doubt with nic teaming on ESX

Similar Questions

• NIC Teaming in ESX 3.5

  Hello group,

  I have two boxes of esx with 4 NICs in each.

  Currently, I am only using two of the four NICs for each box of esx.

  I use 1 for the core of the vm network adapter and 1 network card for the service console of network/vm for each box of esx.

  How do you propose that I take two network cards available for every box of physics.

  If I create a team for the network of the vm, I can do on the fly, and what I have to do something about guests?

  Also, I read that this grouping only works for outbound traffic? Can someone explain?

  Thanks in advance!

  Best practice would be to have redundancy for the network of the virtual machine and the management network - you can do it on the fly and nothing should be done to guests (which I assume you mean virtual machines) with settings by default, you must restart the virtual machines to take advantage of the second NETWORK card - until then you'll have to gas be in active standby mode.

  Outgoing is only an indication that the ESX Server has no control on the inbound traffic - it can select which network of phyiscal card to send traffic

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• NIC teaming on ESX 5.1 and NGC failover

  Hi all

  A quick question. I know I read it before, but I can't find the reference again once. What is the recommended setting between allow vNic activate failover on cisco UCS and strategy setting on ESX 5.1 of the network?

  I know that I had read somewhere when the grouping of network cards is configured on ESX failover authorized UCS, ESX goes haywire if a path is lost the UCS.

  Our installation program running on UCS 2.04 Manager has with a mixture of blades M2 and M3 with M81kr and 1240/1280 cards respectively.

  Never use a fabric with a hypervisor vswitch failover. Let the failover of the vSwitch handle network failure mechanism.

  For ESX once you have two NICs attached to the vSwitch or a DVS it will automatically load balance and failover. You don't want you combine this with the UCS fabric failover.

  Louis

• Override the port NIC teaming with powercli group?

  Hi all

  Any chance you could lend a hand?

  I have a powercli script that goes out to all of my ESX 4.0 host and add a new port group to vswitch1 with a new VLAN ID. That works well, but I also need to override the NIC teaming on this port group, to set an active NIC and the other to be the backup. (we put NIC failover port groups not the vswitches).

  I see ways to change NIC vswitches grouping settings, but am yet to find a way to change the settings of the NIC collection for groups of ports themselves with powercli?

  Can someone shine a light?

  Thank you

  Try something like:

  Get-VirtualPortGroup-name '' | Get-NicTeamingPolicy | Game-NicTeamingPolicy - MakeNicActive "vmnic1" - MakeNicStandby "vmnic0".

  I hope this helps!

• NIC teaming with the IP hash load balancing

  Hi guys

  I have a virtual machine with a VMXNET3 10 Gbps. It is usually have a heavy traffic with a special server and saturate one of my two physical NIC of 1 Gbps in its PortGroup. I want to know what's going to happen if I turn on "NIC Teaming for this portgroup with basic IP hash load balancing". In my case the source IP address and destination are not change so the aggregates of traffic between my two physical network adapters?

  To avoid saturating completely the two 1GbE NIC, it can also be useful to look in charge based on the grouping and the NIOC. It will ensure that the other streams of traffic VM are not crushed by this machine a virtual when it saturates a network card. The disadvantage is that it requires Enterprise Plus licenses (using a dvSwitch).

• Are these viable designs for NIC teaming on UCS C-Series?

  Is this a viable design on ESXi 5.1 on UCS C240 with 2 Quad port nic cards?

  Option A) VMware consolidation of NIC with the load balancing of interfaces vmnic in an configuration active/active through alternate and redundant physical paths to the network.

  Option B) VMware consolidation of NIC with the load balancing of the interfaces in a configuration vmnic Active/Standy by alternate and redundant paths of material to the network.

  Option A:

  

  Option B:

  

  Thank you.

  She really comes down to what means active/active N ° and type of switches upstream.  For ESXi NIC teaming - Active/Active load balancing provided the opportunity for all network links be active for devices different comments.  Grouping can be configured in a few different methods.  The default value is by ID of virtual port where each guest computer is assigned to an active port and then also a spare port.  Traffic to this host would be only sent on a connection at a time.

  For example, suppose 2 Ethernet connections and 4 guests on the ESX host.  Link 1 for switch 1 would be active for 1 and 2 and 2 link to switch 2 backup for 1 and 2.  However 2 link to switch 2 would be active for 3 guests and 4 and 1 link 1 switch backup for 1 and 2 comments.

  The following provides details on the configuration of the card NETWORK is teaming up with VMWare:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1004088

  There are also opportunities for LACP configuration in some situations, but there is a material special considerations on the side of the switch, but also on the host side.

  Keep in mind that the vSwitch does not blindly broadcast/multicast/unknown unicast on all ports.  He has a strict set of rules that prevents loopback.  It is not a traditional L2 redirector so loops are not taken into account in an active/active environment.

  In addition, this document explains VMWare Virtual Networking Concepts.

  http://www.VMware.com/files/PDF/virtual_networking_concepts.PDF

  Steve McQuerry

  UCS - Technical Marketing

• NIC teaming and aggregation rate

  Hello

  I need help on configuring NIC teaming on our ESX. We have a HP Server with 6 network adapters I already configured the vSwitch for VMkernal, VMotion and Service Console.

