Don't have a motherboard - > new motherboard + upgrade version of Vista problems ==

Similar Questions

• How can I reinstall Windows XP? I don't have my OEM of Windows ME records. I don't have my Windows XP to upgrade the disks I got the OEM. It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.

  How can I reinstall Windows XP?  I don't have my OEM of Windows ME records.  I don't have my Windows XP to upgrade the disks I got the OEM.  It was a free upgrade to Windows XP with my purchase of the computer with Windows Millennium Edition.

  I'm sorry, but you will need a Windows 9 x / ME drive to provide during the XP installation from the XP disc is a version upgrade. There is no way around that. See if you can find a friend with an older operating system disk (not a recovery disk) to support qualification. Otherwise, you would need to buy the full version (not upgrade) of XP to install on the computer. MS - MVP - Elephant Boy computers - don't panic!

• Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I cannot ope

  Ive bought and downloaded adode acrobat Pro DC and its now asking me for the previous issue. I don't have it. He told me to uninstall the previous version of adobe so I did I don't have the password for the trail version more. How can I fix? I can't open any pdf on my computer now.

  Hi brets49833316,

  If you have purchased Adobe Acrobat Pro DC as an upgrade, then a serial number of the previous version which you have like Acrobat X or XI. If in the case where you have not bought one of these in the past, then you must buy Acrobat Pro DC as full version (US $449.00).

  In this scenario, you can return the version upgrade and purchase the full version. To return the Contact Customer Service

  Thank you

  Abhishek

• How can I perform a new installation if I don't have an installation or a backup disk. Vista is on my laptop when I bought it and there is no installation disc.

  How can I perform a clean installation on a laptop if I don't have an installation disc? Vista Home Premium was already installed on the laptop when I bought it. Somehow, all of my documents have disappeared and by clicking on the icon start shows not all programs as it did before. The only way that the broadcast of programs is by placing the arrow on "all programs". How this can be corrected and how do I recover lost files?

  Hello

  you do not say what led to losing you your documents

  This would apply to you? :

  read the information at the bottom of the below link about what makes this malware hide your data files and the cure for it regarding

  Read article 17

  http://www.bleepingcomputer.com/virus-removal/remove-Windows-Recovery

  also follow the correct for that malware removal steps, just to be safe, let's

  _____________________________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _____________________________________________________________

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Try to restore the data file, get error 'you don't have permission to save in this location"in Vista

  I am new to Windows Vista, but relatively competent in older versions. I installed the software on my new desktop computer. I am the only user on this computer and I have administrative rights. I installed the software in the Program Files directory. In the software, there is a folder for the working data file. I now try to 'restore' my data on this new computer file so that I can start working. I get an error message that says "you don't have permission to save in this location. Contact an administrator. "I have considered similar questions on this site and followed the advice to take possession of the file without success. I also created a new folder on the D drive, thinking maybe Vista I just wanted to keep C clean, but it gives me the same message. I can't save to the folder I created. Any advice?

  Program Files is a protected directory. If possible you create the working folder for the data in your user account instead. Is it possible in the options of the program the program in a directory of your user account? Or, if you think that any other user you may need to use this program, you could create the directory Public. MS - MVP - Elephant Boy computers - don't panic!

• 9790 blackBerry smartphones don't have load not (new unpacking)

  Tried to read all the forums. But it will not load. No laptop or the wall charger. No red light no lights, nothing. It has been 2 hours up to now, can I have a problem with the battery of the phone? I've never had this problem with my Curve 8520 when it was brand new, I just plugged into the wall, and allume turned on at the same time, then let it charge overnight.

  Is this a fault with all the bold, I saw this question posted many times, but usually for a phone that has been used quite a bit.

  HMM. SOLVED. For the time being?

  WHAT I DID:

  Took the cover on the back, put my nail between the bottom of the phone and battery and battery pushed up so that the top of the stack was closer to the top of the phone/the battery connector terminals. There his work, lit so far and its load. I hope this isn't a design defect where this problem will be back often. Design defect being that there are too many game/room where the battery in the phone that it loses its close connection to the terminals. Will transfer if anything else develops. For now, I'll turn off let it load for the day before I turned again to continue setting up and move my 8520 to it.

• This may be a very stupid question, but I don't have the "button new tab" displayed on my tab bar. Can you advise me how can I enable this feature? I've searched around, but I am unable to find any ifo. on that. Thank you, Terry

  I just want to know how to get the "button new tab" displayed on the tab bar.

  Try this:

  View > toolbars > customize

  and see if the 'New tab' button is there. If this is the case, make it slide and put it anywhere you want.

• should I have the product key to upgrade xp to vista

  My wife son died and she got her computer but no cd has no product key for xp install.do, I need a upgrade product key to custom computer Vista.the built.don't where he is a few years old. Thank you

  Just create an Image backup of XP (before you upgrade) on an external USB drive. Then, whenever you may need to reinstall just Vista restore XP using the Image backup.

  (I think you'll find that Windows 7 is a better choice then Vista in the transition from XP to a newer version of Windows).

  Also if it built the computer then you will find the product key using a key finder utility. Download and run one of the utilities listed below.

