Very thin MenuFont

Similar Questions

• Do now HP PSUS use very thin traffic?

  Hello.

  I just bought a HP Pavilion P7-1534 once an older Pavilion Elite had a motherboard failure.

  The elite has a 550W PSU in order to support a 2 GB graphics card.  I wanted to move these upgrades to this new machine, but when it came time to plug in the power supply I couldn't help noticing that the caps did not differ on the new computer.  They seem slightly thinner, more particularly on the card to enter the hard, the power supply 550W with some thick plastic where the power supply provided with the P7 had almost none.  No plug is able to fully integrate the plugs from the motherboard, although for obvious reasons, I didn't force.

  Should I buy a special type of PSU?

  Hello

  The range of HP from PC consumers use a standard ATX power supply. If you want to replace, then consider the Corsair CX500 , or CX600.

  If your PC comes with Windows 8, then you might have other changes to make the hardware installation.  See the articles below.

  HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card   

  Unless the hard drive from the old PC SATA, I would say that acquire you a box external USB box and use the disk for the auxiliary storage.

• Exhibitor has pointed out very thin

  I have a lot of Indesign files, and I need to change the underlined words ranging from 0.1 to 0.4 pt. It is possibble through by script?

  I remember not where I found this script, a lot of time in some forum...

  It works well for my line of work...

      function main(){
      function resetOpt() {
        var old_fCGOpts = app.findChangeGrepOptions.properties;
        var old_fGPref = app.findGrepPreferences.properties;
        var old_cGPref = app.changeGrepPreferences.properties;
  
        app.findChangeGrepOptions = NothingEnum.NOTHING;
        app.findGrepPreferences = NothingEnum.NOTHING;
        app.changeGrepPreferences = NothingEnum.NOTHING;
        return [old_fCGOpts, old_fGPref, old_cGPref]
      }
  
      function restoreOpt(myOpt) {
        app.findChangeGrepOptions.properties = myOpt[0];
        app.findGrepPreferences.properties = myOpt[1];
        app.changeGrepPreferences.properties = myOpt[2];
      }
          var myOpt=resetOpt ();
          app.findGrepPreferences.underline=true;
          var myRes=app.activeDocument.findGrep(), l=myRes.length;
          while (l--){
              if (myRes[l].underlineWeight<0.11){
                  myRes[l].underlineWeight=0.4;}
              }
  
      restoreOpt (myOpt);
      }
      app.doScript('main()', undefined, undefined, UndoModes.entireScript, 'Fix Underline');
  

  If it works I thank the author whatever it is wherever you are... rsrs

  hug!

• Very annoying red box in video / Clips are sliced upward (screenshot attached)

  As seen in the screenshot, how can I get rid of the red zone and make them as these very thin clips back to original so I can edit them properly? Thank you!

  

  CClick in Viewer press SHIFT - Z. Click in the timeline panel, press SHIFT - Z. Both are resize to fit. Zoom in the timeline according to the needs.

• the desktop icons get very slow at startup - compaq presario r4000

  How can I fix a very slow desktop icons appearing very thin & slow?

  Dear friend,

  Please try the following methods to solve your problem
  Applicable operating systems:
  Windows XP
  Possible causes

  1. Several startup programs.
  2. Any startup virus scan.
  3. Corruption of user profiles
  4. ShellIconCache corrupted restaur頳era file

  In this case the shellIconCache file has been corrupted. Its a hidden file located in the windows directory level that contains a copy of all the icons of the desktop by default. To resolve this problem, re-create the ShellIconCache file by deleting.

  Open folder options by typing the command files to RUN quickly. Select view and select Show hidden folders and files , and then click OK.

  

  Locate the C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data patch. Delete the file Iconcache.db.

  

  Restart the computer.
  Concerning
  Jinish.K.G
  HCL Infosystems LTD, Pondicherry

• Two thin verticle high of lines down on laptop screen

  About four months, suddenly my Dell Insperon 9300 displays a very fine white line, up and down, about 40% of the left side of the screen. In a few months it became yellow and the other has a purple, appeared about 3/4 of the way together. These lines are very thin and are there from the moment I start.

  Hello

  ·         I suggest to start in Safe Mode and check if you are facing a similar question?

  You can consult this article from dell support and check if it helps.

  Problems with the desktop monitor or laptop screen

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=266426

• When vertical, can not do taskbar as thin as the horizontal taskbar. Bug?

  I apologize if I'm redundant, but after asking around it seems that unanswered discussions are NOT open for review, so we are here ;)
  The original thread:

  "My task bar Vertical will not stay the right size, which is very thin."

