Distribution of Code Signing and OTA

Similar Questions

• Code signing is no longer works, JAD file not produced when signed manually

  Hello!

  For some reason, Code signing all of a sudden no longer does anything when selected in the IDE.

  I used the 4.2.1 IDE

  I am now using IDE 4.6.0

  The problem started when I was with IDE 4.2.1 - just out of the blue, code signing would be does not work AT ALL.

  Using the new IDE 4.6.0 now I can manually start code signing and get a signed end COD file, but no JAD file is produced - which is essential for the facilities of the OTA.

  How to make it works again right?

  While a review once more, I found a single entry in the project properties to "always active project", selected and now it generates the JAD file and the signature tool appears correctly.  Manually, select the project as being active does not work.  Maybe it's a bug.

  BlackBerry JDE 4.6.0.12

  in any case, THANKS!   This is all to work once more!  I breathe a sigh of relief here!

• Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  XP SP3 system

  I get warnings like this when Mcafee updates.

  Process * \MCSHIELD. EXE the nest (428) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Process * \SVCHOST. EXE the nest (1632) contained code signed or corrupted and could not perform an operation with a McAfee driver.

  Is this a problem Microsoft or Mcafee?

  Do I need to fix?

  In the McAfee forums, there are several similar positions such as:

  https://community.McAfee.com/message/241542

  I'll sue your question on in their community, as they already seem to know about it.

  I would also say that, unless you are very fond of McAfee or you are forced to use it, you plan to replace it with something that has a smaller footprint, uses less resources and doesn't have these problems - something like Microsoft Security Essentials, you can get here:

  http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download

  MSE completed with the free version of MBAM and SAS should permanently keep your clean enough unless you're a daredevil like me:

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  Even if you keep McAfee, I always supplement it with MBAM and SAS since no single AV program does seem to know everything.  If your McAfee of your system is clean, I would interpret that means - McAfee found nothing, says he knows.  It is prudent to use more than a reputable scanner to get more coverage.

  If you choose to spend (and you can't have both at the same time), you must be sure to use the uninstaller that you can get from here:

  http://service.McAfee.com/FAQDocument.aspx?LC=1033&ID=TS101331

  Your system will give you better performance.

• Problem with WebInspector: error: Code signing request failed car-development-Application Mode in the East of the demo is present and is not set [false].

  Hi, I have a problem running the webinspector on my dev alpha.

  Whenever I have create bar folder with the d flag, and then run the signature tool, I got the error message:

  Error: Code signing of the petition failed because Application-Development-Mode demo
  is is present and not set [false].

  How to solve this problem? If I generate the .bar without the flag - d, can I sign and execute on the device, but without web Inspector

  I found the error

  I just had to use the indicator g in bbwp and set my password

  and not reuse bbwp and then the signing tool

• Versions of Blackberry and warnings from Code signing

  Greetings-

  I'm new to the Blackberry development, and, in fact, this is my first post after developing an app for a couple of months.  It went well, but it left me with a few general questions.  I do not know this is the right forum for these questions, then, otherwise, a pointer to the right place to ask this would be appreciated:

  1. I want to be able to customize the wallpaper.  I found a long thread on the web that gave a complicated for this technology, and I also saw the décor package which makes it a piece of cake; However it seems that décor package have not been around prior to version 4.6.  This led to the question: is there anywhere I can go to get a good idea of how the older & mature OSs are still used?  I found a Wikipedia site that gave a glimpse of all the carriers, devices on which they are based and which OS they support on these devices and there were a bunch of still be supported with OSs before 4.6.  But there is no indication of the number of people still use these.  Is there a "lot" of devices with the OSs before 4.6?  And where can I get a summary of the Blackberry range, preferably in a sort of comparative format (as a matrix of features vs model number)?

  2. in my Eclipse workspace, I have a plethora of messages like:

  The path location type Resource Description
  Discourage access: the getHeight() method of display type is not accessible due to restrictions on required library C:\Program Files\Eclipse\plugins\net.rim.eide.componentpack5.0.0_5.0.0.14\components\lib\net_rim_api.jar BackgroundManager.java SlickSwitch/src/net/infoisland/net/AC line 63 Java problem

  I asked and got my code signing keys and have signed with (apparently) success of my application.  Why I always have these warnings and how do I get rid of them (probably the answer to any of these questions will also meet each other ;-)?

