dlld:\source\spwizeng.dll is not a valid image

Similar Questions

• Error loading Windows 7 on Windows XP. Unattend.dll is not a valid image.

  Try to install Windows 7 on my Windows XP Home Edition and it comes up with this window... "The application or DLL i:\sources\UNATTEND. DLL is not a valid image. Please check this against your installation diskette. »

  This msg comes after clicking on my computer, then on the CD-Rom with windows 7. Then the window with the above message appears. After clicking on the "ok" button, a new window opens called Windows Installer and the msg said: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0xC1].

  How should I proceed?

  Karen

  You can not install Windows 7 from while running XP. Boot from the DVD of Windows 7 and "Press any key" when prompted.  If you follow these instructions already your DVD can be zero, fingerprint or defective. Download and cremnant a new DVD according to the instructions below.

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• RASDLG.dll is not a valid image

  I get this when I boot.  "the application or DLL c:\windows\system32\RASDLG.dll is not a valid image.  Please check against your installation diskette. "   Some functions are now missing.  I can do almost all the important data.   How can I fix it?

  Hello Grif3, welcome.

  I recommend to download a new copy of the DLL here and then manually placing them in the C:\Windows\System32 directory. Try this:

  1 turn off your computer completely
  2. turn on the system and start immediately by pressing the "F8" key until you reach a multiboot menu
  3. Select "Safe Mode with network" in the list
  4. wait until it boots into Windows. This may take a few minutes

  ---
  After that, it starts in Windows
  ---

  1. download RASDLG.dll here:
  http://www.dlldump.com/download-DLL-files_new.php/DllFiles/R/rasdlg.dll/5.1.2600.2180/download.html

  2. save the file and then copy it into C:\Windows\System32
  3. click on START
  4. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.
  5. type regsvr32 rasdlg.dll and press enter
  6. restart your computer

  Let us know what happens

  Thank you!

• error windows\system32\advpack.dll is not a valid image

  I try to install Life Cam VX-5000. I get an error image DXSETup.exe - bad... It is said THAT DLL C:\WINDOWS\system32\advpack.dll is not a valid windows image. Please check against your installation diskette. I'm not a programmer or anything, just an ordinary girl looking for help. Can someone walk me through what to do to solve this problem in simple terms? Thank you!

  System Machanic 6 has detected that a file Advpack.dll was spyware on his deep optimization of Start Up procedure. However, Windows replaced after its deletion and I ran SM6 Pro again. This time he ignored the file.

  CONCLUSION: There are maybe a program that replaces the Advpack.dll real with a fake spyware Trojan. Perhaps in one of the free SP2 packs on the internet or another program. Here again, it may be a fault with Spyware detectors.

  As long as the file is replaced by Windows automatically, so there is no real problem, and we can thank God for the major spyware removal programs.

• Why do I get "mscms.dll is not a valid windows image" on everything I try?

  I'm working on the kinks of swap hard drive in my Dell E310. The original tested 'ready to die' so I installed a new. I bought the backup for XP Pro disk, when I bought the computer. I loaded the operating system on the new drive and did the updates (80 or almost). I regularly get the message "the file or dll C:\WINDOWS\system32\mscms.dll is not a valid windows image."  What now?

  I've damaged my file mscms.dll on purpose and could not get any message about it even though I know that it is corrupt - maybe I wasn't quite hard.   I know that some other mscms.dll errors, but they are different.

  Tell me what you're doing to regularly get the message because I'd like to see it.

  After reinstalling and apply the updates of 80 or more, one of them was Service Pack 3?

  If you are not sure which SP you re running, click Start, run, and in the type box:

  Msinfo32

  Click OK to see your system information and Service Pack and what does say?

  If the rest of your system works well, you can use Explorer to navigate to the c:\windows\system32 folder and rename your file to mscms.dll suspicious to a name, remember (like: mscms.bad).

  So if your Windows File Protection is not working properly, it will notice the missing file and quickly and quietly, to replace the missing file with a backup copy.

  Wait a few seconds... then press F5 in your Explorer window to refresh the view and see that the file has been replaced and you have the mscms.bad and a new copy of mscms.dll.

  You should see a message like this in your newspaper observer event system:

  Event type: Information
  Event source: Windows File Protection
  Event category: no
  Event ID: 64002
  Description:
  File replacement was attempted on the protected system file c:\windows\system32\mscms.dll. This file was restored to the original version to maintain system stability. The file version of the system file is 5.1.2600.5627.

  Restart and see how things look now.