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/b50f137d-F993-4c85-9708-f78d344263e4/?Prof=required

  Basically, you can make the taskbar is very short when it is at the top or bottom of the screen. But, if you decide to keep your taskbar on the left or right of your screen, it can not be reduced at least to double the minimum thickness, you can do it when it is on the top and bottom edges.

  In the thread original, a few posters that they are able to intermittently this thin, but after certain events (for example change resolution), it snaps back to the thicker size. This occurs even if the taskbar is locked.

  I used my taskbar in XP this way for years, and XP, it is possible to make the taskbar also skinny when lined up vertically. Please, oh please, this feature is possible available in Windows 7?

  Thank you!

  Paul

  It allows a smaller "hight" when horizontal is because each icon still has a large width, so it remains easily target-able with a finger.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• Failed to create the thin line style dashes

  I am trying to create a line style dotted with very thin dashes. But indesign doesn't let me do. Check the attachment.

  http://www.sendspace.com/file/hoeaa3

  Create a contour style customized to the dotted line, you can select it from the drop-down list in your object style dialog box.

• Line thin border around the Images?

  Hello

  I was wondering if someone can help me, I looked for an answer to this problem without success.

  I am trying to create a very simple project in first Pro CC, it is just a slideshow of JPEG images with a title in the whole text.

  The images are in black and white drawings on white background, however, when I export the video that I find myself with a very thin gray line around the border of the image.

  Curiously, this border does not appear in preview or in preview box export 'source and output '.

  I've attached a screenshot of the problem below.

  It is as if a kind of race has been applied to the border of the image, although I'm sure that's not.

  

  If someone could help me, that would be great. This seems like it should be a simple thing to do and I'm surprised that he asks me concern.

  Thank you

  Rory.

  I don't know what could cause something like that, but there are a few things you can do about it.

  Create an image of the size of the image in Photoshop with a white background.  Put in each picture it add to it, then save it on as a new image.

  Or you can remove the white background of each image in Photoshop and save them as png with alpha.

• Remove device management profile?

  Hello

  My friend has an iphone 6 and it hes a company certificate (Swisscom). 1 minute after activation almost all applications disappear, and you can only make calls and take pictures.

  

  Is there a way to remove this kind of profiles?

  Nope. It is the purpose of the profile.
  DEP he made sure that the iDevices purchased by the company is recorded in the DEP always apply the strategy of the company via a profile (using an MDM server) when you set up.

  The only way to change the restrictions is to ask administrators to the Swisscom MDM server - they can modify and manage anything remotely. I'm not familiar with Mobileiron (MDM server provider) - perhaps that he may try you on https://mds01.swisscom.ch/login.html with his credentials of the company? But the chances of him being able to manage the device in this way are very thin.

  My condolences to the Swisscom employees if this madness is standard. There is certainly no need to cripple a phone in this way, unless you work for an agency of 3 letters or something.

• HP 15-n063so: Wifi card

  I want to replace the Wifi card, and I have an already is: Intel dual band wireless AC 3160HMW
  It works on my laptop?

  Hello

  Your machine was built before 2014 mid, the opportunity to upgrade to any wireless card outside of the following list is very thin:

  Support for the following formats of WLAN:
  ● Realtek RTL8188EE 802.11bgn adapter Wi - Fi 1 x 1
  ● RT3290LE of Ralink 802.11bgn 1 x 1 Wi - Fi + 4.0 BT Combo adapter
  ● Mediatek MT7630E 802.11bgn 1 x 1 Wi - Fi + adapter Combo BT4.0
  ● Intel-N 7260BN 802.11 bgn 2 x 2 WiFi + BT 4.0 module combo adapter WLAN WIDI support
  ● AR9485 of Qualcomm Atheros adapter Wi - Fi 1 x 1 802.11bgn
  Intel Smart Connect technology 4.1
  Screen wireless (live) support

  If you really need ac card, please try:

  http://www.OfficeWorks.com.au/shop/OfficeWorks/c/technology/Networking/Wireless-USB-adapters

  Kind regards.

• HP 2840: HP 2840 color jumps

  So, we have a printer/scanner HP 2840 color laser unit. In the last week or two, he started giving impressions with one or more missing colors. It's pretty random, sometimes, printing is fine, and when it omits not a color it can be four. When it prints you can hear the rotating unit to each of the four carts of toner in turn, and when he jumps a noise color is different. I don't know if a gear is tighten or slide or what.

  Everyone has seen or knows what I'm looking for?

