DNS error cannot find server

Similar Questions

• Control of the database on Windows - gives error cannot find server or DNS error

  Hi all
  
  After the installation of 10g on Windows services necessary for my new db are running, earpiece is in place.
  
  But when I try to set up the database via http://pnclultraprd.corporate.mem.5500/em/console/logon/logon control
  I get "cannot display the page. Can not find the server.
  
  I did have this before on new facilities and I'm stuck.
  
  Any tips? Thank you, John

  I just noticed that you have un.5500 instead of: 5500 in your URL

• I try to go to the website of tomtom and I get an error message DNS-cannot find server.

  I try to go to the website of tomtom and I get an error message DNS-cannot find server.  I tried the computer desktop and laptop and do not know what the problem is. I thought it was the Web site, but I could put my internet work top. Help, please.

  How your internet connection are connected, if you use Proxy, then try to uncheck bypass for local addresses...

  If you use a direct connection without proxy, even try to open in another browser, firefox IE, if its opening try to update the browser to your desktop computer.

  Thank you & best regards

  Alex k

• How can I fix the cannot find server error when you use Bing?

  When I want to use Bing as a search engine, I always get an error message cannot find server. When the connection problem is diagnosed, the result is that there is not a problem with the connection. I get the same thing when I use the Google search engine. OT most of the time I'm successful search with Ask. I use Windows XP.

  Hi MineMN,

  ·         Did you do changes on the computer before the show?

  ·         What web browser do you use?

  If you are using Internet Explorer, follow these methods.

  Method 1: Follow the steps in the article.

  "Internet Explorer cannot display the webpage" error in Internet Explorer

  Method 2: If you still face the same problem reset the TCP/IP stack.

  How to reset the Protocol Internet (TCP/IP)

  Method 3: Reset the proxy server. Follow these steps:

  (a) click Start, run, type cmd , and then press enter.

  (b) type the following commands at the command prompt and press enter after each command:

  proxycfg d

  proxycfg-u

• "Cannot find server" when connecting to the database homepage

  Until someone tells me to look at the other post on the first page of the forum with a similar title... I've already read through it. I also did a search of the forum, but I'm still stuck.
  
  Let me start by saying that I have almost no experience on one database other than writing queries. I installed Oracle Express 10 g today for I can have access to a development environment to test my queries on the sample data. After installation, it automatically opens a web browser, pointing to the URL: http://127.0.0.1:8080 / apex, the page could not be loaded (error Internet Explorer: "cannot display the page." and at the bottom of the page: "Cannot find server or DNS error"). I decided to restart my computer to see if that would make a difference. Then, I opened the link 'Start' in my Start menu in the new folder of Oracle. It instructed me to first of all, go to the home page of the database (with the same URL: http://127.0.0.1:8080 / apex), and the page still doesn't load. Based on the posts that I could find on the subject, I chose "Start Database" of the Oracle folder in my Start menu. In the command window that pops up, he says:
  

  C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleXETNSListener
  The requested service has already been started.  
  
  More help is available by typing NET HELPMSG 2182.
  
  C:\oraclexe\app\oracle\product\10.2.0\server\BIN>net start OracleServiceXE
  The requested service has already been started.
  
  More help is available by typing NET HELPMSG 2182.

  Then... It looks like the database and listener are already started, so I don't think that's the problem. So, I'm stuck. I am trying to access to this on the same computer, I installed it, and I don't plan any time in the future where I will need to access the database remotely because it is just a test environment for my personal use.
  
  The most recent post on this subject, I saw something to try to go to http://hostname:8080 / apex. And, forgive me if this sounds like a stupid question, but I guess I have to replace "hostname" in this URL with whatever hostname actually is... right? So, uh, how can I know what is the host name?
  
  Published by: user11033437 on April 15, 2010 13:18 (corrected to default URL)

  Well, looks like the answer to one of the previous questions, "isn't the database running" was ", not really" :(

  If there is no newspaper alerts, there no database, most probably the \oraclexe\oradata\XE\ does not contain. DBF files - try manual cleaning (remove registry entries, the Windows install cleanup, etxc.) following ALL the steps in the http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABFFJIB

  And check to make sure that your connection to the PC is in the local administrators group (domain administrator is not enough here) and run the installer... what version of Windows? XP? 2003?

• Windows Mail cannot receive or send after update-'cannot find server '.

  Original title: Windows Mail cannot receive or send after update

  Use Windows Mail with Vista OS. Has been very well until we had an update last night and now not receive or send and the login box asking username and password keeps popping up. An error code is displayed that says cannot find server. Please advise?

  Hello

  Faced with this problem only with Windows Mail?

  I suggest to go through the following points and check the settings in Windows mail.

