Document text for After effect Cs4

Similar Questions

• AVI out after Effects CS4 vs CS6 for LED panels

  I do with After Effects cs4 avi to play on billboards and have no problem of transmission at the sign. Customers say that they upgraded to After Effects cs6 and avi will play is no longer on the sign. There may be no compression on a file for a LED sign to play but the cs6 files I have seen have no compression and all parameters are the same as in cs4. I want to spend my Department to the latest version of After Effects but not if it will not work with LED signs.

  It is my hypothesis that the specifications listed by aardeb in his last post are output parameters, he faces problems with AE, not the specifications required by its system of signalling LED.  Equipment LED the most traffic I've seen requires content uncompressed of one kind or another.

  If that is correct, must be resolved in the output Module

  Compression type: None (compressed or not)

  The other settings should be left at the default values after setting the Compression Type.

• Hotlinks for first and After Effects CS4 with titles

  I created a Rolling title in Premiere Pro CS4.  I would like to create a dynamic link to get back the title in After Effects CS4 to add effects that appear in the first.  I watched a few video tutorials on Dynamic Link and read the documentation and tried a variety of permutations but can't seem to get there.

  Also saw something in these forums about the problems using dynamic links with titles (as opposed to regular pliers?)

  And something about the Premiere and After Effects projects being saved together? in the same folder - is that correct?

  So, could someone explain to me if this is possible and the right way to do it?

  Thank you

  First titles are usually not supported æ as separate entities, since they do not exist as such. Only the titles added to a timeline of the Organization will be present themselves, but can renderings and merged with the background. So, essentially, that it is not the best of ideas to create even titles in first in such a scenario - you can only end up seeing a ton of solids in the placeholder or a completely black canvas. If this is the case, make the titles to separate TIFF or PSD with adequate transparency. And Yes, the projects must be saved in the same location relative to avoid lack of sequences and make mistakes...

  Mylenium

• Unable to install Adobe after effects CS4, why?

  I downloaded "adobe after effects CS4" from this link: Adobe - After Effects: For Windows: Adobe After Effects CS4 9.0.3 Update and when I was about to install... He said "can not install please click the leave"... I don't know why it goes like this. Are there requirements? Have I forgot to do something before I downloaded it? Please tell me why I really need to get adobe after effects CS4, its for my project... Please

  This link is not a full instal packake to Adobe After Effects CS4 - this is just an update.

  If you need sign in AE to your account Adobe and download Creative Cloud App and since CS6 AE, CC or CC 2014.

  Adobe: Creative, marketing, and document management solutions

• I did a shape layer, and it moves in After Effects CS4.

  Hello

  I'm working on a project that has a lot of masks and shape layers to frame masks in After Effects CS4. For example the timeline that I am focusing is 3 seconds long; There is 2 keyframes in the shape layer (vertical rectangle), key frames are 3 seconds gap and are at the same position (511.1,89.5). If I go to the beginning of the seconds 3 press the space bar and let him play for some reason any moves the rectangle from left to right. Although keyframes aren't there, he is moving-even thought the last keyframe to the left is the same as the next keyframe law - as the first screenshot

  The best solution, I came up with for this is to copy and paste keyframes so that there is a keyframe for each frame within 3 seconds, then I get a schedule like the second screen shot.

  Is there something I could use where I could select 2 identical keys seconds out and make the form remain in the same spot with them into the second screenshot? It is speed and things happen quickly in this case isn't it?

  I also had an another question-are there - it a shortcut to insert a keyframe in the timeline? I found a page with all the shortcuts and couldn't find this one should be.

  Thanks guys, you have been life savers in the past!

