Do not thread conversations

Similar Questions

• BlackBerry Smartphones sms texts are not 'threaded' more

  My text messages are not threaded more - every single incoming text appears even if it responds to a previous text.  I do not know exactly when this happened, but it's probably in the last week or so.  I have not installed any new apps and tried a hard reboot.  The only thing that I can remember recently is to remove my account gmail and adding a different Gmail (via BIS).

  I have not found any setting in my BB "BOLD" for this and I had no luck looking for an online solution.  Does anyone have any suggestions?

  Look at the Options > SMS text > number of previous items.

  What is your set number to? Set it to '7' and then observe what does what you want.

• All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  All guess why numbered chapters that increment OK in FM11 not after conversion to the FM12?

  I run FrameMaker unstructured 12 and FrameMaker 11 (for use with only the heritage project files) on a Win7 PC. The chapters in my FM11 file book for guide increment a new product user normally in FM11, but something bad, after you save the formatted FM 12 FM 11 project files.
  The book file includes:
  -Product Guide Cover.fm
  -Product GuideTOC.fm
  -Product GuideLOF.fm (list of Figures)
  -Product GuideLOT.fm (list of Tables)
  -Product GuideContent.fm (chapters 1-10) - book files dialing properties: Chapter 1 (digital)
  -Product GuideIX.fm (Index) (Chapter 11) - book files dialing properties: Chapter 2 (digital)
  
  Note: The chapter headings (e.g. 1 - Introduction, 2 - Specifications and so on) in the product GuideContent.fm and GuideIX.fm files are in the format paragraph Designer like: (the Auto-Numbering Format enabled) H: < n + > \t
  However, when I update the book, the Index seems formatted as Chapter 1 instead of Chapter 11. It seems that the conversion to FM 12 messed autodial in the product file GuideIX.fm, so that the only way to increment the value would be to manually update the building blocks in the file to H: IX.fm \t H: < n + > < n = 11 > \t (which I do not). Any suggestions would be greatly appreciated!

  Thank you - Randall basin

  Hi Ran,

  It's for anyone finding the subject, given that you and I come to chat with a screen sharing...

  After watching your files, the "chapter number" are really only section numbers, with all 10 of them in the same file FM. That means that really impossible to use the <$chapnum>for many of them and the index.

  In most cases, you would be still able to use the Fm 5.0 manually counting technique paragraphs title with an indicator of the series and the counter (e.g. H:), but you also have a number of positions within blocks of text not included in the stream.

  This seems to be your address update index position correctly.

  So, the only way to get the appropriate index number is to control it manually. You have at least 3 choices:

  1. Enter it manually
  2. Manually enter the AutoNumber box for the index
  3. Enter it manually in the numbering section of the dialing properties tab.

  However, all these things are extra bandages on top of your existing bandages, and I prefer to see the problems resolved instead of the 3 'Hacks' I have provided.

  For the sake of closure, please check the question if this seems to be specific for you.

  Sorry for the bad news (ish)!

  -Matt

• Block of text not threaded connection to the linked text frames

  Can someone please help with a script js (for ID 5.5) that connects a textframe not threaded to those threaded. I tried

  myTextFrameA.nextTextFrame = myTextFrameB;

  He messes things as soon as I learned to link more than once, of course, I have to (I need a script otherwise?).

  Thanks for your help.

  Oops - I did not try before posting. The idea was to force the script to stop when you have selected something else, and in general a 'return' is sufficient.

  Change the 'back' in 'exit (0)' he'll grind to stop as required.

• SimpleParser consistency class is not thread-safe?

  Coherense has the utility class to XML very convinent which we use it a lot in our coherence-related applications.
  
  But meet us some lock mysterious question (dead end, maybe?) and have identified that it would be that the com.tangosol.run.xml.SimpleParser class is not thread-safe.
  
  We use tomcat 6 and Spring 2.0.6.
  
  Application Web has 2 bean that implements the InitializingBean interface.
  
  Bean A afterPropertiesSet() method will use com.tangosol.run.xml.XmlHelper.loadXml method to parse a XML file.
  Method of Bean B afterPropertiesSet() will acts as a tcp expand clients and retrieve data from a cluster of coherence. Which, I think, consistency will also use XML class useful during parsing of the configuration files.
  
