do gfve Oracle a certificate to pass their test?

Similar Questions

• Satellite A500 - HDMI never knit - error don't pass the test regza

  Hi mate,

  I come from Italy and, first of all, I want to apologize for my English... ^ ^
  I'll try to explain my problem:

  Whenever I try to connect to my Pc to my TV by HDMI port "Satellite A500'... an error pops up:

  _The tv is turned off or in standby or does not pass the test regza... _

  What it means?
  What can I do?

  Thank you

  concerning

  Hello

  As I know some of the Toshiba LCD TVs supports binding Regaza.
  This feature allows you to control the device (laptop, LCD monitor, etc.) using only a single remote control.
  But this only works if all devices support the link Regaza.

  If one of the devices (LCD or laptop) doesn t supports the link Regaze then you will probably get an this error message.

  Of course, you can disable this feature as well.
  I m not very well, but you should check the Toshiba applications preinstalled on your laptop (Toshiba assist, etc.). In addition, you should consult your manual for more details

• How to access the information in the report of a pass/fail test?

  I'll call you a LabVIEW VIs of TestStand which are configured as ' pass/fail Tests. The result of the Boolean "PASS/FAIL" of LabVIEW indicator apparently are accessed through the variable RunState.SequenceFailed of TestStand. However, I can't find a similar TestStand variable that contains the information of 'Text of the report' of LabVIEW. Not such a variable exist, nor will it take to create a?

  Hi bmihura,

  The best approach would be to use direct information from the stage itself. You can get the text of the report of the RunState.Step.Result.Report text

  In this way, you go to the step text report directly.

  Alternatively, you can store the text of the report to a variable in the parameters of the step.

  I hope that gets things moving along to you!

  Kind regards

• How to change the position of 'you passed the test?

  Hello

  I need help on how to change the position of the message "congratulations, you passed the test. Perhaps the failure message.
  It should be in the Middle, but now to the left, it sinks in the background.
  I Don t see where to change it. All of the index are adjustable but it escapes me...

  
  Thank you very much!

  I think you are talking about the area of control on the slide to score? Move this area result or score slide himself slide.

• Pass a test of component

  Hello

  I'm new to Flex and have a number of book before a course in 2 weeks, I created a main appliciotn with the function and can handle events

  private functionfillLabel(evt:Event):void{}

  myLable.text = evt.target.label;

  myButton2.addEventListener (MouseEvent.CLICK, fillLabel);

  }

  []] >

  < / mx:Script >

  < mx:Panel x=" 320 "y =" 127 "height =" 200 "width =" 250 "layout =" absolute "title =" tests of events " " > "" "

  < mx:Label x=" 55 " y=" 45 " id=" myLable " />

  < mx:Button " label = ' Text1 " id=" myButton " x=" 90 "y =" 96 "click ="fillLabel (event)" / >

  < mx:Button " label = ' Text2 " id=" myButton2 " x=" 90 " y=" 126 " />

  < / mx:Panel >

  I also creeate a component, and past custom events the component to the appliciotn main and managed the event

  I can pass values of data [Bindable] in to the 'myButtonComponet '.

  so it's out of the 'myButtonComponent' in the recevine, all good componet a well.

  Thus, compoinent "myButtonComponent" now has a public function that displays a message, nothing complex

  the problem is

  How I would "myButton" passes the test of 'myButtonComponet' to make the function work

  that is to bind the click event of you "mybuttomn" do the Componet "myButtonComponet" do a job

  Your just be difficullt to life for yourself and try to write code that will be confusing.

  If I understand you correctly,

  The user clicks on the button 1. The 'something' do, then tell button2 to do "something else".

  Don't, don't.

  Write your code like this:

  Better yet write separate handlers for this sort of thing...

  and put the code you need within these managers.

  Paul

• Oracle B2B certificates

  Hi all
  In oracle 11g B2B we need create certificates on the same server, or we can create any server (that is, do we need to install oracle wallet manager on the same server (host) B2B or can be installed on any server to create a certificate)
  
  Concerning
  REDA

  Hi reda,.

  Where is the right place to run these scripts?

  Once you have defined the environment using the setWLSEnv script, you can run the script on any location in the file system. Make sure that you use the command prompt shell/same on which you ran setWLSEnv. You can create the keystore to a machine and you can use it to another machine in addition (for client certificates that are used for signing and encryption). For server certificates (which are used to establish the identity of a machine to remote machines), it is recommended that you create the CSR on the same computer where the server is installed.

  What is the location to place the file of keys and certificates in b2b of oracle 11g?

  You can place it anywhere on the same computer where the server is installed.

  Kind regards
  Anuj

• Oracle 11g SQL Fundamentals pass score

  Hello
  
  Anyone confirm what is the pass mark. The page (http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41 & p_exam_id = 1Z0_051 & p_org_id = 28 & lang = en) says it is 60% on 70 questions, but this page (http://www.oracle.com/global/us/education/certification/score_info.html) says do not trust him because it can change at any time without warning...
  
  Mike

  I did the 1Z0-051 exam 3 weeks ago, the pass mark was 60%, but as mentioned, it is possible to be changed by Oracle.

• Oracle apex 5.0: pass values from one page to the other as well save you can save same value in the table.

  I use oracle apex 5.0

  Issues related to the:

  (1) I created an application where I have a form on which I have a button named 'Add', now if I click on that button values need to be stored in table.how to create! I use the dynamic button that is created by the html tag < input type = "button" > need help with this.

