Division into columns in new items
How can I have 1 column (width text full page) in one section and then a 2-column in another section? As soon as I add 2 columns to my document, the whole document goes to 2 columns. I want to be able to have the 1 column in the first section and 2 columns in another. Is this possible? I disabled the 'match previous section' in the document formatting, but I can't make it work. Any ideas?
In the end, you will have three sections:
- Columns 1
- Columns 2
- Columns 1
The following was actually v5.6.1 Pages on El Capitan 10.11.2. It seems that three sections in the image to the right. In the view menu Pages, see page layout, show invisible characters and display thumbnails page.
Add the text you want on the first section of the document. After the last sentence, press return. Now, the Insert menu: Section break. Click in your second miniature of the section and add the text that will become your content in two columns. Select the specific text. In the Format Panel: Layout tab, set the number of columns on 2. Only the second topic content should change to 2 columns. Find that last sentence in this 2 columns content, press return and then insert menu: Section break.
Click on the miniature third section, enter and then select all the content of this section, then in the Panel Format: page-layout tab, set the number of columns to 1. Spill selected, 2 columns above in section three will reset to regular content here, without affecting the layout of 2 columns in the second section.
None of the sections have their previous section game unchecked in the Documents: Committee of the Section.
Tags: iWork
Similar Questions
-
Before the last update and on FF is first opened, there was a BBC News Items labeled tab just below the address bar. Clicking on this tab opens a long column of news. By clicking on one of them opened a web page describing this item. After the last update (38.0.5) this tab is gone. How can I get that back?
Hi, was it a bookmark in the bookmarks may bar? If missing the bookmarks bar, right-click in the bar of tabs - but not on a tab and tick/check bookmarks toolbar.
It may also be a lack of subscribe (RSS) button - see orders customize Firefox, buttons, and toolbars.
If your question is resolved by this or another answer, please take a minute to let us know. Thank you.
-
Dragging files in a new item, separate tracks
Hello everyone.
I have a video and 4 Audio Clips, if I select all the and drag them into the new item, stay audio in a track. What I like to do is: I want to be able to drag all of the files in new element, so all the Audio is still in separate Tracks.for if I have 10 Audio files I want to have 10 Audio tracks rather than each of them next to each other. I can create new tracks and drag and drop each Audio file in manually separate titles. But I wonder if there is a shortcut for this
Thank you very much
Hi Animationlife,
Sorry, but that isn't possible, you can probably go ahead and place a demand for it.
Thank you
Ilyes Singh
-
Hello
I would like to turn rows into columns and need your help
I have
Control Panel
where we have two columns
OrderID, orderdate
I have order_codesorderid order_date 1234 9/10/2009 4555 10/1/2009
have 3 columns
OrderID
/ / DESC
value
data to order _codes
noworderid desc value 1234 ch_code1 5789 1234 ch_date 10/20/2009 1234 ch_miscval 678.9 1234 ch_charge 765 4555 ch_code1 9999 4555 ch_date 10/0/2009 4555 ch_miscval 78.9
I need to transform the data like this
any help is appreciatedorderid == ch_code1 ==ch_date == ch_miscval == ch_charge == order_date 1234 == 5789 == 10/20/200 == 678.9 == 765 == 9/10/2009 4555 == 9999 == 10/1/2009 == 78.9 == --- == 10/1/2009
Thank you
Published by: vg November 2, 2010 09:47Try this. Hope this helps
/* Formatted on 2010/11/02 13:29 (Formatter Plus v4.8.8) */ WITH order_desc AS (SELECT 1234 orderid, 'ch_code1' descp, '5789' VALUE FROM DUAL UNION ALL SELECT 1234, 'ch_date', '10/20/2009' FROM DUAL UNION ALL SELECT 1234, 'ch_miscval', '678.9' FROM DUAL UNION ALL SELECT 1234, 'ch_charge', '765' FROM DUAL UNION ALL SELECT 4555, 'ch_code1', '9999' FROM DUAL UNION ALL SELECT 4555, 'ch_date', '10/0/2009' FROM DUAL UNION ALL SELECT 4555, 'ch_miscval', '78.9' FROM DUAL), order_t AS (SELECT 1234 orderid, SYSDATE order_date FROM DUAL UNION ALL SELECT 4555, SYSDATE FROM DUAL) SELECT a.orderid, MAX (DECODE (descp, 'ch_code1', VALUE, NULL)) ch_code1, MAX (DECODE (descp, 'ch_date', VALUE, NULL)) ch_date, MAX (DECODE (descp, 'ch_miscval', VALUE, NULL)) ch_miscval, MAX (DECODE (descp, 'ch_charge', VALUE, NULL)) ch_charge, MAX (DECODE (descp, 'order_date', VALUE, NULL)) order_date FROM order_desc a, order_t b WHERE a.orderid = b.orderid GROUP BY a.orderid
Output ORDERID CH_CODE1 CH_DATE CH_MISCVAL CH_CHARGE ORDER_DATE ---------- ---------- ---------- ---------- ---------- ---------- 1234 5789 10/20/2009 678.9 765 4555 9999 10/0/2009 78.9
Published by: new learning on November 2, 2010 10:30
-
cannot find Visatask in 'Add new item in VS2008' using studio measure 8.6
I installed VS2008, VISA and Measurement Studio 8.6 (with visa.net library). When I run a new application in vs2008, I can't chose to don't ask world but the only visa application.
