endpoint Format is invalid.

  Can not very well, or at the end of the message have to turn it off. Tried to reboot several times, same result.

  Just before this happened was a dialogue window appear on my PC, which indicates that Microsoft wanted to investigate problems of software they had observed on my PC that I had not sent the reports to. I approved this request and they took the reports...

  Am currently bimbling turn of safe mode with networking.

  Any smart people able to help me please?

  Thanks George

  Hello

  We will try these steps and check.

  Step 1: Try using some know last good configuration and check.

  Step 2: System Restore from safe mode or safe mode with network.

  Reference:
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  To start the computer in safe mode
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• Lsass.exe system error object name not found, unable to start Windows in any mode.

  I am working on a friends computer who has a problem, it does not boot in any mode.  This includes everything and all alternate Mode without failure, last known good Configuration and other options in between.

  The computer is an old one but running Windows XP with Service Pack 3 and is updated from a few months ago.  He had a program to update AVG as well as several anti-spyware installed SpyBot, Adaware, and Malwarebytes programs.  Sometimes, the computer had a virus or spyware that was eventually deleted by the user with these programs in the past.

  I searched the internet for at least 8-10 hours looking for solutions without real success.  If not all of you with this problem, most eventually do a full reformat their hard drive.  This owner does not have a recovery disk (lost?) with their computer for that and they have important documents that they would be saved.  A solution (last resort) is to remove the hard drive and put it in my computer to copy documents on a cd/dvd.  It is very likely to buy a newer computer at this stage anyway, but needs these documents

  -----------------

  What happens is after the start screen of Windows, but before the Welcome screen, a box with the lsass.exe system error error: object name not found appears.  Clicking on it just restarts the computer to restart the process.

  I used a boot Norton cd to test the virus in case it might be this worm Sasser, sometimes associated with this error and it is clean. so I really doubt that this problem is associated with that.  Also used checks and drive to scan to check for errors.  Don't check, there is no way to go back to a previous restore point or configuration.

  Tried to use the recovery console out of my Windows XP installation disk: in this case I tried to develop a copy of the file lsass.exe on the hard drive, but it could not extend the file.  I tried several times with the same results.  Don't really know if that would have helped it worked.

  At this point, I'm really at a loss on how to continue.  Any suggestion would be appreciated and thanks in advance!

  Your friend's computer is not likely to be infected by the Sasser worm that this virus is many, many years now. Extract the data on the drive and do a clean install/factory restore of Windows. You can usually buy the mftr computer recovery media. (if an OEM brand like HP, Dell, etc.). low-cost. If you decide to reinstall Windows, test the material first to make sure it's healthy. Or skip reinstallation if your friend is going to buy a new computer and just take the data for him.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot
  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  And for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Other services and support TCP/IP over NetBIOS in unexpected ways

  Original title: completed service in unexpected ways

  I have a problem with the windows services on two computers running Windows 7 Pro 64 bit. Both computers have four following services keep stop, all at the same time. In this case permanently at random time intervals. Second computer has a two other services below that also stop.

  Reinstalling windows did not help. Install the latest windows updates or hardware drivers did not help either.

  Thank you for all that help or referrals you can give me.

  The support TCP/IP NetBIOS service ended unexpectedly.  He did this 10 times.  The following corrective action will be performed in 100 milliseconds: restart the service.

  The service finished Windows event log in an unexpected way.  He did this 10 times.  The following corrective action will be taken in 60000 milliseconds: restart the service.

  The completed Client DHCP service in unexpected ways.  He did this 10 times.

  The Windows Audio service ended unexpectedly.  He did this 10 times.  The following corrective action will be taken in 60000 milliseconds: restart the service.

  Two additional services that fail on the second PC

  

  The Security Center service ended unexpectedly.  It has done this 1 time.  The following corrective action will be taken in 120000 milliseconds: restart the service.

  The service provider HomeGroup ended unexpectedly.  It has done this 1 time.  The following corrective action will be taken in 60000 milliseconds: restart the service.

  Hi Corwin,

  Thank you for an update and share information that allowed that it would help the other members of the community to solve these problems.

  We are happy to know that you have solved the problem.

