Doubts about the line of the error

Similar Questions

• Error message when you try to validate windows 'installation of the update failed. Information about the error - 0 x 80070424. Thanks in advance for your help

  When the computer that is running Windows 7 Home Premium 64-bit edition, I get a computer of saying error message fails genuine validation test.  This computer was purchased this year at Dell and has a valid license.  I hit the button to correct this error and tells me to download the required windows validation component.  Did and when it will install I get an error message stating "the update installation failure.  Information about the error - 0 x 80070424.

  Thanks in advance to find out how to solve this problem.

  two copies. the answer is here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/error-message-when-trying-to-validate-Windows/320e1e6c-6224-4238-B847-003cb921c10c

• WHAT I DO ABOUT THE ERROR IN THE CALENDAR: ICLOUD LIMITS EXCEEDING

  I use a Windows PC and an air of the iPad 2.  Recently, the update of Windows and I lost all of my calendars and contacts. they will not sync properly. After several hours, I was able to recover most of my calendars and contacts.  However, now I can't get something new into my calendar because I get the error message I'm exceeding I cloud boundaries.  I did not have this problem before the update of Windows.  I don't know what to do about this problem.  Any suggestions for a solution?

  I would contact Apple Support. You said that you have reached a limit of server. The only people that you can talk about these things won't be available to you through the user community forum.

  Contact Apple for support and service - Apple Support

  I hope that you have not exceeded the limits indicated in iCloud: limits for Contacts, calendars, reminders and bookmarks - Apple Support!

  If you did, and it wasn't by mistake, you can try to find a separate enterprise cloud service to iCloud.

• Important safety KB973565 update installation failure. No information about the error code: 80004005. Also, the installation of upgrade Office 2007 Ultimate. 1935 and 1310 error messages.

  COMPUTER: CPU & BIOS: Intel Core 2 CPU * address email is removed from private life *; The version of the BIOS/date: American Megatrends, INC. 1101, 07/02/2007
  System name: POLY595695; MFG: ASUSTek Computer INC.
  Memory: 4 GB
  HDD: RAID 5 with Intel RAID Controller: Intel ICH8R/ICH9R/ICH10R / / PCH SATA RAID Controller version 8.8
  ROM: version 6.0.0.1017
  3 Seagate 320 GB hard drives
  SYSTEM MODEL: P5B - E

  DUAL BOOT SYSTEM: Windows Professional XP & VISTA ULTIMATE SP2, Build 6002 6.0.6002 worm

  The RAID system is a failed drive so it's currentl status "degraded".  I installed two new discs and got a replacement 3rd on the way after the latest RAID driver ver. 8.9 to 8.8 for the Intel of current top technical issues site. According to the Intel site, we reported recurring and random disk failure with version 8.9, which they have not been able to reproduce in their laboratory, but say that returning to version 8.8 has solved the problem for users with this problem.

  WINDOWS UPDATE: Follow-up of the troubleshooting steps, but no information on the given error code, 80004005.  This security update is not constantly in the 2 months prior to the update of the change on hard drives or RAID driver.

  OFFICE 2007 ULTIMATE INSTALLATION: Installation product without incident until about 85-90% full, then stops citing Error 1935.
  Error Msg: "Error 1935. During the installation of the component {74FD3CE6-2A8D-0E9C-A01F-C8B3B9A1E18E} HRESULT: 0x800736B5. »
  System says then it restores changes and then gives the error messge "Error 1310."

  There is no answer to the 1935 specific or code for the 0x800736B5 to HRESULT error messages, but there are thousands of results for the 1935 error messages or 1310 General.  The actions proposed by these results are one) uninstall all earlier versions of Office, including the eligible upgrade software, I've done through uninstalling program and manually; (b) for .NET Framework 1.1 to repair or reinstall 1.1 or install version 2.0.  All THE proposed solutions have been tried, as the software was received on 08-11-09, but all have failed.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a doubt about the file .folio and publications

  Hello, I m new here.

  I want to start working with DPS, but I have a doubt about which version to buy.

  At the moment I have one customer just wants to publish a magazine, but my intention is to have more customers and publish more magazines.

  If I buy the unique edition of DPS, I read that I can publish a single file .folio. What it means? Each folio file represents a publication?

  Please, I need help to understand this before you purchase the software.