I can't find job Visa when I go to add a new item in vs2008.
Please help I really need this job.
Thank you
I did the job! I uninstalled all software OR, then reinstalled with Feb.09 and it device drivers CD market. I thought that I should post the solution... This might help others.
-
How to refresh the Listview after adding a new item
Hello
I have the following list:
ListView { id: channelsList dataModel: categoryModel listItemComponents: [ ListItemComponent { type: "item" StandardListItem { title: ListItemData.name // Channel name imageSource: ListItemData.imageFile status: ListItemData.id id: channelItemId contextActions: [ ActionSet { //title: contentView.title ActionItem { title: "Add to Favorites" onTriggered: { console.log(ListItemData.id + " will be added to the Favorites"); //categoryModel.addFavorite(ListItemData.name, ListItemData.imageFile, ListItemData.id); channelItemId.ListItem.view.viewTriggered(ListItemData.name, ListItemData.imageFile, ListItemData.id); } } } ] } } ] onTriggered: { var chosenChannel = dataModel.data(indexPath); console.log("indexPath: " + indexPath); var playingPage = playpagedef.createObject(); playingPage.chname = chosenChannel.name; playingPage.cid = chosenChannel.id; playingPage.init(); Qt.nav.push(playingPage); } attachedObjects: [ // The bucket categoryModel is a non visible object so it is set up as an attached object. // The categoryModel itself is a QListDataModel defined in categorymodel.h and registered // as a type in the creation of the application. CategoryModel { id: categoryModel // The path to the JSON file with initial data, this file will be moved to // the data folder on the first launch of the application (in order to // be able to get write access). jsonAssetPath: "models/channels.json" // The filtering is initially set to "Category 1" to show category channels filter: label.text }, ComponentDefinition { id: playpagedef source: "PlayingPage.qml" } ] function viewTriggered(name, imageFile, id) { categoryModel.addFavorite(name, imageFile, id); categoryModel.clear(); } }
and the categoeymodel.h is as follows:
#ifndef _CATEGORYMODEL_H #define _CATEGORYMODEL_H #include
#include #include #include using namespace bb::data; // The category categoryModel is based on the QListDataModel template, which in turn // implements the abstract DataModel class. typedef bb::cascades::QListDataModel CategoryListModel; /* CategoryModel Description: * * CategoryModel class for the Category List application, the data categoryModel * reads and write from a JSON file that keeps all item data * for the list. */ class CategoryModel: public CategoryListModel { Q_OBJECT Q_PROPERTY(QString filter READ filter WRITE setFilter NOTIFY filterChanged) Q_PROPERTY(QString jsonAssetPath READ jsonAssetPath WRITE setJsonAssetPath NOTIFY jsonAssetPathChanged) public: /** * Constructor that sets up the recipe * @param parent The parent Container, if not specified, 0 is used */ CategoryModel(QObject *parent = 0); ~CategoryModel(); QString filter(); void setFilter(const QString filter); QString jsonAssetPath(); void setJsonAssetPath(const QString jsonAssetPath); signals: void filterChanged(QString filter); void jsonAssetPathChanged(QString jsonAssetPath); public slots: void addFavorite(QString channelName, QString channelImageFile, int channelId); private: bool jsonToDataFolder(); // Property variables QString mFilter; QString mJsonAssetsPath; QString mJsonDataPath; // A list containing all data read from the JSON file QVariantList mData; //Invocation variables bb::cascades::Invocation* mInvocation; }; #endif // ifndef _CATEGORYMODEL_H My problem is that the listview is not get automatically updated when a new item is added to the datamodel (a favorite channel is added). I have to exit the application and restart to see the updated list.