  Now, since the ESX will run at various Web servers I want to do is aggregate throughput of EPS of 1 GB to give me a flow of 4 GB total. What I've done is created a vSwitch and alllocated 4 NICs to the switch and created a port called 'Prod LAN' and receives the NIC 4, also on our Cisco switch I trunked 4 ports.

  What else do I need to do to make sure that I have configured correctly the NICs, so that when we assign the network adapters on the virtual Web server computer it can use aggregate 4 GB throughput. Also that I also want to make sure, if some fail NIC 1,2 or 3, I always have speed on the port.

  Thank you very much...

  Duncan has identified the problem above with what you are proposing.  You may agree with your config if a physical switch entire fails but as stated above, if you lose an single link on one of the aggregates that ESX will add a unique link from the passive cluster causing the switch to become crazy.

• NIC teaming on HP Blade

  I use HP Blades as my servers to host ESX 3.5 update 3. I have only 2 NETWORK ports on each host and I would like to implement the NIC teaming, but I'm confused on whether I would run into any problems if the vmnic should fail.

  I set up vswtich0 with three groups of ports - the primary NETWORK card for my Console Service (VLAN12) and port groups Vmotion (VLAN3) is vmnic0 with vmnic1 failover

  I also created another group of ports for the VMservers vmnetwork (no VLANs) on vswitch0 with vmnic1 as a principal port with vmnic0 my failover group.

  What concerns me, is the port group settings switch to vmnic1? For example, if vmnic0 tilt vmnic1, will I run into issues because the Service Console is running on VLAN12 and Vmotion works on VLAN3, and vice versa with the port vmnetwork group.

  Hello

  You will need to implement VST where you master all the VLAN to the vSwitch through each Teddy.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• UCS C200 and NIC Teaming/FailOver

  As UCS C200 with management of a 10/100 and 10/100/two interface 1000 interfaces and PCIe with 4NIC

  I want to install CUCM 8.5 is the NIC Teaming/failover supported by UCS C200 and how to set up the NIC Managment interface with failover?

  Thank you.

  Hello

  As you install apps from the CPU on the server of the UCS, speech application team listed their recommendations here.

  http://docwiki.Cisco.com/wiki/QoS_Design_Considerations_for_Virtual_UC_with_UCS#Guidelines_for_Physical_LAN_Links.2C_Trunking_and_Traffic_Sizing

  You can create a NIC teaming in the ESXi via vSphere client software for traffic from from / destined for virtual machines.

  For C200, we have only one management port and if you use the management for MMIC traffic port, switch option is not available.

  However, if you choose to use host for MMIC traffic NETWORK ports, you can set up CIMC NIC mode for 'LOM shared' which provides the NIC teaming options.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/GUI/config/Guide/1.4.1/b_Cisco_UCS_C-Series_GUI_Configuration_Guide_141_chapter_01000.html#concept_AC4EC4E9FA3F4536A26BAD49734F23D0

  HTH

  Padma

• C200 M2 Windows 2008 R2 NIC Teaming question

  I have a c200 M2 Server with a map of map NETWORK Broadcom addon (N2XX-ABPCI01).  I would like to create a NIC team with all 4 cards (2 on board and 2 Broadcom).

  I found the enictool on the CD, but when I run it, it is not announce adapters or teams.

  How can I create a team on this server?

  Thank you

  Dave Harrold

  Hi Dave,.

  Utlities CD/.iso, you can find the BINS utlity for broadcom. This should help you.

  . / Afonso

• Oracle ADF: How to develop a web application to adf with a team of 10 members

  Hello, we need to develop a web application using Oracle ADF and jdeveloper 12 c. It is a great project as we develop this application with a team of members of dimension 10. Our doubts, this is how we can develop a web application using a team.

  Suppose we have 10 modules. Each module was developed by each Member (each Member is using a different system with the same environment. JDeveloper 12 c). Finally to develop all 10 modules how we can combine all 10 modules in a single application. How we can change the links, the page flow and connection details.

  Help, please.

  Thanks in advance.

  ADF is built for the development team. Features such as the ADF libraries, bounded task flows and nested application modules allow developers to work on separate parts of the project and then merge them into a single application.

  Follow the video that Timo has pointed out and read the section of the documentation on reusable components: https://docs.oracle.com/middleware/1213/adf/develop/adf-web-component-reuse.htm#ADFFD1846

  Regarding version control (and track tasks, make automated etc generations) - an option to consider is the Cloud Oracle Developer Service.

  Here is a demonstration of how you team management version on that app JDev/ADF: by using the Service of Cloud Oracle Developer for Git version for JDeveloper/ADF apps management

• iSCSI / vmkernel multipathing vs NIC teaming

  Hello

  I know of Configuration of VMware SAN Guide provides information about how to configure iSCSI multipath with vmkernel interfaces double on various uplinks.

