Domain redirection with mask

Hello

I recently bought a domain which is hosted by GoDaddy. When I send my application the domain APEX forward like asked it when there is no masking. But if it is masking, which is what I want, the page returns a blank page. I don't know why this happens, any suggestion would be great.

Thank you. @apex

Not sure how your "masking" really works. If it uses iframes, you can set 'Embed in Frames' on 'Allow' in your security settings for Applications.

Tags: Database

Similar Questions

  • Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never

    Hi there from Hamburg/Germany. Since the last two updates of the CC, Photoshop crashes 95% when I work with masks. This gets really annoying when you know that I have about 120 photos to retouch to a customer. Any ideas what's happening here? Never had this problem before. Now, every time I create a layer mask, or try to work on a Photoshop freezes completely, forcing me to restart and (most of the time unless I have record EACH step) start of a scratch. Which is pretty much annoying... any suggestions?

    Move on to the Discussion of Photoshop

  • Problem with mask in mask with mode GPU on a HTC m8

    Hi, this could be an old bug, we see a problem with AIR 15 and 16 on only this phone HTC Android (4.2.2) newish special. Our app uses GPU renderMode. The problem occurs if you have a MovieClip that is hidden with children who have children who are also hidden, so only the first hidden child renders. Also, make all other objects that are not hidden but if one of them has a mask, then that has not been made. This problem will not occur on an older One X HTC and HTC Desire 610 running the same version of Android (4.2.2). He can't get on Google Nexus 4 or iOS.

    Thanks for your help!

    Hello

    There is a work around for this problem.  If we set cacheAsBitmap (this.cacheAsBitmap = true ;) property children hidden to true, then all children hidden will make correctly gpu mode.

    Determination of the sample application even with changing respective to solve the problem of Bug #3921039 - problem with mask mask with mode GPU on a HTC m8 . Inviting you to please publish the application with the method mentioned on your device for which this problem occurred.

    Note:

    The following documentation on the gpu rendering mode - http://help.adobe.com/en_US/as3/mobile/WS901d38e593cd1bac-3d719af412b2b394529-8000.html States that: "the GPU rendering is more restrictive in mobile AIR applications built with the packager for iPhone." The GPU is effective only for bitmaps, solid forms and display including the cacheAsBitmap property defined objects. "

    Please let us know in the case where you are still facing problems.

    Kind regards

    Adobe AIR Team

  • Savings with masks of tact

    Savings with masks of tact

    Sorry for the second post today, but I guess that synapses aren't firing very well today.

    -J' using CS4 on a PC

    -J' have a photo I shot in RAW and converted to a jpg by the Image Processor in Bridge.

    -J' did some masking and saved as a psd. I thought I had this dome before so I could save my work, maybe close and re - open the file later to work on it more.

    -Here's the dilemma - the mask is not save. -If I initially save the file as a psd, a work on it and go to 'SAVE' this option is not available. I tried to save other file formats but no cigar.

    -Then there must be something I need to do.

    -The Mode is 8-bit RGB color.

    Thanks in advance for any help.

    OK, there is nothing wrong with Photoshop. What you have in these two screenshots aren't active selections, masks. If you want to save your selection and then use select-> Save selection. When you save files with recorded selections that the box of the dialog box save as Alpha channels must be selected

    Save and load selections:

    http://help.Adobe.com/en_US/Photoshop/11.0/WSBB7A7447-383c-40E3-971F-88F5AB2DCB6Aa.html

    About layer and vector masks:

    http://help.Adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7866a.html

  • Working with masks in CS4 (Windows)

    I work with masks in CS 4 and use the brush to create a mask of several parts of my picture. How can I configure my software so that the part I'm masking appears on the screen that I paint, instead of just the area of mask on the adjustment layer?

    Not sure I understand your question, but the typical process if you are using an adjustment layer, who appears with her own mask, is as follows:

    Open your mage and this seems to be your background layer. Click on your desired setting (say, hue/saturation, for example) and and make the changes you want. The image on the screen reflects those changes across the image. Now, select your brush tool and set its characteristics, be sure that the foreground color is set to black, make sure that the adjustment layer is selected (not the background layer) in the layers palette and make sure that the mask is selected in the adjustment layer by clicking on the thumbnail of the mask. Using your paint brush the areas to protect the adjustment. The painted areas will return to their original aspect of the hue/saturation and the corresponding surfaces becomes black in the thumbnail of the mask.

    I hope this helps.

    Paulo

  • Redirect with wrong IP or SCAN HEADPHONE PORT.

    Hello guys.

    I will try to be as brief/clear I can. I've been struggling with this problem for a few months now, and yet, I couldn't find a solution and more I tried everything (or at least, that's what I think).

    Scenario of: *

    < Li > node cluster two
    < Li > Oracle CRS and DBMS 11.2.0.3 (power SUPPLY 5 block has been applied to the GI)
    < Li > several databases created on this subject, all the 11.2.0.3.
    LISTENER_SCANs < li > three
    < Li > a local LISTENER by node
    < Li > SINGLETON and UNIFORM services (I'll show you example SINGLETON).
    Mode SHARED server, < li > three dispatchers on random ports. NO, I don't have a firewall problem :)
    B < li > SERVER with LISTENER_SCAN1
    < Li > SERVER A with LISTENER_SCAN2 and LISTENER_SCAN3

    What I want to do? *:

    Connect to the SINGLETON service using a SHARED and of course server using the cluster name (SCAN).

    What is the result? *:

    < Li > IF I use the name of the cluster (cluster.domaine.com) some time, the connection works, sometimes fails.
    < Li > IF I use the LISTENER_SCAN running on the server running the service SINGLETON (B), connection is successful.
    < Li > IF I use the LISTENER_SCAN running on the OTHER (A) server, the connection fails.

    LISTENER-SCAN3 server log has*.
    04-APR-2013 14:05:37 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=bogdan))(SERVICE_NAME=dbname_srv_s)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=bogdan))) * (ADDRESS=(PROTOCOL=tcp)(HOST=bogdansIP)(PORT=58611)) * establish * dbname_srv_s * 0
    04-APR-2013 14:05:39 * service_update * asuadev4_2 * 0
    04-APR-2013 14:05:40 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=bogdan))(SERVICE_NAME=dbname_srv_s)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=bogdan))) * (ADDRESS=(PROTOCOL=tcp)(HOST=bogdansIP)(PORT=58613)) * establish * dbname_srv_s * 0
    04-APR-2013 14:06:38 * (CONNECT_DATA=(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=bogdan))(SERVICE_NAME=dbname_srv_s)(CID=(PROGRAM=JDBC Thin Client)(HOST=__jdbc__)(USER=bogdan))) * (ADDRESS=(PROTOCOL=tcp)(HOST=bogdansIP)(PORT=58624)) * establish * dbname_srv_s * 0
    Of Wireshark, I get this*.

    I tried to sniff packages to see what's happening and what I get is a REDIRECT to LISTENER_SCAN3 IP (running on A) with the port of the splitter that runs on server B.
    Redirect Data: (ADDRESS=(PROTOCOL=tcp)(HOST=x.x.x.241)(PORT=56270))
    Redirect Data: (ADDRESS=(PROTOCOL=tcp)(HOST=x.x.x.241)(PORT=9317))
    Redirect Data: (ADDRESS=(PROTOCOL=tcp)(HOST=x.x.x.241)(PORT=50045))
    bash>srvctl config scan
    SCAN name: cluster.domain.com, Network: 1/x.x.x.0/255.255.254.0/bond0
    SCAN VIP name: scan1, IP: /cluster.domain.com/x.x.x.242
    SCAN VIP name: scan2, IP: /cluster.domain.com/x.x.x.243
    SCAN VIP name: scan3, IP: /cluster.domain.com/x.x.x.241
    
    bash>crsctl status res -t
    ...
    ora.LISTENER_SCAN1.lsnr     1        ONLINE  ONLINE       B
    ora.LISTENER_SCAN2.lsnr     1        ONLINE  ONLINE       A                                      
    ora.LISTENER_SCAN3.lsnr     1        ONLINE  ONLINE       A   
    ...
    ora.scan1.vip               1        ONLINE  ONLINE       B                                     
    ora.scan2.vip               1        ONLINE  ONLINE       A                                      
    ora.scan3.vip               1        ONLINE  ONLINE       A  
    ...
    Status of the database and services*.
    ora.dbname.dbname_srv_s.svc     1        ONLINE  ONLINE       B                                     
    ora.dbname.dbname_srv_u.svc     1        ONLINE  ONLINE       B                                     
                                    2        ONLINE  ONLINE       A                                      
    ora.dbname.db                   1        ONLINE  ONLINE       A                 Open                
                                    2        ONLINE  ONLINE       B                 Open 
    Some settings*.
    NAME                   SID        VALUE                               IsSpec
    ---------------------- ---------- ----------------------------------- ------
    dispatchers                  *          (protocol=tcp)(dispatchers=3)       TRUE
    local_listener               *                                                 FALSE
    max_shared_servers           *          500                                 TRUE
    processes                    *          2000                                TRUE
    remote_listener              *          cluster.domain.com:1521    TRUE
    sessions                     *          445                                 TRUE
    shared_server_sessions       *          100                                 TRUE
    shared_servers               *          40                                  TRUE
    What ports are open tied to dispatcher processes*.
    tcp        0      0 :::56270                    :::*                        LISTEN      1356/ora_d000_dbnam 
    tcp        0      0 :::9317                     :::*                        LISTEN      1361/ora_d001_dbnam 
    tcp        0      0 :::50045                    :::*                        LISTEN      1368/ora_d002_dbnam 
    I would like to know if you need aditional information thank you very MUCH for any help you can provide me.
    Alex.