  To respond to your request, I suggest you check the link to see the reasons behind the question:

  http://social.technet.Microsoft.com/forums/Windows/en-us/a4216d83-cc81-458e-a2c6-5761077b8baf/IPv6-causes-Windows-services-to-crash

  Please let us know if you have any other questions about Windows.

• lsass.exe system error

  I searched and could not find that anything related to this issue.  I get an error message when I try to launch VMware Fusion.  He'll be trying to open Windows XP and then end with this error message:

  Lsass.exe system error

  The specified image file did not have the correct format, it did have an initial MZ.

  I'm under VMware Fusion 2.0.4 on a MacBook Pro with Mac OS X 10.5.7

  When I click OK on the error message, it starts trying to open Windows XP and ends upward, the error message in an infinite loop.  Everything worked fine until I closed my VM again. I usually just hang, but I closed this day there and then closed merge and completely off my MacBook.  So the next time I turned on my laptop and I tried to run the merger is when I received the message.

  Did I leave any important information necessary to solve this problem?  I'd appreciate any help I can get with that.  I have one Windows program I really need to use and I can't seem to him.  Thank you very much!

  Cheryl P.

  Looks like you may have been affected by the Sasser virus.  Search removal tools, see if you can start the Windows client in safe mode (click in the VM window immediately after power on, and disappears from the display of the POST, hit the F8 function key to display the Windows Startup menu, select Safe Mode).  If not, probably the best to restore your virtual machine from a previous backup (you did one, right?)  It's so easy with VM, because they are simply a set of files which can be easily compressed/archived in a single backup file).

• Problem with code in tables

  Hi, first post... New DW cs4 user.

  I am trying to list a few items for sale on a Web site. The company that performs the processing of online payments generates a code for me to use to produce a button for buying... and there is the challenge.

  I'm putting the code in a table and its does not work. The code is a "payment button" generated by a payment company called Skipjack. If I place the code, say... on the bottom of the page it looks fine. But I need to go to a specific place on my Web page, the payment button. Please help... pay the boss awaits! Laughing out loud... Here is the page... http://www.ambitioncharters.com/packages.html ... the button is there, but I'm trying to put the different packages on the page... and then put the code for the price to the right of the product discrpition or under... I thought that a table would be way more "pretty" to achieve... but like I said, when I put the code, they give me the table... the code appears in the cell of the table instead of the button I need to go there... weird!

  Here's the code...

  <!-beginning of the "good ezPay command'-> code
  

  
  < input type = "hidden" name = "bonito" value = "D/inOUaqBqrBUe5T5fdgKs9zMySFmAjH21Kmx/TaWu0uAeseJidIoeVbnct7MtJyfdMz8NeGUuJgfeaSSe ZTq9UtbQLaXoQFowULZj41NgUFFbzT4cE1ApCJDP8RWU6pLPOEIuJeaDPQ4ia1OEzHRh7dR7PkyLkQyTmA9wrm2ULU HEKGtMpDU8fRvMx3DjnDBcP/0eDi5A8jkvcOt4/3qRCVUoTbNVqYaREzlzZoAnkQm8VLJI3JoU54wC8wTEewiKfXRr sTG5Bvv/XZmZHB3XXnng2Dn7nGZNkTz1rcJT1r5O4mM6 + oVYt3AnvP2jVi/l12 + oz + dAm UjyJneyJRstdu50eBHzv1E1Y + V9lptkBBS2xObmAF/urmWmGAtuc0ILByOKFe2Wg22zsuvMY2Tn3GBxe1sGC7d9uFl2gay3LePhfBG7 + gHvfSji SB6h5M0m76CWWjUHXikVxX2VKNtm3o + JAhSBE + AemfUWTrdwGcMZbljp7mBRGmiMOXz/2hc8MekCV/EdI9KDx1gt6C pw ==" / > "
  < input type = "hidden" name = "ezPay" value = "ZWyf7/x88PNVT9almNuR9MsthaKDhaRZ8QW3IiLIDk4 =" / > "
  < input type = "hidden" name = "creator" value = "44H7TtPK3SQ29yfCpHy5EA ==" / > "
  < input type = "submit" name = "Button" value = "PlaceDeposit" / >
  < / make >
  <!-end of "good ezPay command'-> code

  kylesalone wrote:

  Yes, it's true... the code, not the button, appears in the cell...

