Double screen put in place since firefox 9,01 menus blink in and out

Similar Questions

• Double screen put in place

  I have a brand new HP Envy Pheonex 810 109 product # F3D89AA #ABL I am currently using an old Dell monitor in VGA port and it works very well. I bought a HP Pavilion 27 "to add as a second monitor and also bought a DVI - D to HDMI cable. However, "check video cable" keeps showing up on my Pavillion. In the screen set up where he asked the source, I tried both DVI and HDMI nor work. In another announcement someone mention the reset of the monitor, so I tried that. Always get check the video cable. Any suggestions?

  You have a choice to make.

  You can use two video outputs on the video card or the single video output on the motherboard. You cannot use both.

  I suggest using the DVD, released on the video card and a card in the HDMI output on the card. The only problem is that using an old-school VGA monitor does not work on the outputs of the video card because it needs for the output of digital display devices. If you want two screens of the video card, then you will probably need to buy another LCD screen to connect to the video card.

  It is probably time to consider turning off the old VGA monitor to the pasture. His time has come and gone.

• I need to put in place the security of the laptop running finance and don't know the programs and the finest details of it.

  Security

  I need to put in place the security of the laptop running finance and don't know the programs and the finest details of it. I need to buy, sell and subscribe. I need to use programs such as paypal also.

  You have antivirus installed? If this isn't the case, I would install Microsoft Security Essentials (MSE) for you antivirus protection.

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Windows 7 is really quite safe as is and does not need a lot of work to ensure.  There are a few FixIt who can put in place and ensure that it is set using the recommended security settings.

  http://support.Microsoft.com/mats/windows_security_diagnostic/en-us

  http://support.Microsoft.com/mats/Malware_Prevention/en-us

  http://support.Microsoft.com/mats/ie_performance_and_safety/en-us

  Just run the fix it is and install MSE and you should be sure resonably.

• My MSN software keeps putting in place a box saying that MSN is "problems and has disconnect..." I was unable to make necessary transactions since 09:00 this morning. Help!

  It seems that MSN is either not read or do not fix the errors in the error report sent earlier today when he disabled my ability to read emails, send emails go to Web sites, etc.  A box comes up in the middle of the screen of the computer saying that MSN disconnect due to problems and they are "sorry for the inconvenience"... it's not enough not to be sorry, the problem must be corrected... After this box comes up the screen comes back to my screen saver...

  Hello

  1. Once you get this error message?

  This looks like a corrupted database or crash of the customer.

  I suggest you get it contact MSN Support.

  Here is the link,

  Support MSN:

  https://support.MSN.com/?scrx=1

• Since Firefox v10. Layout, print preview and print do not seem to work with XP PRO SP2 x 64, but normally work with Win7 x 64.

  Layout, simply change line title to the foreground and freezes the screen except for the ability to close the page and return to the page where Page Setup was invoked. This print preview a gray monochrome page with the normal menu features that normally respond except the function of setting of the Page. Print prints a blank page still. Noticed problems with Firefox beta versions 10 and 11 and 12, with XP Pro SP2 x 64. Firefox version 11 has no such problems with Windows 7 ult x 64.

  Hello

  Please see this.

  Printing problems

• I have a reconditioned Ipad4 64 GB and me put in place today, but it keeps going blank and then showing just the Apple. Have tried to quit, but does nothing:(delesde idées)

  I bought an iPad 4 64 GB with 4 d and have put in place today, but the cry keeps losing information and goes blank. When he decides to turn back on an Apple appears but then nothing? Did have to operate for an hour today. Not the owner of an iPad happy that I have improved my original iPad to do this. Help, please

  Where the iPad was purchased at?

• Why Firefox do not recover my windows and tabs 98% of the time at startup?

  Almost everytime I close Firefox I go back to my homepage first.
  Almost whenever I boot Firefox I get the message on the screen ' well, this is embarrassing, Firefox can not recover your windows and tabs "and I have to select Restore Session.

  Try using ' Firefox/file > exit ' (Mac: ' Firefox > leave ";) Linux: "file > exit ') to close Firefox if you're doing that by clicking on the X close in the title bar.

  See "hang out":

  • http://KB.mozillazine.org/Firefox_hangs

  See "Firefox crashes when you exit it:

  • https://support.Mozilla.com/kb/Firefox+hangs

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• I have a 22 inch monitor set to 150%, but since I installed Firefox, the font is too small and the screen is too small. Cannot enlarge font or screen. I can do control ++ whenever I have enter a page but don't want it as my solution.

  Control/display panel, I got my screen set at 150% and a resolution of 1680 X 1050. It filled my screen 22 inch with the content of the page. Now that I have installed Firefox, the police is too small and the content is centered in the screen leaving about3"each side of the space empty. I want to fill the screen and make things bigger. Have not found a way to do it. Firefox tells me in my window/display of the control panel that setting my display at 150%, ' some elements may not match your screen if you choose this setting if your screen is positioned on this resolution. " It worked fine with the Explorer.

  To help other users find solutions, please come back to this Thread and connect you to the

  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• I can't find the tab of Firefox which takes me to edit and print et al, except that I have a little bitty screen.

  I just got a new computer and have changed for windows 8, and the guy put in place with internet explore when I was accustomed to using firefox. My son put on firefox, but I can't find the tab firefox with access to edit, print, print preview, etc., except when I got the box of firefox on three-quarters of the screen, which is too small. How to fill the screen and still give me the small box so I can print? Please do not reply to an avalanche of gibberish, because the understanding of my computer is negligible.

