Do not use under water

Similar Questions

• The listener should be closed before it can be used under water?

  For all I know, Xperia Z3 can be used while under water, all ports should be closed firmly. Is it includes the headphone jack? Because I didn't have the plug during the purchase. Or I have to buy the CAP separately?

  No, the headset jack his raincoat to the water

• Sony Cam AS15 Action does not focus under water. How can I improve underwater video quality?

  The AS15 provides a very good quality video over water, but as soon as it is lowered underwater, it is not focused. The video quality is very bad, the images are totally blurred. It seems that it does not focus properly.

  How can we improve quality?

  
  

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• I bought a used under Windows XP SP2 desktop computer. I need to upgrade to SP3 to run MS Office Home and Student 2010. I was not able to be upgraded. Help!

  I bought a used under Windows XP SP2 desktop computer.  I need to upgrade to SP3 to run MS Office Home and Student 2010.  I was not able to be upgraded.  Help!

  If I where to install SP3 I would choose to download the
  file and don't use automatic updates.

  Where to download the SP3 Setup file:
  (The file is large but only installs the components required by your PC)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5b33b5a8-5e76-401F-BE08-1e1555d4f3d4&displaylang=en
  OR http://www.microsoft.com/en-us/download/details.aspx?id=24

  How to obtain the latest Windows XP (support CD or download) service pack
  http://support.Microsoft.com/kb/322389

  Your computer must be at least level SP1 or SP2 SP3 will not be
  install on XP Gold.

  I would also create a "save image" of my front disc
  to install SP3 just in case you have problems.
  Not having any Image backup software:
  Try the 'True Image' (has a 15 day trial version available)
  http://www.Acronis.com/homecomputing/products/TrueImage/

  If you use a third-party firewall brand, of course, it is up to date (latest version)

  Install SP3 in mode "clean boot":
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Overview of Windows XP Service Pack 3
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=68c48dad-BC34-40be-8d85-6bb4f56f5110&displaylang=en
  Don't forget to download and read the file titled "overview of Windows XP Service Pack 3"
  Note: "you can run the package of SP3 update on any edition of Windows XP SP1 or SP2."

  The space of hard disk required for Windows XP Service Pack 3
  Describes the space of hard drive required for installation
  Windows XP Service Pack 3 (SP3)
  "For a PC on which Windows XP is already installed"
  http://support.Microsoft.com/kb/947311/en-us

  Install Windows XP Service Pack 3 (SP3)
  http://TechNet.Microsoft.com/en-us/Windows/cc164204.aspx

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929/en-us

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480/
   
  Steps to take before you install Windows XP Service Pack 3
  Recommend the steps to take before you install Windows XP Service Pack 3.
  Also includes troubleshooting information.
  http://support.Microsoft.com/kb/950717/en-us

  J W Stuart: http://www.pagestart.com

• I just bought a new Mac and migrated my CS6 on.  Now, when I open it, I said that I am under a trial of the cloud.  Why can I not use my CS6 version that I bought?  I don't want to pay for something I already bought.

  I just bought a new Mac and migrated my CS6 on.  Now, when I open it, I said that I am under a trial of the cloud.  Why can I not use my CS6 version that I bought?  I don't want to pay for something I already bought.

  Here's how to convert the Permanent Trail:

  By receiving the expired Trial/test screen

  Make sure you are online

  Click on software under license

  The perpetual owners: connect with the adobe ID and enter the serial number of the product

  Product must be certified with success

• View does not use index Mview underlying but mview uses indexes

  Hello

  I faced a situation where, while querying data to display based on mview does not use the index, but when we wonder of mview it uses index and produce quick results.

  Here are the details:

  
  querying from view: (completes in more than a minute even after passing hint)
  ================================
  explain plan for select /*+ index(  ITGI_CREDITOR_LEDGER_CMV ITGI_CREDITOR_LEDGER_INDX) */ * from CR_LEDGER_REP_V where vendor_id='1474911';
  
  Plan hash value: 463951623
  
  ---------------------------------------------------------------------------------------------------
  | Id  | Operation              | Name                     | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT       |                          |  9056K|  5648M| 97644   (1)| 00:00:04 |
  |*  1 |  VIEW                  | CR_LEDGER_REP_V          |  9056K|  5648M| 97644   (1)| 00:00:04 |
  |   2 |   COUNT                |                          |       |       |            |          |
  |   3 |    MAT_VIEW ACCESS FULL| ITGI_CREDITOR_LEDGER_CMV |  9056K|  2159M| 97644   (1)| 00:00:04 |
  ---------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     1 - filter("VENDOR_ID"=1474911)
  