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  Displays your Windows XP, Vista or Windows 7 key.
  However may not detect a key to office, then try one of the other two listed below for office key).

  Also: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and: http://www.magicaljellybean.com/keyfinder.shtml

  One final note: after you upgrade to Vista or Windows 7, you will have to install the device drivers. Go to the web site support motherboard manufactures, locate the correct mother by part number, download the appropriate drivers for Vista or Windows 7 to a folder, copy it to a USB flash /thumb. Then install after the upgrade.

  J W Stuart: http://www.pagestart.com

• I don't have the option extract in my version of Dreamweaver CC 2014 for Mac

  I just installed Dreamweaver CC 2014 for Mac and I have the "excerpt" option anywhere. It does not appear in the menu window, and pressing cmd + K does nothing.

  Any ideas?

  Thanks for the screenshot. Yes, you are not on the updated version. You can get it from the creative clouds.

  Launch Adobe Creative cloud and go to the Apps section and install it from there.

  I hope this helps.

• ___Help send for free Windows 7 upgrade version Windows Vista Home

  I have problems to send for the free upgrade to windows 7 from vista, I bought a new compaq computer last yr. Someone gave me a free version of windows 7 to be sent to me as long as I apply before February 2010.

  But when I go to enter the codes that they need on the site (windows update), in that I can't find the right codes on my receipt or the box that my computer has been delivered.

  I tried with the codes they use on the site, but they do not seem to work.

  Does anyone have the correct codes, I need or can you tell me where to find them on the box / receipt?

  Frequently asked questions - Upgrade Options
  http://www.Microsoft.com/Australia/Windows/buy/offers/upgrade-FAQ.aspx

  For new PC purchases, look for a Windows 7 Upgrade bid form in the package provided with your PC for redemption details. If you find any information on how to get the upgrade, contact the PC manufacturer if you purchased an eligible PC. It is very important that you keep the form that comes with your PC purchase. A good place to start the search for PC manufacturer contact information is on our Windows 7 upgrade Option page.

  TaurArian [MVP] 2005-2010 - Update Services

• Cannot find my camera to the raw file. Photoshop cs5 worm 12. I've updated to windows 10 and it suddenly appeared. I have another computer with the same version and no problem.

  I guess, in need, but taking that cannot be found in adobe. Any suggestions?

  Here are the most recent camera raw plugin 6.7.1 that works with photoshop cs5:

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Camera Raw 6.7.1 update

• I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  I have already installed LR4 and a new disc with LR5 on it (never activated - have the serial number).  I don't have a drive on my computer to install from the disc.  How can I go on upgrade to LR5?

  Download the installation files and use the serial number, you need to activate.

  Lightroom - all versions

  Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Mac

  http://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

• which is the easiest way to find the version of the motherboard to download its drivers when his need, when you don't have the manual of the motherboard

  Hello

  I knew that finding ITU version of motherboard or chipset to download the drivers of it .you must click pause / break key on startup then the computer wil show just like the version of the motherboard bios.

  I just tried on my computer to start, to see if it works, I pressed pause/break on start up button to see if it is really to give me the information about the version of the motherboard, but it seems nothing happen. I tried it on my desktop and on my laptop by pressing the pause/break key to reboot but it seems nothing happen .no information about the version of the motherboard.

  I looked in the bios, but there is also no information on the type of card mother and version (or chipset).

  I looked in system information, but there is also no information on the type of motherboard and version.

  so my question now is if you do not have the manual of the motherboard (I know on laptops, that the version of the motherboard is written on the back of it) that way someone may know the motherboard type and version to be able to download the drivers of it if it wil really necessary.

  I just ask this question because I started working with computer repair work.

  Thank you

  Johan

  Depends to a certain extent if a PC brand or not. If a PC brand system driver is available since the manufacturers of PC support site.

  Of Belarc Advisor is a free utility that will provide a wealth of information for PC operation

• I don't have that PP upgrade DVD Cs6 Cs3, I need to reinstall in a new machine, how can I do this without disc cs6

  I have used PP since 1.5 I am now on CS6, but 3 recent updates have been on DVDs of upgrade. Now I need to remove and reinstall the Prime Minister. How can I do this without disc CS6. I can't reinstall CS3 and do the updates individually as CS3 was for Win XP and I'm not sure it would work. Is there a dept in Adobe I can contact (no phone number) to get a DVD CS6. Thank you for any assistance.

  Adobe has made this process much simpler in recent years.

  No need to re - install any version prior to the current version (CS6). All installers (upgrade or full) contain the complete program code. The difference between the full and upgrade is in the serial number.

  All you need to do is download (link below) and install CS6, indicate the number of the CS6 upgrade then enter CS5 serial number (although this is also an upgrade).

  Download the CS6 products

• My computer is Windows vista basic.it down brok that I try to restore to Windows vista Basic. but. upgrad. and I don't have the key to the new vista

  How do I restore my computer to windows vista basic

  Hello

  Here are the different ways to reinstall vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a microsoft dvd vista

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  Save all data, because it will be lost, do the above

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246