  I can also send you a version SP2 or SP3 file mscms.dll via my SkyDrive and you can rename your suspicious file and replace to see if that helps your condition.  You might have some settings do not match here.

• application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  Hi everyone, my fathers laptop crashed yesterday and since then he was able to start and the following message appears

  application or the C:\windows\system32\odbcint.dll dll is not a valid windows image

  something appears then it restarts. I did some occasional checking of this problem, as believe that he may be able to replace the file with its installation in recovery mode disc, although neither nor I did before can someone provide some support on what to do, ideally if we can get into windows and get the docs off the laptop computer he is happy the new facility because I think that it maybe Basic virus/malware issue.

  Thank you for your time and help in advance

  If the c:\windows\system32\odbcint.dll file is missing, you see a message like this:

  User Interface failure
  The logon User Interface DLL msgina.dll failed to load.
  Contact your system administrator to replace the DLL or restore the original DLL.

  There is a button to click to restart, which when clicked, takes a while to reboot the system.

  If the c:\windows\system32\odbcint.dll file is corrupted, you will see a message like this:

  Winlogon.exe - bad Image
  The application or DLL C:\WINDOWS\system32\odbcint.dll is not a valid Windows image.  Please check this against your installation diskette.

  By clicking OK twice, you will see the message above about the failure of User Interface.

  There will be events in the case where the viewing Application log that look like this:

  Event type: error
  Event source: ODBC
  Event category: no
  Event ID: 0
  Description:
  Cannot find the description for event ID (0) in Source (ODBC). The local computer may not have the information necessary registry or message DLL files to display messages from a remote computer. You may be able to use the option/auxsource = flag to retrieve this description; For more information, see Help and Support. The following information is part of the event: unable to load the resource DLL odbcint.dll.

  You should figure out what happened to get into this situation and respond to the following questions, then decide which is the best plan:

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Fill in the blank: my system worked well until: _.

  Did the problem to the top after show installed new software and if so, what software?

  You have recently installed any type of remote control software?

  Now to fix it depends on how you are fixed to the boot media, since you'll have to start on something.

  We know that XP likes to keep the backup copies of critical system files in this folder:

  c:\Windows\System32\dllcache

  Knowing this, start in Recovery Console XP using your genuine XP bootable installation CD or if you have a genuine XP bootable installation CD, you can make one (no XP media required).  If you don't know what type of bootable media, you, do a CD of bootable XP Recovery Console and do not forget.

  If Yes, you want and are not in possession of a genuine XP bootable installation CD or a CD from Recovery Console XP bootable, the instructions to create a bootable XP Recovery CD of Console can / will be provided before any questioning begins.

  You can replace the missing file or suspect the XP Recovery Console by entering the following command:

  Copy c:\windows\system32\dllcache\odbcint.dll c:\windows\system32

  Answered in the affirmative if invited to replace the existing file and then you should see a message that 1 file (s) has been copied.

  If you get some type of a file not found message, the file is easily replaced using other methods.

  Remove the CD and type "exit" at the Recovery Console prompt to restart the system.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• RunDLL error message: "Werconcpl.dll is not a valid Win32 application" keeps reappearing

  Hello

  I have a Windows 8 operating system and about 2 weeks, I've loaded my computer and an error titled, "RunDLL" appears indicating:

  "There was a problem starting.

  C:\Windows\system32\WerConCpl.dll

  C:\Windows\system32\WerConCpl.dll is not a valid Win32 application. »

  This error message is always popping up to date.

  More information:

  -Another error will appear again once every 30 seconds or so, no matter if I press OK to close. That said, if I left my computer alone for long periods, fifty, maybe even a hundred of these messages would pile on my desk.

  -Many sources I've found seem to point to the idea that the cause of this is a process, probably malware, is set to run this WerConCpl.dll file at startup.  I have not all antivirus programs before that happened. But shortly after that, I installed Malwarebytes and I performed complete tests on Windows Defender and Malwarebytes. Initially, there are some questions that Malwarebytes had found and quarantined, but nothing on Windows Defender. I also tried to clean with a program of free registry: CCleaner. None of them were able to resolve the problem.

  -I then went to my task manager to start Services. I disabled some third-party services that I use, but it is not necessary to start. Other than that, I have not found all third-party programs that are strange or unusual. The rest were associated with my internet (wide com) and bluetooth devices, or Microsoft and Intel.

  -J' tried the solution that others used by running the command line as administrator and in typing "sfc/scannow". However, this does not work, and this error in the following line: "could not Windows Resource Protection start the repair service".