  I'll post the page with errors on it... now, as you can see, the formatting is quite climb... It's at least on my mozilla.

  All its supposed to be left indent... some is centered... and some of the 'deposit' buttons do not work.

  http://www.ambitioncharters.com/packages.html

  Suggest you read the code for the button one that works and then look at the code for those who are not. You will see the button that works is encapsulated in a form tag. This provides the necessary information as what is supposed to happen when the button is clicked.

  method https://vPOS.Skipjack.com/ezPay/Order.asp"="post">

  Not sure why two of the buttons are centering upwards and not left aligned... the code is a bit messy. If you insert your cursor to handcell that contains buttons and tables and go to the property inspector and choose horizontal align left in the menu drop which seems to do the trick.

  Its something to do with your styles css because if you detach all the buttons left alignment. And regarding the css well anyone who attached requiring many models to a page of shot in the nuts.

• Help!  Get pop-ups with CODE of ERROR: sec_error_X1X510_A

  I have an iMAC end of 2012, 3.4 GHz Intel Core i7, 16 GB 1600 MHz DDR3. NVIDIA GeForce GTX 680MX 2048 MB, El Capitan iOS

  When you use Safari, Google home page, I type a domain and it goes to what I believe is a pop-up fake Apple Support with CODE of ERROR: sec_error_X1X510_A.

  Need help solving this. THX

  You have probably installed some adware. Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Satellite A10 - lsass.exe constantly reading & writing HARD drive

  Hello!

  Two weeks ago, I asked here a piece of advice from my Satellite A10 has bombarded me with messages on "bad clusters" and "not being able to write this or that" on my HARD drive. I thought that my HARD drive was too old and bad functioning, and maybe it should be replaced.

  Now, I know that the cause of my problems is Windows XP.
  As soon as he starts lsass.exe this horrible process is constantly read and write something on the HARD drive.

  As a result, it keeps my HARD drive so busy that all programs that I use can not work properly: when they want to write something on my HARD drive it must wait and wait. And I think this incessant and door reading wrote on the poor HARD disk.

  I googled for a solution (it seems that there are other victims who are unable to get rid of the unwelcome lsass.exe) and I tried to prohibit files indexing and system recovery but these solutions do not work for me. Is there another remedy known to this naughty lsass?

  I have Windows XP Toshiba Recovery Disk and lately this lsass were so widespread that I can not download updates for XP SP2 or SP3. So, if there is a good solution, it must be for the Virgin XP SP1...

  Help, please!

  Hello

  Lsass.exe belongs to the Windows operating system and it s a Microsoft file!
  It is a path to the file: windows\system32\lsass.exe

  I found these details:
  + "lsass.exe" is the local security authentication server. It checks the validity of the user on your PC/server logons. It generates the process responsible for authenticating users for the Winlogon service. +

  I put t think that the file can be removed or should be removed.

• Lsass.exe endpoint format is invalid when installing servre 2003

  I use Win XP Pro 32 bit, with my good setup PC with 500 GB HARD drive and 2 GB of RAM,

  now, I try to install Server 2003 EE 32 bit, as a dual operating system with XP, I start my PC from CD, the installation, server 2003 Setup copies all the files with success and the system is restarted, the installation program will automatically start and page where "before Installation, windows install... just rite this configuration point invite me an error message.
  "the lsass.exe system error exit point format is invalid.
  When I close / click OK system restart again and continue the same problem.
  I changed my settings from registry DWORD/SystemPage to 31000 means, I check all my material and components of all the solutions I have Internet but the problem is still there, my XP works well, I'm not able to install Server 2003... my DVD is OK because I install Server 2003 in one of my other PC with the same DVD, it works.
  How can I solve this problem
  Please help me

  Hello remy Shama_614,.

  Microsoft Communities is for consumer issues with Windows 8, Windows 7, Windows Vista and Windows XP. If you have problems to install Windows Server 2003, it would be better treated in the TechNet for ITPros forums.
  Click here for a link to repost your question in forum Windows Server 2003.

  They will be able to help your question in this forum.

  Thank you.

  Marilyn