Downgrade the level of BusinessCatalyst

Similar Questions

• How can I check the levels of ink on deskjet 2050 on Windows 8?

  How can I check the levels of ink on deskjet 2050 on Windows 8?

  Hello

  If you do not have the full features software download and follow HP printer Installation Wizard to obtain and install the latest version of the software automatically:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us & LC = on & JumpID = ex_r4155/HHO/IPG/ccdoc/piw / & softwareitem = MP-115766-2

  Once you have the complete software use the Hp software to locate the estimated ink levels, you can access it from Windows 8 start screen by clicking on the icon HP Deskjet 2050:

  http://support.HP.com/us-en/document/c02049595

• How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)

  I have just flashed the BIOS on my Satellite Pro P100 4.8.

  The CPU runs at 100%. (90% + for windows explore)

  Only a single core is recognized by my Vista gadget.

  85 CPU temperature

  How can I "downgrade" the BIOS? Where are the older versions?

  When the new BIOS version is available to download older versions are not available more.
  What Satellite Pro P100 you exactly (model name, model number)?

• How downgrade the BIOS on Tecra S11 - boring CPU

  I have a BIOS that is "solve" the problem of high pitched noise high on the i5 CPU.
  But I have the latest version of the BIOS and since then I can not downgrade to the older BIOS which allows to "solve" the problem.

  * My question is how do I get the BIOS? *
  Because I send my Toshiba to RMA more because they will not fix it!

  My Tecra S11 went to RMA 2 × and 2 different authorized Toshiba service approximately 1 month partner. None of them repaired my laptop! More annoying is that the Hungarian services are absolute useless! I have a 2 year problem, with the high pitched noise high CPU.

  They have not replaced the defective processor, they replaced the motherboard! for no reason. OMG!
  Be very careful when you buy PC Toshiba laptop in Hungary and is not due to lack of the Toshiba but authorized service partners!

  Please, Toshiba do something!

  Hello

  Why do you think that CPU must be replaced?
  I guess that the technicians ran some diagnostic tests which can detect defective parts, I guess the CPU was not affected, but the real question was the motherboard (because it was replaced).

  However, what s your problem exactly?
  Why you want to downgrade the BIOS?

• How downgrade the BIOS on Portege Z30 - B?

  Hi all

  I updated the BIOS on my laptop Z30-B-119, and it is much worse than the original BIOS, so I want to downgrade it.
  There is no way to save the original BIOS during the update and the previous BIOS is not available on the site.

  Someone has the original BIOS and knows how to extract?

  Maybe someone knows how to contact Toshiba technical team directly? (Don't see what they have implemented in new BIOS, I have no hope they read on this forum or user opinions).

  If you're wondering why I want to downgrade and what's wrong with him, see below for an explanation.

  I was convinced that the new BIOS might resolve the problem with the fan, which works well too early, but it turned out they made much worse! The fan will now light at 42 °. Seized 50 °, which was already a Toshiba engineers stupid choice, provided that the side of the CPU temperature is 105 °, so that they could keep the laptop quiet at least until 60 °, especially as many people's complaint of the fan in this model. Instead, Toshiba has done the opposite and lowered the temperature even more.

  How foolish choice their engineers do, I will never buy another Toshiba and will not recommend anyone buy their products. But since I have already made the mistake one bought a Toshiba laptop, I hope that I will be able to downgrade the BIOS or contact them to request an update.

  Let me know if you know how to do it.

  Toshiba Portege Z30-B-119 PT253E - 01100XPL
  This European model belongs to the PT253E series

  The Portege Z3x - B PT253U (same model) was released in the United States and it supports the same BIOS

  The BIOS for the PT253U is compatible withE -PT253 and can be downloaded here:
  http://support.Toshiba.com/support/v...tentId=4007631

• Satellite A200 (PSAE6) - I want to downgrade the BIOS

  Hello and sorry for my bad English (I'm french nobody's perfect ^^)

  I want to downgrade BIOS because since I install 2.6 on Vista 64, I have a lot of freeze (PC freeze 30 seconds each about 5 minutes). After updating the BIOS, I don't have this problem.

  So if you know where I can download version 2.5 or 2.4 BIOS, you save me the life.

  Thank you very much and excuse my English again.

  Hello

  > After update BIOS, I don't have this problem.
  And why you want to downgrade the BIOS?
  Sorry, but it's a little confusing.

  Anyway, a BIOS upgrade peut t be done. As far as I know that this can only be done from an authorized service provider.
  Contact the nearest, explain the situation and technicians will help you.