  Thank you very much

  Paul

  Here's a quick blog I wrote to compare the simple edition and

  multifolio apps:

  http://boblevine.us/Digital-Publishing-Suite-101-single-Edition-vs-multi-Folio-apps/

  Bob

• HP Deskjet F4580: Not sure about the error of the driver

  I get this error with my HP Deskjet F4580 printer that I have not the same right usb connectors install the drivers for it first?

  It was working fine before, but then I reformatted with a new motherboard and when I tried to reinstall the drivers this is the error I get, do not know what to do

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.

  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

  Now follow the installation and check for the difference.

  Kind regards
  Shlomi

• To see more details about the error

  Hello

  Breast of Toad 10, after that I compiled a Stored proc, I don't see that this

  https://DL.dropboxusercontent.com/u/40211031/T652.PNG

  How to see the details of the error here?

  Hello

  Wrong forum.  Try

  Toad for Oracle - general - Toad for Oracle - Toad World

  In some Oracle frontends (like SQL * more) if the following statement is

  DISPLAY ERRORS

  that will produce a meaningful error message.

• Doubt about the Index

  Hi all
  
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  "CORE 11.2.0.2.0 Production."
  AMT for Linux: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  I have a question about the index. Is - this required that the index will be useful if we have a "WHERE" clause I tried to find myself there but do not.
  In this example I haven't used where clause used but group. But it gives a comprehensive analysis. Is it possible to get the scan interval or something else using Group by?
  

  SELECT tag_id FROM taggen.tag_master GROUP by tag_id 
  
  Explain Plan:
  Plan hash value: 1688408656
   
  ---------------------------------------------------------------------------------------
  | Id  | Operation             | Name          | Rows  | Bytes | Cost (%CPU)| Time     |
  ---------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT      |               |  4045 | 20225 |     6  (17)| 00:00:01 |
  |   1 |  HASH GROUP BY        |               |  4045 | 20225 |     6  (17)| 00:00:01 |
  |   2 |   INDEX FAST FULL SCAN| TAG_MASTER_PK |  4045 | 20225 |     5   (0)| 00:00:01 |
  ---------------------------------------------------------------------------------------

  Hello

  SamFisher wrote:
  Since I was on what they do full scan. Is it possible to restrict of fullscan without using where clause?
  I guess having limit clause but not quite know.

  Why?
  If this query is producing good results, then you need a full analysis.
  If fool you somehow the optimizer by doing a scan of interval, it will be slower.

• Some doubts about the topology, interfaces and security modules

  Hello
  
  Below, some questions about the ODI:
  
  
  1. to use an LKM ODI always ask to use two different DATASERVERS (one for the SOURCE) and another to the TARGET?
  
  2. what would be the best way to create a new IKM with GROUP BY clauses?
  
  3. What is the required minimum PROFILE for developers users could import projects created in other ODI environments?
  
  4. If a particular WORK_REP is lost, it is possible that retrieve projects from version control information stored in the MASTER_REP?

  1.) Yes. LKM always loads data from one root to another.
  More than once I saw that even if there is a single physical server, several servers are configured in the topology Manager. This would lead to the use of a LKM because ODI consider 2 different servers.
  If the physical server is set only once, LKM won't be necessary.

  2.) IKM automatically adds a GROUP BY clause if it detects an aggregation function in the Interface implementation.

  3.) try to use the profile of the creator of NG.

  4.) this is not an easy task. But all the versioned objects are compressed and stored in a BLOB field in the master repository.
  You will need to know the names and versions you need to recover.
  SNP_VERSION and SNP_DATA have this information. Retrieves the field BLOB SNP_DATA and unpack using a zip utility. This will give you the XML property of the object that was transferred.
  Now, you can import this xml file and retrieve the object.

  You will need to loop through all the records in order of I_DATA, then extract to .xml file, and then import them to build the work rep.

• doubts about the css class...

  I tried to load a background image in the theme universal apex 5 in the login page.

  and I used the code found in the following link and got it works

  Apex 5.0: Theme Roller and background image

  But I doubt that can be very simple for the css professionals.

