doubt to the wi - fi connection

Similar Questions

• Inlet air Time Capsule abandons the NAS server connection

  I have problems with my time capsule 2 TB air port when you view the administration of my Netgear Readynas a browser page.  The Admin page may stop working intermittently.  I got then refresh the web page to re-establish the connection.

  This happened with any browser of the computer, safari, IE, or Windows 10 Edge and any computer, Mac Book Pro, iPad, IMac, PC and makes no difference if it was wired or wireless.

  The only way I could stop the problem from happening is to replace it with an old Netgear R6300v2 router time capsule.

  The connection is completely stable with the Netgear router.

  Time Capsule firmware is version 7.7.3.

  Either way, I had to work with Netgear support for several hours remove the SIN as the problem and to locate the airport as the question time capsule.

  Hoping someone has a suggestion on how to get the time capsule works again correctly.

  Unfortunately there are no controls to help you.

  You can report the problem to apple, but I doubt they will take it seriously.

  I think that the issue has to do with the web page tools used by Netgear, which the TC does not include the protocols used.

  For now your best bet is to permanently keep your R6300 the main router... but you can plug the inside in Bridge mode TC. Then, create a wireless network and see if the client is connected by wireless (or ethernet) for the TC still has the same problems with the Netgear NAS.

  The issue will not, even if it does, the administration... pages the client behind the TC must always be able to use disk space in the NAS without problems. And you can continue to use the TC for Time Machine backups and wireless... Although these two functions you may now push the Netgear router more SIN.

• Conexant HD audio presets and the external speaker connections

  I have some doubt about this problems with queries?

  My laptop configuration:

  Name: Toshiba C640-I4014

  Processor: Intel Core i3 2330 M

  Audio driver: Conexant SmartAudio HD

  Audio ports: two (1. Helmet 2. MIC)

  Speakers: Built-in stereo speakers

  Outdoor speaker of Philips 5.1 multichannel (3 Ports = 2.1 channels, channels 5.1, Center)

  After obtaining this devices were struggling on the connection of the external speakers with my laptop computer ports. First of all, I have connected the headphone portable at the port of philips 5.1 via the single cable after that that I had very low noise in the REAR speakers only done even do not climb on the subwoofer bass and other stakeholders like 2 ubiquitous speakers. Then,

  I connected the laptop headphone philips 2.1 unique cable port. Now I'm getting all the sound speakers and subwoofer with 2.1 channel sound, but it does not work 5.1 channels multistreaming.

  Then I thought that it will work connection is.

  Port of portable headphones = on Philips Exteranl 5.1 speakers 5.1 channel port

  Computer laptop microphone Port = port channel 2.1 external speakers Philips 5.1

  None = Center port external speaker Philips 5.1 speakers

  Then, after I tried to configure the Conexant HD SmartAudio driver, here's the problem,

  Problem 1:

  Conexant Audio software is not configuration of the external speakers

  For Ex: Two streams available on this audio driver

  * Classic flow

  * Multistream

  Here, if I chose "Multistream" his does not work with external speakers connected laptop after removing the external speakers of his work with portable speakers integrated with multistream. But if selected with the mode 'Classic Stream' his work external speakers with subwoofer with all speakers even time and sound. But I need a 5.1 multichannel sound. I don't get this sound on my PC laptop Toshiba c640-I4014 with philips 5.1 speaker.

  Problem 2:

  Conexant SmartAudio HD speaker settings,

  If connected to the port of the external channel speaker 2.1 also its projection on the headphones plugged symbol

  If connected with port channel 5.1 external speakers not working not properly.

  If connected with External headphone with MIC as its projection on the wired headphone symbol

  After removing the cable from the speakers external then driver Conexant HD SmartAudio only displays as speakers connected symbol in the driver software. Its average single speaker connection working with built-in speakers or what?. If I tried connected to external speakers its projection in the just connected headphones.

  After these problems, I have a doubt on my laptop and speakers with drivers,.

  1 Toshiba C640-I4014 computer laptop support 5.1 channel speakers?

  2 driver Conexant HD SmartAudio will support 5.1 channel speakers?