  TIA,
  ANW

  (1) there are many devices on the market that supports less than 4.6 OS versions. It depends on who your audience is. Indeed, the BlackBerry Curve (4.5) is one of the best selling smartphones right now so there is a way to go before the changes.

  To change backgrounds, you must use methods of custom paint to do prior to 4.6. Try using paintBackground of IPY and drawBitmap to add a chart. Also check out the graphics API if you need more.

  (2) it depends on what version you have.

  1.1:

  Window > Preferences > BlackBerry Java Plugin > Code Signing

  Check all the signatures that apply to you (if in doubt, check all)

  For 1.0:

  BlackBerry > configure the workspace BlackBerry > BlackBerry JDE > Code Signing

  Check all the signatures that apply to you (if in doubt, check all)

• 1.1 update and Code signing

  Well, I had a time getting my upgrade to work.  The entire thread is here.  It seems that my correspondents gave a solution, so I just reinstalled everything from scratch (Eclipse 3.5 with Blackberry plugins).

  This time, when I went to import the files (window-> Preferences-> Blackberry Java Plugin-> Signature tool) code signing, I chose the directory, and he said, ' key Signature files is not found.  This is the directory with the files in it .csi, and they are there.  So, why can't you find them?  Is this another directory, it needs?

  Answered my own question: no, it looks for the .csk file, I found and import * said * TI completed successfully.  So we'll just see how the project is going...

• How to explicitly sign .cod file and jad file available in the blackberry phonegap application OTAInstall folder.

  Hi all
  I developed a blackberry software, phonegap will OTAInstall folder that contains unsigned .cod and jad files, I want to give to this folder to the client so that it can make the .cod signature of the OTAInstall folder and install it in their device.

  Note- Customer don't want .cod signature on my side and I can't share my code for the client, I can only share files .cod unsigned file OTAInstall to them.

  Thank you all

  Hi there, when you build with the SDK WebWorks, if you omit the parameter g then the application must be created without his signature.

  Once you share the unsigned cod, the customer must have their own WebWorks SDK installed, as well as of the signature code may operate the SignatureTool.jar in the folder bin to sign actually unsigned cod files and keys.

• JDE and code signing of device vs. Simulator...

  I have a test application which is just a very simple application which is a screen with a button above. I click the button and change the background color of the screen. This works very well in the Simulator. Now, I have 2 versions of this code. A version that is running on the real device and another version does not work on the physical device (although on the Simulator).

  The only difference between the applications is as follows. On the dysfunctional version, I used involved objects code signing, but then later removed this code by commenting out. After that, the app seems does not not in the unit. I did a full clean and rebuild of all, but it doesn't seem to make a difference. It's almost like the links in the application of something because of the requirement that is not removed after signing of code condition code is removed... and this is the stop of modified versions of this code to run on the device until I have reset something in the JDE code signing.

  Ideas for what something might be?

  Thank you

  -Donald

  I SOLVED IT!

  When I removed some resource files I had used when test resources (but used is no longer), the problem disappeared. I'm in a com/rim/samples directory structure... I guess the resources was my problem and nothing to do with the directory.

  On further review, resource files use a package command, so everyone the reading of this... Don't forget NOT TO CHANGE THE order of the package in your resource files too.

  Thanks for any input... I love javaloader.exe...

  -Donald

• Problem with code signing

  Hi friends,

  I am facing problems by signing my code.

  The question:

  * My cod file is 169kb.

  * When I compile, jde generates only one .cod file everything for me.

  The steps that I followed:

  * I opened the .cod in a winrar and extract the .cod files three who were inside.

  * I opened the .csl file and typed "52525400 = RIM Runtime API" to get the signature RRT (as it is a 4.5 API)

  * I registered all of the .cod files.

  * I updated using the Updatejad.exe .jad file

  Now, when I installed OTA, I get the following error.