  We meet randomly blocking of tomcat (which never end starting webapp deployment alternation) as 1 on 2 or 3 tests.
  
  Use of jconsole and tomcat connection we can see that the main thread stuck in the class SimpleParser. Here's the thread dump.
  
  Name: main
  State: EXECUTABLE
  Blocked in total: 156 Total expected: 0
  
  *************************************************************************************************
  
  Stack trace:
  com.tangosol.run.xml.SimpleParser.instantiateDocument(SimpleParser.java:150)
  com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:115)
  -locking com.tangosol.run.xml.SimpleParser@f10c77
  com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:71)
  com.tangosol.run.xml.SimpleParser.parseXml(SimpleParser.java:84)
  com.tangosol.run.xml.XmlHelper.loadXml(XmlHelper.java:109)
  org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1201)
  org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1171)
  org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:425)
  org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:251)
  org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:156)
  -locking java.util.concurrent.ConcurrentHashMap@dee55c
  org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:248)
  org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:160)
  org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:287)
  org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:352)
  -locking java.lang.Object@d21555
  org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:244)
  org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:187)
  org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:49)
  org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3830)
  org.apache.catalina.core.StandardContext.start(StandardContext.java:4337)
  -locking org.apache.catalina.core.StandardContext@1c64ed8
  org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:791)
  -locking java.util.HashMap@76a6d9
  org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:771)
  org.apache.catalina.core.StandardHost.addChild(StandardHost.java:525)
  org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:825)
  org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:714)
  org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:490)
  org.apache.catalina.startup.HostConfig.start(HostConfig.java:1138)
  org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
  org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:117)
  org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1053)
  -locking org.apache.catalina.core.StandardHost@1c42c4b
  org.apache.catalina.core.StandardHost.start(StandardHost.java:719)
  -locking org.apache.catalina.core.StandardHost@1c42c4b
  org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045)
  -locking org.apache.catalina.core.StandardEngine@37fd24
  org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
  org.apache.catalina.core.StandardService.start(StandardService.java:516)
  -locking org.apache.catalina.core.StandardEngine@37fd24
  org.apache.catalina.core.StandardServer.start(StandardServer.java:710)
  -locked [Lorg.apache.catalina.Service;@1cc55fb
  org.apache.catalina.startup.Catalina.start(Catalina.java:566)
  sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  java.lang.reflect.Method.invoke (unknown Source)
  org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:288)
  org.apache.catalina.startup.Bootstrap.main (Bootstrap.java:413)
  
  *************************************************************************************************
  
  After we have add the tag is based on applying bean B wait on A bean to complete initialization, we encounter is no longer blocked when starting tomcat.
  
  We suspect that maybe SimpleParser class is not thread-safe and will cause potential deadlock issue.
  
  Published by: user639604 on June 22, 2009 10:36

  It seems that the 'hand' thread comes to the point that he is responsible for the class of SimpleDocument around the same time as the thread "Timer-0"comes to the point where he is in charge of the class ExternalizableHelper. According to what son get on-demand, if the loading of the class ExternalizableHelper happens point of needing to SimpleDocument after the main thread starts to load SimpleDocument, then a deadlock (inside the JVM loading infrastructure class) happen.

  While you are correct that it is our fault (we shouldn't have used a subset of the ExternalizableHelper static initializer), there is probably a simple solution; Just do the following in an initializer static for your first loads or the classes related to the coherence, for example ClusterConfigurator and OPCacheManager:

  static
    {
    // this should force the ExternalizableHelper class to be loaded
    ExternalizableHelper.makeTrint(0L);
    }
  

  Peace,

  Cameron Purdy | The Oracle coherence

• Why my emails are threaded even though my tri is set to not threaded?