  It is a problem on this series. What has happened is the solenoid which stops the carousel in the correct position is not working properly. You can fix the problem, but it will take a bit of work. This solenoid is a marker that was used to dampen the noise of the arm 'L' hit the metal and also to prevent the arms become magnitized. You must remove the right cover and top cover. Suggest you do a search on google for the maintenance manual. I have attached 2 pages of the manual to show you the location of the magnet. The first page shows how to raise the arm 'L' to move the carousel and the 2nd page shows the coverage you need to remove to access the solenoid. Simply unplug the wire goes to the solenoid on the side of the printer and remove the 1 screw which secures the solenoid on the frame of the printer. Then, you lift the solenoid so that you can access the spring that holds the L arm in place. You remove the spring, remove the L arm and then clean any residual glue left by the cushion on the edge of the solenoid and the L arm. You have to put a form any of replacement down material. I use a very thin buffer of furniture out or you can use the component to a velcro pad. When to remove the solenoid it pull only enough further upward to access what you let the thread on the right side of the printer still outside the box is easy to replace.

• I dropped my iPod nano in water. It works again?

  Recently, I dropped my iPod in the water. It works again. I started to load and can see a watery screen!

  I fear that the damage may be permanent. Even very small amounts of water can corrode the very thin copper strips that form the printed circuit, and this may appear shortly after the initial event. In any case if you see water in it certainly does you not load. You should leave it for a while so that the water evaporates: he popularly believed that put a bag of rice (uncooked) will help as the rice will help to absorb water - in any case, it can do no harm as long as you leave no grain of rice or dust into the device.

  But you should be prepared to conclude that eventually it stops working.

• Libretto W100 - 10 d - SIM module does not work

  Hi all!

  I just bought a libretto w100 10 d with built in 3g Internet module.
  When I opened the box immediately bumped sim card seemed strange, the small plastic for the sim card support has been very thin, weak and seemed bent, I tried to insert the SIM card but plastic could not hold the sim card and it broke, I managed to insert the SIM without plastic support but no modem 3g found , said the "toshiba wireless manager.
  What should I do?

  Thank you

  > When I opened the box immediately bumped sim card seemed strange, the small plastic for the sim card support has been very thin, weak and seemed bent, I tried to insert the SIM card but plastic could not hold the sim card and it broke

  Hmmm probably you have suffered this module :(
  In your case I would recommend you contact the ASP in your country and the technician must check this module maybe it needs to be replaced.

• Issue after upgrading processor in HPE Phoenix h9 - 1120-t.

  Hi all.  I had debated on the amendment on the processor (an i7 3770) in my Phoenix HPE h9 - 1120t after that I got my hands on an i7 and 3770 k, still in the box.  Following an injury, I've been away from work for a few weeks - so my pure boredom I went ahead and change on the proc.

  It's relatively simple and no different from any other treatment that I have changed/added other space restricted in the case of Phoenix.  And once I had the liquid cooler and fan/radiator turned off, it's easy as a pie.

  I had no problems at all and it booted right up at the first attempt.  Yes I know it's a tiny increase in frequency, and my just Pegatron Z75 Board is not really made for serious overclocking (I got it at 4.1 GHz for about four hours using the Intel Extreme Tuning Utility and time has hovered around 45 c, which is fine, but I don't want to stress out you my mobo so I supported down to default speeds again).  I don't really plan to do much OC'ing, but it is still nice to have an unlocked CPU.

  Interestingly, there was a fairly large amount of TIM on the CPU and the waterblock when I removed it.  I was always in the pea or the size of BB camp, and I'm curious to see what users here think.  I cleaned the plate cooper real good with some 91% isopropyl alcohol and then put my pea size place on the central area of the CPU die (I used Artic MX-4), which allows the waterblock to spread it when mounted.  My time seem to be really on the same property.  I slowed down around 28 - 30 c, which is what they were on the no k.  I wonder if there have been good studies on thermal paste, and if someone proved the entire surface of the CPU that is painted on the method or the method of pea size dab is preferable.

  I have a question though.  Warranty associated.  Since I still have a year left on my warranty, what happens if something happens and I need to send the whole rig under repair at HP?  Do I have to restore the original components and put the former no k 3770 back in?  The reason why I asked is that I have a chance to sell the old da, but I was worried that I might need if something bad happens and I'm in need of repair or service.

  

  With regard to thermal paste... too much is as bad as not enough. In all there should be a very thin layer of compound... just enough to fill in the blanks between the contact surfaces.

  Like many, the guarantee will return all components of the stock to the computer and the backup... or make image to your hard drives. I have a graphics card improved HP because the specifications were inaccurate and I relied on them for the purchase of the computer. Customer support escalations manager told me to keep the original of the card corresponding to the correct plug where the system had to go home. I guess it's because the technician can replace components with parts... If technology don't, perhaps you miss an Intel i7 3770 k. There are also many discussions of the forum on component being change and hard drives being wiped.

  Please send Bravo