  Error at startup BugTracker: Module «BugTracker-2 "must be signed with the RIM DURATION Code Signing Key (RRT).»

  How should I proceed? I ve run out of options. Thank you

  Check out the cod file after the signing.

• Cannot publish apps, code signing problem...

  Hello

  I received a set of three keys to RIM and I am able to enter in (Eclipse: Blackberry-> Signature request) and have all my files "signed" (it seems that there are a total of 21 signed files). However when I put it on the web for the publication, my blackberry was telling me that the code is the appropriate signature.

  What confused me most, is that the tool showed me a total of 21 cases of cod signed. I have only a single application, it should not just show me a single file instead of 21 of them. The list of files goes like this (Polyglotz is the name of my application)

  Polyglotz.cod... signed...

  Polyglotz.cod... signed...

  Polyglotz.cod... signed...

  Polyglotz - 1.cod... signed

  Polyglotz - 1.cod... signed

  Polyglotz - 1.cod... signed

  Polyglotz - 2.cod... signed

  Polyglotz - 2.cod... signed

  Polyglotz - 2.cod... signed

  Polyglotz - 3.cod... signed

  Polyglotz - 3.cod... signed

  Polyglotz - 3.cod... signed

  Polyglotz - 4.cod... signed

  Polyglotz - 4.cod... signed

  Polyglotz - 4.cod... signed

  Polyglotz - 5.cod... signed

  Polyglotz - 5.cod... signed

  Polyglotz - 5.cod... signed

  Polyglotz - 6.cod... signed

  Polyglotz - 6.cod... signed

  Polyglotz - 6.cod... signed

  The file Polyglotz - 1.cod, Polyglotz - 2.cod, Polyglotz - 3.cod, Polyglotz - 4.cod, Polyglotz - 5.cod and Polyglotz - 6.cod are all located under different directory EvsJXuSa\

  In any case, I copied all the files to my Web site, set the configuration of mime types in the file .htaccess as suggested by RIM to

  http://www.polyglotz.com/index.php?option=com_content&task=view&id=79&Itemid=40

  but whenever I tried to download and install the application using the web browser on the device, I kept getting the message saying that the application is not signed correctly.

  I'd appreciate very much any help that you could give me.

  Kind regards

  If you want to distribute your app via OTA and if your application also contains brother cod files the following:

  Rename your cod for zip file. Unzip it. Delete the generated file.

  And extacted *.cod file with your jad file (you don't need to edit the jad file) to the server.

  Visit this link for more technical information:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800708/800646/What_Is...

• Code sign VISA raw driver USB for Windows 8

  Hi guys,.

  I wrote a LabVIEW program that communicates with a measuring using NI-VISA (class raw USB) USB device.
  With the development of Driver NI-VISA Wizard, I created two .inf files of drivers (for XP/2000 and 7/Vista).
  It works like a charm on my computer (Windows 7, 64-bit) and on the computers running Windows XP and 32-bit versions of Windows Vista and 7.
  I also have to work on 64 bit versions of Windows Vista and 7 using "disable driver signature enforcement" before installing the driver.
  Once the driver is installed, it is listed under "devices USB of NI-VISA" in the Windows Device Manager. After that I can reactivate the driver signature enforcement, the unit will continue to work, even after a reboot.

  Alas, in the 64-bit version of Windows 8 is not as simple as that. Yes, you can temporarily disable driver signing enforcement, but not on computers that use 'secure boot' or UEFI.
  I know that there are ways to disable booting UEFI's secure, but I don't want that on our customers computers. It seems wrong, and could introduce a large number of security problems.

  The next logical step would be to sign the device driver. Our company has a valid kernel mode code signing certificate and we signed the other drivers with it in the past.
  The problem is that I don't know how to sign my device in the NI-VISA database driver. According to the .inf file it uses WinUSB.sys, a Microsoft USB generic driver (part of the Windows Driver Kit, I think).
  Winusb.sys is already signed by Microsoft and that I could replace the signature, but that probably won't work without some tweaking inf and generate a new catalog file.

  Can someone please give me some pointers on where to start? As a reference, I have attached one of the inf files for this post. This inf file works on Windows Vista and 7.