  .t-PageBody-.t-body connection

  {

  Background: URL("Sports.jpg") repeat top center white scroll;

  Color: #000000;

  do-family: Arial, Helvetica, Sans-serif;

  do-size: 12px;

  line-height: 17px;

  }

  .t - PageBody.t - body

  How do you know .t-PageBody - .t-body connection was the main class to change...

  Let me know if my interpretation is correct

  .t-PageBody - login is the main class

  and .t-Body is the upper class?

  
  

  pauljohny100 wrote:

  I tried to load a background image in the theme universal apex 5 in the login page.

  and I used the code found in the following link and got it works

  Apex 5.0: Theme Roller and background image

  But I doubt that can be very simple for the css professionals.

  .t-PageBody-.t-body connection

  {

  Background: URL("Sports.jpg") repeat top center white scroll;

  Color: #000000;

  do-family: Arial, Helvetica, Sans-serif;

  do-size: 12px;

  line-height: 17px;

  }

  .t - PageBody.t - body

  How know .t-PageBody-.t-body connection was the main class change...

  Let me know if my interpretation is correct

  .t-PageBody - login is the main class

  and .t-Body is the upper class?

  .t-PageBody--login .t-Bodyis a descendant selector. It matches any element with a class attribute that contains a t-Body value having an element ancestor with a class attribute that contains a t-PageBody--login value. There is no concept of 'main' class or 'slot' in CSS. The required selector is likely to have been determined on the supplement page using a web Inspector.

  It is advisable to take some tutorials to get at least a basic understanding of web technologies when you work with APEX.

• Some doubts about the navigation in unifying

  Hi all

  I had a few questions about unifying navigation.

  Is it possible to move the admin mode user mode access level?

  I mean, if a particular feature as Manager of the shell I can only access from admin mode is it possible to provide access even in user mode?

  If so, how?

  My 2nd question of doubt is, currently, we can access company BPs level "Journal of society" or "Resource Manager" under shell 'Company Workspace'.

  Is it possible to move the "journal of the society" or "Resource Manager" in the folder? If yes how?

  I tried in "navigation user mode" to move the company BPs level at shell of the House, but I can't do it.

  To answer your questions:

  (1) User-Mode browser can have the user feature included. You cannot change the view mode Admin or move functions admin for user mode.

  (2) you cannot move these on the Home tab.

• Doubt about the passage collection (Pl/SQL table) in a procedure.

  Hi all
  
  I have developed a package of sample with procedure 1. Here, I spent the output to a table in the collection data and I am passing the array of the collection as a parameter out.
  When I run the proc, it worked for 1 scenario, but did not work for the other. I posted two scenarios after the code.
  

  pkg spec:
  
  create or replace
  PACKAGE IMP_EXP_BKUP_PKG
  AS
    TYPE test10_tbl2 IS TABLE OF test10.t1%type INDEX BY BINARY_INTEGER;
    v2_test10 test10_tbl2;
    PROCEDURE manpower_list(v1 number, v2 out test10_tbl2);
  END IMP_EXP_BKUP_PKG;
  
  Pkg Body:
  
  create or replace
  PACKAGE BODY IMP_EXP_BKUP_PKG 
  AS 
  PROCEDURE manpower_list(v1 number, v2 out test10_tbl2)  AS
  BEGIN
    SELECT t1 BULK COLLECT INTO v2 FROM test10 WHERE t4 = v1; 
  END;
  END IMP_EXP_BKUP_PKG;

  Scenario 1:

  DECLARE
    v2 imp_exp_bkup_pkg.test10_tbl2;
  BEGIN
    imp_exp_bkup_pkg.manpower_list('10', v2);
    FOR i IN v2.FIRST..v2.LAST
    LOOP
      DBMS_OUTPUT.PUT_LINE(v2(i));
    END LOOP;
  END;

  Worked well.
  
  Scenario 2:

  DECLARE
    --v2 imp_exp_bkup_pkg.test10_tbl2;
    TYPE typ_tbl2 IS TABLE OF test10.t1%type INDEX BY BINARY_INTEGER;
    v2 typ_tbl2;
  BEGIN
    imp_exp_bkup_pkg.manpower_list('10', v2);
    FOR i IN v2.FIRST..v2.LAST
    LOOP
      DBMS_OUTPUT.PUT_LINE(v2(i));
    END LOOP;
  END;
  
  Error:
  ORA-06550: line 6, column 3:
  PLS-00306: wrong number or types of arguments in call to 'MANPOWER_LIST'

  Is not here.
  
