Does Satellite C660-1 p 3 no signal HDMI on TV using a higher resolution

Similar Questions

• my keyboard mouse on my Toshiba satellite C660 laptop will not move. Im having to use my wireless mouse.

  would it be a virus, and my internet keeps disconnecting and then reconnecting.

  Hi barbhog,

  When was the last time you ran a virus on the computer scan and what were the results? You see other issues of performing with the hardware on the computer?

  Let us ensure that the touchpad is not disabled. Is there a somwhere or the switch on the front or the side of the laptop that might have been put in power? If not, you can try to go into the BIOS and check if it has been disabled it.

  To do this:

  Start by pressing F2 or F10 when booting. You will see a flash at the bottom of the start screen option in the BIOS.

  Once in the BIOS, go to 'Advanced' highlight the property system > keyboard and mouse features or options of the unit and press ENTER.

  Find the internal pointing device and pass from disabled to enabled.

  I hope this helps. Just reply to the results.

• Can satellite C660 - 11K - I Add Bluetooth?

  Hello

  I have a C660 - 11K and I understand that this laptop doesn't have a bluetooth technologicalinbuit (can't think why, so it would be useful to have instead of all these different cables for all my bluetooth devices) in any case, is there a way I can add this to my laptop?
  I am running windows 7 Home Edition.

  Thank you

  Hello

  Satellite C660 is not equipped with Bluetooth, but you can use an external USB dongle to Add Bluetooth functionality. These external USB dongles, you can get to 10 to 20 euros and should be available in every store of the computer. :)

• How to connect by Satellite C660-26Z to TV?

  My laptop Satellite C660-26Z doesn't have a HDMI port plug,
  so, how can I connect a laptop cable to use my TV screen.

  Maybe, I need to use decision-making (VGA) port external monitor on my laptop with a special connection cable? Let me know, thank you, Terry.

  Hello

  It depends on the available TV ports.
  Check the ports that are supported by the TV. Recommend to read also the TV manual for more information on the available ports.

  Fact is that this laptop supports just a RGB (VGA) output port. No HDMI or DVI port is available. So you can use just a VGA cable
  Now the question is which port can be used as part of VGA cable.

• Replace the screen for one with a higher resolution on Satellite P850-12Z

  Hi all

  I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

  Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

  I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

  I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

  Thank you in advance.

  Hello

  Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
  I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

  You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

  All this is quite complicated.

• Toshiba L 40, 6353 - no signal HDMI using other input sources

  I have toshiba L 40, 6353 and strange problem with toshiba and my cable box.
  On my previous LCD, I had no such problem.

  If I turn off my TV or change to another source of entry for longer then 5-10 minutes and return to the HDMI from my cable box I get the message "no signal". I have to turn my stb or unplug hdmi and taken back to return to picture.

  The decoder is not a problem because on the other TV it works fine.
  I can always change the channel on that (display on the stb itself) but my toshiba led displays no signal.
  I have my PC connected to an hdmi port and do not have this problem

  So far I have tried:
  to connect my cable box to each of 4 ports HDMI and the same issue.
  to disable the power management feature everything related to extinguish. Even 'turn if no signal' for each port individually.

  any ideas?

  I have Toshiba 40 TV but the other model. I use STB too and two other HDMI ports for Blu - Ray player and my laptop.
  Everything works OK and I'm happy that I don't have this problem HDMI on my TV.

  It is unclear to me that there is something you can change in the settings. Have you tried to test the functionality of HDMI ports by using another high-quality HDMI cable or other external devices such as a DVD or Blu - Ray player?

  It will be interesting to know if problem occurs with the use of your decoder only.

• Satellite C660 keyboard does not properly - multiple characters

  Hi all

  My keyboard does not work well.
  There is a keyboard lag and sometimes several characters are typed.

  Model is Satellite C660-PSC0SG - 01300L...
  Update the BIOS, I saw in a lot of forums but I could not find.

  Some ooone could help on this...

  Traorepaul,

  Naveen

  Hello

  You are right!
  The update of the BIOS could solve this as mentioned in this document from Toshiba:

  + Questions with the Satellite and Satellite Pro L670 & C660 series laptop keyboard +.
  http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

  Click on the link to the download page of the BIOS in this doc.

  Here you will find a BIOS update instruction:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

  Good luck

• Satellite C660-11W - Num pad does not work

  Hello!

  I have a Toshiba Satellite C660-11W, which I bought 10 months ago. Since October, the num of my laptop keypad does not work, but when I press the "Num Lock" button, it makes a noise as I had turned on the StickyKeys.