categoryModel.addFavorite(name, imageFile, id); categoryModel.clear();
categoryModel.clear ();
does not work. I get:
Asset: / / / hand. QML:180: TypeError: result of expression 'categoryModel.clear' [undefined] is not a function.
I would like to know how to achieve using approach "more correct".
QListDataModel does not expose its internal storage directly. It is possible to reconstruct the map by performing an iteration in a loop (with the help of data() and size() methods), the dataModel entries:
http://developer.BlackBerry.com/Cascades/reference/bb__cascades__qlistdatamodel.html
but I don't see how this could help. If the filtered data is changed, it must be merged with the original sort data.
Why the original approach has not worked?
I could not understand from the description appearance of the interface user, please post a screenshot if possible.
-
Remove the Division into chapters to DVD convert
I converted a VHS to a DVD but Windows divided into chapters so it plays correctly with a DVD player. How can I get rid of the Division into chapters? It is about 2 hours long and only plays a few seconds on the first, then jumps to the last few minutes! I can only read on a computer by moving from chapter to chapter.
I converted a VHS to a DVD but Windows divided into chapters so it plays correctly with a DVD player. How can I get rid of the Division into chapters? It is about 2 hours long and only plays a few seconds on the first, then jumps to the last few minutes! I can only read on a computer by moving from chapter to chapter.
==================================================
How did transfer the video from the VHS to the DVD tape?Did you burn the DVD with Windows DVD Maker?
You have a single video file saved on your hard drive that is
the band complete? If_Yes_what is the format (Extension) of the
video file? -
Pivot lines not converted into columns?
Hello
I did pivot amount lines successfully.
But the lines not converted into columns while I'm working on the lines of pivot columns.
Please help me.
Thanks in advance,
A.Kavya
Hello
Take a look at this link:
-
Try installing Adobe Acrobat Version 7.0 on a new PC running Windows 7. Get the error message-
"Attention 20225. Adobe Acrobat7.0 failed to create a new item. Adobe PDF Port / printer. The Adobe PDF printer may be unavailable."
any help appreciated
On behalf of Adobe, no version of Acrobat before 8.1 is completely installable or useable on any version of Windows beyond Windows XP. There are fundamental differences in the way that the Adobe PDF printer is installed and accessible on later (1) Windows Vista and/or (2) 64 - bit versions of Windows. In addition, Acrobat 7 coordinates with all recent versions of all Microsoft Office applications. You need Acrobat DC licenses at this stage.
-Dov
-
InDesign - how to re-enable the button "create a new item of the Index.
When I was creating topics for my index finger, I saved the document after doing a subject - (because I had created topics yesterday and is not saved and lost all of my work) - when I tried to create a new item of the Index, the button wasn't dark - not active, so I was not able to add more topics to my Index. I rebooted my MacBook Pro (Mac OS X Version 10.6.8) and reopened my InDesign (Version 3.0.1) document and the palette Index box still lacks a button "Create a new item of the Index" assets to allow the action. I do not know how to do this - does anyone have any suggestions?
I worked on the range of the Index of reference - adding items to the Index with a subject that I had already entered and when I went back to fashion topic, I noticed that the 'Create a new item of the Index' button is enabled - so I think everything is good now. Thanks for the forum.
-
Add new items to toolbar in 2015 FM
Hi all, would you please let me know how I can add new items in toolbar of direction as (N-to-Persian or Farsi-to-N) and etc within the 2015 FM.