  As keyboard shortcuts you go to hold down the option/alt key and the keyboard shortcut ' Show/Hide properties ' to switch between adding and removing keyframes.  Adobe does not have the freedom to document them all in their page keyboard shortcuts, so here goes:

  Option + P: Position keyframe

  Option + R: Rotation keyframe (adds the keyframe at all values of rotation and orientation if the layer is 3D)

  Option + S: Scale keyframe

  Option + A: keyframe Anchor Point

  Option-T: Opacity keyframe (adding a keyframe of intensity if the layer is a 3D light)

  Option + M: Keyframe mask path

  Option + F: Mask Feather keyframe

  Option + L: Levels Audio keyframe

  * This does that for the single letter shortcuts - double letters do not work (i.e. TT for the opacity of the mask, RR for the time remapping, etc.).

  * Option + shift + the letter will work too which is good if you have reconfigured the Option + letter for other things such as throwing scripts - that I have.

  On the "boomerang" effect, I highly recommend you go to your preferences > "Général" tab and turn on 'by default spatial interpolation to linear', then you can manually add the Bezier handles to your keyframes in the composition Viewer if need be.

• You can create the title effect in Daybreakers, adobe after effects cs4, please take this one as cha

  IM considering Adobe After Effects CS4 and I found the title of the film DAYBREAKER (2009) a very interesting to create effect, I hope you can give me some tutorials on how to do it... Please! more power, NOTES: im using adobe after effects cs4

  From what I've seen on the trailer for this film, titles are a modified version of George flowing Peolvoy title tutorial posted on Creative Cow about 10 years ago. You can find the tutorial here.

  The effect on the type of glass can be reproduced using layer effects in Photoshop and / or then apply the layer effects to your text layer directly in AE. You will find a lot of these tutorials by doing a simple search on Google for glass Photoshop text.

  There is not a single click, a plugin solution, but if you integrate the effects of layer, a card of displacement, a compound blur and keyframes for position a little + blur of movement, you should be able to reproduce the effect exactly. Tutorial of George should help you get started. If I remember correctly the project files were for AE 4.1 so they probably will not open in CS4.

  Good luck

  

  Daybreaker trailer

• Why the text "adobe after effects" made its appearance in my rendered composition?

  Why the text "adobe after effects" made its appearance in my rendered composition?

  Probably because you have applied a predefined text animation and did not change the default text for this.

• Adding After Effects CS4 CS4 Design Premium

  Hello Adobe community.

  We have Adobe Creative Suite CS4 Design Premium for Mac, which does not include an After Effects CS4, I discovered. I found the download link for this in the downloads section, but of course, it will fail to activate with CS4 Design Premium serial number we have.

  I did not need after effects CC or any new version, after that Effects CS4 is one that we need - is there no way to buy a license or serial number just for that?

  Thank you...

  correct, there is no way to purchase/license any product pre - cs6 Adobe including ae cs4.  you will have to buy a 3rd party and try your luck buy adobe cs6 (or subscribe to cc and 'rent' your cs6 and/or adobe products cc).

• Keyboard shortcuts sheet for after effects CC

  Hello

  Someone at - it a sheet of hotkeys (single page) for after effects CC?

  In addition, customized for CC available keyboards?

  I saw the sheet shortcuts keyboard for older versions of AE and keyboards for the old version.

  There are nearly 900 for After Effects keyboard shortcuts. They can all possibly take place on a single page.

  The PDF version of the document helps Hans pointing to contains all shortcuts in a unique reference section. You can access the HTML version of the same content using the help > command in After Effects keyboard shortcuts.

• After Effects CS4 project to another computer

  I essentially built a project in After Effects CS4, but unfortunately, my computer is quite poor and crashes during rendering. So I was wondering if there is a way for me to all of the transfer project to another computer with After Effects, in order to make and edit it more it instead. Thank you.

  Collect files command to gather all the images in a single folder, copy the folder to an external drive and move it to the new computer. You must also do ot sure that fonts and the codecs used are installed on the new computer.

• Effects of lightsaber using the dynamic link with Premiere pro and After Effects CS4

  Hi all

  I'm working on a video project and that you want to add a lightsaber effect, but a layer which is suppose to be transparent isn't using dynamic links.