  3. why "Multistream" Mode does not work with the external speakers connected to the laptop?

  So please read over problems after so help me on this question...

  Thank you!

  Kind regards

  Jayasudhan S

  Hi Jayasudhan S

  I'm glad that my solution was helpful for you.  Please could select the YES checkbox

  All the best

  Mary Julia :)

• Doubt of the ACL

  Hello. I have a little doubt about the ACL:

  If I apply an ACL (denying any entry/exit telnet connections) to the interface VLAN 5 192.168.1.254 IP address is it still possible to telnet to IP 192.168.1.254? Other IP addresses on the network, I know that it is not possible.

  Thank you.

  You can control the protocols used for the management of the VTY. To allow only SSH, you follow these steps.

  line vty 0 15

  entry ssh transport

  Let's say for some reason any you telnet and SSH, you follow these steps.

  line vty 0 15

  transport input telnet ssh

  Here is a link to the configuration of SSH (router or switch will work).

  http://www.packetpros.com/wiki/index.php/Cisco

• At the start of my Toshiba laptop Windows 7, my password is correct, no doubt, but the system says that it is not. Why?

  From my computer, my password is not correct no doubts, but the system said that it is not, ran maleware advast and no problem. Would it be a glich in the updates? Is this a battery problem? When it is plugged in, it works after the 5 or greater.

  See the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but this looks like a corrupted user profile that needs fixing or replacement.

  Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

• Only local users appear in the list of connection

  I installed recently to El Capitan on an iMac and have problems with the users network connection settings. The server is running the Mavericks with OS X Server 3

  The first problem is the login screen. If the value to the list only displays the users created locally on the iMac. It doesn't even have the option 'other '.  If I change to display the username and password I can connect to the network no problem accounts, but this is not what I want.

  File Vault is not lit. The parameters are almost all by default. It's one clean and installation other than the connection to the server and allowing the connection of the network user, I made no changes before my first attempt.

  Since then, I created other local and users made changes to the connection options for the test but nothing else.

  The profile on the Server Manager is configured to display the 'other' and a list of users on the network (I changed a couple of times for the test settings, but nothing changes).

  It may be unrelated, but I found that the other changes in the Profile Manager appear to have no effect. For example, I did one of the users of the network, a mobile account, but he is not ready you as mobile on the iMac.

  Can someone give me tips on where to find the next?

  Is there a reason that you use Server3?

• How to document iMac to my apple tv 2, but sending audio to the Airport express connected to my hifi

  I have an iMac, a macmini an express airport. I want to send 720 p video to the Apple TV 2 iMac (or macmini) but send audio to the express from the airport which is connected to my stereo. If the apple TV 2 will serve as a video receiver connected to my projector on the ceiling. (I don't have a way to use a hdmi cable). This is the reason why audio must be sent to the hifi differently.  Alternatevely because the macmini is connected by USB cable to my hifi (to my dac), perhaps there is a way to send audio from a movie to the stereo through audio external USB card (it is the dac) while reflecting the macmini for the Apple TV 2...

  in iTunes, you can select more then 1 speaker output could be the express and then mirrored to the appletv in the manner of STDS, if is not in iTunes then I think that you need a third party such as the wing option

• How can I import documents in an FCP project, using the DVD player connected to a MacBook Pro 10.10.5 Super player?

  How can I import documents in an FCP project, using the DVD player connected to a MacBook Pro 10.10.5 Super player?

  You need to rip a DVD? Try MPEG Streamclip or brake hand. Both free. Streamclip better, but much more complicated to install and use.

• MacBook randomly landed volume when the headphones are connected.

  Hey,.

  There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

  My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

  Please try resetting the memory NVRAM and SMC.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

• How to set the number of connections to the server. I am rejected after three connections.

  The following message appears when I consulted three folders in my email...-'unable to connect to the IMAP server. It may have exceeded the maximum number of connections to this server. If so, use the advanced settings of the IMAP Server dialog box to reduce the number of cached connections. »

  You can connect to an IMAP server as often as you like, BUT...
  You can restrict the number of simultaneous channels that are open during this connection.

