Documents are not correctly displayed in compatibility mode and exposure compensation is reduced to 1/3 of the previous length.
For no discernible reason, my documents suddenly started appearing in compatibility mode when they were previously saved as docx. At the same time, the paper began to appear about 2/3 of the screen down, leaving only a small vertical rule and about 3 inches of space to type on, so that the entire page is previously appeared. The screensaver or the part My Documents present in the space above the document. Everyone knows this? Analyses of virus are clean.
Hello
I suggest to perform the system restore and check.
How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084
Tags: Windows
Similar Questions
-
Canon 5 d images are not correctly displayed in the develop module, they look posterized or something. They look fine in the library module, what happens?
Try turning off the GPU. Go in Edition > Preferences > Performance (Lightroom > preferences > Performance on a Mac) and uncheck the box use Graphics Processor.
-
Tecra M5-400 after uprade to Visa - icons, text are not correctly displayed
Dear users,
Just upgraded my Tecra M5-400 in Visa Ulimate. The problem now is that the icons, text, etc. are not displayed correctly (big, dull). Tried drivers from Toshiba, but none of them is specific for my model, and some of them do not install.
Any ideas what I should do or what driver I need to download?
Thank you!Hello
Your device should have nVIDIA Quadro NVS 110 M graphics card. Google around and try to find the Vista driver for the graphics card.
-
Images and buttons and some web pages are not correctly displayed in Standard accounts
Original title: images and no visible buttons.
Can you please help.
Our family has a computer which is now 18 months old that it was loaded with Windows vista, again and we use Windows seven and Google as our browser. We have three users set up for my son and my wife who is the admin on the system by password.
The button images and some pages are not displayed correctly the web they have a Red Cross in it if you hover over some of the buttons they invented the text boxes and work, but not all.
However my wife who is the administrator has no meanings and we have removed all administrator rights, but the problem is still there for me and my son.
Your help on this issue would be grately appreciated because he drives me crazy.
Kind regards
Cliff.
Hey, Cliff,
You can try to create a new user account and check if the problem occurs.
Check out the link:
Create a user account
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
If the problem does not occur then check out the following link and follow the steps to repair the corrupted user profile:
Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Theme 25 - items are not correctly displayed in the presentation of the grid
Hi all
APEX 4.2.5.00.08
Oracle 11g Enterprise Edition
I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed. I read a blog and he said to remove all the colspan which will then automatically display elements. I did, but it did not work. The form consists of several parts using a list of tabs on the page. Parts of the tab using the model 'Region without the buttons and titles' of the region. I tried to replace the template "no model", while he was a little better, it has not corrected the problem.
I've migrated the application and objects in the db at the APEX. ORACLE.COM (it took a few hours) and I hope someone can resolve my problem until the site is upgraded to 5.0.
Workspace: RGWORK
Application: KIMBERLY (33925)
Page: Vehicle details (13)
Username: TESTER
Password: test456
The first screen will be a Update/View vehicles 1 choice menu
Choose this option and a report with a single line id.
Select this line and display page 13.
You have Developer access but please keep me on what has been fixed. I don't want remedy you. I want to know what has been resolved as well.
Please get back me to me as soon as POSSIBLE because the site is upgraded to 5.0 this Friday.
Robert
sect55 wrote:
I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed.
Why you want to switch to theme 25 instead of simply retain the theme that was used in 4.1?
Go wrote:
Robert,
Look at your application. just a simple change.
change:
Region: Veh/equip Information
Presentation of the grid:
Start the new row: Yes
That helps, but it's not the whole story, as it appears the layout is still affected by the problem described in the thread previous Theme 25 region without buttons and issuance of securities
Applying the fix I suggested it (in 78449 application I created a copy to ensure that I was working with the initial problems) Gets the items on the same line, but I guess that's not the same as the original provision and it doesn't look very good.
Basically, I would say either stick with the original theme or by switching to a 4.2 theme that still use the page layout based on a table (for example, 24 or 26). Theme 25 is difficult to work with and works best with presentations created especially for her from the start.
-
color in CS4 are not correctly displayed since the upgrade to windows 10
I have upgraded to Windows 10 last week and I had problems with colors does not display does not correctly in CS4. I tried to take a screenshot of exactly what I see in CS4, but when I post it online it seems fine. Telling me that something is now display properly in CS4. It also happens in LR3. When I post the photo online or look at him in the Windows Photo Viewer, it seems. I took a video of what is going on, but the quality is not so great. I apologize. Can anyone help? I have been searching the Internet for two days and can't find an answer to my problem. I went to the Intel website and there is not an updated video driver for my graphics card.
Most likely you have a bad monitor via Windows Update profile. Manufacturer profiles are notoriously unreliable and often faulty and should always be avoided.
This will only affect the applications of color management that actually use the profile.
Recalibrate, or if you have a calibrator uses sRGB IEC61966 - 2.1 until you get a.
Restart Photoshop when done so he can pick up the new profile at startup.
-
Lists are not correctly displayed in the web browser
I use robohelp 7 and I have actually two problems. First problem is if I create a < li > when I switch mode html to design mode and then back to the html view the < ol > has been replaced by a < ul >.
Then I use the nested lists. They appear as you want in design view but when I complie the code and run it in FF or IE 8, the lists are not displayed as lists. The content of these lists is displayed just like each item in the list is a separate line. Also it will display not < dl > either.
In this new, I believe that a descendant selector missing could be a problem. In other words, there is no rule to cover this line (one
without a anchor, or its contents):
- What happens if you delete that Online? Or, what happens if you keep the line but add an anchor and text (duplicate the line in search of the next
- Why lists nested in aelement? They are normally used to establish a separate division on a page (other than normal)the elements), such as blocks of navigation on the right side of a page, high or low.
- Why are
- tags so restricted and? In other words, the #menu ol li a: link rule covers an anchor If it is nested in a
- tag, If that
- tag is nested in a tag
- and only if
- tag nested within a
Unless you need different
- and styles for others
selectors, the use of descendant selectors can be extremely difficult to control. I might even suggest to start fresh with the default.css (one of several provided by HR) and set it- individually.
Good luck
Leon
-
WebHelp topics are not correctly displayed in Microsoft Windows/Edge 10
Hi, someone else experienced problems display WebHelp output in the browser Edge Microsoft in Windows 10? I found that CSS styles are not used in one of the subjects and images are blocked. When I try to access the start page, it is redirected to whnjs.htm. The WebHelp content properly on other browsers on windows 10 (IE, firefox, chrome, etc.). Any advice would be appreciated.
Thanks for all the tips. Our solution was to switch to the sensitive HTML output. It works well with the edge browser.
-
marked document is not correctly displayed in the Preview on a mac
I use Adobe Acrobat on a Macintosh computer. If I mark up a pdf document using acrobat, then save the strong document to a pdf file. I find that when I open the document in preview mode before annotations are displayed incorrectly. I can deal with this by first save the file as a ".ps" file and then convert it to a pdf file, but I don't see why I have to go to all that trouble. So how I simply record a net in pdf file and then open correctly in the preview?
Thank you.
Sounds like a problem for a Preview forum...
-
How can I correct the installed fonts which are not correctly displayed in InDesign 2015?
I use InDesign 2015.2 on Windows 7. I'm working on a document and you want to use a family of fonts installed on my computer. Not all fonts display correctly in the window however. When I select some fonts to a paragraph style, they appear as symbols and glyphs. These fonts appear in the drop-down type (and an example of the face appears in the drop-down list). They work very well in other applications Adobe, such as Illustrator. No idea why I can't get to work in InDesign? TIA!
No, just reconnect to the account else and trash the prefs see replace your preferences
-
Bookmarks are not correctly displayed in the iOS app version 15.4
We are having a problem with the current version of the iOS app. Bookmarks to a PDF file are displayed in the application, but the part of the text for the bookmark is missing. We tried to open the PDF in iBooks and bookmarks are displayed correctly. See the attached images.
HI jamieh40910107,
Thanks for posting the screenshots. They are very useful.