  How can I solve this problem?

  Hello

  Looks a bit bad operation of the keyboard.
  I think that the service technician if you want to initialize the digital keypad function by Test & Diagnostic software and will replace the keyboard to fail the test.

• Re: Satellite C660 - 1 M 0 - battery does not work long

  I have a new Satellite C660 - 1 M 0, and after using it for a week, the battery does not as long as compared to the first time that I used it.

  I heard that a charge of initial battery life of 8 hours is required before the 1st use. Is this true?

  Hi richardvdoran,

  The battery time depends on usage and what you do. For example if you run a large number of programs and work with a high CPU utilization low autonomy and requires AC adapter / CC soon. Also surf the Internet needs battery power.

  You can improve the battery life if you use the eco mode power plan. This will reduce the brightness and other things to improve the battery life.

  First battery charge time may be 8 hours but that's different and according to other things.

• Satellite C660 - 1 M 0 - FN does not work

  I have a laptop Satellite C660-1 MB. My FN key does not appear on the top of my screen.
  I tried to uncheck that the "function key all disable them" under the map flash but it still does not.

  I hope you could help me guys.
  Thank you.

  It works in the home premium to Windows 7. Will this fix if the system restore is installed?

  The menu Flash card may appear at the bottom or top of the screen. It depends on the settings you can change in the settings of Flash Card Toshiba (all programs-> Toshiba-> Utilities)

• Satellite C660 - new internal keyboard does not work

  Hello

  I'm completely stuck I have a portable satellite c660 keyboard did not work.
  So I bought a replacement keyboard and installed and checked in the Device Manager and it says it is there and works correctly, but the replacement keyboard still does not work.

  I updated the bios and uninstalled the keyboard drivers and reinstalled them that I've done everything I can think off to try and get this new keyboard working but I am having no luck and could so with some assistance.

  Have you ever checked if the USN external keyboard works properly?

  I ask because in the case where the external keyboard does not work properly, the internal keyboard problem could be related to faulty keyboard controller (motherboard) or a problem of system m.

  In case the external keyboard would work properly, you had any luck with the new keyboard. It might be possible that the new keyboard is malfunctioning.

• Satellite C660 - the SHIFT key does not work

  Hello

  I have a problem with a Satellite C660.
  The keyboard, I cannot use the SHIFT key. After you have installed windows everything worked properly, the problem recurs after a few days. Practically the SHIFT key does not work.
  On the one hand I'm the A and the other side works like ESC.

  Help me I'm crazy.
  Thank you.

  Hello

  To me that sounds more like a keyboard failure, I can't imagine that it could be linked to the question of the windows operating system do you have tested an external USB keyboard.

  Please test this. In this case, you can check if it s really a software problem.
  If the USB keyboard works correctly, it means that your internal keyboard is malfunctioning.

• Satellite C660-B080 - FN key does not work with Win 7

  Hello

  My laptop model is' satellite C660-B080 & only part no = 'PSC0SV-02G01JAR' with windows 7 Ultimate 64 bit SP1

  I downloaded the driver from the website, but the FN key does not

  Please help me with this.

  Thank you

  Must be installed:

  -Value Added Package for Windows 7 64 bit
  -Flash utility Cards with support for Windows 7 64 bit

  These two tools are located on the Toshiba driver pages.

• My Satellite C660-1UJ does not start

  Hello people,

  My laptop Toshiba Satellite * c660-1uj starts up.

  It does nothing when I press the powerbutton.
  When I connect the poweradapter I hear a clicking sound, as it is with or without the battery and I also see the light (led) battery flashes green.

  I think it has something to do with my motherboard, but I'm not sure.

  I would like to be sure before you buy a new.
  Does anyone know where the problem is and how to fix it?

  Thanks in advance.

  Kind regards

  Sjoerd

  > I think it has something to do with my motherboard, but I don't know.
  Yes, I think that this problem could be related to problems of motherboard.
  But this would be the worst case, given that the new motherboard is very expensive part I gues guarantee is not valid?

  But why you put the memory t-test? Faulty RAM memory may prevent startup laptop and power. Replace the RAM module is not very difficult.

  Of course, you would need to buy new modules for verification, but maybe you could visit some technicians computer/laptop to downtown who could test the device with new RAM modules.
  In this case it would be pointless to buy the parts for testing purposes only.

• The function in my Satellite C660 key does not work

  The function in my Toshiba Satellite C660 key does not work except volume.
  This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

  Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

  Remove the preinstalled version, restart your computer and install the latest version.
  After doing this it works again.