    Levi.

    I just noticed I have not updated in this topic. I'm really sorry.
    The problem is finally solved!

    It's a major problem within the company, but the thing is, we have different environments with different configurations and teams taking care of so many miss communication that's happened.

    Basically, Prod and Cert have Firewall with open ports (that's the dispatchers/dispatchers and so). I asked team on the network firewall that we have and they say that we had no restrictions I stop just a matter "firewall." That as my mistake.

    Not to mention that we have not all restrictions on the firewall, we have, there are certain characteristics which, after a long period of investigation at the networking level (using Wireshark to read the packets and see the results of the redirection, among other things), we could see that some thing in the middle was ruin it.

    That was, "SQLNet Packet Inspection" enabled by default! I had to disable it and everything started working after that.

    Of course, Oracle Support did not help AT ALL which is really bad, because we spend a lot of money on support. I told her about the firewall at the end and they say 'contact your network management team' rather than provide an any clue on this question.

    Anyway, thanks a LOT Levi for your dedication to my problem.

    Thank you for the Uruguay.
    Alex.

  • domain redirection

    How do redirect you a domain with Adobe Muse?

    Hi there-

    You will need to redirect your domain name using the customer of hosting domain that you are using. Muse can interally redirect a domain name. Try following the steps below, as shown in this tutorial will live created by Business Catalyst:

  • Automatically redirected with the message "setting have been changed."

    A few weeks ago, a friend, I have linked to a router(RT-N12D1) from ASUS on IP 192.168.1.1 and now no matter where I am whenever I browse to 192.168.1.1I get redirected to a page that is display in the attached file, even if I don't HAVE to connect to the RT-N12D1. I try to connect connected to a Ubiquiti device with the IP address 192.168.1.1 or (default) and my system is set to a static IP address of 192.168.1.5.
    I deleted cookies and history, rebooted the system and uninstalled / reinstalled FireFox with the same result.

    Any additional recommendations will be appreciated.

    Concerning

    The problem was solved by going in Open the Menu > Options > Advanced Offline Web content and data Web . He had listed 192.168.1.1 so I deleted and now its work.

    This means that when Firefox has been uninstalled it does not erases all its parameters as I expect.

  • Can I use my own domain name with mozilla thunderbird?

    Is there any way to change @mozilla... to something else?

    Where are you seeing @mozilla? Thunderbird is not a provider of e-mail and does not deliver the e-mail addresses.
    This is an e-mail client and can check email in the private domain, if you have an address with an email provider.

  • Can I update my Firefox if I have problems of redirect with the current version?

    Normally I would wait until things have been fixed, but not having any luck finding is not a solution and a number of sites are grumbling to me to still use the old version.

    Well, for my part, got tired of waiting for an answer and did the only thing I knew to do.
    First of all, I did a thorough scan of all drives with the latest definitions of virus/parasite and knew things were clean this way before you uninstall and re-make Firefox from scratch.
    Then I saved my favorites to .html and did an uninstall complete the old Firefox and didn't use the option to save my old settings, etc. (encrypted I would rather Redo from scratch that the chances of saving a part of my problem now.) After I had uninstalled, deleted the Firefox subdirectory in C:/Program Files and made a boot cold I advanced and installed a new version of Firefox, did the settings for my taste and import my favorites.
    All looks good after a number of cold and hot, boots so guess I cured the problem. I suggest you do this too and do not recommend that do you a simple update that may well leave the intact redirection problem. No evidence of this, but not worth the possibility for me. Good luck to all of you who take this route!

  • Folder redirection with offline files folder

    I have the documents users and Favorites redirected using folder redirection GPO records. So, everyone has their data redirected to the server. With the always available offline function. Then my raid that crashed and this player become offline. after 24 hours everyone back their local copy of their records.

    Now, why was it around that time. The server used to host the files fell to 2-3 hours. Later, I had the server upward without the Raid.

    Also 2 users reported that they can see their files, but its greyed out with an x and cannot access it. Discovered they still had available disabled offline. Don't know how that happened.

    So now I'm going to add a new server with the same name and follow the direction to create the folder and share it according to

    http://support.Microsoft.com/kb/274443/en-us

    Q 1 what happens when this folder where the user used to redirect their files and now its empty. will redirect all the files the

    2 Q if it does not work how can I get users local copy available immediately with waiting for so long.

    Thank you

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.technet.Microsoft.com/forums/en-us/home

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Port redirection with pix

    Hi, I am trying set up port forwarding on a PIX 515 running version 6.3 (3) and nowhere fast.

    The idea is to redirect the traffic from port 25 to port 2525 and the static command, I tried is as follows:-

    static (inside, outside) tcp 25 X.X.X.X Y.Y.Y.Y 2525 netmask 255.255.255.255 0 100

    Where X.X.X.X is a public address and Y.Y.Y.Y is a private address.

    Also, I added a line of the access list to port 25 for incoming host X.X.X.X.

    The redirect does not work. I even went as far as the test on a web server, forwarding port 80 to 8080, but traffic is sent to port 80, regardless of the static command.

    Can someone please tell me what I'm doing wrong? My understanding is that the port redirects were possible with the later pix 6.0 or version software.

    Thanks in advance,

    Rick

    No sweat. I almost always overlook the simplest things so when someone else has a problem, I start easy and move up. Usually solves the problem more quickly.

    As for your other question, Yes, it is normal. Remember that static is bi-directional translations. Thus, when you added the port information in the static command to the SMTP server, the PIX only knows now to translate packets from TCP/2525 (I think that's how you had it). When your mail server tries to send outgoing mail, the source port will be an ephemeral port (IE not 2525 probably). So, I usually people do something like this:

    static (inside, outside) tcp 1.1.1.1 25 10.1.1.1 2525 netmask 255.255.255.255

    NAT (inside) 2 10.1.1.1 255.255.255.255

    Global 2 1.1.1.1 (outside)

    It takes care of everything in both directions of the 10.1.1.1 host (for example).

    Hope that this helps explain the issues. Good luck.

    Scott

  • Help with mask path

    Hello

    I'm doing a chart of movement with a chain of animation (on a bike). I have a link in the chain moving through a mask path, but is there a simple way to get more links on the same way, so it looks like a real channel?

    Tell you what, here's a creative approach. You can use the path of the text to move the letters around the trail. It can be o (the letter O) you can write several times and use path as your offset margin. pretty neat and elegant, if I say so myself.

    And it's NOT ALLl! Call now and with free bike chain you also get a free flexible range of changes on the fly. you are not bound the mask of collage of copy to position all over again if this path suddenly do it it not!

    Of course, it has its limits. can only use fonts (Hey, wingdings is pretty nice right?) you can even set your icon as a font using this kind of service: creator of font and once you like a font with your symbol, the sky is the limit.

    There is also this script: BAO mask brush - aescripts + aeplugins - aescripts.com much more affordable than newton and specifically for the use of the creation of symbols around a path. Check out 00:38 BAO mask brush Quick Start on Vimeo

  • Problem with mask effect Gaussian blur

    Greetings! I've seen discussions where people had various problems with the following mask in Premiere Pro CC, but I had not seen this issue discussed, so I hope it's just a user error.

    I have a video where I need to blur the faces of several people in it.

    1. I applied Gaussian blur effect to the clip and used the tool free draw draw around A person's head.
    2. I have enabled the button animation next to the mask path label and then played the clip for some time.
    3. Then when his head would move out of the effect mask that I created, I would pause, add a keyframe and click and drag in the middle of the blue mask, that I had done in the program monitor, dragging on his head.

    Everything was fine. I did this several times.

    Then finally I suspended and made a keyframe, and suddenly the blue lines for the mask disappeared! You could still see the effect, but I could capture the effect is more and adjust it.

    Anyone has an idea why the blue lines for the mask suddenly stop appearing in the program monitor? This has happened several times, and I can't understand what the problem is. Thank you!

    Furthermore, I had already tried the mask tracking tool and he was not coherent enough, that's why I'm doing it manually.

    Select the mask in the Panel for the outline to show effect Options.

  • Problems with the Folder Redirection with Persona management, discovers 6.2.0

    Hi all

    I use Persona configuration management to the top of the folder redirection. Office, Documents and bookmarks are copied to the location redirected when you first login. When the user connects again, persona does not load these elements in the redirected folders, but creates rather their local copies. It's strange.

    Any suggestions would be greatly appreciated.

    Kind regards

    Loc.

    Thank you h3nkY,

    We have set up the Folder Redirection in our environment finally! It works for all except for users who are members of domain admins. This is a limitation of view Persona. In addition, who move document/records existing Persona to redirected folder was transparent without any downtime.

    Best regards

    Loc7.

Maybe you are looking for