  My view > sort by > is Unthreaded, yet when I mark an email as "Read" it marks randomly as other messages to read that I have not really read yet. No, I don't have the addons for the filtering of conversations. Yes, I've read this Q & A https://support.mozilla.org/en-US/questions/989629?esab=a & as = aaq response which says that even if the right click list drop-down Mark > as read option shows the 'R' stressed to use 'R' to mark a message as read, 'R' will mark the entire thread as read. My question is, how can he score 'a thread"Red when a thread does not exist since sorting by vision is defined as non-threaded? I am grateful for the suggestion to use'm ' to switch between read and unread on a single message, status because it does not have to mark a single message as read! However, in every other sense messages are always treated as they pass even if I put the view > sort by > as Unthreaded. Is there ANY other way to disable thread outside the view > sort by options? Or at least change the way Thunderbird put together topics of conversation?

  See here http://kb.mozillazine.org/Stop_threading_by_subject
  and https://wiki.mozilla.org/MailNews:Message_Threading

  I think that should cover the basics as well as some details.

  When an email is created a reference is given by its creator, that that Thunderbird, Gmail or Outlook. This reference is supposed to be unique in the world, or nearby value. Most of the things nowadays use GUIDS but mail really precedes this concept, so old messages requires only a reference. Gmail has put references that look like this in my mail

  Message-ID: < [email protected] >
  

  It is this reference which is the base of the thread. Who and when I click to answer or forward, another header is added

  References: <[email protected]> <[email protected]>
  

  In this example, there are two previous E-mail listed in the references.

  When Thunderbird Threads of this mail, it takes three values and looking in the mailbox for other messages with these three entries, because they a related danger one is the message that was sent and the following two are responded and returned again to the answers.

  Now, we get to the really unfortunate part of the process. Most web developers know squat about electronic mail; The same can be said of more general developers, but they continue to get the specifications for programs send a mail and they do horribly wrong. Often they copy a bit badly written JavaScript and paste it into a web page and the e-mail box. Worse still is the weekend hacker who develops a nice web page for the butcher, hairdresser (fill in business here) and copies all sorts of poorly written but functional JavaScript into the pot.

  So exactly why these emails would be strung, I don't know, because the subject is a very minor factor. You can enlighten us by looking at references and Message-id headers.

  You have installed add-ons?

• BlackBerry Smartphones voice note file conversion

  I'm on Windows XP.  On the Pearl, a voice note file that is created is a .amr file.  I can create a more standard file as a .wav or what software is recommended for the conversion of my XP machine does not recognize a .amr file?  Thank you.

  Hi and welcome to the forums!

  It would be easier to get Quicktime for your XP to change the file type of the Blackberry.

  QuickTime can play .amr files.

  Thank you

  Bifocals

• CS6 renfilez / reconnection story that I have not threaded - reference problem

  This started as a reference problem. My notes are not always numbered consecutively. I searched the forum and found many complaints about the notes. I think that my problem is that the CS6 begins renumbering of notes if it detects a new "history". I voluntarily started my chapter 28 pages with a full story. However, somewhere along the line, the thread of the story broke. I did a lot of formatting with graphics and images before noticing the notes were again starting with the number 1. I want to join the pieces of the story. How can I do?

  
  

  Marsha using Mac Yosemite
  

  I found the answer after looking everywhere for it!

  Nigel French lesson illustrates and explains how to join two text blocks Threading text InDesign CC EPUB typography | Lynda.com

  OPTION-click on (or ALT-click) the outport of the last frame of the first story then click on as part of the second image to join into one.

• Format not opening not DNG conversions

  I dusted off an old Toshiba laptop that has a copy of Photoshop CS4 and the newest software Conversion to DNG (v8.8). Made a record of RAW files (Olympus ORF), diverted, open to ACR and saved the files that are currently .dng files in Bridge the DNG... but CS4 doesn't open, says it does not support this file type. How Adobe Photoshop cannot open an Adobe type file? I thought DNG made backwards compatible all the RAW in Photoshop files dating back to the night time. Any ideas, suggestions, solutions?

  Well, you man. Or the woman because "R" could be Robert or Roberta, but in both cases, you have solved my problem that has been hanging around for a few years. ACR plugin has been installed in the correct folder PS4. Moved, corrected a problem, all right, and I thank very you much.

• messages text appears not the conversation list.

