Does anyone know where heard anything on a tech support company called CodeDefend? If so, are they legitimate?
My system stagnating earlier today after an unsecured site navigation and has been invited to call support immediately and warned to not stop or restart my computer because this would cause it to hang indefinitely. So I called the number that pops up on the screen and got connected to a CodeDefend tech, who has access to my computer to fix my problem, which of course, I had to pay (hoping that I was not scammed). He scanned my computer and found precarious foreign addresses then it downloaded and run both Ccleaner and Malwarebytes and now my computer seems to work very well. I also downloaded the latest version of the system OS Sierra software to improve the overall performance of my system. I tried to do a search on Google of CodeDefend and could not find information or comments about their services. Has anyone here used CodeDefend before, and they are safe to use?
Alex7462 wrote:
addresses abroad insecurities
I tried to do a search on Google of CodeDefend and could not find information or comments about their services.
Pop ups are scamware.
https://www.codedefend.com/page/about.aspx
Giving an unknown entity on your computer is questionable at best.
Tags: Notebooks
Similar Questions
-
Does anyone know where is the "marker to start project?
Does anyone know where is the "marker to start project? Not here, and where it is shown in photos in "help". Use often to start my sessions a few bars before 1 Bar. The "End of project marker" triangle is at the end of my session and 'Help', said that both exist. Thank you!
The beginning of project marker is shown below...
You may need to scroll the window arranges a little to the right of having show itself.
Very important "DO NOT SET YOUR PROJECT START MARKER EARLIER THAN 1,1,1,1"
Doing so brings various undesirable problems caused by a negative project start marker.
Just start your project at the bar 3 or where to leave room for everything what you want to do earlier. Don't forget you can still "enter time" at any time after creating a project to make more room and move the whole project to the right if necessary.
-
My folder of Spindump has ended up in the trash. Does anyone know where it is supposed to be? I want to put it back.
Where is he now?
-
Please help I'm looking for the dowload 10.10 update my dads computer and I can not find it! Does anyone know where could it have?
10.10 is no longer available unless you had previously downloaded. In this case, it would be in the purchase of the Mac App Store section. Its not available for direct plus download.
You can directly update 10.11 El Capitan.
-
I'm looking for the option "Color fades" in the module slide show so I can fade between slides. Does anyone know where it is? Is the colour 'fades' referred to this paragraph:
Fades chained Sets the time (in seconds) of the transition fade between slides.
- To create a transition fade to a solid color between the slides, select the color option fades and then click the color box and choose a color from the pop-up window.
See the page:
Thank you!
The color fades color you're looking for is last in Lightroom 4. It was abolished in LR 5 and beyond. Adobe needs to update their help page to delete this paragraph.
LR4 tutorial includes a color option in the playback area:
LR5 tutorial does not work:
-
In Windows 8, all my video files (is a mod and.) MOD) show a generic icon of MPEG and NOT a preview of the image. does anyone know a fix? All my photos preview very well but the videos are not.
I have the same problem with. Recording with my camera JVC Everio MOD files.
The problem is that. MOD files. All thumbnails of film appears correctly.
I have not had the problem on Windows 7, but my new 8.1 Windows based PC does not display thumbnails for previews. MOD files... but the other movie previews shows correctly. 'Show thumbnails instead of icons' is checked.
Can anyone help?
-
It comes to the help file in the documentation of Visual manufacturing by Infor. I'm curious to know if anyone knows where to find this driver to update the 'create new Data Source' in the ODBC Data Source Administrator?
Creating an ODBC entry
Do not attempt to create an ODBC entry if you not have Crystal Reports installed.Before you can use the user-defined reports, you must create an ODBC entry for the database so that Crystal can access Crystal dictionaries.
The method of establishing new connections ODBC differs depending on the version of Windows that you are running. However, you must use the ODBC Administrator to establish this connection. These instructions describe creating an ODBC entry on a workstation running Windows 2000.
On the start menu, select settings, Control Panel, administrative tools, then Data Source (ODBC).
The ODBC data source Administrator dialog box appears.
Click the user DSN tab.
Click the Add button.
The dialog box create a new Data Source appears.
In the list of drivers, select CR SQLBase, provides a Crystal Reports driver.
If you are an Oracle, SQL Server or DB2 user, select the starting driver by CR and ends with the name of the appropriate database.
Click the Finish button.
SQLBase of ODBC driver dialog box is displayed.
In the Data Source Name field, type LSA SQLBase Dictionary.
If necessary, enter a description for the DSN in the Description field.
Enter a default database in the database field. It is the name of the database to which you want to connect by default.
Click apply to confirm these settings.
See also
User-defined help
Sad that it's my user found the file I was looking for here.