  Hi Senyax, how are enlarge you Firefox when you want more? They will give you different results:

  (1) maximize the window (the middle between _ and X button)

  You should still be able to see the top bar of the window with the orange Firefox button. If you don't see this, one of your Firefox settings files could be damaged.

  (2) full screen (F11 key or the Firefox button orange > fullscreen)

  By default, nothing else that the site displays full-screen mode. Although you can have the tab bar and toolbar display (drag your mouse to the top of the screen and right click on an empty area of the tab bar, then uncheck "Hide toolbar"), you cannot use the orange Firefox menu button in this mode.

• Upgrade to Firefox 25.0 today. Now I can not restart (hangs or blue screen; Win 7) but it starts in Mode safe mode OK and it starts in mode NML if Ive not running Ffx

  Upgrade to Firefox 25.0 today. Now I can't restart the computer (it crashes or goes to the blue screen; Win 7) but it starts in Mode safe mode OK and it starts in normal mode if I don't run Firefox since I finally started. This suggests that Firefox 25.0 installation done something for her. How can I proceed? Thank you, Jim.

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Since Firefox v34, after Zoom text on a Google search page took me, the Google search page is empty after you click 'Back' to it. What is a v34 glitch?

  Since Firefox v34, search results page is empty, 1) by clicking a link in a Google search results page and loading of the linked page, 2) Zoom on the text on the page that Google took me and then without resetting the zoom text, 3) by clicking on the arrow of Firefox 'Back' to return to Google search results. If at that time I reload the page of Google results, or click back one page and will transmit then again, the full search results will be displayed then again.

  This happens on my Windows 7 PC as well as my Vista laptop. Is it a glitch with text zoom and Google in Firefox version 34?

  Sorry, this seems to be a problem with the cache in memory of Firefox: when you use a high Google zoom level the (the default setting) with "instant prediction results" then Firefox pips showing again after going back page (you can see the results for a fraction of a second before they white).

  Assuming you like your zoom level and enjoy using the instant prediction results, then the solution is to disable the part of the Firefox cached in memory by changing a setting under the covers.

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste sess and make a pause so that the list is filtered

  (3) double-click the preference browser.sessionhistory.max_total_viewers and change the value from-1 to 0 (that's a zero).

  (Please change not all other parameters similar to 0-sounding or you can disable the ability of Firefox to save/restore your tabs and windows open).

  Then reload the page of Google results and the test.

  Fixed? (Or should I say, worked around?)

• Why Windows high contrast doesn't work anymore since Firefox 29 and the theme of the Australia?

  In firefox, 28 and all versions before that when I had Windows High Contrast active firefox would also be in high contrast. This would make black Web pages and all the text would become white. Because of my disability which makes it much easier for me to see and walk through it. Since firefox 29 and the introduction of the Australia theme but it seems like a high contrast in windows is no longer supported by firefox. That's why I went down to firefox 28 in order to be able to navigate as I used to.

  There is a hidden value that needs to be modified in two places:

  Go to Options > content > fonts look and colours, click on 'Advanced' > uncheck allow sites to choose the fonts and colors
  AND
  Click on ok and the color... on the content page > uncheck the allow pages choose own colors other than above. Make sure that the background is black and white choice policies.

  Under windows if you have high contrast mode, please also try "use system colors".

• I can't get rid of Genieo since Firefox. I think that I managed to get rid of my other browsers. I feel I have tried everything.

  I tried to get rid of this program or anything since Firefox for months. I think that I got rid of it from Safari and Chrome, but it returned to Firefox.

  I uninstalled, rebooted, changed the start page, reconfigures tried it's a nightmare to the computer. Deleted Firefox and all Genieo and it's still there. I hate it.

  I have a Mac OS 10.7.5

  The topic: config page works the same on all platforms, so these instruction should work for you on a Mac as well.

  Type Subject: config in the address bar (address) and press the 'Enter' key to open the topic: config page, just like you open a Web site by typing the URL in the address bar.

  • If you see a warning message, so you can confirm that you want to access the comments: config page.
  • Use the top search bar of the about: config page easier to locate preferences
  • preferences that have been changed and do not have the default display in bold (user set)
  • preferences that are user defined ("BOLD") can be reset to the default value using the context menu
  • preferences can be changed via the context menu: Edit (string or integer) or turn (Boolean) or by double clicking on the line with the pref
  • preferences can be created via the context menu: new-> String, Integer, Boolean

• When I put in place many home pages, I get two NEW pages when I click on 'Home'

  Firefox on XP 19.0.2
  I've always had firefox put in place to open two pages, so that my homepage is
  https://www.google.com. https://www.Google.com

  When I open Firefox, I have two tabs, two on Google. If I opened a 3rd tab, I get a blank page. Just what I wanted.
  Now, all of a sudden - when I open Firefox, I have my two pages, but if I'm on Page 0 and click on HOME, I get TWO tabs open to my home page (for a total of 4 pages).

  I read online to replace the hose with 7% C but that causes a Service of-27 error.

  Something has changed within FF in the updates... How can I get the expected return behavior?

  We try to understand what you want to achieve and perhaps provide an alternative because it does not work with Firefox the way you currently use.

  If you set multiple home pages then all of these pages will open if you click the home button.
  
  That has always been the case in Firefox.
  
  In some cases the active tab may be protected and these pages open in a new tab, so you can end up with two additional tabs if you have two pages defined as many home pages.