  I was remove some older posts today and since then when I get them I have to search the name of the contact to find the message. Before, I had not deleted all text messages would remain in the main list of conversation. Now he comes and tells me that my list is empty. Is this a bug or something I did accidentally?

  New update just released 1.3.5 should correct this problem. Since the release notes

  Messaging

  • If a user deletes a conversation with a contact, new conversations with this contact now display correctly in the Conversations view.

• Create thread (conversation) in the folder "SMS and MMS.

  Should what RIM API I use to do?

  Thank you.

  You can not.
  the API is very limited when it comes to sms, you can listen to send/receive or send them yourself, that's about it.

• Network-device does not not after conversion

  Hi guys,.

  I just felt a little more with the new VMWare vCenter Converter and tried to convert a systemsnapshot taken by Acronis True Image Home 11.

  So far so good, everything worked except one: the virtual machine network device. After you start the VM theres not bridged or NAT connection available at all.

  Anyone know an issue on this kind of problem?

  Thank you from the outset,

  ALEKS

  What you might try is to put the default, virtual NETWORK card, which is used when you create a new virtual machine.

  Replace

  ethernet0.virtualDev = "vlance.

  by

  ethernet0.virtualDev = "e1000".

  Make sure that the virtual machine is not in use when you edit the vmx file. If this does not work as expected, take a look at the vmware.log to check if the change has been recognized.

  André

• How to make my tables not threadding to a new page up to filling the page that I am?

  

  After the 1st row, 2nd row supposed to be on the bottom of the 1st page... but it is happen otherwise it's keep threadding to a new page... This is also happening to the 3rd row... Anyone here know how to fix it...? I use already 5 hours just to solve this prob, but nothing happens... x_X

  Hello h,

  It's the way you have structured the table.

  The first column is merged for a number of lines, making it a very "high" line ID split the line automatically...

  / G

• I'm getting threadts and subthreats and I want to see my email not with these threads, but in separte email

  I GET THREADS AND THREADS UNDER AND I DON'T ' WANT TO GET THIS WAY, I DON'T KNOW WHY WHO IS PAST, I WANT TO SEE NORMAL TO MY EMAIL RESPONSES NOT THREADS, BUT BY AN EMAIL SEPARATELY. I LOOK AT ALL THE ALL FUNCITONS AND CAN NOT FIND HOW TO GET BACK WITHOUT NORMAL.

  You must disable Threading.

  Try this:
  View > sort by > non threaded

• Thread text does not

  I have two InDesign CS5 (7.0.4) and CS6 (8.0.1) running on a MacPro1, 1 with Mac OS 10.6.8

  I am unable to connect the two wires to separate text. If I use the in or out ports and thread empty text box not threaded, everything is fine, but as soon as I try to link any two boxes that have text in them, a new text box is created and existing text son to that rather than put on the two text boxes. In a related vein, if I try to separate the two threaded boxes by double-clicking on either the input or output port between them, I get rather a new text box threaded to the port that I double-clicked. I can auto-flux a new document text with all the pages of threads. I don't know what is happening, but a large part of my work being page-layout book, it is a big problem for me. Any who see this before and you have all the solutions? It comes from occurring in both versions of above mentioned ID.

  Any who see this before and you have all the solutions? It comes from occurring in both versions of above mentioned ID.

  I see something like that all the time, actually.

  I do not know what types of layouts, you are working on, so I can't be sure that what you describe is what I feel 100%. One thing that I see regularly, is that if the text box that I am trying to connect is not at the top of the order of the stack for this layer, it is extremely difficult to thread. However, if I use a tool like text of Rorohiko point (it's free, very useful, check it out if you need to pass a large number of images) it is easier to connect a block of text, if it's buried in the stack.

  I often wear frames in reverse order of the port au port out of the previous framework logically-this seems to make it easier, more than half of the time.

  What the pointer turns to when you don't thread frames? Sometimes it will show the loaded gun to place, and it will turn into a weapon to fire 'chained' place (watch the gun of the place with a string instead of the filled-up-with-text icon) which indicates that you are going to link to an image. I'll try to take some screenshots later but my screenshot on this machine tool fails to capture the pointer.