-
does anyone know when the web link for the CF mx dowload version is new. I just wanted to test my PC C drive thank you
Try here Center of Support of ColdFusion
Phil
-
HI, does anyone know if/how/when/ReadyNAS would be able to support authentication 2nd factor, with either a YUBIKEY with Yubico OTP, oath HOTP, oath-TOTP, Challenge Response, FIDO U2F or Google Authenticator, and if ReadyCLOUD and the physical ReadyNAS are already supported Yubikey, can someone point me to some documents on how to apply please. (preferably want to use FIDO-U2F) ReadyNAS OS 6.5.0, RN314
Hi dionuk,
Your idea to improve the safety of the product is very much appreciated, and we thank you for sharing your interest in it. I suggest that you post this idea to the Commission for the exchange of ideas.
Kind regards
BrianL
NETGEAR community team -
It was the ringtone as the default for my old Storm, but for some reason, is not present on my Torch.
You know what it is - you like the same ringtone (and defo not a crap song, or anything too cheesy in the workplace) and the original BB single ring ringtone distringuished you like a BB user by an opposition to the typical Nokia or other combined cycle.
Where is he past? The closest I can find these days is "VITAL" on my torch... where is the original. Can I download on my handset from somewhere?
Well, copy the two files and see where that you take.
Have you tried to access this folder from your device when you are always connected in mass storage mode? If so, unplug it and see if you can find it then. You can't have your card from your camera in mass storage mode.
-
Does anyone know where / why APEX uses the CLIENT_IDENTIFIER internally?
I am trying to share a global CONTEXT, but I can't get this through sys_context (...), if I change the CLIENT_IDENTIFIER or clear it with: dbms_session.clear_identifier () in the APEX;
The CLIENT_IDENTIFIER is defined by the APEX for each cycle DISPLAY-SUBMIT to "< APEX_USER >: < SESSION_ID >.
I can't change, but I guess that there is a purpose behind it. Nobody knows, and doing a risk during erasing it in my code? ... of the problems elsewhere
Thank you very much
-ThomasHello
Apex sets the CLIENT_INDENTIFIER so that it does not exist in the dynamic view V$ SESSION and you know what Apex user/session, the database session is processing. Apex also defines the ACTION and the MODULE so that you know who asked the apex and the page treats the database session.
Rod West
-
Does anyone know where and how to order a new battery for an A1-810 android Tablet acer?
Hi, I have to contact acer on this subject and order online, or can I go to any electronics store which is certified by acer and buy the battery, my battery is not bad or anything, I just want to kow the information in advance, just in case.
Hello gendrake93,
The reference numbers of the battery for A1-810 Iconia Tablet below:
KT.00203.004 - BATTERY.2C.5280MAH
KT.0020G.002 - BATTERY.2C.5280MAH
It is better to buy certified Acer dealer (eshop or shop). The compatible do not always have the same life cycle. But cheaper...
-
I know how to disable it here: chrome://settings/contentExceptions#ppapi-broker
I need to be able to withdraw all together but otherwise I can't really the installation process for the video.
see you soon,
The location on a Windows computer is: C:\Users\{UserName}\AppData\Roaming\Macromedia\Flash Flash \bin\adobeconnectaddin www.macromedia.com
-
Glass icons, does anyone know where to find!
Hi people,
Be very lazy I know but someone has a source for icons of glass round, transparent, effect?
I have social networking ones, but impossible to find a game that also has a phone icon and email.
I'm after;
A phone icon, email, twitter and facebook.
All must be round and transparent with a magnifying glass effect.
I have my usual sources, but have sought for centuries to those miss me.
Thank you.
I realize that. In the dry icons site, the game of Coquette are honest and have 6 or 7 games. I don't know there's a Twitter one in there, but I don't remember if there is a Facebook. You don't know why they make those social in different sets. I agree, they should probably be together. I found social sets that go with the Coquette series, so good luck. Sometimes I had to make my own version of social games. Sorry I couldn't be more helpful.
Dee
-
Does anyone know where to find parts for my mother Alienware R4 card number
I broke my motherboard and needs to be replaced, but I confused what my number of parts for my motherboard. Where can I find it? Thank you
Sorry, my mistake.
I think this part number will also.
7JNH0 or 07JNH0
Maybe you are looking for
-
Noticed that PDF Viewer PDF. JS is not compatible with Firefox version 35 and more.Then why not delete it?Wine
-
Satellite Pro L650 - ODD cannot burn DVDs
I can't burn DVDs. That is to say to ensure that I have the latest firmware I checked and do but still does not work please help
-
Satellite L450D - what HARD drive I can use?
Will try a hard drive to a desktop pc in the present, going to work or laptops have different hard drives?
-
You will have to taste PSC-HAVE-110 modules of 20 hz.
Hello I am trying to enjoy and to capture in a file of data entered on a PSC-HAVE-110 with a controller PSC-210. I have a loop that makes a FP reading every 50ms. The data file is updated every 50 ms, but the data does not change for each channel f
-
Automatic updates of Windows installs KB979683, and then in the next update checking, it is listed under "important update available". He repeated every day for three weeks. Under 'View Update History', he shows again and again KB979683 installation