Do now HP PSUS use very thin traffic?
Hello.
I just bought a HP Pavilion P7-1534 once an older Pavilion Elite had a motherboard failure.
The elite has a 550W PSU in order to support a 2 GB graphics card. I wanted to move these upgrades to this new machine, but when it came time to plug in the power supply I couldn't help noticing that the caps did not differ on the new computer. They seem slightly thinner, more particularly on the card to enter the hard, the power supply 550W with some thick plastic where the power supply provided with the P7 had almost none. No plug is able to fully integrate the plugs from the motherboard, although for obvious reasons, I didn't force.
Should I buy a special type of PSU?
Hello
The range of HP from PC consumers use a standard ATX power supply. If you want to replace, then consider the Corsair CX500 , or CX600.
If your PC comes with Windows 8, then you might have other changes to make the hardware installation. See the articles below.
HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card
Unless the hard drive from the old PC SATA, I would say that acquire you a box external USB box and use the disk for the auxiliary storage.
Tags: HP Desktops
Similar Questions
-
After Reinstalling windows 7, Thunderbird (now 38.2) runs very slowly
As a result of a relocation complete Windows 7 and Thunderbird (now 38.2) runs very slowly, except for Mode without failure.
Hardware acceleration disabled by defining gfx.direct2d.disabled true and true layers.acceleration.disabled using the configuration editor has not helped. Or upgrade to the latest display driver (Nvidea GeForce 8500 GT 9.18.13.4181 17 August 2015))
I have very few messages in the Thunderbird folder.
I run Avast a / v.
Is it possible to run in permanent safe mode?
Thank you in anticipation
Simonides
Solved... Although I thought I had no addons, I got Cloudmark need the update and now it works well.
Detective Conan!
S
-
Hello
I use Acrobat Reader DC 10 Windows.
The first Menuline; File... is anyone Menufont in Windows 10: but the Menupoints pursuant to them, as an example, close, save, save as, are in a very thin font.
I have trouble seeing this thin fonts and have the normally Windows 10 Menufont.
How can I change the thin Menufont in the Menufont normally?
Thanks for your help!
Martin Jenniges
I'm sorry because it is not possible to change the weight of the font in the drop-down Menu bar options.
It is a designed behavior.
Kind regards
Meenakshi
-
I just upgraded my iPad iOS 9.2 and now can't use my Logitech keyboard. What should I do?
I suggest that contact you Logitech to see if they have a update/work around.
Barry
-
How do I change my date of birth in the profile because I mistakenly put 2011 instead of 1970 and now I can use the e-mail due to parental control?
Hello
The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
-
My product key on a new installation was invalid so then I activated by phone... now when I use windows update it is not working properly because it says that I don't have a genuine copy of windows... But it seems that the updates don't come down... is it ok to work this way?
To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
Once saved, run the tool.
Click on the button continue, which will produce the report.
To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
Windows security updates will continue to come down the pipe under automatic updates, but you cannot access the General updates until the system to validate. -
I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs. How can I change them back? I use Vista and have little knowledge of computers but I can follow directions. Thank you
I open a file with photoshop and all my files are now trying to use photo shop to open them including some programs. How can I change them back? I use Vista and have little knowledge of computers but I can follow directions. Thank you
Try this simple tutorial. No guarantees.
Restore the file type associations:
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.htmlScroll down to exe - executable application files.
Click on the exeFollow the instructions in #1 à #7 at the top.
Scroll to lnk - shortcut link (LNK) files.
Click on lnkFollow the instructions in #1 à #7 at the top.
-
My lap top is a window vista premium 6.0 sp2. so, as I believe that in July 2010 my connection email expired with the sp2 from window to the server with http hotmail .com I was trying out an important e-mail to a certain Department of the army and he was ejected back because of my direct window a stopover for hotmail http sites. So, what's my next step? This laptop that I use now for academic use belonging to my mother. I was'nt sure of what to click on in the troubleshooting list. Thks.
Are what the hell you referring in Windows 8?
