Down 4K Rezing - codec 1080 p with 50 MB/s?

Similar Questions

• Daisy chaining for 2 PrecisionHDMC 720 p cammera with 1 PrecisionHDMC 1080 p, with the codec C90

  Hello

  Is it possible to daisy chaining for 3 cammeras having different resolutions, with the codec C90?

  2 PrecisionHDMC 720 p cammera with 1 PrecisionHDMC 1080 p, with the codec C90

  Thank you very much!!

  Hi Moreno,

  Control of the camera uses the visca Protocol, it is same in both cameras.

  I tested previously and she works in the laboratory.

  Kind regards

  Dharmmesh

• BEFORE El 13: What codec to export images GoPro 1080 50 p? Import and editing work wonderful. Export does not codec 1080 50 p. I took 25 1080 p instead. Rendered film seems odd.

  Import and editing work wonderful. Export does not codec 1080 50 p. I took 25 1080 p instead. Rendered film seems odd.

  What codec is better to use for minimum redisplay and play on TV (Europe) or a PC?

  sunsetblind

  What operating system executes your 13 items first?

  Were you aware of the tab button/video advanced for that you select under Presets?

  Here you can customize the preset... If you want 1080 p 50, example

  Publish + share

  Computer

  AVCHD

  with Presets = MP4 - H.264, 1920 x 1080 p 25

  then, under the advanced settings of this preset button/video tab, customize 1080p50.

  Do not hesitate if you have any questions or need any clarification. We need to examine the full

  Details of your project (import, edit, export) If you see irregularities beyond not being able to

  NEC 1080p50.

  Thank you.

  RTA

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• When I try to burn a movie, my computer shuts down. This didn't happen with more short films, but this one is about 84 minutes.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  When I try to burn a movie with videos imported from different sources, the computer shuts down after 10 minutes.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  limespider wrote:
  When I try to burn a movie, my computer shuts down. This
  didn't happen with more short films, but this one is all
  84 minutes.
  =======================================
  Sounds lke a question of system resources.

  Large, complex projects can cause problems... it can
  be worth a try to create several small projects and save
  each of them in the format .wmv movie to a folder on your hard drive
  drive. When you import clips .wmv collection in DVD
  Machine to each of them becomes a scene (chapter)... you can
  have up to 18 scenes.

  Besides rendering video is time CPU and could
  initially be an overheating problem that could also result in your
  computer to close.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can we replace the primary codec CTS 3000 with CTS 1000 codec

  Hi all

  Please correct me if I'm wrong.

  Physically CTS 1000 codec and CTS 3000 Primay Codec is the same air, I would like to know what is the difference between the two codecs.

  Suppose if I replace the main codec CTS 3000 with codec CTS 1000 it'll work?

  The difference is only between the firmware... ??

  If I try to download the firmware CTS 3000 in CTS 1000 codec does?

  Also add codec CTS 1000 in CUCM as Codec CTS 3000?

  Kind regards

  Nikhil Jayan

  Nikhil,

  Are the only thing you need to know about 2 codecs GEN 1 or GEN 2. On the GEN 1 all the microphones connect to the primary codec. On the Gen 2 microphones connect through the audion expansion area. You can see the difference on the codecs on the Gen 2, you can see 1 connection for the Center microphone and a connector square for the cable to the AEB.

  Other codecs are exactly the same. Endpoint gets its configuration file in Communications Manager. So once go you MAC address and restart the endpoint it will go the new configuration file. If you use a CTS Manager, you will need to go into the Application user in the CUCM and move the MAC address of available for controlled devices. You will then need to make a discovery of the room in the CTS - Man.

  The firware for both codecs are the same.

  I hope this helps out.

  JD King

• Is there a way to access more of my codecs to render with AE 4.1?

  Hi all

  I am a new user using an older version of AE 4.1 on Windows 7.

  Is there a way to access more of my available codecs to render with AE 4.1?

  When I go to export in an AVI file in AE 4.1 I've only CINEPAK, DV-PAL, DV/DVCPRO-NTSC and PAL DVCPRO codecs available as a choice, click NONE for no compressed images.

  Yet when I visited to AVI in Adobe Premiere, I the CAMSTUDIO LOSSLESS, CINEPAK, INTEL IYUV, HUFFYUV and LAGARITH LOSSLESS, MICROSOFT RLE, MICROSOFT VIDEO 1, MSU SCREEN CAPTURE LOSSLESS, x264VFW - H.264 / MPEG-4 AVC and available to view with XVID MPEG-4 codecs.  I usually use the XVID MPEG-4 codec to render with for optimal quality for the size of the file, or the codec LAGARITH LOSSLESS to render with if I need to connect a file first since first verse has limited capacity to import the AVI file codec.

