do not allow protocol analyzers

Similar Questions

• How I can corect the following protocols (rtsp) is not associated with any program or is not allowed in this context

  The address was not included

  Firefox doesn't know how to open this address, because one of the following protocols (rtsp) is not associated with any program or is not allowed in this context.

     You might need to install other software to open this address.
  

  I'm not a Curmudgeon, so please keep it simple.

  Thank you

  Firefox 32.0.3 has this security update.
  You can check the version in "> about".

• I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You mi

  I am installing CC on an iMac late 2015. I get the following error message: Firefox doesn't know how to open this address, because one of the following protocols (aam) is not associated with any program or is not allowed in this context.      You may need to install additional software to open this address. "Someone knows what's going on?

  Please try to download from: https://helpx.adobe.com/creative-cloud/help/install-apps.html. You can also try to download using the different browser.

• Firefox MAC v30 with proxy must authenticate "Cache Access Denied" sorry, you are not allowed to ask: this cover until you have authenticated

  Firefox functioned perfectly until we have updated to version 30.0. It seems that the new version does not like our Proxy Configuration that requires users to auth with their AD accounts.

  In the latest version, Firefox will appear a box that allow you to type the user name and password that works perfectly. However, this is not pop up anymore and gives me this error message.

  The following error was encountered:
  

     Cache Access Denied.
  

  Sorry, you are not allowed to ask:

     http://www.google.com.au/url?
  

  This cache until you have yourself authenticated.

  I try to configure the username into a key ring and allow firefox to access manually, but Firefox seems does not access this key chain at all.

  Is that someone has a problem with the proxy server that needs to authenticate in Firefox30.0? Does anyone know the possible solutions?

  Thank you very much!

  Shuopan

  Trouble Shooting - update

  Interestingly enough, Firefox works for 1 minute after I use Safari with proxy Auth. However, if I get Safari for 1 or 2 minutes, Firefox will be stop working and displays similar error message.

  tried network.http.use - cache = false but does not work

  Thank you

  We find the solution of Philipp is useful.

  "Hello, this is perhaps due to the deactivation of some insecure authentication protocols in firefox 30: https://www.mozilla.org/en-US/firefox/30.0/releasenotes/#whatsnew .

  You can try to enter: config in the firefox address bar (confirm the message information where it appears) and search for the preference named network.negotiate - auth.allow - insecurity-ntlm-v1. Double-click it and change its value to true. »

  https://www.Mozilla.org/en-us/Firefox/30.0/releasenotes/#whatsnew

• The area is blocked: * siteremoved * is not allowed on this network.

  I go to a site that I go to every day and all of a sudden, I'm being re-directed to http://block.opendns.com/main, and the page reads:

  THIS DOMAIN IS BLOCKED.
  Www.xxxxxx.com site is blocked is not allowed on this network. OpenDNS

  I checked my router settings and nothing is blocked. I checked this first because I recently opened Upnp to allow a game.

  I do not use a DNS service and I can't understand how to 'allow' this site on my network.

  Can someone tell me where to click to allow a site on my network?

  original title: THIS FIELD IS BLOCKED.__Site blocked www.xxxxxx.com is not allowed on this network. OpenDNS

  192.168.1.1 is the local address of your modem or router.  In turn, your router or modem gets its information from your ISP DNS, unless ignore you it with a manual setting.

   

  I have a Vista computer handy, but on my computer Windows 7 I would right-click on the connection in the task bar icon, select "Open network and sharing Center." Then click "edit card settings. Right-click on the adapter used (without wireless or LAN), select Properties, then 'Protocol Internet Version 4 (TCP/IPv4)', then properties. Instead of "Obtain DNS server address automatically" click "use the following DNS server address". Enter 8.8.8.8 and 8.8.4.4 in two spaces, click OK and restart. Did that fix the problem?

  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------

  "LanCyfer" wrote in the new message: * e-mail address is removed from the privacy... *

  ... DNS server: 192.168.1.1

  "LanCyfer" wrote in the new message: * e-mail address is removed from the privacy... *

  where should I click to check the settings of the DNS on my PC?

  Vista

  Gary van, Microsoft MVP (Mail)

• Windows Mail error 0x800CCC92: Operation of Pop is not allowed for this user

  Split of: ' "windows mail error code: ox800CCC0E, error code 10060".

  Account: 'mail.bigpond', server: 'mail.bigpond.com', Protocol: POP3, server response: '-ERR pop operation is not allowed for this user.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  It's what keeps appearing on my Windows Mail when I go in there. BigPond say they have problems with Windows Mail and try to fix it.  Any ideas please?

  Thanks LyndaBeresford

  If they have problems, then it is not that you can do about it until they solve these problems.

