Do not sync after updating voice memos

I use a lot, voice memos running iOS 6.1.6 on my iPod Touch 64 GB (4th generation) with no problems until what I have updated iTunes on my iMac (running 10.9.5) to version 12.3.3.17.

Suddenly will not synchronize the voice memos. Clearly, it is because of the update. I did all the usual failover settings, etc., who has been known to go around in the past, but not luck.

Looking at my iPod in iTunes, I can see no synchronized voice memos under on my device > music. They do not appear under on my device > voice Memos. But OTOH, the Album they are in called "Dictaphone".

This is not the first time, suddenly stopped synchronization of voice memos; There are several threads long and without effect on this subject. Usually the problem is resolved with an update, but maybe it's some time to come--or if it's a problem of iOS 6, it can never happen.

So: If anyone knows a workaround for this solution, I would be very grateful. Previous suggestions have included renaming or cut the voice memos, but even if they worked, it is not practical to do this for each voice memo (as I said, I use this app all the time).

You can try cut a few seconds late then sync the voice memo? Make sure that the last seconds are not important.

To adjust the memo, tap on the blue arrow on the right side of the memo, tap "Trim Memo", cut a few seconds, then press 'Trim the voice memo.

I know will say you that is not practical for each voice memo, I just want to see if it works for you, that I may be able to help more.

Tags: iPhone

Similar Questions

  • iPhone does not sync after updating IOS9.2 and iTunes 12.3.2

    My iOS iPhone 6s 9.2 Sync more after that I installed El Capitan on my macbook pro (because the iPhone 6s received the message in iTunes it is not taken in charge more by itunes 12.2 so I had to update) the only thing I get is a rotation beach ball...

    iTunes as such does not work properly, but when I connect one peripheral the spinner is here.

    I already uninstalled iTunes, reeinstalled but still the same issue. (I also tried with my iPad ios9.1 and same problem, so I think it's related to the iTunes 12.3.2 version)

    Anyone who can help me, I'm really nowhere after trying many things already... Thank you!

    I have a similar problem. My ipod touch will not be synchronized since the last update. The music page sometimes seems totally Virgin as if there is no music on the ipod, but shows then at other times. I'm not sure what the link is when I see the music or when the display is clear. What's worse, is that my iTunes on the computer only shows the list of songs, not playlists, so I can't edit or create new lists of reading.

  • TypeKit do not sync with update CC2015

    I have updated to the most recent creative cloud, who came with his questions. The most recent, that I could not find a fix for is TypeKit. I have two fonts I used in previous projects which have now * beside the fonts, and will not be synchronized. If anyone has a resolution of this problem, I would like to know because these are fonts that I use a lot.

    Thank you!

    Fonts:

    Romain Myriad

    MayencePremium

    I managed to solve it - see this thread:

    Broken typekit sync after update cc2015

  • Certain things does not work after update MacOS Sierra on my Macbook Air 13 "Late 2010

    Drag between apps full screen, Mission Control and expose App are not working after update MacOS Sierra on my Macbook Air 13 '' end 2010. The problem because my macbook are not compatible with the current Mac OS or something else?

    Go to System Preferences > Trackpad and turn off and then on the ' shot between apps full screen» It should then work.

  • Ethernet USB adapter does not work after update to sierra mac

    Ethernet USB adapter does not work after update to mac sierra.

    Please solve this problem as soon as POSSIBLE

    Hello guatamshah,

    If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

    The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
    Reset the management system (SCM) controller on your Mac.

    https://support.Apple.com/en-us/HT201295

    How to reset the NVRAM on your Mac.
    https://support.Apple.com/en-us/HT204063

    If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
    OS X: about system information and System Profiler

    https://support.Apple.com/en-us/HT203001

    If she does not appear in the information system, see the articles below.
    macOS Sierra: If a USB device does not work

    https://support.Apple.com/kb/PH25343

    macOS Sierra: check your device's USB connection

    https://support.Apple.com/kb/PH25567

    However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

    macOS Sierra: Add a network service
    https://support.Apple.com/kb/PH25279

    If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

    Kind regards.

  • As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    As some Menu items: Modules, Help Menu and Pocket Extension does not work after update to 17.0

    This may be caused by the Tab Mix Plus extension

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

    You can try to install the latest Dev version of Tab Mix more if you use this extension.