You can find the toolbars in $fmhome\fminit\WorkSpaces\
You can find the direction toolbar for example unstructured FrameMaker in the WYSIWYG here view:
$fmhome\fminit\WorkSpaces\UnStructured\WYSIWYGView\toolbars\direction.xml
However, this file may be replaced by a specific user:
C:\Users\
\AppData\Roaming\Adobe\FrameMaker\13\WorkSpaces\Structured\WYSIWYGView\toolbars\direction.xml It is best to change the user one.
Looks like this:
You can customize this toolbar (by editing the direction.xml file and other files direction.xml for the other display modes). However, as far as I can see there are a NumberUtilityITN/NTI, but not NumberUtilityFTN/NTF. In other words, while there is a function to convert N to the Slovak numbers and back, are there no such a function for N Farsi and back (yet).
-
New items 14 converted 13 items and renamed catalogue catalogue 13 items. Now, I can't get either (1900 photos) how to recover?
bobreie wrote:
New items 14 converted 13 items and renamed catalogue catalogue 13 items. Now, I can't get either (1900 photos) how to recover?
What happens if you try to open the catalog to 14 items? You get a message? You can always start the Organizer while keeping the SHIFT key and choosint of "repair" or use a new catalog.
If you open the former organizer of 13 elements, the catalog should open fine, even if it has been renamed.
-
I bought 3 years new DAP/New Item SPP on February 21, 2015. We don't do not start and strive it now and he arrived at expiration. Please send me an another instructions to get started.
Thank you
Rocky
Can I call the support of aid?
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html -
With my script ESTK, users select the model numbers in the list and then the script inserts an element with a model number is entered in an attribute, an element for each selected model.
When you add a large number of elements, each element of extra brother takes a little more then the previous item adds. Adding 250 items may take longer than 3-1/2 minutes or more. During the addition of 20, 50 or 75 items happens quickly, without any noticeable length. It is somewhere in the top 110, this is where that starts to get noticed.
I even used $.hiresTimer and writes the value to the console for each time a model has been added. Because the timer is reset to zero (0) whenever it is called, it was easier to notice than the amount that it incremented from one element to the other got progressively bigger.
Any ideas as to why it takes so long or reflections on what I could do to speed it up?
The structure looks like this:
< PartModels >
Text < NoteText > < / NoteText >
< model ModelNumber = "ABC01" / >
< model ModelNumber = "ABC02" / >
< model ModelNumber = "DEF03" / >
< model ModelNumber = "DEF04" / >
…
…
< model ModelNumber = 'XYZ01-A' / >
< model ModelNumber = "XYZ * B" / >
< model ModelNumber = "XYZ500" / >
< / PartModels >The script is quite simple: scroll a selected model numbers table, add a new item for each model number and value of the attribute, the value of the model number. It's the short version:
Function InsertModelElements (modelsToIns, insElemLoc, GVdoc) {}
var newEleId;
var newElemLoc = insElemLoc;
var elemDef is GVdoc.GetNamedElementDef ("Model");.
for (var i = 0; i < modelsToIns.length; i ++) { / / modelsToIns is the selected model range }
newEleId = elemDef.NewElementInHierarchy (newElemLoc); //ElementLoc based on NoteText first, last, or absent
SetAttribute (newEleId, "ModelNumber", null, modelsToIns [i]); //More feature robust to set the attribute
/ * Which also works for the layout attribute * /.
var vattributes = newEleId.GetAttributes ();
vattributes values [0] [0] = modelsToIns [i];
newEleId.Attributes = vattributes;
/ * At one point, I tried to use a new location of the item to the last inserted element, no change * /.
var newElemRange = setElementSelection (GV_doc, EleId); function that returns the range
newElemLoc = newNewElemRange.end;
}
}
Any help is appreciated.
Sincerely,
Trent
Thanks Russ,
I seriously considered trying to copy/paste and started to change the code to do it. But I could not let pass, the answer should be right there in front of me, it's all too long that I worked with this stuff, I am not able to see. Then it dawned on me what's happening.
In a previous test, I put a timer on each action that is closed. For example, I start with a container element that has 200 children of elements, each with a specific/unique model number attribute. All the 200 existing items are deleted and then replaced with 250 new items with a different value for the attribute of model number. The timer was placed after the Element.Delete () and ElementDef.NewElementInHierarchy () methods. What I've noticed with the timer, it's that each deleted item has been removed as fast as the previous item (so it took progressively less and less time to remove an item). And of course the opposite was noted for insert items, each inserted item has taken longer than the previous inserted item.
These elements can be inserted in two areas of the structure, one of the neighborhoods within format rules that affect the formatting and is actually a bit faster. This led me to the cause being ESD format rules. The area that takes more time has quite a few rules of extensible format that apply. Whenever an element is inserted or deleted, FrameMaker through these rules for formatting the content of elements. Given that the rules apply to the parent, first, last, next, previous, etc., FrameMaker must apply the rules of the format to all elements of the structure that the rules (which are extremely complex due to various elements, attribute values, and combinations that can be inserted).
Removal or thinning of the FormatRules in ESD, she becomes faster. But each of the FormatRules are needed. So using app. ApplyFormatRules = false; just before that the elements are deleted and inserted works very well. But the key is to implement ApplyFormatRules return to true before remove the last element should be removed and before inserting the last element to be inserted, so it allows to scroll all the rules of format of ESD for all elements in the hierarchy of these format rules apply to. ApplyFormatRules true and assign the ElementDef until the last item works also [EleId.ElementDef = GV_doc. GetNamedElementDef (insElemType);], but only before all the other functions are performed or different items are added.
doc. Reformat() will not reformat the content correctly after the fact, because the element has been created without the format rules, so it reformats all the contents of the elements without the format rules.
The FDK version which was created 10 years ago had the same problem of slow operation when a large number of items have been inserted, but was still an improvement over having manually insert each item, and then type the value of the attribute, if she had lived with.
He now works surprisingly fast. I hope that my explanation of what I think is happening, including the cause/solution, is understandable.
Sincerely,
Trent Schwartz
-
How to split a string into columns
Hi all
Have a strings like this, where the delimiter is
Thanks in advance10:00 | x1 | 2 | RO | P | Con ausilio | y1 10:10 | x2 | 1 | RO | | | y2 10:20 |x3 | 3 | | | | y3 10:30 |x4 | 3 | RO | N | Con aiuto | y4 10:40 |x5 | 1 | RO | | | y5 how can I break it up into columns, for example, the first char(before first pipe) insert in first variable, then, after first pipe, second characters in a other column ans so on col1 := '10:00'; col2 := 'x1'; col3 := '2'; col4:= 'RO'; col5 := 'P'; col6 := ' Con ausilio '; col7 := 'y1'; col1 := '10:10'; col2 := 'x2'; .. and so on
Hello
If you want to split the string str into 7 columns :
SELECT TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 1)) AS col1 , TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 2)) AS col2 , TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 3)) AS col3 ... , TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 7)) AS col7 FROM table_x ;
If you want to split it inot 7 variables :
col1 := TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 1)); col2 := TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 2)); col3 := TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 3)); ... col7 := TRIM (BOTH FROM REGEXP_SUBSTR (str, '[^|]+', 1, 7));
Maybe you are looking for
-
just updated to 13.0 Firefox on my mac last night (without plugins in order to not blame them!) ... the man his SLOW SLOW SLOW. Slow loading pages, slow to load and slow to open java (even more then before!) I have an i5 CPU and 8 GB of ram 1333 Mhz
-
NB100 - how to turn on the fan inside?
Hello I installed Windows 7 and downloaded VAP, it works very well.My question is: How do I activate the fan inside? because it was replaced with (Fn + F8) "balanced and power saver" after the installation of VAP. need help that I can feel the warmth
-
No download itunes can have 10 window... No. Apple Aplication
Hi I have a new computer Alienware window 10... and I can not download iTunes... He ask again me for Apple Application or administrator... I use Google Chrome and at this point, I don't know what to do PLEASE HELP THANKS BILL
-
Hello I use a module NI9862 with a CRIO9081 to retrieve data CAN from another device. I have properly the power module and configure the software with all drivers. My problem is that when I start the "BUS data viewer" under MAX, there is no data. But
-
Speakers worked very well and have now stopped working
Original title - so my speakers do not work and I need help fixing it. Anyone know how to fix the speakers? I have problems with my speakers. I use my old laptop sisters and the speakers were working well and then they stopped working so my question