DM1-4001 to THE stops randomly on the screen "starting Windows."

Similar Questions

• Satellite P300 with XP hangs at the screen "starting windows."

  I recently bought the Satellite P300 - 01 and had XP installed on it. I have fixed all the problems except for the question, that I'm going to start.

  When I turn on the laptop it loads everything flashes on the login screen and then hangs at 'starting windows' screen If I turn it off and then again about three times this issue finally arrives with the login screen. There was an ASP.NET account, and after the BIOS update that he disappeared, but the problem is still there? Any comments would be greatly appreciated.

  Thank you

  > There was an ASP.NET account, and he disappeared after the update of the BIOS
  The whole story is really strange

  I put t know how you installed XP on this laptop and why an ASP.NET account was created or exist, but in your case I would recommend doing so again.
  Then install all service packs, hotfixes and patches of the XP!

  Simply show words on XP on P300.
  A friend of mine has installed XP on a P300 yesterday too and the XP works well
  Everything works fine!

• When I try to logoff, the screen starts to Flash as trying to load screen and then finally shuts down the computer.

  Original title: Windows 7 problem

  I will have questions all the time my office. When I try to shut down rather than get the loggin screen the screen starts flashing as trying to load screen and then finally shuts down the computer. I just bought the computer and it runs Windows 7. What could be the problem? Oh I forgot to mention that, after that I start the computer the configuration screen appears saying that windows did not close normally and if I want to start in safe mode.

  Hello

  Here are a few questions to better understand the issue:

  1 made only while off log?

  2. what happens when you restart?

  3 have you tried with different user accounts?

  4 you did changes to the computer before the show?

  Let us try the following and see if they help.

   

  Method 1: Check the event viewer for more details on this subject.

   

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

   

  Method 2: Run the following fix:

  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

   

  Method 3: Perform the clean boot and check

  It may be that a third-party application is causing this issue. Put the system at boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 4: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

• What do you do when the screen starts to turn upside

  What do you do when the screen starts to turn upside

  Hello

  Please try this (Windows 7)

  Press the keys Ctrl and Alt at the same time then the arrow key press upwards (or downwards).

  Or fix this way

  • Right-click on an empty distinguished on desktop
  • Select Customize
  • Select display
  • Select change display settings
  • Do not use returned to the Orientation box.
  • Click OK/apply

  Kind regards.

• Windows will start, the screen starts flashing and then the screen say Logging Off, then restore the screen to the CTRL ALT DEL all other functions will not work.

  Start my computer, it will default to the CTRL ALT DEL screen.  After graduating in the login screen I enter the password.  Windows will start and then the screen starts flashing and the screen say Logging Off, then restore the screen to the CTRL ALT DEL I can boot into safe mode.  All other functions will not work.

  Thank you

  I guess you wanted to ask how to solve the problem. If then all in Safe Mode you can use system restore to set up Windows to a point when the problem did not exist.

• Smartphones blackBerry the screen started to Flash

  I noticed that the screen started flickering on my blackberry 8520.  Then all of a sudden he went and I can't turn it back on it.  I tried to take the battery out and it put it back again and that has not worked.  Someone knows how to fix this?

  It looks like he could be dead. LCDs sparkle normally unless they fail. Are you sure that the battery is fully charged?

• Why the screen of windows 8 turn on and turn off.

  Why the screen of windows 8 turn on and turn off.

  Hi Richard,

  Thanks for the update.

  Have you checked for loose connections power cable?

  I ask you to contact HP support, as this seems to be a hardware problem.

  If you have questions about Windows operating systems, help us on this forum.

• remove the screen-keyboard-windows-8

  Is-there-a-way-to-remove-the-WIndow-sOnline-Keyboard?