  You can access your e-mail via webmail: https://signon.bigpond.com/login?site=chw&goto=http%3A%2F%2Fmessaging.bigpond.com%3A80%2F%3Fref%3DNet-Head-Webmail

  Steve

• E mail error code: can only receive emails, unable to send: Server error: 550 server response: 550 5.2.0 you are not allowed to send an email to < Email removed for privacy protection > E9210 Windows Live Mail error ID: 0x800CCC69

  Original title: E mail error code: can only receive e-mail, cannot send: Please help___Here is a copy of my error? I have check all emails put in place, even with the internet provider, they said that to come here and see if anyone knows?

  An unknown error has occurred.

  Topic "

  Server error: 550

  Server response: 550 5.2.0 you are not allowed to send a mail to <*** email="" address="" is="" removed="" for="" privacy="" ***="">E9210

  Server: 'smtp.charter.net.

  Windows Live Mail error ID: 0x800CCC69

  Protocol: SMTP

  Port: 25

  Secure (SSL): No.

  Hello

  The question you have posted is related to Windows Live and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.

  http://windowslivehelp.com/

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• 2960 will not allow "switchport trunk encapsulation dot1q" CLI

  I have a Cisco 2960 switch that does not allow me to configure the switchport trunk encapsulation dot1q on a trunking interface.

  The features of the watch that the interface can use 802. 1 q, but when I try to CLI the command encapsulation of work is not an option.

  Please give us a solution.

  Thank you, S

  Model - WS-C2960G-24TC-L

  Version SW - 12.2 (44) SE6

  Image of SW - C2960-LANBASEK9-M

  S1 #.

  S1 #sh int gi0/23 capabilities

  GigabitEthernet0/23

  Model: WS-C2960G-24TC-L

  Type: 1000BaseLX SFP

  Speed: 1000

  Duplex: full

  ENCAP of trunk. type: 802. 1 q

  Trunk mode: on, off, desirable, nonegotiate

  Channel: Yes

  Removal of broadcast: percentage(0-100)

  FlowControl: rx-(off,on,desired), tx-(none)

  Fast Start: Yes

  QoS scheduling: rx-(not configurable on a per port basis),

  TX-(4q3t) (3T: two configurable values and one fixed.)

  Rewrite coS: Yes

  ToS rewrite: Yes

  UNI-DIRECTIONAL: Yes

  Food online: no

  SPAN: source/destination

  PortSecure: Yes

  Dot1x: Yes

  Several Types of media: rj45, sfp, automatic selection

  S1 #.

  S1 #.

  S1 #.

  S1(Config-if) #switchport?

  Set the access mode characteristic of the interface

  Backup set for the backup interface

  block disable them unknown addresses forwarding uni/multi interpreters

  host port Set

  the interface Set trunking mode

  nonegotiate device engage not in the negotiation protocol on this

  interface

  port-security security associated with order

  priority Set 802 .1p device priority

  protected configure an interface to be a protected Harbor

  trunk trunking features Set of interface

  device attributes voice voice

  S1 #.

  S1 #.

  S1 #.

  S1(Config-if) #switchport trunk?

  admitted only allowed together features VLAN when the interface is in binding mode

  native definition trunking features native when the interface is trunking

  mode

  pruning pruning Set VLAN features when the interface is in binding mode

  S1 #.

  S1 #.

  S1 #.

  New devices do not support ISL so you can run 802. 1 q. This means there is no need of an encapsulation command what an encapsulation being supported. If the device has support for ISL, then you must also this command.

  Daniel Dib
  CCIE #37149

  Please evaluate the useful messages.

• (Browser) clientless SSL VPN access is not allowed.

  I'm trying to set up an additional Anyconnect vpn profile.  I have one that is working properly but this news will not.  When I try to log in to download the client or try to connect with a computer that already has the customer I can not.

  The client side receives this error: "access (Browser) Clientless SSL VPN is not allowed."

  On the ASA journal:

  4 May 10, 2010 11:42:17 722050 group user <> IP <10.12.x.x>Session is over: SVC is not enabled for the user
  4 May 10, 2010 11:42:17 group 113019 =, Username =, IP = 0.0.0.0, disconnected Session. Session type:, time: 0 h: 00 m: 00s, xmt bytes: 0, RRs bytes: 0, right: unknown

  He does reference the main our ipsec connection group name.  I think it's very strange.  Here's the part of my config that treats the ssl client.

  tunnel-group type SSL - RDP remote access only
  tunnel-group SSL-RDP-Only general attributes
  address pool SSL_VPN_Users
  authentication-server-group FUN-LDAP
  Group Policy - by default-SSL-RDP
  tunnel-group SSL-RDP-Only webvpn-attributes
  enable VPN_FUN group-alias
  allow group-url https://64.244.9.X/VPN_FUN

  internal SSL - RDP group strategy
  attributes of SSL - RDP group policy
  value of VPN-filter RDP_only
  VPN-tunnel-Protocol svc webvpn
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list RDPonlyVPN_splitTunnelAcl
  WebVPN
  list of URLS no
  SVC request no svc default
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  Standard access list RDPonlyVPN_splitTunnelAcl allow 10.12.x.0 255.255.255.0
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389
  Comment by RDP_only-.x RDP access list
  RDP_only list extended access permitted tcp SSLVPN-pool 255.255.255.0 10.12.x.0 255.255.255.0 eq 3389

  mask of local pool SSL_VPN_Users 10.12.20.1 - 10.12.20.100 IP 255.255.255.255

  Post edited by: kyle.southerland

  After reviewing the config, the difference between groups Anyconnect and SSL-RDP-Only is the AAA server.

  AnyConnect group uses the radius for authentication (RAS01) server, while the SSL-RDP-Only group uses an LDAP server for authentication (FUN-LDAP), and the configuration of the FUN-LDAP server, you configure the mapping of LDAP attributes, which is to map the group "An1meR0xs".

  To test, change authentication LDAP aaa RADIUS for the newly created group.

  Hope that helps.

• Player Windows 12 will not allow streaming on a single computer with ATT

  Windows player 12 will not allow streaming on a single computer with ATT but goes with another computer.  When streaming is selected, it refers to the administration tools.  Now what?

  Hello

  AT & T ATT are you referring?

  I suggest you refer to the following Microsoft help articles and check if it helps.

  The protocols in Windows Media Player use for streaming?

  http://Windows.Microsoft.com/en-us/Windows7/which-protocols-does-Windows-Media-Player-use-for-streaming

  Change settings for streaming media in Windows Media Player:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-streaming-media-in-Windows-Media-Player

  Hope the information is useful.

• I really wish that I don't have to Deauthorize all of my devices - I am disappointed that Apple does not allow me to see the computers I've allowed and allow me to Deauthorize them individually

  I bought a new computer and you want to authorize iTunes.  Only to discover that you can authorize only 5 computers simultaneously (which is disappointing to say the least in the first place - why the limit.  Also, now I learn to disable allow a computer I have, I have to disable allow all my devices... my iPad, my iPhone, my MacMini, etc..  one of my devices is actually used by my parents in their cabin, and if I disable this one... it's 4 hours away just to reauthorize again... not very efficient if you ask me.  Is there a way to allow MORE THAN 5 arbitrary and if not, then is it possible to allow out of an individual computer to the account - and if not, how many days will take apple to find a way to do?

  I have to allow my iPad, my iPhone out of all my devices...

  No, you don't, iOS (iPhone, iPad, iPod Touch) devices are not allowed for an account and therefore cannot be deauthorised - only iTunes from the computer are allowed/deauthorised.

  Individual computers can only be deauthorised directly on them.

• iOS 10.0.1 "not allowed to use the restricted network port.

  I just upgraded my iPad Mini iOS 10.0.1. He is now running Safari 10. I tried to visit an internal/private IP on port 4190 using HTTP. I get an error that says:

  Safari cannot open the page.

  The error was: "not allowed to use the restricted network port.

  On iOS 9.3 using Safari 9, the same URL opens fine without this error.

  Do not know what has changed since iOS to iOS 10.0.1, 9.3 but I'm unable to visit a web site that I have visited before.

  I know that WebKit maintains a list of ports that you cannot go (e.g. 6666), 4190 is not a restricted port AFAIK. I don't know why I get this error message.

  It seems I was looking at the wrong source code.

  I finally got a clue where to look after visiting the page Web Safari Technology Preview 13.

  https://trac.WebKit.org/browser/releases/Apple/Safari%20Technology%20Preview%201 3/WebCore/platform/URL.cpp

  It seems port got 4190 recently added to the list of blockedPortList

  2306	2049, / / NFS
  220V	3659, / / apple-sasl / PasswordServer [addition of Apple]
  2308	4045, / / lockd
  2309	4190, / / ManageSieve [Apple adding]
  2310	6000, / / X 11
  2311	6665, / / alternate IRC [addition of Apple]
  2312	6666, / / alternate IRC [addition of Apple]
  2313	6667, / / standard IRC [addition of Apple]
  2314	6668, / / alternate IRC [addition of Apple]
  2315	6669, / / alternate IRC [addition of Apple]
  2316	invalidPortNumber, / / used to block all the invalid port numbers
  2317	};
  2318	const unsigned short * const blockedPortListEnd = blockedPortList + * _ARRAY_LENGTH (blockedPortList);

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• You are not allowed to create or update this content

  I am trying to create a new post, but when I click on 'Post' I get the error message "you are not allowed to create or update this content.

  Is this a bug or is it user error?

  Try again in a little, it's a known bug. Also try to refresh the page or signing in.

• my iphone does not allow me to use, because it asks me to insert aSim card

  I never use Sim Card in my iphoe 4 s and now my iphone does not allow me to use, because it asks me to insert aSim card then what can I do to make my iphone working properly again

  < object edited by host >

  You must use a sims card to set up your phone and continue to make calls. If you just want to use the Wi - Fi you can exit the sims, but you will need initially. Contact your operator for more details.

  Remove or change the SIM card in your iPhone or iPad - Apple Support