Ditto for other issues.

Similar Questions

• Error 1079: The account specified for this service is different from the account specified for other services running in the same process. When you attempt to start the Secure Socket Tunneling Protocol

  I try to use my verizon air card, a PC770; VZ Access Manager version 7.2.7.1 recognizes the card very well, but whenever I try to "connect WWAN" I get the following message - "failed to connect - connection not available." Through the verizon forums, I trace this error to the 'Remote Access Connection eating' service that is not started. I try to start this service and receive error 1068: the dependency service or group could start. I have check the Dependencies tab and see Secure Socket Tunneling Protocol. When I go to this service, I see that it is not started, try to start this service result in error in my, title = error 1079.

  I saw many others issues related to the error code 1079, but nothing that she wears on the SSTP service.

  How can I fix it or what additional information is required to help diagnose?  Regards, Paul

  Bud13:
  Dude... May want to lay off the crack for a while before this extreme paranoia Gets the best of you...

  To the OP:

  Just go to the properties of the service you are trying to start, then select "this account".  Browse your computer and find the "Local Service" account  Clear the password so that it is empty and apply.  You will get a dialog box indicating that the account has been given to the connection as a good service.  Then start your service.  This should solve your problem.  I have seen this question many times and there are many, many reasons why it could have happened, but there is nothing to worry.

• "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

  Original title: the account specified for this service is different from the account specified for other services running in the same process

  while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

  1. have there been recent changes to the computer before the show?

  2. the problem occurs in safe mode with networking?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Additional information:

  The problems of Internet connection:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Please follow these recommended steps and post if you still experience the problem.

• Windows 7 is constantly looking for other networks and drop connection

  Original title: the upgrade of Windows 7 for XP

  I first installed this OS a year ago to this date. Loved, absolutley was entrenched with how easy it was and just how 'worked '. I am a software developer myself and am happy to report all my IDEs, the server settings, etc. all worked like a charm. I had a little problem with VPN but it works with the Vista one (with some work) so I can't complain.

  My problem and this is why I uninstalled windows 7 and will be EVER is back at it before it is solved the same problem 10 years ago. He keeps every 60 seconds looking for other networks or drop the connection no reason apparent. With windows XP, I could disable the Zero wireless and everything would be fine. However, with windows 7 if I turn the WLAN service nothing on this earth that will allow me to connect to it without a third-party application.

  In the end I used a 3rd party app made by the chipset driver and it still failed (but had limited success).

  It is a known problem with windows operating systems. This just "does not work" at all. It's a pain in the thigh and is the reason why people are saying that the wireless is terrible for gaming. I know that isn't true since I have never had a fall with windows XP or my dual boot SuSe OS. 3rd parties even tried to fix this for microsoft in creating the WLAN and Vista Antilag optimizer which all fail for windows 7.

  And just to show you how apparent is this bug...

  customer complaints

  It seems to somehow keep seeps through the cracks with every version of windows. Simply because I know that this wont never be resolved after 10 years ive thrown my copy in the trash and advising all my loved ones to stay on XP. I used to think... "they'll fix" but quite honestly, I think that microsoft is tone deaf to it.

  With regard to upgrading my firmware on my router is concerned, I have programmed my own. I used 3 different routers. My drivers are all up to this date for my card wireless on this box. I used XP drivers with slightly better results but remains unacceptable. I was running with a hackintosh and vmware fusion rather than deal with these headaches after work.

  Maybe im being a bit too critical, but make you pay back for a BONE which does not have everything because of XP.

  After buying a WNDR3700 N600 top double band brand new brand of the router Netgear power line she didn't always.

  2 solid ways fixed my issue.

  the network of windows 7 reason fails

  One, I had to turn off the service navigation computer in administrative services as noted above.

  Two, I had to turn off the power save feature on the usb network adapters.

  Not many people understand how to solve this problem, but I would ditch the derivative of the net bios completely.

• This is where other issues of quality and quality Plans are grown?

  This is where other issues of quality and quality Plans are grown?

  Ben

  As the quality is part of discrete manufacturing module that seems logical, but you might also find some useful discussion for the purchase or manufacturing process.

  JS.

• I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  I liked the old version of iTunes that allowed me to delete songs from my camera if I needed to make room for other things. Does anyone know why it was changed?

  You have to ask Apple why the design has changed. You should still be able to delete songs by changing your selection of synchronization and synchronize.

  Or you can delete songs directly on your iPad and other iOS devices, directly in the music app or via settings > general > storage & use iCloud > storage management > music

• stop looking for other bluetooth devices

  I'm having a lot of problems with my Oticon Bluetooth Streamer and iOS 9.3 x

  The BT connection is down about 60 seconds in a conversation, in other words, the phone connection is still active, but Bluetooth has fallen. When I go back to settings > Bluetooth it shows that it is not connected and I have to type to reconnect. I use this Bluetooth Oticon workflow with my hearing aids and all versions of iOS 4-5 years until this "update" for iOS 9.

