downgrade to windows 7 64-bit on the desktop hp Pavilion p7-1534

I need drivers for the upgrade to windows 7 64-bit on the desktop hp Pavilion p7-1534

Hello

It is not recommended to decommission a Windows 8 UEFI active PC.  However, the drivers for this HP p7-1297 c PC should work.

You also need to make changes to the bios.  Review of this article.  Enable and disable the secure startup and quick start if activated.

Under the DIRECTION of correct errors.

Tags: HP Desktops

Similar Questions

  • install Windows 7 64-bit of the NIDAQmx

    I try to install the latest driver NIDAQmx 9.2 on Windows 7 64-bit. The Setup is for multiple OS, including Windows 7 32-bit and 64-bit. When I try to install it, the installation program indicates (x 86) C:/Program Files /... When I try to force C:/Program Files /... Windows itself refuses because the software is not compatible. I saw simular behavior of the installer for the GPIB.

    Question: the pilot include a 64-bit version or is a 32-bit version that is compatible with Windows 7 64 bit?

    Question: If the installer has a 64-bit version, can I choose which of these versions, it installs?

    Question: If the installer has a version 64-bit but selects default 32-bit even for Windows 7 64-bit, what should I do different?

    Hi, JGS,.

    Yes, this Setup program supports 32-bit and 64-bit operating systems.

    The folder specified in the "Directory of Destination" dialog box is the default location for all software OR install. Please note that Setup of the NOR-DAQmx driver has more than just the driver files * itself, and a large part of these other records are either used by applications 32 - bit or 32-bit software itself (i.e. NI MAX). (Due to the way Windows works), this means that this folder can be (in the folder Program Files for 64 - bit). However, you can change the default location for any other place (e.g.) C:\ni or C:\Program Files (x 86) \myFolder).

    For the actual driver files, they are automatically installed to the appropriate locations of SystemFolder (sysWOW64 or system32). This allows you to run 32-bit applications on 32-bit and 64-bit operating systems using the same NOR-DAQmx Installer.

    I hope this makes sense. Let me know if it doesn't.

    See you soon,.

    Ecleamus R.

    Software in English

  • Hi, I have Windows 7 64 bit G72, the sound continues to go up, I ran several anti virus, t

    Hi, I have a G72 Windows 7 64 bit laptop, the sound continues to go up, the system restore does not work, I tried several anti virus, nothing shows. I tried the sound diagnosis of HP and it works either, please help

    It is usually a very reliable laptop and gives normally no problem.

    Hi all

    success Finally, it seems to be a fauly mouse as when I use the keyboard to computers I have no problem at all.

    Sincere thanks to all who tried to help.

    Thank you very much

    Mijdoog

  • How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

    How to fix Windows 7 32 Bit error: the trust relationship between the th workstation and primary domain failed

    Hi João,.

    To help solve the problem, remove the PC from the domain and then connect the computer to the domain.

    Click the Microsoft KB Article below for troubleshooting steps.

    The trust relationship between this workstation and the primary domain failed

    Let us know how it goes.

    Thank you

  • Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

    I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

    My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

    Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

    the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

    INSTALLATION AND USE RIGHTS.

    a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

    b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

    c. number of users. Except as provided in these license terms, only one user may use the software at a time.

    d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

    Resources:

    Please see the following article with useful information about dual-boot:

    http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  • I need MS Bluetooth Enumerator to give window 7 32 bit.please the link for the download.

    I need MS Bluetooth Enumerator to give window 7 32 bit.please the link for the download.

    Hi Nicolas,

    Thanks for posting your question in the Microsoft Community forums.

    The description of the problem, I see you want to install the Bluetooth on Windows 7 enumerator.

    Provide us with a few details in order to better understand the issue.
    1. What is the number of brand and model of the computer?
    2. what exactly is the problem you are having with the Bluetooth device?
    3. do you receive any error messages?

    Note:
    Microsoft Bluetooth Enumerator comes into play when you connect the Bluetooth device unless the coach in which Windows 7 automatically installs the driver.

    After that Windows detects the Bluetooth device, it is controlled by Microsoft Bluetooth Enumerator and not the third-party driver.

    Here's a way to install the Bluetooth driver released by the manufacturer to resolve the problem. I suggest trying the steps and check if that helps.

    Method 1:
    I suggest you to rename the %WINDIR%\inf\Bth.inf to Bth.bak before you install or reinstall the battery or third device.

    To rename the file, follow these steps:
    (a) click Start, click run, type %windir%\inf in the Open box, and then click OK.
    (b) right-click Bth.infand then click Rename.
    (c) Rename Bth.inf to Bth.bak, and then press ENTER.

    Method 2:
    Download and install the latest version of the driver Bluetooth of the manufacturer's Web site.

    Method 3:
    If the problem persists, I suggest you to update your Bluetooth driver on the manufacturer's Web site.

    (a) click Start, typedevmgmt.msc in the Open box and then press on Enter.
    (b) locate the device.
    (c) right click the device and then click on Update driver.
    (d) follow the steps that appear on the screen in the Hardware Update Wizard to specify your own driver for the Bluetooth device.

    Reference: Updating a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Let us know the status of the issue after you perform the troubleshooting steps. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.
  • I have windows server 2008 R2 and windows 7 32 bit on the same network. But I couldn't see the server on the network.

    I have a windows server 2008 r2 server and windows 7 32 bit on the same network.

    I couldn't see the server on the network and

    also I could not access the workstation to the server.

    not more than one device must perform NAT

    Hi Bruce,.

    Given that you are working on Windows server 2008 R2, please post your question here:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem

    Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?

    Hello

    Please see try to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

    Hope that helps!

    Kind regards

    Sheena

  • Installation of Windows 7 (64 bit) on a 500-089 Pavilion

    Hello...

    The computer is a HP Pavilion 500-089 with an AMD A10 CPU, Radeon graphics card, card mother MSI MS-7778, containing the chipset AMD A75 and 8 GB of RAM. The vehicle is currently Windows 8 is installed on the hard drive.

    I would like to install Windows 7 (x 64) on the partition where Windows 8. I would do this while keeping my recovery and other partitions intact, just as it has been partitioned at the factory. In other words, I want to keep the GPT partition table, it came with.

    I want to be sure about the BIOS settings, that I needed to change to it. My view is: 1) disable Secure Boot in the BIOS (the UEFI firmware) under Secure Boot Configuration, 2) Enable Legacy Support

    Then I'll be able to start the installation of Windows 7 (64 bit) of the DVD, and will my GPT recognized and uncompromising of the installation?

    I know running Windows 7 does not have any support from HP. That's why I need to keep the GPT and all partitions intact original.

    For what it's worth, I would also suggest HP seriously consider adding Windows 7 to their list of operating systems supported on other computers 'Windows 8 '.  W7 is a proven operating system.

    Hello

    Yes, if you meet the two steps that you mentioned before installing Windows 7, it should work fine. But owning a www.hp.com and download the necessary drivers before installing Windows 7. So that you don't have to run around to download drivers once you install Windows 7. If you have problems during the installation, you can read back the same message.

  • In windows 7 and noticed on the desktop icons, below the left most of my icons are circle red.

    Have windows 7 and noticed on the desktop icons, below the left most of my icons are red circle or square with a white cross in it, what it means?

    Hello

    Could you provide a screenshot, desktop icons?

    The circle has a strikebar through it?

    What antivirus do you use?

    (1) reboot and start typing the F8 key

    Select Mode safe mode with networking

    Download the following and run a full scan

    http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

    This is to remove the malware invade the system.  Reset when the scan is complete.

    Run the System File Checker

    Start > type CMD > right click on CMD > select Run As Administrator

    Type sfc/scannow

    Press enter

    Use the System File Checker tool to repair missing or corrupted system files

    https://support.Microsoft.com/en-us/KB/929833

    This occurs when the .ico association is corrupt.

    To resolve this issue, follow these steps:

    1. Click Start, click run, and then

      Type regsvr32 /i mshtml.dll
    2. Click OK or press the ENTER key.

    https://support.Microsoft.com/en-us/KB/968486b

  • I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

    I used the snap, but went too far with the mouse that has placed the window out of view on the desktop. How I suddenly back

    Try clicking on the Chrome icon & press f11 to maximize the screen.

    Kind regards

    Nicholas Lee Fagan

  • How can I downgrade from Windows 8 64-bit for Win8 32 bit on my HP Envy?

    Bought the HP Envy for my children, but their favorite a few months ago game requires a Java Update, which is not available for 64-bit Windows 8. We waited for an update is available, but it looks like it will take another few months...

    So we decided to restore the system and wanted to change to 32 bit. Unfortunately, during the restoration there was no option to select 32-bit instead of 64-bit.

    What can we do to downgrade successfully to 32-bit on Windows 8?

    afgorkids,

    Welcome to the HP Forum.

    I admit that I might be missing your point, so bear with me...

    This is an excerpt from Java to Windows 8 FAQ page:

    Why only I get the 32-bit JRE when I go to Java.com?

    Java.com offers a version of Java based on your browser and operating system (OS). If you are running a 64-bit version of Windows 8, you have access to 32-bit versions and 64-bit Internet Explorer 10 on your system. The desktop version of Windows 8 operating system does not run in 64-bit mode (unless you have improved in Internet Explorer 10 on Protected Mode), Java 32-bit is the default value.