  (2) if the value stored in the table how the same value will be on the agenda of the calling page. ?

  New to this world of Apex.

  concerning

  Pranav shah

  http://zderadicka.EU/Apex-dynamic-actions-with-report-region/

• Form of Oracle 10 g by passing the parameter of the forms to reports

  Hi all
  
  I work in 10g AS and have a form which is called a Menu. When we run the form he asks that the connection information. and once it is successful, then it opens a menu.
  Here in the menu, I ask a report before a form of parameter. In this setting, I have 3 userid startDate and endDate fields.
  
  It's the part of my code that executes the report.
  
  ADD_PARAMETER (PARAM_ID, 'Hogshead', TEXT_PARAMETER, USER);
  ADD_PARAMETER (PARAM_ID, 'start_date', TEXT_PARAMETER, TO_CHAR(SYSDATE,'DD-MON-YYYY'));
  ADD_PARAMETER (PARAM_ID, 'end_date', TEXT_PARAMETER, TO_CHAR(SYSDATE,'DD-MON-YYYY'));
  
  Rep: = find_report_object ('MyReport');
  vc_reportserver: = 'rep_prothonotary5_FRHome1 ';
  
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_COMM_MODE, SYNCHRONOUS);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESTYPE, cache);
  SET_REPORT_OBJECT_PROPERTY (REPID, REPORT_DESFORMAT, 'HTMLCSS');
  SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_OTHER,*'paramform=yes'*);
  
  v_rep: = RUN_REPORT_OBJECT (repid, PARAM_ID);
  
  Here I am able to get the report when I speak of paramform = no. As the parameters are passed directly to the form. Start date and end Date will be SYSDATE as it is in the code above.
  But I need to be as paramform = yes, so that the form of the parameter appears before the report and, I can change the settings for Start Date and End Date . When I put paramform = yes in my code, the parameter form appers, but this form of parameter, there is a button submit Querry and Reset and when to drop querry button is pressed, the page Web site can not display the page .
  
  How should I make it work?

  a possible solution is to create a simple form to let the user enter its parameters, and then call the report itself with paramform = no

• Audit of the Oracle: capture terminal id passes amended

  ORACLE 10.2.0.4
  
  
  I wrote the following code to display the e-mail notifications to any user account that has been an invalid connection attempt.
  
  
  Select username, timestamp, terminal of dba_audit_session where returncode = 1017 and
  timestamp > sysdate - 62 /(24*60) and
  user name in (select username from dba_users where profile = "DEFAULT") order of timestamp.
  
  
  No one knows what would be the returncode if a password has been changed?

  user10784896 wrote:
  So where can OK - I get this information? Will there be another audit table, I need to ask?

  Yes you have to table of sys.aud$ query to get that information if audit on change user are enabled.

  Concerning
  Anurag

• passed the test after the step failure

  Hello

  I have a stage with test of numerical limit.

  I checked in properties, under run Options, step failure causes the sequence

  But when I washed up on the market, the result of the test is passed.

  When I change the Actions Post - on is not going to the next step Goto cleanup

  then the result of the test is failed.

  I have two other stations where I limited digital test with the same properties, but here I don't have to go to cleanup for a failure result.

  I use TestStand 2013.

  Please help me, thanks

  / Magnus

  Magnus,

  Instead of setting RunState.SequenceFailed in your Expression after, try setting Step.Result.Status to this value instead. It worked on my machine.

  I hope that helps!

• Brother HL-2140 printer has not passed logo testing for XP

  Use printer Brother HL-2140 for nearly two years without problem. Recently started to receive the message "Printer not passed Windows Logo testing to verify its compatibility with Windows XP Pro." Tried to change the settings through "driver settings" and "security options". Printer works but I find annoying pop ups whenever I go to print something.

  If you uninstall the current driver can change the warn to ignore, restart your computer and reinstall the current driver the popup should disappear.

  This is the driver that is causing the popup.

• Pavilion DV6 freezes but passes the Tests of memory and HARD drive

  I have a dv6-3025dx that the POST is fine. It does not start after the screen 7 start, the recovery Partition loading bar or a Windows 7 recovery disk loading bar. The HP Vision diagnostic and a drive OEM 7 freeze as well. Start with a Ubuntu DVD displays icon on the keyboard at the bottom then nothing else than a cursor flashing at the top left of the screen. The HARD drive and memory in the BIOS Tests pass but the start-up Test, the Burn-in Test and the Test of memory in the partition the disk diagnostic all freeze immediately.

  I reset BIOS, change the RAM with known working sticks and clone the HDD on a well known player and still get the same result. I had to clone the drive from a different machine, because Acronis True Image 2011 boot disk crashes after the splash screen. A 3rd party BACK base RAM and HDD tests pass with flying colors; including Windows, MemTest86 Memory Diagnostic + and video memory Stress test. Basically, I can't start any GUI environment. only of DOS or Linux command line. I'm guessing that maybe the video chip? Ideas or confirm my diagnosis?

  Thank you!

  You make text based OSes seem to work well. This could mean that the video card is at fault with loads greater than the bare.

  However, it could also be a SATA controller flaw that does not correctly handle the load. There is really no way to test this reliable I found.

  No matter whether the video controller or the controller SATA, the result is the same and that is replace the motherboard. If it was office, a SATA PCI-based controller can be purchased cheap enough to exclude it. However, this is not an option here.

  It really isn't too much other material in a notebook that is involved in the boot process and most of the material is soldered to the motherboard.

  I'm sorry.

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.