  When I go on the Bluetooth setting on the iPhone, I see that he is still looking for other devices and I wonder if there is a way to stop this behavior because it can be interrupted the existing connection from BT. I'm just trying to solve the problems because I am dependent on this device in order to be able to use the phone. I have a profound hearing loss, and it's the only thing that works for me. Oticon is, of course, blame Apple, but who knows and I don't like who is at fault, I just need to fix it.

  Please do not suggest that I get another device or something else that a fix suggested on this specific point. I have an iPhone 6 s passing.

  No, you can not stop from looking for other devices, but this isn't your problem, anyway.

  Try the settings > general > reset > reset network settings and pair them up again. A second possibility is that something could interfere.

• I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues.

  I worked on a large document for several years and all of a sudden I can't scroll to the bottom of the screen with my two fingers on the touchpad, well that I have no problem scrolling to the bottom of this page to search for similar issues. I can navigate only to go up and down with the arrow keys.

  What version of Pages is running on your MBP?

  What version of Mac OS X is running on your MBP?

  The MBP is not iOS running.

• Applications such as Firefox and Pandora, do not recognize that I have updated to v 9.0.1 of Firefox, even though that I have updated to him twice. What can I do for other applications to recognize that I use Firefox 9.0.1?

  I've updated to Firefox 9.0.1 twice. I still get messages from Firefox and Mozilla among others asking me to upgrade to the latest version of Firefox so that my system works. When I do help > about Firefox, it shows that I'm using version 9.0.1. What additional steps are needed for other applications, including Firefox, to recognize that I am using 9.0.1 version?
  Thank you.
  Rory

  Your user agent is corrupted by the Fast Browser Search (FBSMTWB) that identifies you as Firefox/3.5.7

  see your user agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.1.7) Gecko/20091221 Firefox/3.5.7 FBSMTWB

  reset the user as mha007 above answer agent

  See also these pages and discussions on Fast Browser Search (FBSMTWB in the user agent).

  http://help.fastbrowsersearch.com/

  http://www.pccybertek.com/2009/05/remove-fast-browser-search

  Thank you

• Diagnosis of the accident saying IOS 9.2 and iPhone6 when I'm not under 9.2, or using a 6 my question is in short I'm bugged? I'm sure I'm for other reasons, the phone watching me as these accidents happen? I'm on a 5s

  Diagnosis of the accident saying IOS 9.2 and iPhone6 also in descriptions of lately, I'm not under 9.2 or using an iPhone 6 my question is in short I'm bugged? I'm sure I'm for other reasons, the phone watching me as these accidents happen?

  also, I am ware as a result of an update removes spyware.

  Thanks for the info on remote monitoring would be of use to me, indicator of proximity is clearly red on and off the power for minutes at random, yes hot phone, noises, yes 100%, I think just I see their device?

• encrypted flash drive. How to unlock it for other computers?

  Encrypted flash drive. How to unlock it for other computers?

  Following the decryption process before using it on other computers. Since you don't mention how it was encrypted we can give any advice home other than to follow the instructions of any process of encryption allowing you to decipher.

• Error 1079: "the account specified for this service is different from the account specified for other services in the Sun in the same process.

  Hello Sir

  customers start the dhcp service, I get an account of 1079 ACE ' the error specified for this service is different from the account specified for other services in the Sun in the same process.

  
  

  Go to start / all programs / accessories / Run.  Type netsh winsock reset catalog , and enter.  You may need to restart.  See if that fixes the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service. Ditto for "file sharing." How can I activate them?

  In trying to "turn on network discovery", I got this message: "the specified service does not exist as an installed service.  Ditto for "file sharing."  How can I activate them?

  Hello

  Method 1: Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Is it possible for other people to see my ID is. related to Windows Live?

  Hello

  Is it possible for other people to see my linked ID? So if I have a link * address email is removed from the privacy * and * address email is removed from the privacy *, anyone can see that the two pieces of identification are related? Thank you!
  original title: Hotmail linked ID?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Some programs will not work for me as an administrator, but will work for other users on the same computer.

  Original title: some programs will not work for me as an administrator, but will work for other users on the same computer. I did a system restore as well as uninstalling and reinstalling programs that do not work without result.

  Did you run the System File Checker?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try Safe Mode (you have this problem in Mode safe?).

  315222 - a Description of the Options in Windows XP (or Vista) Safe Mode boot
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315222&FR=1&PA=1&SD=HSCH

  If you cannot reproduce the errors in Mode safe see if you can further isolate the cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

  Create another user and see if they have the same problem as your current user.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  811151 - how to copy user data to a new user profile
  http://support.Microsoft.com/?kbid=811151

  Description of Windows Easy Transfer for Windows Vista
  http://support.Microsoft.com/kb/928635

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo