Does anyone know if all the widgets of HotSpots are not valid in Captivate 8?

Similar Questions

• Does anyone know why all the boxes in my Overlay creator would just stop working?

  I check on them but no ticks appear leaves me not able to create anything! In all documents.

  Have you tried to delete InDesign preferences? Start InDesign, and immediately after, hold down the modifier keys (control,alt,shift, or ctrlalt-shift option). Click Yes to delete and then see if the Panel options work.

• Does anyone know where is the "marker to start project?

  Does anyone know where is the "marker to start project? Not here, and where it is shown in photos in "help". Use often to start my sessions a few bars before 1 Bar. The "End of project marker" triangle is at the end of my session and 'Help', said that both exist. Thank you!

  The beginning of project marker is shown below...

  You may need to scroll the window arranges a little to the right of having show itself.

  Very important "DO NOT SET YOUR PROJECT START MARKER EARLIER THAN 1,1,1,1"

  Doing so brings various undesirable problems caused by a negative project start marker.

  Just start your project at the bar 3 or where to leave room for everything what you want to do earlier. Don't forget you can still "enter time" at any time after creating a project to make more room and move the whole project to the right if necessary.

  

• Hello. Does anyone know why a dot on my videos but not my photos? Thank you.

  Hello

  I'm pretty new to DSLRs and I have a strange problem, I hope you pros can help with

  I recently had a canon t3i and use it mainly for video. A small dot (see below, in the yellow circle) has appeared in videos. It is always in the same place and it did not exist before. At first I thought there was something on the lens, but no, and the strange thing is, the point does not appear when I take still pictures, only videos.

  Nobody knows what this could be and how can I get rid of him?

  Very appreciated

  Vlaminck

  

  This likely dust on the sensor – don't be not alarmed, it is ordinary and easy to clean.

  There are actually two filters in front of the sensor - then 'dust on the sensor' is really the dust on the filter (nothing can really touch the sensor.)

  Most of the models of rebels have a self-cleaning - mode but it uses a piezoelectric effect vibrates the filter and I hope only to shake loose dust.  He used to always work.

  If this does not work, you have two options... it take a photo shop to clean (some stores may practice you a little money... even if I've heard of places that charge customers $50 - I think that's quite excessive.)  The other option is to clean it yourself.   If you do a lot of photographry, you can learn to do it yourself as well because it is something you will probably need to do from time to time.

  I have levels of aggressiveness that I use to clean a sensor... start by simply using the puffs of air (not very aggressive) and working my way up to the point where if nothing works otherwise, I could have possibly used the wet cleaning (but is almost never necessary.)

  Remove the lens, point the camera down so that the aperture of the lens is facing the ground (or resting on a table).  Turn on the camera, use the menus and select the self-cleaning option.

  See page 184 of your manual.  Basically you press menu, navigate to the #2 yellow key and navigate to "sensor cleaning".  Call the "Clean now" option (you may need to do more than once... but if it is not clear after 2-3 attempts, then the time to move to the next step.)

  By the way, to check if it is clear, put the lens on.  Set the camera to Av mode, compose a value large aperture (f-stop) - say f/16 or f/22.  Now, find a simple white wall (or ceiling) and take a picture.

  It is the sensor dust easy to spot VERY when you have a white non-contraste surface like a white wall or a ceiling AND use a high value of f-stop.

  It is clear, very well.  You are finished.

  If this isn't... next step is to get a hand blower - squeeze - like a Giottos "Rocket Blower.  I do NOT recommend you cans of compressed air.  These boxes will spray a residue (fuel) on the filter if you do not pay attention and then the filter should be cleaned at the wet.

  Access the menu cleaning sensor itself, but instead of "clean now", choose "Manually clean".  This causes the camera to raise the mirror and open the shutter to expose the sensor (really the filter).  Keep the camera pointed down and apply several puffs of air into the camera.  DO NOT let the tip of the fan touched anything inside the camera (otherwise you can mark or scratch the filter and make things worse.)