  
  
  Querying from mview: (completes within a second)
  ==============================
  
  explain plan for select /*+ index(  ITGI_CREDITOR_LEDGER_CMV ITGI_CREDITOR_LEDGER_INDX) */ * from ITGI_CREDITOR_LEDGER_CMV where vendor_id='1474911';
  
  
  Plan hash value: 1726512073
  
  --------------------------------------------------------------------------------------------------------------------
  | Id  | Operation                              | Name                      | Rows  | Bytes | Cost (%CPU)| Time     |
  --------------------------------------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT                       |                           |    21 |  5880 |    21   (0)| 00:00:01 |
  |   1 |  MAT_VIEW ACCESS BY INDEX ROWID BATCHED| ITGI_CREDITOR_LEDGER_CMV  |    21 |  5880 |    21   (0)| 00:00:01 |
  |*  2 |   INDEX RANGE SCAN                     | ITGI_CREDITOR_LEDGER_INDX |    22 |       |     3   (0)| 00:00:01 |
  --------------------------------------------------------------------------------------------------------------------
  
  Predicate Information (identified by operation id):
  ---------------------------------------------------
  
     2 - access("VENDOR_ID"=1474911)
  
  
  
  View DDL
  ========================
  
  CREATE OR REPLACE FORCE VIEW SANJAY.CR_LEDGER_REP_V
  (
     QRY,
     SR_NO,
     VENDOR_ID,
     VENDOR_TYPE,
     VENDOR_NUMBER,
     VENDOR_NAME,
     VENDOR_SITE_ID,
     VENDOR_SITE_CODE,
     GL_DATE,
     ACCOUNTING_DATE,
     PO,
     INVOICE_TYPE,
     AP_INVOICE_NO,
     INVOICE_DOC_CAT,
     AP_INVOICE_DATE,
     INVOICE_VOUCHER_NO,
     PAYMENT_VOUCHER_NO,
     CHQ_NO,
     DESCRIPTION,
     PAYMENT_DATE,
     ACC_CODE,
     PAYMENT_METHOD,
     CURR_CODE,
     DEBIT,
     CREDIT
  )
  AS
     SELECT qry,
            ROWNUM srn,
            vendor_id,
            vendor_type_lookup_code,
            vendor_no,
            vendor_name,
            vendor_site_id,
            vendor_site_code,
            gl_date,
            accounting_date,
            po_distribution_id,
            invoice_type_lookup_code,
            invoice_num,
            doc_category_code,
            invoice_date,
            inv_voucher_num,
            payment_num,
            check_number,
            description,
            pay_accounting_date,
            account_code,
            payment_method_code,
            invoice_currency_code,
            debit,
            credit
       FROM sanjay.itgi_creditor_ledger_cmv;
  
  
  
  

  The plan does not change even if I do not use advice.

  Although I said developer to use mview directly, but I did not understand this behavior.

  DB version: 12.1

  OPERATING SYSTEM: AIX 6.1

  Kind regards

  Gerard

  Note that the query on the view plan is only to apply your filter predicates on line 1, rather than against the mview in line 3. Line 2 said you that enforcement must correspond to a kind of County before it can filter which is due to the virtual rownum in your point of view.

  You need this column? In my opinion, it's meaningless. Remove the column from the view would mean that the view doesn't have to be assessed in its entirety (if not, how it will calculate rownums?) before allowing you to filter. You asked the developer to implement the work is likely to come with a different value of sr_no (if the developer is even using it?) than what he would have obtained by using the view.

  The column tries to catch a unique key for the view? Are you aware that rownum values can and will change between requests to the same table as the order lines are selected is not guaranteed. If the column is actually useful (and it is correct to calculate at this level) you then could it sense it is calculated inside the mview? This means that you can only refresh the mview completely and rownum values can (and will) only change on refresh.

• Iomega Portable hard drive now does not appear under "Devices" after accidentally deleted USB cable. USB

  My Iomega eGo Portable hard drive was connected by USB on my Macbook Pro OSX 10.9.5 cable and I was transferring my iPhoto folder.  Unfortunately, the cable dropped and I got a message on my laptop hard drive had not ejected correctly.   I reconnected it the cable, but now, it does not appear under devices in the search page.  I also checked the disc utilities and it isn't here either.  I tried to connect the hard drive of my iMac, but it does not appear in the devices out there either.

  Although I have been using a Mac since they first appeared on the market and can usually work things, I find it more and more difficult with all the new technology.  Everything that used to be so easy, one of the great things the Mac since MS-DOS.