  Welcome them

• Use the level of battery to only 7% of the first week.

  I just bought a Toshiba NB250 about a week ago

  I was checking my autour hardware and installed Notebook Hardware Control and she showed me the level of wear on a battery of 7% only in the first week.

  Why is this? Is this normal? I have my Qosmio X 300 for a year now and its battery wear level is 0%

  What is the level of minimum wear acceptable to be responsible for the change of the battery under warranty?

  Thank you!

  > What is the level of acceptable minimum wear is responsible for the change of the battery under warranty?
  It is a very complicated issue and I don't think that someone here will give you an accurate answer to this question.

  Notebook hardware control is good tool but if this tool is really relevant is another question.
  What is the maximum length for computer laptop battery power?

• Satellite A200 - cannot downgrade the BIOS to v2.40

  Please help me.

  I bought a brand new toshiba Satellite A200 series laptop with vista home premimum inside.

  For some reason, I'm not a fan of big vista.
  So I lowered my XP OS and as I was looking for pilots and all this for XP I saw an update of the Bios for my laptop it's 5.20 which was for XP. Although for Vista its 2.40 as per mentioned on the Web site.

  Now where my problems began.
  I downloaded this v5.20 bios and updated.
  Soon the problems began as laptop is overheated, it freezes and sometimes refuse to give performance.

  As I was unable to find all my drivers for XP I switched to Vista using my recovery DVDs. But the problem remains the same with Vista too, so finally, I took my laptop to a Toshiba Service Center.

  They have said that it is a motherboard problem so they fixed, but they have not set the Bios.
  I still v5.20 on my machine.

  I tried to go down to v2.40 but it always shows an error.

  Can someone help me pls... I am able to boot with a USB but I don't have a version of DOS of Bios v2.40.

  Please if anyone can provide me with my version of the bios.
  I'll be grateful to her for ever.

  Here are my system specs.

  Date 2009-01-26 03:04:19

  [Information on PC]
  Model name Satellite A200
  Part number PSAFCL-01M00P

  Not even this when I buyed the laptop he showed me 749 something like a shared graphics memory now it shows only about 399.

  I know that it is simply because of this update of the Bios.
  Now I am not yet able to play good games.
  This machine is almost useless for me now.

  No help from you people will get.

  I put t know why you want to downgrade the BIOS.
  Have you read the information on the site of Toshiba for BIOS version 5.20? I created this:
  > Support Windows XP and Vista OS

  So I think that you should not downgrade the BIOS. The most recent BIOS 5.20 is for Windows XP and Vista.
  You can find this information on Toshiba Asia because you have the model of Asia (not Europe):
  http://www.PC.Toshiba-Asia.com =>
  Update BIOS version 5.20 Satellite A200 (for the PSAF0-* & PSAFC *-* ONLY)

  The Toshiba Service Center did a good job with the latest BIOS.

• Pavillion DV4: Does not increase the level of battery

  Laptop is connected however increases the level of the battery, even when the laptop is turned off. I already tried a new battery and a different charger, I already tried to uninstall and update the drivers of battery, bios update, update Windows 7 and nothing has worked.

  I would try all the possibilities before you send the laptop to someone else attempt a repair.

  Thank you.

  Seems to be a problem with the motherboard, charging function, but unfortunately my laptop is an old unsecured more.

  I hope that all the other steps described in the post can help others with similar issues.

  Thank you.

• gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the macbook pro battery retina start

  gauge the battery to the boot screen and battery on report menu conflicting Details about the level of the battery. The gauge from the battery to the Starter incorrectly displays the low battery level that prevent the start of the battery. This happens on macbook pro retina 13 inches

  When I try to startup macbook pro retina in battery mode, it will fail to start showing low battery level and an indicator to recharge the battery. It does not start on battery. When I then connect via the power cable at startup (and check the battery level), monitor of battery in the menu bar indicates that the battery is charged to the top.

  It gets really frustrating and remove my ability to use the macbook pro retina as a truly portable device...

  Appreciate any help on this

  Have you tried resetting the SMC? Reset the management system (SCM) controller on your Mac - Apple Support

• Downgrading the OS of Windows 8 for Windows 7 in the HP store during the warranty period

  Bravo 0 I want to know I have a HP Pavilion
  15 n010tx Notebook PC with Windows 8
  OPERATING SYSTEM. If I want it downgrade to Windows
  7 OS and take to HP Store would
  downgrade the OS to Windows 7 and
  Install any drivers required for what is within the warranty period? Please I am
  waiting for the answer.