  If that is not ALWAYS clean, I use a magnifying glass to inspect the sensor to see what I'm working with.  You can buy these brands such as "Sensor scope" and they are inexpensive.

  My next step is to try a VERY soft brush to see if he brushing.  Use without pressure... just a few features very soft and very light should do.

  If none of this works, then it's time for the wet cleaning.

  Buy brand Eclipse cleaning solution (made by "Photographic Solutions, Inc." and transported in more real camera stores (not department stores that sell cameras).  You can also order online.

  You will also need the right size, cleaning swab.  This same company (Photographic Solutions) makes "Sensor swabs" but they come in sizes to fit your sensor.  For cameras with sensors APS - C size (which is what you have), you want a buffer of size of Type 2 sensor.

  OK... the purpose of this next step is do NOT damage your camera buy waste of money (not... "I'm not kidding actually.)

  You will place about 2 drops of Eclipse solution on the end of the cleaning swab.  You use the swab to sweep from one side to another sensor using almost no pressure.  Eclipse is almost pure methanol, evaporates quickly and leaves no residue.

  You will now be IMMEDIATELY discard this swab.  (this is what I mean about the bit 'wasting money').   There are 12 buffers in a box.  You can use a couple of them to clean the sensor.  They are cheap.  Your camera is not.  Do NOT try to save money on cheap disposable pads and risk damaging your camera - because if this swab picked up a little sand, would you scrape little sand on the sensor by reusing the it.  That's why I suggest using almost no pressure AND why I suggest to use the scope of the sensor to inspect the sensor and see what I'm working with.

  A sensor cleaning is not difficult, and if done right, it is not even dangerous.  But if you take anything to him as you have been cleaning a window, then you could make things worse (and potentially expensive to correct.)  Just go slowly.  Inspect everything.  I ran with the assumption that all which is on the sensor will scratch if I do not pay attention (even if most of the time this isn't true) and very light pressure allows to "tease" the offending bit of dust on the sensor.

  When you are finished, simply turn your unit on and put the lens on.  It automatically closes the shutter when you press the power switch.

• I changed the network settings of 'area' to the 'task force '. Now all (admin too) user passwords are not valid. How can I access my computer?

  Microsoft support suggested to reinstall the system, as the security policy does not allow to reset the admin password.
  From my point of view, their security policy is useless when you get out of HD and put in another machine. All the data is yours.
  My concern is to avoid the reinstalling all software as well as custom settings. Even if you saved all the files of configuration, it may still take some time.

  Hi Novina,

  Please see article about your question:

  http://support.Microsoft.com/kb/317049

  I hope this helps!

• I use Lightroom 5 and all my files are gone.  I have all the pictures, but they are not classified more.  How can I get them back in their cases?

  I downloaded the day before and everything was fine.  Open 5 Lightroom the next morning and all records have disappeared, spill of thousands of photos in "All photographs."  I also can not download for Lightroom more.  I get the message: the following files were not imported because they could not be read.  Thank you for your help.

  A copy of Θcran of exactly what your LR screen looks like might help.

  Do you still have the 'Files' header in the sidebar below featuring "all photographs"?

  What happens if you right-click on the photo and select "go to folder in the library.

  The error message on the new imports you report confusion often really means that LR cannot write where you tell him.

• When file/collection, how can I delete all the related items that are not on my last composition?

  Hello, I have a great difficulty using the file/collection a large file I did months ago, because when I use it, the file is created, but it takes 2.5 to space! compared to others of my works, taking almost 1 TB of files, this one is too big and I think by deleting some files, but I don't want to make a mistake, so I wanted to ask here, if it is possible to take a main composition and only do a file/collection of this composition, objects and elements that serve there (the last I made on my account at least, with the elements used on that, because I think that there are many (if not a large part of them) files and elements that are not used in the final version, as scenes of the version beta of my work, the problem is the composition is too long and have a lot of different archives or drop movies then it could take forever to do it manually...

  Thanks for reading me! I hope that this is a solution...

  It's a two-step process:

  1. reduce your project to the desired composition.

  2 recover your files.