The second screenshot shows clearly that the bookmark labels contain newline characters. Your bookmark labels extend two lines.
line 1:6.
line 2:. Horse Expo
line 1:7.
line 2:. a. second reading...
Acrobat Reader for iOS shows only the first line ('6', '7') of each bookmark label and don't watch not the second line. In contrast, iBooks shows multi-line bookmark labels.
I will file a bug report for the problem with bookmark multiline labels in Acrobat Reader.
As a solution, if you have a copy of Acrobat Pro (a PDF editor for Windows or Mac computers), you can change the bookmark labels to remove line break characters and turn them into bookmark single-line labels.
Alternatively, you can use a trial version for 30 days to see if it fits your needs.
Download Adobe Acrobat free trial | Acrobat Pro DC
Thanks for reporting the issue!
-
Chinese characters are not correctly displayed in programs
Have you ever this resolved?
I installed Windows 7 Ultimate, version English, use Windows Update to get the support of the Chinese language, then set up a username for my Chinese wife, with its language set to simplified Chinese. Some things will appear with the text of disorder "(iaa÷4£ ºo³ani³oi).I played with the locale and tried several things of different issues here. None of this helps somehow. At least, he did not the worst problem.Hi gordintoronto,
What steps you have tried to solve the problem?
You can follow this link and check if the problem persists.
To install the files for East Asian on your computer
Hope the helps of information.
Please post back and we do know. -
PDF files are not correctly displayed in Windows XP
original title: gibberish in pdf formatI used to be able to open PDFs with Windows XP Home Edition, but now all I get is gibberish.
Do you have a PDF Reader installed?
Adobe Reader
http://get.Adobe.com/reader/Foxit Reader
http://www.foxitsoftware.com/PDF/reader/Adobe is more "well known", but Foxit is much more compact and my personal preference.
-
Firefox will not correctly display some web pages and addons can not be installed.
I just installed firefox to the computer after the installation of the Windows 7 operating system.
It does allow me to install an addon in the browser. In addition, it does not display the page addons firefox and github.com. (only plain html is displayed without CSS any kind of things)
I tried to remove cookies, remove stuff history and running in safe mode. None of the methods worked.
The web pages above perfectly displayed in other browsers on the same computer.Hello deamonpog, please make sure that your system date, time and timezone are correctly set!
-
Change is not correctly displayed in the develop Module
When I make a change in the develop Module, changes are not correctly displayed in the main window and the browser window becomes gray. When I get back to the library Module, the changed image appears correctly. Then when I get back to the develop Module, the changes appear correctly. I followed the troubleshooting steps and a single point Adobe says that the permissions of the user is perhaps not good. I created a new user, and in the new user profile, LR works as it should. I use Windows 7. What should I change in the old "user permissions" to match the new "user permissions"? I prefer to delete the new user, rather than recreate my environment all over again.
If you see gray windows to develop, it is almost generally a bad monitor profile in Windows. Unfortunately quite common. You should recalibrate the monitor. If you do not have a calibrator, try to go into the properties of your screen pane. Go to the color management tab and remove any profile associated with the parser.
I expect that you would need settings for a rule as follows:
#menu ul li {}
I also think:
- )?
Maybe you are looking for
-
I can't open attachments to email on iOS iphone6 9.3.1. I have a hotmail account and Adobe app on phone. Just cranks away saying download but does not work Parts ideas?
-
No option to save the tabs by exiting the application
When I try to close firefox with several tabs open, it warns me that I'm about to close multiple tabs instead of asking to save and exit. I run firefox in safe mode to check if the extensions were prejudicial to it. They are not. I also renamed both
-
My Compaq Presario Sr\R1320NX with Windows XP, 32 bit said missing operator when I turn it on.
-
Why all of a sudden can't Windows Defender update on my XP Home?
I've been using Defender since it was in beta (started). I went to update it and perform a scan today and now it say's that it cannot update on my computer. What gives?
-
How to install hp dvd with the software and drivers, which came with a recovery CD?
G72 259WM laptop... The application and Driver Recovery DVD supplied with the recovery kit (3 DVDs) was not loaded on my laptop when the hard drive has been replaced. I want to intall it butg there install the files on DVD and windows does not load i