  I shot the video in my head, and everything else hidden.  I made a flash body to put my head on.  Now I know how to make a lightsaber in After Effects CS4. (starting with comp 1 with videos making a white solid layer, and then using the tool pen to make the sword.  Then copy the sequences video and place it in comp 2.  Then to return to comp 1 and remove the video sequences. then on comp 1 making a SOLID BLACK LAYER {that's the problem} and place it under the layer of white.  Then duplicate the white layer 3 times.  Changing each feather white layer mask to make the glow.  so going to comp 2 and take the 1 model and her nest to model 2...  Then change the blending mode of the model nested 1 to the screen.

  The main timeline in Premiere Pro CS4 and I have the video layer 1 to Photoshop file which is pink and the background of this project.  I made a dynamic link to After Effects and copied and pasted the video images and flash to the comp.  Here, I made the lightsaber.

  That is the problem.  The model of dynamic links with video, flash and the lightsaber will not show my pink background in Premiere Pro shows him my video, flash and lightsaber but the background is black.  In case of problems, I noticed if I turn off the LAYER BLACK for the lightsaber effect, I see my pink background with video and flash sequences and the glow of sabre, but my blue lightsaber color will not appear.

  Do more problems I set photoshop to lightsaber model file and I see the video, the flash, the lightsaber but I think because the background is pink I don't get a color glow to the sword (vilot color)

  If the layer of black is supposed to be transparent, so why can't see my background in Premiere Pro using dynamic links?

  appreciate any help I can get,

  Thanks in advance.

  Mr. PETER K

  P. S. - one-way I kinda had this work was I took one of the masks of white and copied and pasted layers in nested layer comp 1.  Adjusted to the width of the mask and the pen and I got a glow of blue ok.  You just can't mask width too because it shows a lot of black.  It is not as good as I want and I hope someone can help...

  Thank you again...

  Well, blend modes don't create transparency, so the behavior is correct - because technically, the background of the model is ignored for the mix of operations, in areas where there are no content below for the mix, only the layer of black color is used. You create transparency good, real luminance based on unmultiplying, that can be done with the Knoll Unmult plugin Red Giant Software (free) or the effect of changing the channel of the AE monitoring bey a color delete effect.

  Mylenium

• After Effects CS4 is no longer loading after installing Office 08

  During the Christmas break, I installed Office 08 and her sewing to have mucked something upward in CS4, After effects because it won't load, the program starts to load libraries and all that stuff of the splash screen and crashes when loading the user interface

  After effects brought long before I installed office 08. Anyone know what's happened and how to fix it? The strange thing is, it works on a couple of Mac, but the majority of the lab is having this problem.

  I tried a lot of things:

  -Completely uninstalled office 08 and preferences
  -CS4 to uninstall and manually delete all the files preference
  -Locate the font files and compare fonts with that of a working mac
  -Create a new login
  -Update for After effects 9.0.2

  After spending hours and hours and hours, in doing so, I had no chance to resolve the issue. Help will be greatly appreciated... I backup all the data and re - install Leopard next week if nobody knows how to solve this problem.

  Here is a part of the error message that I have reported to adobe and they have not had a response

  Process: After Effects [139]

  Path: / Applications/Adobe After Effects CS4/Adobe After Effects CS4.app/Contents/MacOS/After effects

  ID: com.adobe.AfterEffects

  Version: 9.0 (9.0)

  Code type: X 86 (native)

  Parent process: launchd [93]

  Interval since last report: the 204 s

  Crashes since last report: 1

  Per-App interval since last report: 148 s

  Per-App crashes since last report: 1

  Time/date: 2010-03-17 11:13:10.239 + 1100

  OS version: Mac OS X 10.5.8 (9L31a)

  Report Version: 6

  Anonymous UUID: 93AB0F34-3CF9-41AE-A9E5-21738DB3269F

  Exception type: EXC_BAD_ACCESS (SIGABRT)

  Exception codes: KERN_PROTECTION_FAILURE at 0 x 0000000000000008

  Crashed thread: 0

  Thread 0 crashed:

  0 libSystem.B.dylib + 10 __kill 0x91ccce42

  1 libSystem.B.dylib 0x91d3f23a stimulus + 26

  2 libSystem.B.dylib + 73 demolition 0x91d4b679

  3 U.dylib 0x029a529f U_LoadFrameworkBundle + 671

  4 libSystem.B.dylib + 43 _sigtramp 0x91ccb2bb

  5 com.macromedia.FLVExporter 0x2ba2ded5 FLVCore::Initialize(__CFBundle*) + 657

  6 com.macromedia.FLVExporter 0x2ba45c32 FLVExporter::FLVExporter(ComponentInstanceRecord*) + 130

  7 com.macromedia.FLVExporter 0x2ba46005 FLVExportOpen + 37

  8 com.macromedia.FLVExporter 0x2ba468ca FLVExportComponentDispatch + 130

  9... ple. CoreServices.CarbonCore + 29 CallComponentDispatch 0x957b2935

  10... ple. CoreServices.CarbonCore + 43 CallComponentOpen 0x957b2915

  11... ple. CoreServices.CarbonCore + 449 OpenAComponent 0x957b0fb1

  12... ple. CoreServices.CarbonCore 0x957b0dea OpenComponent + 24

  13... dobe. AfterEffects.framework 0x00fe574c FEE_GetMotionTrackCmdAttrs (bool, long, long, bool, char *, bool *) + 512746

  14... dobe. AfterEffects.framework 0x00fe58fb FEE_GetMotionTrackCmdAttrs (bool, long, long, bool, char *, bool *) + 513177

  15... dobe. AfterEffects.framework 0x00fe7d5c FEE_GetMotionTrackCmdAttrs (bool, long, long, bool, char *, bool *) + 522490

  16... dobe. AfterEffects.framework 0x00ce44db CEggApp::IEggApp (bool, bool, boost::function0 < < boost::function_base > > sub, std::allocator) + 17347

  17... dobe. AfterEffects.framework 0x00ce7e4d CEggApp::CEggApp (bool, bool, boost::function0 < < boost::function_base > > sub, std::allocator, long) + 919

  18... dobe. AfterEffects.framework 0x00ceb825 egg: dvainit::DVAConsoleEnabled() + 1809

  19... dobe. AfterEffects.framework 0x00cebc37 EggMain (bool, bool, bool, bool, bool, char *, bool, long) + 97

  20 com.adobe.AfterEffects main 0x00005bc6 + 1574

  21 com.adobe.AfterEffects 0x00004f62 _start + 216

  22 com.adobe.AfterEffects 0x00004e89 start + 41

  Thread 1:

  0 libSystem.B.dylib 0x91c8f9c6 kevent + 10

  1 libSystem.B.dylib 0x91c90155 _pthread_start + 321

  2 libSystem.B.dylib 0x91c90012 thread_start + 34

  Thread 2:

  0 libSystem.B.dylib + 10 semaphore_wait_signal_trap 0x91c5f2ce

  1 libSystem.B.dylib 0x91c912c6 _pthread_cond_wait + 1267

  2 libSystem.B.dylib 0x91cd6539 pthread_cond_wait + 48

  3 com.adobe.amt.services 0x1f44e294 AMTConditionLock::LockWhenCondition (int.) + 52

  4 com.adobe.amt.services 0x1f448bfa _AMTThreadedPCDService::PCDThreadWorker(_AMTThreadedPCDService*) + 130

  5 com.adobe.amt.services 0x1f44e379 AMTThread::Worker(void*) + 29

  6 libSystem.B.dylib 0x91c90155 _pthread_start + 321

  7 libSystem.B.dylib 0x91c90012 thread_start + 34

  The failure appears to be in the FLV QuickTime component, which is a FLV to QuickTime as Adobe Flash exporter (or older versions of Macromedia) installs in your [home folder] / Library/QuickTime.  After Effects loads such matter which component that QuickTime is available (they appear in the file > export menu).