• When I edit all the contacts, my changes are not saved. Why?

  Any change to my contact list (when I update e-mail or postal address changes / phone numbers addresses etc.) editing seems to have worked, but as soon as I get out my address book, change has not registered. Any ideas?

  https://support.Mozilla.org/en-us/questions/996474#answer-561758

• Does anyone know what are the causes for the (!) symbol in red in all my icons of file work?

  Does anyone know what are the causes for the (!) symbol in red in all my icons of file work?

  Most likely your sauvegardΘ (backup status indicator) program, maybe Norton, McAfee or Mozy, indicating the file not saved yet.

• In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.

  I have the same problem with. Recording with my camera JVC Everio MOD files.

  The problem is that. MOD files. All thumbnails of film appears correctly.

  I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.

  Can anyone help?

  

• Does anyone know any reason why my photoshop 3D CC does not work. Cannot highlight the functions, as are gray. I Lion 10.7.5 but all other functions seem to work. ?

  Does anyone know any reason why my photoshop 3D CC does not work. Cannot highlight the functions, as are gray. I Lion 10.7.5 but all other functions seem to work. ?

  upgrade your operating system, Photoshop system requirements

• Does anyone know how to filter all the items in an XMLListCollection?

  I have a tree with the following structure.
  <>node
  < Node1 >
  < node2 >
  < node3 / >
  < node4 / >
  < Noeud5 / >
  < / node2 >
  < / node1 >
  < / node >
  
  I need to be able to filter on node 3, 4 and 5 and then after the filter if they do not exist, get rid of the node 2 level and make then another function to check if the node levels 2 is here and if not filter... then filter node levels 1. Basically it is an ascendant of the filter. Flas 2.0 I would filter base level by removing the knots... then move to the next level and to check if they had children or not... If they did not then I would remove the... and then I would repeat the step for the last level.
  Does anyone know how to do this without having to remove the items from the collection... Basically, perform a filter rather than a deletion. I know that the filter function only returns the first element in the xml structure... which is annoying. If anyone can help me I would appreciate it of course?
  
  Thank you

  I guess that the filtering on a tree passes only in the lymph nodes of the root... It's very lame on part of Flex. Basically, I had to make my own functions to remove the nodes dynamically.
  Remember that this only works on a dynamic array element.
  Delete list ;

  To make this work, I have a main TreeCollection... and that I made a copy. Treecollection.Copy () and deletions of the struct stuff copied. After that the destructions were I made then assigned the copy to the MyTree.dataprovider = copy.

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.

• does anyone know how to get the webcam doesn't work on a samsung sv510

  I can't find the webcam in the programs. I can't make it work, does anyone know how? Help, please

  Hello, Damienmelarkey,

  -Come on in and START then all PROGRAMS, you should see a built in CyberLink YouCam, click on this program.
  -Follow the instructions to register, it's super quick and easy, all you have to do is to register your name and email address.
  -Follow through with the directions from there and it should be operational.

  Locate the manuals, drivers and support forum Samsung

  http://www.Samsung.com/us/support/

• does anyone know why my Security Center can't turn on the only show a message (windows Security Center cannot be started)

  does anyone know why my Security Center can't turn on showe just me a message (windows Security Center cannot be started) what can I do for this?

  If someone help me I thank a lot.

  Hi belizariocruz cruz,.

  ·         You receive an error with the message code?

  ·         What is the operating system installed on the computer?

  This problem may occur if the Security Center service is not configured to run under the Local Service account, but the dependent services are configured to run under the Local Service account.

  Note: The following can be used for Windows Vista and Windows 7.

  Method 1: To resolve this problem, make sure that the Security Center Service and all its dependencies are configured to run under the Local Service account. Set the center of security and its dependencies services to run under the Local Service account.

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log .

  c. Select "this account" click on the Browse button, type Local Service and click ok.

  d. type the password and confirm the password and click ok.

  Method 2: You can run the Microsoft Safety Scanner for any infection by virus. Check out the following link to do the same thing.

  Microsoft Safety Scanner - free online tool for PC health and safety