  How to enable or disable the keyboard on the screen in Windows 8 and 8.1
  http://www.eightforums.com/tutorials/40087-screen-keyboard-turn-off-Windows-8-a.html

  https://www.Google.com.au/search?q=disable+on+screen+keyboard+in+Windows+8.1&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & gfe_rd = cr & ei = SfJKU8ziJ8LC8gfqiYHABg

• XPS 8700 - black screen before you get to the screen of Windows 7. Help please.

  Hello. I recently bought 8700 XPS, replaced the 550W PSU and video card MSI GTX 660.

  The problem I have is the booting takes too long, almost 2 minutes. I see the screen black for about 1 minute before it goes to the screen of Windows 7.

  I updated the driver vga for later and others through dell system detects as well.

  What should I do to get rid of the black screen and reduce startup time?

  Boot in the Bios F2. Go to start. Boot USB support is set to disabled? If not, change it to disabled. Press F10 to exit the Bios and reboot.

• How to enlarge the screen of Windows Server 2003 on VMware Server 2?

  People,
  
  Hello. Because Windows 7 is not compatible must be installed to PeopleSoft PIA, I need to install VMware Server 2, and then install Windows Server 2003, which is compatible with PIA, on the virtual machine.
  
  But when I open Windows Server 2003 on the virtual machine, Win2K3 screen is very small, and its size is of about 1/4 of the screen of my computer screen. It is not comfortable to work for a long time.
  
  People know how to enlarge the screen of Windows Server 2003 in a virtual machine VMware Server 2 so that its size covers all of my computer screen?
  
  
  Thanks in advance!
  
  
  Lucy

  Did you already installed the VMWare tools in your guest OS in VMWare? In general, it helps a lot to be able to redefine a larger screen definition.

  Nicolas.

• The screen started after the update of the Sierra

  A few seconds after the awakening of my MacBook Pro, some large highly colorful randomly-shaped defects appear on several parts of the screen. Any suggestions?

  Hi buckeye351,

  I understand that you see some video distorted on the screen of your Mac just after that you wake up from its sleep. Which is certainly not normal behavior. I would like to make a few suggestions to help.

  As a first step, I recommend your Mac NVRAM reset. Take a look at this resource that goes on how to reset the NVRAM:

  How to reset the NVRAM on your Mac - Apple Support

  If you continue to experience this problem, check out this site to see if your Macbook Pro with the Retina display model corresponds to one of the models in question:
  Graphic problems - Support Apple MacBook Pro repair Extension program

  Take care!

• Notification of Firefox at the bottom right of the screen freezes Windows 7

  It seems that recently, Firefox (and maybe pop up notifications) are freezing my computer Windows 7. I used Firefox for years without this problem. In recent weeks, I noticed that system freeze seems to happen when a Firefox pop-up notification appears at the bottom right of the screen (for example Firefox 38.0.5 is available...). The mouse will continue moving the cursor on the screen for a few seconds, then that freezes at. I get no response from the keyboard, even CTRL-ALT-DEL and start button / stop fail to restart the machine. I need to remove and replace the power cord.

  Hoping that Mozilla has solved the problem I updated today to 39.0 Firefox, but when a plugin of Firefox browser introduced a notification in the lower right corner of the system froze again. I don't have this problem of gel when Mozilla Thunderbird shows a notification in the bottom right of the screen (e.g. XXXXXX received 6 new messages).

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• I am getting small black bars on the screen on Windows 7.

  Sometimes the bars little black randomly all over the screen then the disapear & the pc freezes I have to do a hard reboot, because it does not. I m running windows 7 64 bit. I've updated the stock but video card drivers that it has not fixed. Any other ideas? Thanks for any & all help

  Original title: Windows 7 black bars allover then freezes

  This looks like a probable hardware problem.   Check your RAM and temperatures although it may turn out to be the video hardware itself.

• Second the mouse pointer to the center of the screen of Windows 8 (office and metro) - Sony VaioT Ultrabook

  After a few updates MSFT uncontrolled or without reason, the boot of Win8 poster now the gray circle or circle with the mouse pointer in the Center on the login screen of the touch screen. Try moving the pointer with touchpad shows second pointer, and the original remains flashing in the Center. By connecting to the Metro interface, the cursor of the Center remains in the Center, and it is possible to move subway tiles by dragging the screen.