  What are the disadvantages of using basic NIC teaming instead? Just an interface of vmkernel on a vswitch (d) with two uplinks. It will work properly about redundancy and failover?

  Kind regards

  GreyhoundHH wrote:

  What are the disadvantages of using basic NIC teaming instead? Just an interface of vmkernel on a vswitch (d) with two uplinks. It will work properly about redundancy and failover?

  I guess the difference is while using "Port Binding" iSCSI initiator uses vSphere Pluggable Storage Architecture to handle the load balancing/redundancy, that can make better use of multiple paths to NETWORK card available. Otherwise, the initiator will use vmkernel stack ensures redundancy network and balancing in the same way as a normal network traffic.

  I suggest that you look at the great post on iSCSI multi-vendor, I think the 2 statements below will summarize the difference:

  "

  • However, the biggest gain of performance allows the storage system to scale the number of network adapters available on the system. The idea is that multiple paths to the storage system can make better use multiple paths, he has at his disposal than the consolidation of NETWORK cards on the network layer.
  • If each physical NETWORK adapter on the system looks like a port to a path to the storage, the storage path selection policies can make best use of them.

  "

  
  

• NIC expresscard on esx - is it possible?

  Hi all

  On a lab, I only have two powerful laptops (Sager D900F) but with only 1 nic, is it possible to add either an Express card Gigabit NIC on an esx or a USB Ethernet device connected directly to the esx.

  If so, as everyone else has managed to do, in this case, what model, for example.

  Thank you

  There is NOT much choice for the ExpressCard NIC there (in GB at least)... You will have to choose one, try and see...

  Personally, I wouldn't use any laptop for ESX/ESXi running... There's just too many questions that might come up to go down this path (you have already reached the first road block)...

  You will find a lot more people using VMware Workstation to run ESXi facilities nested in try to bare metal on the laptops...

  Personally, you won't find me trying to launch a laboratory using any laptop... Especially when you consider what you spend on a laptop which is close to the power you need (and functions), you can get a good equipped workstation class Tower, which will do the job without problems (or with less far, far, away)...

  I do have a vCenter Server in my lab, I connect to when remote (and need to check something in my lab)... It's also a solution viable, even when it is remote... You can get a decent connection by your ISP speed (I do symmetrical 35Mbps) provided... All serious work, is done when I'm on the spot... As ISO download new files for installs, or anything that would require a transfer of large files my system to the host or store data.

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• NIC Teaming ESXi 4.0 recommendations

  Hi everyone-

  A very easy for you, but just need another opinion.  I have several hosts in my current environment of the virtual machine.  I add over several hosts.  Good grouping network adapters as well as the good deligation of the NIC issue.  What we have to work with-> 4 Integrated NIC (vmnic0-3), 4 network interface cards PCI (vmnic4-7), 4 (vmnic8-11) PCI network interface cards.  Not new in the world of the VM, but new to implement environmental...

  The current provision in the existing NETWORK adapter is as follows:

  vmnic0/vmnic3-> teamed for console Mgmt (vSwitch0)

  vmnic2, vmnic4, vmnic5-> available to the virtual machine (vSwitch1)

  It was setup by an admin before vm and I do not have a warm and fuzzy about how the management console is associated with and worries me because in my documentation, it States a specific nic should be designated for the vmotion, correct?  And this isn't on here too, even if the vMotion is enabled.

  What I would do is this way for team management console NIC

  vmnic0/vmnic4-> where NIC card breaks down, PCI NIC is ready and capable and vice versa (fault tolerance)

  Should I activate all the network adapters on the host?  Which would give me 2 integrated and available for the VM PCI 8.  I guess the network cards more better but sometimes too much of a good thing is bad...  Also is there a specific way to designate 2 just NIC for vMotion or is only a mute point?

  Thank you for your comments.

  > vmnic0 / vmnic4-> in the case where NIC card breaks down, PCI NIC is ready and able, and vice versa (fault tolerance)

  Yes, it's better than vmnic0/vmnic3 (of one physical chip)

  > Should I use all the network adapters on the host?

  Depends on what you want. Too many network cards will give nothing, except hedache if all VM traffic can be transmitted through 1 Gbit link without performance degradation.

  > Also is there a specific way to designate 2 just NIC for vMotion or is only a mute point?

  Use NIC teaming personal - seam vmnic1/vmnic5 as active/active or active / standby for VMkernel on vMotion portgroup.

  ---

  MCITP: SA + WILL, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• NIC Teaming Poweredge R420

  Hello:

  I am collecting information to configure NIC teaming on my server Dell poweredge r420.

  Other posts I've read it is mandatory, installing broadcom software and update the firmware of the NIC (Broadcom Netxtreme gigabit ethernet).

  I can't find the broadcom advanced control suite window to set up the consolidation of network cards.

  Can someone help me?

  You can access the Web from Broadcom site and download it here: http://www.broadcom.com/support/ethernet-nic-netxtreme-i-server or there are updates on the Dell Web site: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/poweredge-r710?driverId=2T17H&osCode=WS8R2&fileId=2961022443#

  Hope one of these works for you.

  Wheeler Mitzi (Mitch)