    See the sticky on the forum of Tab Mix Plus:

  • 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

    Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

    In addition, the HID-Compliant touch screen driver is missing.

    Please help me solve this problem, thank you.

    Hi there @BryanHech,

    Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

    How you did update the drivers?

    You use Windows Update?

    Have you checked to see if the driver has been disabled?

    Have you tried to run the Troubleshooter in Windows?

    Have you tried to do a hard reset?

    Have you tried a update the BIOS and graphics driver?

    Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

    Have you tried to Configure the display key?

    Have you tried to activate the driver in touch screen device manager?

    Please follow these steps to see if you can activate the touch screen:

    • Open the Device Manager
    • Find "Human Interface Devices"
    • Expand "Human Interface Devices"
    • Right-click on "touch screen HD compliant."
    • Click 'Activate' (if available)
    • Restart your laptop.

    If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

    To use the system restore in Windows:

    • Go to the Search
    • Type of Control Panel
    • Click on Control Panel
    • Click System
    • Click on the System Protection
    • Click the System Protection tab
    • Click on System Restore
    • Click Next
    • Choose a restore point
    • Click Next
    • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
    • Click Yes to confirm

    When the system restore is complete, you'll be up a pop that says that it has been completed.

    Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

    Thank you!

  • My front camera not working after update to ios 9 (Iphone 5) Please help me to solve this

    Hello

    My front camera of the iphone 5 does not work after update to ios 9, please help?

    I have the same problem on my 5s.  Just after the upgrade to 9.3 camera is black.

    Work, rear camera, but the camera application usually freezes before let me pass.  Sometimes a warning icon yellow appear in enforcement camera, touch, he says the flash does not work for the unit to cool down.  No change after a restore is complete.  Other applications of the camera have the same problem.

    iPhone 5, iOs 9.3

  • Safari does not work after update 9.3 on air iPad and iPhone6Plus

    Safari will not hurt after update 9.3 on the two air 6Plus and iPhone iPad.

    If you mean the links doesn't work does not correctly, Yes, it is a known problem for some with 9.3. Disabling Javascript using Safari, but sacrificing the functionality of javascript on the web browser.

    http://osxdaily.com/2016/03/25/Troubleshooting-iOS-9-3-update-problems/

    If your problem is different, you will need to provide more details.

  • iPad 2 will not activate after update 903

    iPad 2 will not activate after update 903 said only: update completed and just a few steps and you're done displays white screen

    Try resetting your device. This will not erase your data stored on that device.

    • Press and hold the sleep/wake button
    • Press and hold the Home button
    • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

    Take a look at these articles:

    Solve the iOS update and restore error in iTunes - Apple Support

    Get help with iOS update or restore errors - Apple Support

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • iPad will not activate after update to 9.2.1

    iPad does not illuminate after update to 9.2.1 we get the white Apple then disappears and nothing...

    Try a forced reboot. At the same time hold the sleep and home buttons until the Apple logo appears on the screen.

  • autorotation does not work after update 8, 1 wind - W510

    I have a tablet with docking station and 32 GB w510

    the autorotation feature does not work after update to 8.1 windows. the lock button does not work and there is no option for the autorotation lock in the settings.

    I ve installed the latest driver form acer download page and Windows update.

    then I tried a clean install of windows 8 and yet once installed can I 8.1 and it still does not work.

    What can I do?

    PS the camera does not work

    -solution for me! ----

    I don't know what happened, but I'll tell you what I did not last:

    I have the European version of Windows 8.1 N(without Media Feature Pack)

    1. reinstalled microsoft silverlight.
    2. search for update---> silverlight update available!---> installed!
    3. reset
    4. installed the 'Media Feature Pack for N and KN from Windows 8.1 versions"from here: http://www.microsoft.com/en-us/download/details.aspx?id=40744
    5. reset
    6. Search again---> new available updates updates---> installed
    7. reset!

    now, camera, autorotation and all the apps work for me. I hope this will help you

    Best regards

  • Dual booting of Z3 tone does not work after update Marshmallow

    Dual booting of Z3 tone does not work after update Marshmallow? Worked with normal lollipop

    I don't think he has a...

  • Gyro does not work after update 6 Android on z3 D6633 double

    Gyro does not work after update of the marshmallow on Xperia Z3duos D6633

    Issue edited by Rickard

    @dipuvellara

    Could you try to restart in safe mode and test again?

Maybe you are looking for