  Troubleshoot problems with Windows Mail.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Working with Windows Mail in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

  Hi all

  I have created a native extension in the BB SDK 10.2 to connect to data services and request a server using the CellualarDataInterface API.

  It was packed, but when I run it in Simulator or device, it shows error:

  Need error cannot find /usr/lib/webplatforms/plugins/jnext/customPlugin.so library cannot be found

   

  I read that it is the link error but not able to identify the problem.

  Here's the URL where my BB 10 code example is hosted:

  http://www.filedropper.com/SampleApp (Go to this link and click Download this file)

  Please help me find the solution. It is very urgent.

  Finally, I solved this error by adding the network of Qt library.

• When I try and update my creative cloud app it says cannot find server

  I need to update my creative cloud on my computer application.  When I try to it says "cannot find server".

  Can anyone help on this?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Safari cannot find server Outlook can ' t access my e-mail?

  Safari cannot find server Outlook can ' t access my e-mail?

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• Dynadock V10 - "error cannot find Setup file" INSTALLER ERROR

  Hi I have a toshiba dynadock V10.

  Whenever I try to install the drivers, that it says "error cannot find Setup file. I have downloaded the latest drivers and off my anti virus and cut all the proiceses running and no go. There are a few references to this on the internet, but none has a solution.

  I amn trying to install it on an equium U400 running windows 7.

  Curiously, it loaded on an old dell pc easily!

  I spent hours looking on the net and there is no answer. I have nothing showing in the programs to uninstall.

  Thank you

  > Oddly enough it loaded on an old pc easily!
  Hello

  This means that drivers are ok and that there must be something wrong with the system pre-installed on Equium U400.
  How to proceed?

  It is important that you don't would NOT connect the Dynadock to the laptop before installing the software and drivers was not finished.
  Therefore, you need to install the software first. Then after new reboot connect the Dynadock to portable and installation would end the next steps.

• Safari cannot find server

  Safari cannot find server

  1 remove the Cookies.

  Safari > Preferences > privacy > Cookies and other data from the website:

  Click on the button "Details".

  Delete all cookies except those from Apple, your internet service provider and the banks.

  2 safari > Preferences > privacy > Cookies and other data from the website:

  Always choose 'allow' and test.

• Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

  I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

  When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

  the other PC also has 7.0 and 8.1 DAQmx Labview.

  I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

  Hi LabTech09,

  When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

• TestStand Java - 1500 error cannot find the class

  Hello world

  I use Java 1.7 and TestStand 2010.

  I try to add a java class in the computer example folder and call the method.

  The java class is just as below, because I'm just trying to call my own java class.

  I put the class path to start the JAVA virtual machine in the directory where the example of the computer (which is also the directory where I put my java class).

  TestStand can call methods of the computer, but not mine (received the error 1500 error cannot find class). I put my my java method call among calls for default computer example.

  Also I read similar topics, but again I can not resolve the error.

  Where is the part that I'm bored, in fact? Please share some ideas.

  Note: I even try to leave the empty class path, but TestStand can always call the methods of the computer. Why?

  ----------------------

  public class TestJava {}

  Public Shared Sub main (String [] args) {}

  }

  public String returnString(boolean a) {}
  Return "success";
  }

  }

  To load a class which is within a package, you can use the package rating (or change the example in order to to use). The path to the class is passed directly to the JAVA virtual machine to load the class, but really what is necessary is the package from the class path, including the full path to the class.

  This means you need to do the following:

  1 set the class path in the base directory where you created all your classes, if you have the following structure:

  • MyFile.java
  • builds
  • • MyPackage
    • • MyFile.class

  You must set the classpath in the builds directory

  2 when you set up your steps, you must set the path to the class in your steps from Java to MyPackage/MyFile.class (note the separator is a forward slash, not used Windows backslash, then the Browse button is not quite help with that).

  Another important thing is that when you set the classpath variable you remove the normal Java class path, if you are using Java classes from the library by default, you may have to add \lib\rt.jar

• Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  I recently noticed this error message-

  Critical error: cannot find the file [CardGames.dll]. The game cannot continue.

  whenever I try to click on a card game.  Help, please!  Is there something I can download again to fix this error?

  Hi jaymeister3580,

  It seems that the problem is related to the installation of the game itself, I suggest you try the following steps:

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below. The following steps are worth a try:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Check if the problem persists

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is a message "cannot find server" a problem with Internet connectivity or something else?

  Original title: Net question?

  When I get a message "cannot find server", is this a problem with internet connectivity or something else?  MSN and explore will be not open.  Thank you.

  Hi Aziz,.

  The Cable Guy came and installed a new modem and the new thicker cable.  So far so good.  Thanks for your reply.