  I want to just make sure that, are we supposed to use the same type that we have breeding stock in the package for the declaration of the variables?

  SamFisher wrote:

  I want to just make sure that, are we supposed to use the same type that we have breeding stock in the package for the declaration of the variables?

  Yes, you MUST use the same type definition.

  SY.

• A doubt about the alert Message...

  Hello
  
  I am very new to Oracle Forms & I use Forms 6i.
  
  As I practice some bases as 'Validation' a text element I went by a few examples of code to bring or poping-up alert messages...
  
  Here is my Code... in this I don't understand Y... .do write us the 'Message ('no msg')' line TWICE... ??
  
  Although I commented on the 2nd one... but there must write two times... & wat is the logic behind it...?
  
  Help, please...
  
  ---------------------------------------------------------------------------------------------------
  Begin
  
  If (: aijaz_emp_master.em_dob >: aijaz_emp_master.em_doj) then
  
  set_item_property ('em_dob', current_record_attribute, 'VA_ERRORS');
  
  -If (: aijaz_emp_master.em_dob is not null and (: aijaz_emp_master.em_doj >: aijaz_emp_master.em_dob)) then
  message ("DOB must b higher or NULL MJ '");
  -message ('wort upper b DOB or NULL MJ');
  
  raise form_trigger_failure;
  
  on the other
  set_item_property ('em_dob', current_record_attribute, 'VA_NOnERROR');
  end if;
  
  end;
  ---------------------------------------------------------------------------------------------------------

  MIRA,
  I agree that this can be a little confusing, but once you understand the difference between messages and alerts it will make sense.

  In Oracle Forms, a 'Message' is any information that is displayed in the 'Message' of the forms Console line and requires no interaction with a user. The console is displayed at the bottom of the window and includes the 'Message line' and 'Statue line. If the message line already has a message, and then forms will promote the message in an alert (popup window) and the nouveau/deuxieme message is displayed in the message line. In general, many forms developers will use this "Double-Message" method to display information in an alert because it is less lines of code to assign the text of the message in an alert and then display the alert. It is advisable to always call the built-in function Clear_Message() before calling Message built-in to prevent unintential * promotion message.

  An alert in a physical object in a form of Oracle (note: there is a 'Alerts' node in the browser of object of forms). There are three types of alerts of forms: Note, attention and stop. Display the notes information, precautions display warnings and errors off display program, or critical information. In order to display an alert, you must first create an alert object in the Alerts node. You can create an Alert object for each of your posts, but this creates clutter and can be confusing. I prefer to use three alerts - one for each type (Note, attention, Stop) and then programmatically set the title, the text of the message and the buttons (max 3). As you can see, there is more work involved to display an alert. In addition, the integrated Display_Alert() is a function if you need a variable to receive the value returned by the call to Display_Alert.

  Here is an example of using e-mail in the forms:

  /* Standard message */
  BEGIN
     Clear_Message;
     Message('Display in the Message Line only');
  END;
  
  /* Message to display Alert */
  BEGIN
     Clear_Message; -- make sure you don't accidentally promote a different message
     Message('Display in the Default Alert');
     Message('Display in the Default Alert');
  END;
  
  /* Message displayed in a Note Alert */
  /* Assumes an Alert of type "Note" has already been created. */
  DECLARE
     al_id      ALERT;
     al_btn    NUMBER;
     v_msg    VARCHAR2(200); /* Max Characters that can be displayed in an Alert */
     v_title    VARCHAR2(78);  /* Max title characters */
  BEGIN
     al_id := Find_Alert('Note');
     IF NOT ID_NULL(al_id) THEN
        v_title := 'This is an informational message';
        v_msg := 'This is an informational message that requires the user to acknowledge the message';
        Set_Alert_Property( al_id, TITLE, v_title);
        Set_Alert_Property( al_id, ALERT_MESSAGE_TEXT, v_msg);
        al_btn := Show_Alert( al_id );
     END IF;
  END;
  

  Personally, we have a library package, we have created to simplify the display of alerts and allows you to set the properties of the alert and display it in a single call.