    Java downloads for all operating systems

    Windows which should I choose?

    Windows (32 bit) offline
    file size: 27.8 MB
    Instructions
    After installing Java, restart your browser and check that Java has been installed correctly.
    Windows offline (64-bit)
    file size: 29.3 MB
    Instructions

    We have detected that you may be viewing this page in a 32-bit browser. If you are using 32-bit and 64-bit browsers interchangeably, you need to install Java 32 - bit and 64 - bit in order to have the plug-in for both Java browsers. " FAQ on Java 64 bit for Windows

    Click on the thumbs-up Bravo !

    It's a nice way of saying 'Thank you' for help.

    While I strive to reflect best practices of HP, I do not work for HP.

  • WiFi and bluetooh driver for hp compaq windows 7 64 bit and the model is s008TU

    Hi, I need help with my laptop I have Hp compaq 15 s008TU and I downloaded all the drivers for windows 7 64 bit but I do not find the driver for the wifi and bluetooth can you please send the link, with the help of the link I can download driver wifi and bluetooth for my windows 7 64 bit system I am not able to find in the HP site and driver principal place these drivers are not available. Thank you in advance.

    RALink 802.11 b/g/n Wireless LAN Adapter Driver
    http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64950.exe

  • Z580 windows 7 64 bit install the necessary drivers

    SM Bus controller
    PCI\VEN_8086 & DEV_1E22 & SUBSYS_397717AA & REV_04

    (USB) Universal Serial Bus controller
    PCI\VEN_8086 & DEV_1E31 & SUBSYS_397717AA & REV_04

    unknown device

    ACPI\VPC2004

    CRW - USB2.0

    USB\VID_0BDA & PID_0139 & REV_3960

    drivers needed for thank you for 64-bit windows 7

    Here's the support pages for your Z580:

    http://support.Lenovo.com/us/en/products/laptops-and-netbooks/IdeaPad-z-series-laptops/IdeaPad-Z580

    You can use the drop-down menu operating system to restrict the display of Win7x64 drivers to see what is available. Chipset driver * may * address a few items on your. Others need to dig deep.

    Kind regards.

  • Is - this Windows 2003 64-bit supports the USB WD My Passport HIS drive?

    I bought a WD 2 TB my drive USB of HIS passport and tried to connect to a windows 2003 64-bit server, but the drive does not appear in the list of local drive. I checked in the computer management > Device Manager > ComputerName > discs and found that there is a driver for device usb WD My Passport 0748.

    I conect the usb WD drive in my windows XP machine and copy the driver ITS \\Extras\WD device driver folder and transferred to local drive of the windows 2003 server and I tried to update the driver but the driver update failed and telling me that there are no compatible driver in the source folder.

    Here are the contents of the folder:

    wdcsam - security catalog

    wdcsam - information for installation

    wdcsam - file system

    wdcsam64 - file system

    I tried to search the site Web of WD for the compatible driver 64 bits, but, according to the Internet, the USB doesn't have a driver for windows because its use of the microsoft driver. Below are the links related to the topic of Microsoft and WD which, in my case, does not contribute to the problem.

    http://wdc.custhelp.com/app/answers/detail/search/1/A_ID/5419

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/my-book-WD-SES-device-USB-doesn ' t-have-a-driver/d5a255c7-545c-45f4-9e15-8528384daa80

    Is there someone out there have solution for this?

    Thank you

    Hayet

    Hello

    After finding the solution I posted it on this site.

    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/61950e4d-4C45-4108-8535-4b364f3d6056

    Thank you

    Hayet

Maybe you are looking for

  • convert word to pdf with hyperlinks doc

    have created a document in microsoft word on a mac and saved as a pdf. the links do not work when I open the pdf file. the links work in the word doc. does anyone have a solution? Thank you

  • Y570 keyboard

    I have a question about cleaning the keyboard. Is it necessary to completely remove the keyboard (up and down) to clean under the keys because these keys are irremovable. My numkey 6 works about half the time (it looks like the signal blocking someth

  • Media Gallery does not start

    It is a new problem, when I try to bring my Media Gallery, it tries to start, but no error message, it dies. I can see the photos through the file management. It works very well last week. I disassembled all the apps I had installed since then. Bill

  • Contacts ListView load time?

    Hello! Home page of the application is a list of all the contacts stored on the device.  I recover contacts using the () ContactService contacts (filters); For the some 200 + contacts it takes time to display the loading list. So I used a mechanism f

  • Client VPN routing issue

    I am trying to configure client vpn software ver 5.0 for remote to connect to the local network behind a 1801 users. I can get the client saying its connected but traffic is not circulate outside in: When I try to ping an address 192.168.2.x behind t