Submit all Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
I need manage the bandwidth used, PowerConnect 6224 traffic collision and packet traffic. I downloaded the MIB from the Dell support site and I saw thar there are about 105 MIB in the downloaded file. My question is: in what Mib, I can find the OID which allow me to monitor the above?
Thanks in advance
Rogerio
Unfortunately, there is not a complete list of the different OID in different MIB. In order to find this info to simply browse through the different MIB seeking the OID, you need. We did some looking through the MIB and found these OIDs that can help you. Another thing to keep in mind is that the MIB downloaded are in general of a group of switches. So there are situations where a /OID MIB listed will work for a certain model of switch with certain level of firmware.
RMON-MIB
FastPath-cos-qos-mib
Another method, some people have had success, done using a SNMP walk.
http://www.snmpsoft.com/freetools/snmpwalk.html
I hope this information helps. The method of importation for these MIBs can change based on the management/tracking software that you use.
Thank you
-
now, I'm using windows 7 Home Basic but in my google chrome and firefox does not please give me suggestion?
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
-
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
-
Moderator Forum Keith has a few suggestions along this line to
-
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
-
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
-
Finally if all else fails, you can look at the rather cryptic system event log. To do that click on start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
`
When you get your system in good working condition, I invite you to back up your system up to an external hard drive and make it regular periodic updates.
-
I hope this helps. Good luck.
-
My acrobat 8 is recorded for a computer that has been hacked and is fried, but I can't reg to this computer and now I cannot use it for 30 days on this computer
Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations
-
I bought around ten year 7 Photoshop and Indesign etc and now I'm using only Photoshop 7. Three months ago I installed Windows 10 and now the ad once I can't use my Photoshop 7 more. Should wat I do?
The oldest is compared to newer operating systems, it is less likely to work. If you have been happy with the help of Photoshop 7 then you should be happy with the old operating system as well. Your options are either to return to a system that supports your software or to buy new software to go with the new system. CS6 products are still selling as far as I know. In addition, your only option is to subscribe to the cloud of Creative for Photoshop CC.
-
How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of change the color, I chose.
Three things I can think of:
Your document must be in RGB mode.
Layer blending mode should be set to Normal
Masks are grayscale. If you select the mask, you cannot apply a color.
Always check your tab at the top to see if what you choose is RGB or grayscale.
Gene
-
I have an old mac adobe creative suite 3 design premium I now want to use it on my windows
I have an old mac adobe creative suite 3 design premium I now want to use it on my computer windows 7, do I have to buy a separate, even if I can't use my suite mac adobe creative?
Forget your CS3. The platform swaps apply only to the current versions. You need to buy a completely fresh CS6 licnese or sign up for creative cloud.
Mylenium
-
Hey there, Ive been using CS6 AI years and use very confident on that, however, Ive just started using CS6 iD can someone advise me why the interface and the text is grainy compered to AI happy to send screenshots of the show, cheers, Nicholas.
Question 1: txt is not grainy all Crystal sharp like
2nd edition: txt look just poor compared with the have
CS6 Illustrator and Photoshop CS6 have been updated to support the Retina (HD) screens. InDesign totally needs a rewrite that took several years of programmer time. CS6 cannot be updated for screens high definition. You use InDesign CC for this support. Just like that.
Maybe you are looking for
-
HP probook 450 g2: contest coverage
How to challenge my warranty. the option is not available when I search the product using the serial number, please confirm with the help of the direct link.
-
Bug to escape text with Microsoft Fax Server TSID/CSID
I found a bug where an ampersand is escaped in one place but not in another place, so it is displayed inconsistently. To reproduce: (1) in the Microsoft Fax Service Manager, go to the devices and suppliers > devices > [device] > properties > general
-
I just downloaded this twice, tried validating the Cahce / Defraging he... Nothing has worked so far.
-
My cd/dvd drive does not read
I think it's a Hitachi ATA devivce, but only appears in the disk drives under Device Manager. There is no real reference to CD/DVD-Rom it. I tried the suggestions I have read, including going into the registry and delete upper and lower filters. Even
-
Hi all I have two areas of labels of the gains of land vefticalfield first manager.when label focus wil change to yellow color of his text. Along with this, I need second label field to change its color... That is to say, when the first label field g