  /* In this sample, I use named notation to
  illustrate the meaning of the different parameters
  in our wrapper package. */
  DECLARE
     al_button  NUMBER;
  BEGIN
     IF (:aijaz_emp_master.em_dob > :aijaz_emp_master.em_doj) THEN
        set_item_property('em_dob', current_record_attribute, 'VA_ERRORS');
        al_button := message_pkg.warning( TITLE => 'Warning: DOB Required',
                                    MSG_TEXT => 'DOB must b NULL or Greater tahn DOJ',
                                          BUTTONS => 'OK');
        raise form_trigger_failure;
     ELSE
        set_item_property('em_dob', current_record_attribute, 'VA_NOnERROR');
     END IF;
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere December 13, 2010 10:31

• doubt about the collection of object type

  Hi all
  
  I'm a newbie!
  
  I tried an array of type object index, as follows.
  
  declare
  
  type ty_tab is table of the directory index ty_test;
  
  v_tab ty_tab;
  
  Start
  v_tab (1): = ty_test ('ashok', 1000);
  v_tab (2): = ty_test ('rashmi', 2000);
  v_tab (3): = ty_test ('baby', 3000);
  
  for me in v_tab.first... loop of v_tab. Last
  
  dbms_output.put_line (v_tab (i));
  
  end loop;
  
  end;
  
  /
  
  While running the script above, I got the following error message.
  ORA-06550: line 14, column 8:
  PLS-00306: wrong number or types of arguments in the call to "PUT_LINE '.
  ORA-06550: line 14, column 8:
  PL/SQL: Statement ignored
  
  Can anyone suggest me where I'm wrong.
  
  
  Thanx

  DBMS_OUTPUT. Put_line argument is a scalar value. It does not composite types. You should pass the individual attributes. Assuming that ty_test is:

  SQL> create or replace
    2    type ty_test
    3      as object(
    4                name varchar2(10),
    5                val  number
    6               )
    7  /
  
  Type created.
  
  SQL> 
  

  Use:

  declare
      type ty_tab is table of ty_test index by binary_integer;
      v_tab ty_tab;
  begin
      v_tab(1):=ty_test('ashok',1000);
      v_tab(2):=ty_test('rashmi',2000);
      v_tab(3):=ty_test('baby',3000);
      for i in v_tab.first .. v_tab.last loop
        dbms_output.put_line(rpad(v_tab(i).name,11) || v_tab(i).val);
      end loop;
  end;
  /
  ashok      1000
  rashmi     2000
  baby       3000
  
  PL/SQL procedure successfully completed.
  
  SQL> 
  

  SY.

• Doubts about the merger of cache - PI (last Image) in the CARS

  We are Oracle 10.2.0.4 database configuration 2-node RAC on Linux x86_64
  
  I was going through the Oracle documentation and some books that were discussing on the merging of cache (reading-reading, reading / writing, writing-write, read-write behavior) etc.
  
  It was mentioned that the line lock is similar to that single instance so whevever a block is necessary an instance finishes its operation on the block and transfers the block to the other instance that requires exclusive access.
  What I realized, this is once the transaction is completed the first transfers to instance the block to the other instance to have exclusive access to this block.
  
  Also the first instance maintains a PI (last Image) of the block that she can use for read operations, but he can't change the block as he has transferred the block to the other instance and he only shared access.
  
  Now when a checkpoint occurs all instances should serve their IP so in this case, if the first instance is in the middle of a select statement that uses the PI of the block, what will heppen to the query, if it causes an error (something like snapshot too old)?
  
  I'm not able to understand the notion of PI and what happens during flushing data to disk blocks.

  Evelyne says:

  While I don't understand, what's the meaning of the Image here?

  A PI (last image) is a copy of the block which is known to have existed as the current version (CU) of the block at some point in the past-, then it can be used as starting point for recovery if the node that contains the current block goes down. If IP blocks can reduce recovery times in the database.

  In my view, blocks IP can also be used by the holder of the IP for generating local copies of CR without reference to DRM - if the SNA are appropriate. Thus PIs can also be used the interswitching traffic.

  Initially, there was a rule that when a node has written the courses block, it should send a message to all other nodes brand their IP copy as a free buffer (indeed, forget them) - although I saw a note once Oracle can change this option to convert IP blocks to the blocks of CR.

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  "All experts it is a equal and opposite expert."
  Clarke