  First of all, try to remove the com.macromedia.FLVExporter in your folder [user name] / Library/Preferences, if it is present.  Otherwise, remove the FLV QuickTime component, I described above.

  It is also theoretically possible that the failure is to the next component in the folder of QuickTime, not the FLV component components.  You might could just remove all of the contents of this file and see what happens.

  -= TimK

  -After Effects QE =

• After Effects CS4 and conversion in a lossless format

  I posted in the forums Adobe Premiere about a problem I had with my renders. If you want to read, then you can check with the following url.

  http://forums.Adobe.com/message/2622969#2622969

  What I realized is that After Effects doesn't like my AVCHD files I receive from my camera. (They are a h.264 and m2ts file type MP4)

  The problem is that I get "echos" or jump when I give something back in After Effects or return with Media Encoder via links dynamics and Premiere Pro CS4.

  I'm not familiar with is types of files that a lot of you who are more expereinced that I use for After Effects when you must convert to a lossless format (or as close as you can get to be "Lossless".

  I was wondering if someone could recommend the types of files should I be convert and if you have a good method to convert. Not that I want people to discuss other software here, but if you use not Adobe programs to convert, so what types of files you convert to?

  In other words, where do recommend you I begin reading or research on this because a large number of companies sell conversion programs. I currently have one I paid for, but it does not work I need to do to the HD. I want to keep as close as possible HD quality.

  FYI, usually, I'll do the video with green screen effects in After Effects. My output is video. If you have any other questions about my process, then feel free to ask me questions. Other than that, have I appreicate any advice.

  Yes, of course, there are better days for QT and recent versions are UM pretty - ho (Apple simply does not know how to make good software PC, if you ask me), but at least it offers a few options widely accepted codecs, which is somewhat important not only for your own reading, but at the latest when you need to share with other artists. AVI Windows own offerings are severely limited in this regard, literally leaving only uncompressed or ELA MS for intermediate workflows. It is if you do not have the commercial CoDecs like Cineform, do not want to get into the tumultuous waters of free CoDecs like HuffYUV and Lagarith or do not like AJA capture cards with their own set of CoDecs...

  Mylenium

• Adobe after effect cs4 crashes

  Hey well guys when I'm on adobe after-effects and I new composition, it's just makes a noise like a sound of windows then crashes, why what is happening is their a soloution. Thank you

  You have successfully updated to 9,02? (with the update from Adobe)

  You can start with the technical support document that corresponds to your operating system:

  Troubleshoot crashes, system errors and freezes (After Effects CS4 on Windows Vista)

  Troubleshoot crashes, system errors and freezes (After Effects CS4 on Windows XP)

  Troubleshoot crashes, system errors and freezes (After Effects CS4 on Mac OS X)

• After Effects CS4 install on Win XP 64 bit OS

  I try to install the After Effects CS4 for a Win XP 64 bit OS trial version.  There was only a single downloadable trial available and figure that if there is 64-bit trial versions, it would be packed with this also.

  Setup designates the place of installation as "C:/Program/Adobe" which is correct because it is the location of the 64-bit program folder.  However, he falls in fact demand in "C:/Program Files/Adobe (x 86)".  Also when After Effects CS4 is run, it appears as a 32 bit application in the Windows Task Manager process list (labeled as "AfterFX.exe * 32")

  If possible, is it possible to get to After Effects CS4 correctly recognized as a 64 bit under XP64 application?  I know that this OS is not entirely supported by the system configuration required, but managed to install Photoshop CS4 as a 64-bit problem-free application.

  Another thing that confuses me is also the After Effects CS4Readme/technical note:

  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb405854 http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb405854#_Toc162848026

  By problems known...

  "When installing on 64-bit Windows Vista, an incorrect default installation location is displayed. The application will be installed to the correct location: C:\Program Files (x 86). (#BG064131) »

  This means After Effects CS4 is a single 32-bit application?

  Yes. For now, the AE is still a 32-bit application.

  Photoshop CS4 (Windows) is a 64-bit application, which is why it installed under 64-bit application path structure.