  Rintzzz

  Hello:

  I gave you all the information I can.

  HP does not support your model for W7.

  If you want to do the work yourself, I have provided links to the drivers I think should work.

  If you are nervous about doing the work yourself, then I wouldn't do it.

  I don't have your model of PC, and I have not personally tried to install W7 on this model of PC.

  But I gave these drivers to the other members of the forum with PC that have the same hardware, and they have all the success.

• Magic keyboard not showing is not the level of battery in the keyboard preferences.

  My apple Magic Keyboard stopped showing the level of the battery is in the keyboard preferences.

  I think it happened when I had a wired mouse keyboard and mouse bluetooth both keyboard plugged in at the same time.  Anyway, how can I solve this?  I tried to restart the computer, nothing has changed.

  In debug mode, I tried "reset module bluetooth", "factory reset all connected devices ' and 'delete all devices '.  The problem persists.

• How to increase the level of Effort BY?

  Hello

  I am trying to restore a primary application of a number of separate projects of component LVFPGA LVFPGA.  Each of these smaller basic functions is running in their own SCTL in new the LVFPGA master file.  Small functions all meet them timing, but not the master app.

  I use about half of the chip so it seems to me that it should not be difficult to place and route.

  When my compilation fails because of time constraints, he says the following:

  WARNING: By: 62 - your design did not meet calendar.  Here are some suggestions to help you to keep to the timetable in your design.

  ...

  Increase the setting of the level of Effort BY to 'high '.

  Use the 'xplorer' Xilinx script to try special combinations of options known to produce very good results.

  See http://www.xilinx.com/ise/implementation/Xplorer.htm for more details.

  So my questions are:

  (1) how can I increase the level of Effort BY?  Has NEITHER provided a hook for setting this value and if so what is its current level / by default?

  (2) we access level user to the script 'xplorer '?  If so, where is this located and can OR recommend some parameters that are compatible with the SMU-5641R.

  Thank you

  The files in the folder of Xilinx are never overwritten or replaced, these default values are simply not used if you provide your own .opt files to the compilation sequence. For these two products, we provide custom files, I've already mentioned. These custom options are communicated to the server during each request compilation as it must have everything necessary to provide correct results regardless of compilation locally or remotely (or even on a remote compiling the server who has not installed the drivers from target).

  Insofar as you need exactly what settings level effort, which will be dependent on the design. I suggest you look at Xilinx documentation on their suggestions on how to set these options based on what kind of compile questions that you hit. In general, I would try them likely increases in the following (probably with compilation time) order:

  "" plan of access-Calendar - ol std' and ' normal - ol std ".

  'map - calendar - ol high' and ' "normal - ol std".

  "map - calendar - ol high' and ' by - ol high."

  [Or if you will just operate all night and don't care about compile time, you could jump to top/high... and work backwards if you want to use the minimum effort it takes actually.]

  If these don't work for you (or if you want an alternative solution), then you need to review your design and your code to see if you can improve the synchronization in the areas which are at the origin of chess.

  Side-note:

  Modifying the files in the directory of Xilinx does not apply to this situation. I do not know the behavior to change these files, but it would be easy to deduce by experimentation (i.e. edit the file locally, perform a remote generation, see if the changed options were used... If not, then restore the local file, the remote file instead, rebuild, etc.). But even once, it does not apply to these objectives and behavior will be verified based on file by a specific version of LabVIEW file, since it is an implementation detail that may change.

• I need to generate 3.3 V logic level Digital train of pulses with the NI PCI-6221. Can I change the level of 6221 OR logic output?

  I need to generate 3.3 V logic level Digital train of pulses with the NI PCI-6221. Can I change the level of 6221 OR logic output?

  The output cannot be changed. 5V to 3, 3V level controllers are readily available (Maxim, I think). As long as the scanning speed (etc.) is fast enough for your pulse train, even 3, 3V regulator would work. I don't know if NEITHER offers a module to condition TTL levels.

• What is the level of output voltage of the NI 622 X

  There is no clear definition of the level of output voltage of cards X NI DAQ 622 in the spec.

  Are they drain open output? What is their level of voltage? The programmable ETC, voltage level is able to be configured to 3.3 or 5V?

  Look at the graphs on page 8.  This is not the usual way of Voh specification, but is is very informative. Other charts display different values from the DMV.

  

  Lynn