  -I can't do a system restore because I had already done the restore points, which was a bad idea on my part. However, system restore services have problems with the shadow copy of Volume and not more time to work in any case.

  * At the same time where this problem occurred, when looking for the solution to this problem, I found that a number of other things had stopped working on this laptop. I will not list all of them because it's a fairly large list, but this include services such as the Windows Installer Service, Windows Update services, and Windows store. I could do separate posts for all these but I feel like the root of these problems is related to this key error message.

  * If this can help, at his request, I could type in a list of all service issues and error messages associated with them. In general, they can be irrelevant to the topic of this post.

  Thanks for reading this,

  Samxratts

  Hi Sam,

  First of all, I want to thank you for providing the detailed information about this.

  In this scenario, I would suggest trying the following methods and check if it works for you.

  Method 1:

  Start safe mode and check if the same problem persists. If the issue is not still in Mode without failure, then place the computer in a clean boot state and check which program third party/app is causing this problem.

  Step 1: Safe boot mode.

  See the following article from Microsoft Help to start safe mode.

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  Step 2: put the computer in a clean boot state in order to determine what third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:

  Create a new user account and check if it helps. This is to check if the problem is caused due to any user profile related issues or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  Please reply with the status of the issue so that we can better help you.

• The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

  The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
  Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

  This has happened

  Each time Firefox opened

  few days back

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

  I have the same problem

  deleted expletives - Maurane

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• get a pop-up message "c:\windows\system32\ms32clod.dll is not a valid windows image.

  I get a pop up message "c:\windows\system32\ms32clod.dll is not a valid windows image" every time I start up windows XP.

  Can anyone suggest a solution please?
  Thank you
  Teabag123
  Hello
  • What were the changes made before the issue started?
  I suggest you return these methods:
  Method 1:
  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  a. click Start, click run, type System32.
  b. enter OK
  c. find mcenspc.dll
  d. right-click on the file, then click on Remove.
  e. restart the computer.

• The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk

  I am havin problems with my computer, when I start my computer or open a page or try to download anything it comes so far... The application or DLL c:/progna~1/windows~3/datamngr/datamngr.dll is not a valid windows image. Please check this against you instattation disk... I have a lot of problems in trying to solve how to fix this, as I don't know that much about computers. and I don't have the installation disc, I use windows xp I would be great if someone could help me please thank you. Kayleigh lindsay

  It also suggests that you can not run a software antivirus... If this is something you need to heal very quickly.  However, installing an antivirus application - if your PC is already infected - is usually ineffective.

  I suggest you do the following-
  (1) download and run a full scan using the Scanner for Ms.  Available here: http://www.microsoft.com/security/scanner/en-us/default.aspx
  It does not install, is therefore more difficult for malware to block.
  (2) if that was clean, then get an anti-virus in real-time as soon as POSSIBLE.  There are many good choices (Norton, McAfee, etc.) which costs money, and several good without applications, including MS Security Essentials available here: http://windows.microsoft.com/en-US/windows/products/security-essentials
  Note!  If you have another antivirus installed, do not add MSE.  Run two at once is precarious - they will conflict with each other.
  Also, make sure that your windows firewall is turned on, or you have another 3rd party firewall installed.

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image. Please check this against your installation diskette.

  I get a dll error message that says: "the application or DLL C:\WINDOWS\system32\kizinone.dll is not a valid Windows image.  Please check this against your installation diskette.

  I went to the system registry to find the file it refers and is not a he.  I ran a norton registry cleanup and a virus scan.  I did find something online that made reference to this dll file.  The message appears at any time that I start a new program.  How to fix this, or find the virus that is the cause.

  A Google search for "[insert the name of the file]" grown up nothing. When you get no hits for a filename on Google, chances are high that it is a malicious program file. You did not when you get the message. If it's only at startup, either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup. If you get the message during regular time on the computer and not not only at startup, your computer is still infected.

  Norton will do the job of cleaning and registry cleaners are garbage who at best will not do anything and the worst risk damage to your Windows installation.

  First of all, make sure that the computer is really free of virus/malware through these systematically - General malware removal steps http://www.elephantboycomputers.com/page2.html#Removing_Malware . Then, if the computer is really clean and you still receive the message, manage your Startup to remove the reference to the malware:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image.

  At the start this morning, I received the message following "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image. Is there a simple solution to this problem? If it is ok, the unit freezes then

  Hello

  1. you remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  I would recommend that you run a full scan using theMicrosoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose data while eliminating malware.

  Step 2:

  Test the issue in a clean bootand verify if the issue.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Make SFC scan and check if the problem persists.