  Why aren't the rest of my available codecs to render with AE 4.1?

  The problems are (as seen in the screenshots below)...

  (1) the CINEPAK codec makes the correct file size and format that my project is (1280 x 720), but generates an AVI file that can not be imported in to first and cannot be converted by two different converters.

  (2) the option NONE UNCOMPRESSED makes the file size format correct but outputs an AVI so big (6 concerts) that can not be use practically in first and it will not play even in a video player.

  (3) return codecs DV-PAL, DV/DVCPRO-NTSC and PAL DVCPRO format incorrect and sizes of format (770 x 576) without worrying about what proportions is selected (as seen at the bottom of the screenshot below), resize the size of my project and they will not matter first... these peut be converted an AVI H.264 file in one of my converters first will then import , but they are always the right size and they lose sharpness if they are resized (stretched) when converting.

  Please see the screenshots below for details.

  

  Thank you for any input,

  Digi
  

  Do not use the file/export option.   Use the Composition/sequence, then define your needs of output in the render queue.

  I would recommend the export of lossless files.  Codec Animation QuickTime (100% quality) was my fav back in the day.  If the files are too big, try Quicktime PhotoJPEG at good quality.  Or, make AVI uncompressed as you have and use an external encoder to convert the first requirements.  Do not use H264, it is a codec of final delivery and should not be used in your post production workflow.

  Moreover, returned to the native resolution and codec you use in your creative projects.  First will not import your DV file because the resolution does not - DV PAL must be 720 x 576 pixels, regardless of proportions.

• Codec C90 Cisco with Mulitple camera

  Hello

  I'm having a problem with the secondary camera is discovered on C90 codec (v7.0.2), two of the camera is connected and HDMI1, HDMI2.

  IAM get selfview main camera only. The two camera is connected in chains and able to control.

  Is there any configuration required to activate the secondary camera of the codec to display free.

  The camera is precision 1080 12 X.

  TNX

  Bobby.

  You can change the source of the main camera using one of the following options:

  The remote control of the menu (don't remember the exact location).

  The web interface, and on the page of call control, the configuration page of the system in the video options.

  The serial port or SSH, you can issue commands directly on the codec to change the camera to help source xConfiguration Video MainVideoSource .

  Don't forget Wayne said, you can have a single camera selected at any time, therefore, you will see whatever the camera is selected as the primary source, unless you use Console TC composite multiple cameras in a single stream to display on the screen.

  https://developer.Cisco.com/site/collaboration/Telepresence/AV-Integrator/tools/TC-console/TC-console.GSP

• Choppy video export, DNxHD Codec 1080 p 24 fps

  Hi all

  having a problem exporting my video.  I tried a large number of parameters, but I'll give you a summary:

  in MPEG, h.264, audio keeps get synchronized.  In addition, appropriations twinkle pretty bad (I'm using a Photoshop file and it scrolling to the top of the screen with position keyframes)

  I also tried to export in Quicktime MOV format, using uncompressed YUV and DNxHD codec.  I have been using the project of 1080 p 24 fps downloadable predefined found here.  I got the software codec here.  When I export the video, it plays back very choppy in Quicktime 7 player.  Is this just a problem of Windows?  He would play smoothly on a Mac?

  Toshiba Satellite intel core i3 4 GB ram Edition on a 320 GB internal hard drive, backup on a 1 TB USB 2.0 external drive (edition was in fact run smoother when the source files are on the internal drive).

  images of canon rebel t3i 1080 p 23.98 FPS

  Any help is appreciated.  Thank you

  The biggest problem is that you're editing 1080 p 24, something which is not supported in Premiere Elements. You're very probably see interlacing issues.

  What project settings that you see in the release/project preferences?

  I would say that everything indicates that this plugin preset does not match your video source.

• Update the drop-down menus and jQuery sortable collide with the 16.0.2

  The drop-down menus that are contained in a table sortable jquery act as if they are disabled. By clicking on them, doesn't matter. I can tab in the menu drop down and control it with the arrow keys, but the mouse does nothing. The menus outside of the table still work very well. This problem only occurs in Firefox 16.0.2 on several computers, all equipped with Windows 7. The problem does not occur in IE9, Chrome or Safari. In addition, the problem does not occur in Firefox 15, but it occurs in Firefox 17 Beta. I did not see anything addressing this specific issue, so I guess this isn't a known issue.