  Thunderbird sets a default limit of 5.
  You can go higher on some servers, or you can go as low as 1.
  Try to set the limit of connection for 3

  "Tools - account settings - [select your account] - server settings - [settings of the server] - advanced - maximum number of connections to the server for cache - [enter 3]"
  If it is already set to 3, to descend more down - 2 or even 1.
  Out OK

  TB - 38, Win - PC 2

• Two of our accounts of Firefox will not allow the user to connect to gmail.

  I just upgraded my desktop computer for Windows 10. We have several user accounts on this computer. We all use Firefox as a browser. When one user other than me opens Firefox in their account, they can go without a problem, but cannot connect to gmail. They receive the following message: "secure connection failed. An error occurred during a connection to accounts.google.com. The peer certificate has an invalid signature. (Error code: sec_error_bad_signature). The page you are trying to view cannot be shown because the authenticity of the received data could not be verified. Contact the Web site owners to inform them of this problem. »

  If they disconnect from their user account on the computer and connect in mine, then start Firefox, they are able to access gmail and have all the features. Any suggestions? Thank you.

  Hi DShef, in case you are an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi?

  Is it possible to use the Remote app with the Apple TV connected via ethernet and iPhone via WiFi? When I try this Apple TV does not appear in the list of devices on my iPhone.

  Yes, I'm doing exactly this with the same put in place.

  If the problem persists the next relative to the following articles might help you.

  Troubleshooting home sharing

• The Mac cannot connect to iCloud

  I get a message, the Mac cannot connect to iCloud due to a problem with *.  This is my Apple ID, and I cannot go into Apple.  This happened after I had the mini for Mac guys and the guy deleted stuff in the keychain.  This message constantly comes back again and again even after I said 'later '.  In addition, since I had the machine for the MacGuys, a "Facebook password required" notice appears again and again.  As soon as I selected 'close', he is back in a few seconds.  I can use Facebook very well.  How can I get rid of these popups?

  < personal information deleted, re-titled by host >

  First of all try to access to the keychain via Finder > Applications > utilities > Keychain Aces and connection and re-enter the passwords for problem applications.

  If this does not work, you will need to reset the keychain and re-enter all the password.

  http://www.Computerworld.com/article/2891793/how-to-use-Mac-OS-x-Keychain-Guide. HTML

• Time Machine backs up only on the local network connection

  Hello

  I have a LAN Ethernet and a wireless connection to the same network. Is it possible to force the backup Machien time to use only the ethernet LAN connection in all cases? I want to warn the TMB to limit the bandwidth of my wireless network.

  Ethernet to be the highest network interface ordered to force, and as long as you're connected Ethernet, it be the interface for all traffic.

  System-> network preferences

  

  If you want seamless switching between WiFi and Ethernet, then your router book the same IP address for the interface Ethernet and WiFi connections.  This is done differently by the router of different brands and models.  For an Airport Extreme/Time Capsule, it would be done by giving your Ethernet and TCP/IP WiFi of the same name from DHCP reservations settings, and then associate the DHCP reservation name with an IP address in Airport Extreme network settings.

• Ignore the page "this connection is not approved" - no time no question

  My apologies if this has already been answered, but when I search almost all solutions are supposed to check your system time or run anti-malware software. I'm almost certain that this has nothing to do with the time system and moderately sure isn't because of malware.

  When I'm on the corporate network, I have to constantly go through the page "this connection is not approved" and go through the steps starting with "I understand the risks". When I look at the certificate, it looks like, it is delivered by our company IT Department. For me, that's good, because the pages that I'm going to are not sensitive for me.

  For example, when I go to http://google.com, for some reason any it redirects to https. Even if I think it's nice that google is on the lookout for me and a encrypting my traffic, it becomes annoying to many mouse clicks in firefox to do a simple google search to do my job.

  You must request the certificate root of the proxy server used by your corporate network to connect to the internet.

  • http://en.Wikipedia.org/wiki/Root_certificate