  When you go to the office, the pointer to the Center rest sometimes, sometimes disappears; When there, open and close the Task Manager without doing anything he removes the unwanted pointer. When removing the additional pointer in the Center, office does not respond to tap and double tap. and does not show the rectangle of the area of selection, as he usually did. However, the touch screen digitizer apparently works as the key, and touch multi-touch show shadows in the points of contact. It also allows to scroll the text in the browsers to slide the touch screen. But the zoom and the valves do not work.
  I also noticed that a few seconds after that the Office will appear on the screen, the touchscreen works as he used before (look and work area selection), but they stop working after 3-4 seconds and you can only take account of the points of contact and scroll the text in browsers (no resizing)...
  Device Manager displays the digitizer as 'USB input device' USB\VID_04F3 & PID_0018; It is impossible to find the name of the vendor or update the driver. The device also creates objects of device HID four children. The digitizer can be stopped and restarted from the Device Manager; upon restart, the Center pointer appears again, or a white square is displayed. Touch the place goes the arrow-shaped pointer in the gray circle of key indicator in the center of the screen. Open and close the Task Manager remove the pointer from the Center.
  Sometimes, when you move a pointer 'true' with the touchpad as the arrow in the Center pointer is replaced by a helping hand or cheek two arrows.
  It seems that there is an application or a service that loads with office and seizes 'touch down' messages, do not let them be served by gui. However, I don't find anything unusual in starting programs or services; Virus scan shows that the machine is clean.
  I thought it might be a ClassicShell likely to interfere, but removing it does not change the behavior. Neither the removal of all the utilities of the startup list startup.
  It is a software problem, suggestions, which could bring him or how to find the root cause of the problem are appreciated.
  I saw a similar description of the behavior on the forums of Sony, but there was no resolution.

  FIXED! My laptop had this problem from day one.  I found a thread where some people had fixed it by going into the properties of the mouse and two enabling paths (shortest path setting was OK and barely perceptible) or by changing the standard display cursor to enlarged (or black).  But this does NOT work for me.  Here's what worked completely:

  I turned off the touch screen.  Who needs him--it was a stupid idea of Windows 8, in any case, and the compromise to solve this question "cursor ghost" was worth WAY.

  Go to Device Manager.  Under Interface devices, there are 2 lines for input USB device.  (If there is more, temporarily disconnect the receiver wireless mouse or another USB input device).  Disable the first, one in right-clicked on it and selecting Disable.  And the problem is GONE!  I hope this helps.

  Maybe the screen had a defect that makes act like an invisible finger relying on, or more likely, it's a Windows 8 bug affecting some machines.  In any case, it's a huge relief to see it fixed, because the cell phone was horrible, when this happened.  Good luck!

• Adobe Connect software component snap-in crashes when I try to share the screen in Windows Vista Home Premium (32 - bit) Service Pack 2

  The Adobe Connect Add-in crashes when I try to share the screen (office) in Windows Vista Home Premium (32 - bit) Service Pack 2. I get the error message with the title "Adobe Connect Add-in has stopped working". The message said: "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "The only button I can click on is"close the program ". I made sure that the screen resolution is a multiple of 16 ("1280 by 768 pixels"), as this article says. I use Adobe Connect 9 with the 'named price model host. Does anyone have the solution to this problem? Thank you.

  Do not know what could cause the problem, but Vista is not an operating system, for what it's worth.

  Acrobat Connect Pro data sheet

  I suggest that you uninstall and reinstall the Flash Player and see if it helps Uninstall Flash Player | Windows.

  It looks like not the resolution of the screen is the problem, as you mentioned, it should be something else. I would also recommend that you check your video drivers to see if there is an update, because who could help.