  The problem has been resolved.

• I want to record 1080 p with my Lifecam Studio, this software is available?

  Hello

  I recently purchased a Microsoft LifeCam Studio 1080 p. I understand that the software provided record in up to 720 p.

  I'm looking for a software that will allow recording 1080. I am currently trying to connected to my Macbook Pro right now.

  My office is an Intel Core i7 920 @ 3.33 ghz with 12 GB of memory and a 2 GB XFX Black Edition 5970. So more than powerful enough to handle the hard power draw record 1080.

  In advance, I appreciate a lot of help.

  Kind regards

  John

  Hello

  See this link-

  http://Techland.time.com/2010/09/17/quick-look-at-Microsofts-LifeCam-Studio-1080p-webcam/

• How do you get Speedgrade recognize h.265 codec as first with the new update?

  The new update allows users to first now edit in h.265 with no transcoding to Apple ProRes 422, or whatever you use for editing. However, I personally am not able to open the file h.265 in Speedgrade. Does anyone else have this problem? Is there a way to bypass this incompatible codec between first, Speedgrade and codec h.265 on a mac?

  Confirmed... as has been pointed out by Sekhar, Adobe sent the mp4 'bad' in SpeedGrade importer. dummergold, PLEASE remember this! You're an absolute gem to have here!

  Copy one of the programs/Adobe/Premiere Pro Plugins/2015/Common... file: ImporterMPEG.prm

  At the same place to the SpeedGrade, instead the file slightly more small in SpeedGrade, re-boot Sg and voila... There are pictures HEVC in SpeedGrade!

  Neil

• What is the best codec to edit with Premiere? I use a Canon 7 d.

  With Adobe Premiere, I read that you don't have to transcode your images to change, but is BETTER? Cup people say it is better to transcode your footage in h.264 to apple pro res in order to get images of superior quality. Is true even with first? Is it better to change your film to a different codec before editing it? FYI, I use a Canon 7 d.

  Transcoding will be no better than the native work.

• How to get a selection of drop-down list to complete another field with nothing

  Hello

  I have a drop down menu that fills another field according to what is selected (as shown here where Admin mistakes fills the next field with 6735-10-01).

  

  However, there are 3 items in the drop-down list that I don't want to fill in the other with (basically, it must be empty during one of these 3 elements are selected, in contrast to how it returns zero in the example below). I don't know what to put in for the values to make it white.

  

  Please notify.

  Kind regards

  ZeroZone

  I don't know what your code looks like or where it is but you will need to add a conditional statement, such as:

  If (DropDown.rawValue == "0" | ") DropDown.rawValue == "1" / * | "" etc, etc, * /)

  TextField.rawValue = null;

  on the other

  TextField.rawValue = DropDown.rawValue;

  Kyle

• IDT - Audio - IDT High Definition Audio CODEC-updated, problems with the audio

  I recently installed successfully IDT - Audio - IDT High Definition Audio CODEC and after that none of my audio worked. Everything indicates that the audio is working as usual, but no sound. Also, when I did a test "sound" in the control panel > sound, it is said "the test could not be played. (Translated from Finnish Windows Vista, but anyway). I went to IDT Audio settings (from the bottom right icon) and noticed that my headphones and speakers had been cut so I removed the 'secret' of these two, but nothing happened. I tried to restart the computer several times and recheck the IDT Audio settings but nothing found which could cause the problem.

  Hey Andyy27,

  My HP Support Assistant tried to make me update this driver I have the computer in mid-August.  Same thing; whenever I have install the driver, there is no sound either - I have not known what you mentioned above on the sound slowly disappears.  Thahaseena, good to have you hear.  I am running Windows 7 family on a HP Pavilion dv6 Notebook PC.  After installation, there is no request to restart or stop to install updates; my sound card lists an error and I have to roll back the driver to make it work again.

  My driver date is January 13, 2010, version 6.10.6265.0.  It's one that I continue to back and it works.  I will install the update now and tell you what I get for audio driver is not working.

  The properties of my IDT HD Audio CODEC says:

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  You must restart your computer before the changes made to this device will come into force.

  New driver that disables my sound: June 17, 2010, version 6.10.6289.0.  Well now, it asks me to restart, but I'm not having good hope... will write if this time it solves the problem (4th time charm?).