  If anyone can help I would be very grateful, because I have a lot of files on this disc of old Mac and use the Iomega to backup my most important files.

  The drive may have failed.

  Try different USB cables.

  Remove the naked drive from the iOmega enclosure and test it in a known functional wardrobe.

  Ciao.

• By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

  To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

  Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

• Drive external hard drive does not appear under "devices."

  Hello

  I just updated my OS to Sierra of MacOS. I have connected my external hard drive (HDD) and it does not appear under "Devices" in my Finder window. It worked fine before the update.

  I use a MacBook Pro (end of 2013), currently running MacOS Sierra (Version 10.12). My external HARD drive is a SeaGate Slim SL Media (500 GB).

  The external HARD disk appears in disk utility application. He also appears on the about this Mac > system report > USB. I don't know what the problem is, the external HARD disk is identified but does not appear for use in the Finder window.

  I read that it could possibly be in mode 'sleep' and putting the MacBook to sleep (while it is plugged into the external HARD drive) and it to wake up again should solve the problem. However, it did not work. No more restarting my MacBook. It was mentioned in another post that it may require extra power, so I attached power adapter and again, without success.

  I do not want to clear the contents of the external HARD drive.

  Is there a way to get my external HARD drive works as expected with my MacBook?

  Thank you much in advance.

  I also have this problem.

  My camera is Macbook Pro 13 "retina 2015 and Seagate Backup more 1 TB (NTFS - Paragon NTFS)

  * Edit *.

  

  My HDD show in report system > hardware > USB

  but it does not show in Finder or Desktop.

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• With the new updated my headphones stop working and I have to reboot to get back them on. Speakers continue to work. Looks like a fax under water.

  After downloading the new update, my helmet randomly began to lose the sound and I get this sounds like a fax under water machine and I do not have what I was listening to. I have to shut down my computer to do return normally, only to have to chance to do it again. The computer stops you can hear a popping sound. I went back to an earlier backup and have not installed the update for a day and it was working very well again. Then I installed the update again and a few hours that has started to happen again. I went back to the previous record and have not installed the update for the last 3 days and no problem. I would like to be able to install the update but not if it means losing her and having to close. I watch TV on my computer and it of a huge pain to get a film loaded only to stop because I can't hear it, then reload and maybe 20 minutes. or an hour later same thing. And it seems to be quite random when it happens.

  Hi carmenoshea,

  Thank you to contact our support, I'm sorry to hear that he had a problem with the audio after the recent update of version 27. Difficulty common audio and video questions

  I found an old bug with similar issues, but it is not the current version. For more information, what kind of video/audio you play when this happens?

  Please make sure that when you update all the plug ins are updated as well.

  • VLChttp://www.videolan.org/
  • Real Playerhttp://www.ehow.com/about_5558328_firefox-real-player-pr...

• Why the first Firefox page tell me that I do not use the latest version when the "about" in the menu help says I?

  I updated Firefox 2 days after seeing the message that I was not using the latest version. Download and install led and everything seems to work normally except that I still have a message on my Firefox home page telling me that I'm not using the latest version. If, on the other hand, I navigate to 'Firefox' - 'help' - "On Firefox" I tells me that I'm running Firefox 8.0.1 and "Firefox is updated.

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained. You seem to have Firefox installed with the latest version 8.0.1.

  If you want to than the Google search page as homepage, change your homepage to Subject: House (a new update version is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin

  * Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox

  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• None of my extensions will update and do not appear under Tools. What's wrong?

  I use Windows 7 and the latest version of Firefox 3.6. None of my extensions will update and do not appear under Tools. I use Firefox for years without any problem. How can I access my extensions and how to update?

  Remove files (extensions.rdf, extensions.cache, extensions.ini) extensions.* and compatibility.ini in the Firefox profile folder to reset the extensions registry.
  
  See "extension corrupted files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
  
  If you see disabled extensions are not compatible on the next departure in "tools > Modules > Extensions" and then click "Find updates" to do a compatibility check.

• Satellite A500-148 not listed under assistance produces

  Hello

  I'm looking for software updates (bios update specifically) for my Toshiba Satellite A500-128, but it is not listed under product support.
  How can I find for this model?

  Thank you.

  Hello

  I found the Toshiba Satellite A500-148 using google.
  The full model number seems to be: * PSAM3E-02M00DEP *.
  I gogoled and found on the Toshiba page Portugal looks like a brand new model of laptop and so there is not a lot of details about it but I think that it of just a matter of time and you will find info mode

  Hope I could help you...