  It is even possible to create a signed driver based on NI-VISA raw?

  Thanks in advance for your help.

  Paul

  Here's a knockout who described workaround.

  http://digital.NI.com/public.nsf/allkb/36DB8D6AC385052786257A940066A421

  What you have written, you need to generate a catalog (.cat) of the inf file (as described in step 1 of the KB) and then sign the .cat with your certificate file, the same way you would sign your other components. The inf and CAT are always distributed together. The inf file contains information about the cat file that has the signature, and the cat file contains the signature information. Since you have already been distributing the components signed with your own certificate, I'm sure you can understand the process, but please let us know if you have any other questions.

  Thank you

  Pankaj

• two locks of laptop see the light as lock sign1 and lock signed and fully offshore

  Hello

  I have HP 6730 laptop computer b today, when I start it show me

  two locks light as ld (lock sign1) and (lock signed) and turns it off completely

  lock sign1 means a pic of lock with number 1

  average of locking signed a lock with a text pic

  It's not start all these two locks photo blick 2 times, then turns off completely another conduit of speakers and! and illustrated also box.

  No display at all.

  Please help what is this error?

  Thank you

  Those are the LEDs for shift caps lock and number lock. The fact that your computer does not come on and the lights flash means that the laptop trying to communicate an error code. See LED display empty Error Codes for more information.

• Lost the ability to create tokens of debugging: error: Code signing request has failed because the value debug token of Type Package is not allowed.

  I have been a token of debugging and apps on my device Z10 hundreds of times from the command line and Momentics but this time I am confused.

  I am trying to create a token of debugging (in command line and Momentics) and deploy it in my Z10 camera, but it does not work.   In both cases, I get the following error.

  "Error: Code signing request has failed because the value debug token of Type Package is not allowed."

  2 things have happened recently that make this potentially different situation.

  a.) now my device is currently running OS 10.2

  (b) there was something new regarding signing apps with your blackberry ID?

  I was a little out of the loop for 1-2 months so please forgive me if this problem is very obvious... I am looking for a clue to what I'm doing wrong.

  This has been fixed on both of your accounts.  It was a problem of account setup.  We're looking at what caused it to prevent it from happening in the future.

• Unable to connect BAR file "error: Code signing request failed because it cannot be recorded.»

  Hello

  I'm trying to sign the BAR file generated from the apk files, but I got this error:

  Error: Code signing request has failed because it cannot be recorded. Package-Version-Id [gYACgLU-GLg8YtNMuWU17-BoxsM], [gYAEgM4XsG9ppojbj3zOO9gg-Nc], Id [2189468] Client Application-Version-Id.

  I tried to redownlowd the file CSK again and again, did a lot of things but not luck.

  Thank you for sending via manifest file.  The error is caused by the name of the application you are using.  There is a limitation of the number of characters that can be used for an application name.  The number of characters will vary according to the type of encoding used, in this case it would be 7.

  The workaround for this solution, use our tool is to define an application name by default using Latin based on characters and then add names localized for each supported language.  These localized names do not have this limit.  For comparison, here's how it's done using BlackBerry Momentics: How to define an Application as the characters name Unicode requires the default name would only be used if a localized name is not available for the language of the user.

  Android also supports localized names of applications, so the similar process should work there too.

• Code Signing - different version of the JDE

  I'm back-porting an application 4.2 to 4.0. I copied the files sigtool directory 'bin' JDE 4.2 in the 'bin' JDE 4.0 directory. However, when I try to sign the COD files, the operation fails. The 'detail' says:

  "The signature on the request of code signing did not check.  The probable cause of this problem is entered an incorrect password. »

  The password is correct and checked several times. There is another reason for this failure? Am I missing a step when you move files sigtool 4.2 back to 4.0?

  The original JDE (the application was developed on) is 4.2.1. One where I am signing is 4.0.2.

  This link explains the changes in version 4.3.0.  It is the only version of the Pack BlackBerry JDE/component where the format of these files has changed.

  What's – the Signature key format changes in BlackBerry JDE 4.3.0
  Article number: DB-00639

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800738/800989/What_Is...