Doubt in the use of the Link command

Similar Questions

• On the link command Action is not firing

  Hello

  I use JDev Version 11.1.1.6

  I have CommandLink where I wrote a method at the bean for Action. And the same command binding has the showpopup behavior

  My hypothesis was during the click on command action method first fires link then goes off then the showpopup behavior.

  But when I click on method action link command is not shooting, only showpopup behavior is pulled.

  is TI WHEREAS behavior?

  Thank you very much

  ~ Pierre Badri

  As already mentioned, the showPopupBehavior prevents the action send to the server.

  You can remove the showPopupBehavior from your link and show the popup from within java code in your bean.

  RichPopup.PopupHints ph = new RichPopup.PopupHints ();

  Popup.Show (pH);

  Timo

• How to extract all the drives SAS/SATA and Ethernet port speed of the link command line?

  Hello

  Do you know if supports Windows OS built in order to extract all the SAS/SATA drives and ports Ethernet link speed?

  i.e. for SATA3 drive it show 6 Gbps, for DIS3 drive it will show 12 Gbps, to present the current link speed.

  i.e. for Ethernet 10 G, it will show 10 Gbit/s while the current connection speed is at 10 Gbps.

  I need the command to create a batch file to run bike test to check all connection speeds are correct in each cycle the system power runs, if the Windows operating system does not support built in order to achieve this, please send us any tool of 3rd - party with the support of the command line to do this.

  Thanks in advance.

  Jacky

  Hello

  This is a forum for Windows and you can't find the experts here, so your question will better suit in the TechNet forum where members of the community who have the expertise to help you. Check out the link and post your query:

  https://social.technet.Microsoft.com/forums/en-us/f4a3a72b-21e4-45fc-b623-eb1d99215c79/command-prompt-and-bat-files?Forum=w7itprogeneral

• Doubt about the RMAN command

  Friends, what exactly makes the command "change archivelog than any overlap"? Thanks in advance.

  Must be the same as:

  crosscheck archivelog all;
  

• doubt on the link report-inerarcitive apex

  Here's my query select empno, deptno from emp;
  That's how my interactive report. .
  What I need, is if I press a link on the deptno column in the report... it is to show me a detailed report for Dept.
  
  It should show me another report as... Select * from Department where deptno = link .deptno...
  How this can be accomplished in the reports.
  Thank you

  susf wrote:
  Here's my query select empno, deptno from emp;
  That's how my interactive report. .
  What I need, is if I press a link on the deptno column in the report... it is to show me a detailed report for Dept.

  It should show me another report as... Select * from Department where deptno = link .deptno...
  How this can be accomplished in the reports.

  This is a very basic technique that is dealt with in the Guide + Developer + 2 day.

  If you have not followed this tutorial, it is recommended to do.

• Construction error suggested adding to the linker

  I'm adding some xml SOAP may app.  I'm following the example of xml SOAP as close as possible.  When I compile the application, I get a non-descript "Error 2" and "error 1".

  In the console, the last lines are

  make[1]: Entering directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  make -f Makefile.Debug
  make[2]: Entering directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  qcc -Vgcc_ntox86 -c -Wc,-include -Wc,o-g/.obj/TabbedProject -Wno-psabi -lang-c++ -fstack-protector -fstack-protector-all -g -Wno-psabi -Wall -W -D_REENTRANT -DQT_NO_IMPORT_QT47_QML -DQ_OS_BLACKBERRY -DQT_DECLARATIVE_DEBUG -DQT_DECLARATIVE_LIB -DQT_CORE_LIB -DQT_SHARED -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/share/qt4/mkspecs/blackberry-x86-qcc -I../../TabbedProject -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/qt4/QtCore -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/qt4/QtDeclarative -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/qt4 -I../src/qtsoap -I../src -Io-g/.moc -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include -Ic:/bbndk/target_10_1_0_4828/qnx6/usr/include/freetype2 -I. -o o-g/.obj/main.o ../src/main.cpp
  qcc -Vgcc_ntox86 -lang-c++ -Wl,-rpath-link,C:/bbndk/target_10_1_0_4828/qnx6/x86/lib -Wl,-rpath-link,C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib -Wl,-rpath-link,C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib -o o-g/TabbedProject o-g/.obj/Answer.o o-g/.obj/MarketingService.o o-g/.obj/Person.o o-g/.obj/applicationui.o o-g/.obj/main.o o-g/.obj/qtsoap.o o-g/.obj/moc_Answer.o o-g/.obj/moc_MarketingService.o o-g/.obj/moc_Person.o o-g/.obj/moc_applicationui.o o-g/.obj/moc_qtsoap.o    -LC:/bbndk/target_10_1_0_4828/qnx6/x86/lib -LC:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib -LC:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib -LC:/bbndk/target_10_1_0_4828/qnx6//usr/lib/qt4/lib -lbbdata -lbbsystem -lbbcascades -lQtDeclarative -lQtScript -lQtSvg -lQtSql -lsqlite3 -lz -lQtXmlPatterns -lQtGui -lQtNetwork -lsocket -lQtCore -lm -lbps
  C:\bbndk\host_10_1_0_238\win32\x86\usr\bin\ntox86-ld: o-g/.obj/qtsoap.o: undefined reference to symbol '_ZN12QDomDocument15createElementNSERK7QStringS2_'
  make[2]: Leaving directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  C:\bbndk\host_10_1_0_238\win32\x86\usr\bin\ntox86-ld: note: '_ZN12QDomDocument15createElementNSERK7QStringS2_' is defined in DSO C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib/libQtXml.so.4 so try adding it to the linker command line
  make[1]: Leaving directory `C:/Projects/BB10/BB10.2/TabbedProject/x86'
  C:/bbndk/target_10_1_0_4828/qnx6/x86/usr/lib/qt4/lib/libQtXml.so.4: could not read symbols: Invalid operation
  cc: C:/bbndk/host_10_1_0_238/win32/x86/usr/bin/ntox86-ld caught signal 1
  make[2]: *** [o-g/TabbedProject] Error 1
  make[1]: *** [debug] Error 2
  make: *** [Simulator-Debug] Error 2
  

  I wonder if Iam supposed to include libQtXml somewhere in my application.

  Guess I should have just even if it a bit longer.

  I added

  #include 
  

  In the web service class, and then added

  QT += xml
  

  In the file .pro as indicated in the reference QtXml.  The error disappeared.

• Disable vEthernet snmp trap-the link on 1000v status

  Hello-

  Are there options to disable the registered link interruption snmp on the 1000v Veth interfaces?  The normal 'without snmp trap the status of the link"command is not available on a Vethernet interface on port-profile.  You can do it on the connection ports rising physics, but who don't buy me anything.  The example of this shows doc you can, but that doesn't seem correct to me, http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_4/command/reference/n1000v_cmds_s.html#wp1309091

  I prefer not to disable all notifications link snmp status, but maybe it's the only option.

  Thanks in advance

  Hey Chad,.

  I created the Bug next to track this problem in versions 1.4 and 1. 4A:

  CSCtx41516 - Disable 'snmp trap link-status' on a vethernet interface

  Essentially, it is a summary of the discussion in this thread and try I did accordingly. If all goes well, you should be able to find out.

  With respect to the request to apply the configuration to the port-profile level, I went back and tested whether this feature was never available in SV1(3b), (3d) SV1, SV1 (4) and SV1(4a). The answer to that is unfortunately not.

  If you need this feature, because it would be beneficial in your environment where you create interfaces vethernet 1000 +, I recommend that join you your team account/sales and put in place a business case for the feature request. They can help to put it together and try to get the feature approved by the developers and the Business Unit request.

  I would like to know if there is something else.

  Thank you

  Michael

• Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to

  Using Firefox 7.0.1; having problems with hotmail. Cannot click on controls at the top of MSG, which is New, reply, delete, etc.. Can click on the same commands @ the bottom of the problem w/no MSG. Also cannot click on Inbox folder once I have access to another folder. All known solutions?

  This problem may be caused by the Yahoo! toolbar as scopes as well down and covers the top of the browser window, allowing links in this part of the screen not clickable.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters.

  original title: links in e-mail newsletters don't work

  I am using Windows XP Pro SP3. IE8 or FF8 can open all the links that appear in my subscription newsletters. The message I get is:

  Firefox can't establish a connection to the server...

  Because this happens with both browsers, I suspect that some settings in Windows is the origin of the problem - maybe an update. Everyone knows about this type of behavior? Someone at - it suggestions for me?

  Hello

  This information should be useful.

  1. the HOSTS file would have an impact on all browsers. If you do not deliberately use the HOSTS file to block some websites, run the FixIt in this article to reset (clear on) the HOSTS file.
  How can I reset the default Hosts file? :
  http://support.Microsoft.com/kb/972034

  2 key is only, but go to Internet Options > privacy and try a cookie of low value or accept all.

  3. from security on the IE command bar > InPrivate filtering settings, disable filtering.
  Always safe > Filter SmartScreen > disable the SmartScreen filter.

  4 disable third-party security programs (antivirus, antispyware, firewall, etc.) * just long enough * to test some links.

  5. similar to the #3, but more in depth...
  The clean boot troubleshooting, try.
  331769-how to perform a procedure to clean boot (XP & Vista)
  http://support.Microsoft.com/kb/331796

  Don

• Trojan: Win32 / Sysdef - fake. How do I restore office files, etc. by using the attrib command? Thank you

  I worked with the Microsoft Support to discover some hidden files. The tech told me that the files are still there, just hidden. He used the attrib command to discover some of the files. The tech said the remaining files must be made manually, how?

  How to find the files? My office is still hidden. I have bookmarks and word files.

  Thank you

  See Steve Cochran's response, dated June 2, 2011 in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/how-do-i-recover-windows-files-from-the-start-menu/96d70458-4fb4-403f-ac96-e88f5b6ffec4

  See the instructions for removing the difficulty system in the following link: http://www.bleepingcomputer.com/virus-removal/remove-system-fix which includes a presentation about the hidden files and folders.

  Are you sure that you have more malware on the computer?  Have you run everything on scanners such as Malwarebytes or Superantispyware?

• Create a new folder or change the name of a folder on the desktop does not display until I use the refresh command

  After changing the name of a folder or a file on the desktop or by creating a new folder (and then hit enter), the folder or the text file doesn't change - until I use the Refresh command. Then, the text shows correctly and the movements of folder or a file in a place open to the top left of the screen. Before using "Refresh" the folder or the file will not open. When I save a file on the desktop is not visible until the 'Refresh' is used. Sometimes, but not always the same behavior occurs in other folders as well.  I use Win XP SP3. Can someone please shed some light on this?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·

  Method 1:

  I suggest you check in safe mode. Follow the steps mentioned below.

  a. restart the computer and keep tapping F8 until you reach the start menu.

  b. click on safe mode from the list and press ENTER.

  Check if the problem persists.

  Method 2:

  I suggest you to scan your system for viruses and malware using a care Microsoft and Microsoft security essentials. Check the links below.

  http://OneCare.live.com/site/en-us/default.htm

  http://www.Microsoft.com/security_essentials/

  Method 3:

  Create a new user account and check if the problem persists.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• When I get an email, according to windowsmail with attachments, I can't file attachments by using the file command menu

  original title: impossible to file attachments in mail

  Hello; I'm with family Vista premium and windows mail as a messaging system. I was with IE8, and now I've migrated to IE9.

  When I get an email, under windowsmail with attachments, I can't file attachments by using the file command menu. This option is blocked. Under windows mail, I went to tools, options, security and made sure that: Let not the attachments which are unsecured... box be deselected. It makes no difference, and I still can't save attachment like this; I CAN SAVE BY CLICKING and opening the attachment and save it but it is not satisfactory that I can't save the attachment by using the file command menu.

  Can you help me please?

  IE9 is certainly the culprit and there is more questions. I know that some MVPs have contacted their MS threads about it and even received no answer.

  My guess is that MS will not address this issue. Do not forget that the development team of Windows Mail is dissolved by the MS in June 2006. (Yes, while Vista was still in beta). I seriously doubt they care.

• using the FC command with the GUI drag & drop

  In Windows 95 and 98, it was possible to make a shortcut to the "CF" MS-DOS command on the desktop, and then compare two files by drag & dropping them on the shortcut.

  However, starting from Windows XP, while this still TECHNICALLY works, the MS-DOS window (I do not remember what to call other than "command prompt window", so bear with me) will close immediately upon expiration of the program, making it impossible to read the results, especially if it is "no differences encountered".

  I remember that there was no decent way to solve this problem in XP, but is there a solution to Vista or 7? Typing long file names can be heavy, and even by using copy and paste is tedious compared to the ease, I remember not on Windows 9 X.

  Oh, I just had a thought when you think of batch files. I tried to add a pause at the end command. That seemed to work. It has been long since I made a batch file that needed the pause command. I don't know why I thought using a batch file with a command to break a decade ago.

  Oh and thanks for the link explaining the differences in the manufacture of the batch files. I learned how to 3.30 in 1990 for MS-DOS batch files and never really learned anything new other than the fact that I could use drag-n - drop in Windows 95.

  Is there something else that I could learn a few new tricks that have been introduced since MS-DOS 3.30? I _might_ have read books for MS-DOS 4 or 5 at the time, because there weren't really that many differences. The only different things I knew were the dosshell in MS-DOS 4, Edit & QBASIC in MS-DOS 5 and extended external help of 6.2.2 MS-DOS command which was similar (although I didn't know it until the end of the 1990s) for Unix man pages. Oh, and in one of these versions, they also did better? parameter help messages.

• I use hyperlinks often, but all of a sudden, today, when I try to use a hypertext link, I get an error message saying that I am the action was limited and I need to contact the administrator.

  As I am the administrator that I have no idea what to do?

  As previously, I clicked no doubt something I shouldn't have and caused this annoying problem myself.  I just want to know how to use my unrestricted links once again.

  Give this a go.

  For hyperlinks doesn't work does not (usually in email)

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;310049

  I hope this helps.