Download problem - links / download files that are not in the indd file

Similar Questions

• How to find computers that are not on the domain in an Active Directory forest.

  Hello

  I'm looking for a tool that can scan a subnet and give me the list of computers that are not on the field, but connected to the network. My company has recently spent a lot of users of the task force to the area, but there is a population of users who are unwilling to join the domain and still using the local administrator to log on to the computer.

  These computers do not meet the domain policies applied and causing many problems with the network and other systems on the field.

  Help, please.

  concerning

  Syed M. Uzair

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to block emails that are not in the list of contacts

  I have several e-mail everyday on sexualy explicit materia.  I put in my email account to block those who are not in the list of contacts, so they'll JUNK, but I need to check my JUNK e-mail folder frequently if there is something in there for someone that I have to answer.

  With some of the emails that I can "unsubscribe", but there must be a way to disable these ugly e-mail.

  Any suggestions?

  Margin

  I have several e-mail everyday on sexualy explicit materia.  I put in my email account to block those who are not in the list of contacts, so they'll JUNK, but I need to check my JUNK e-mail folder frequently if there is something in there for someone that I have to answer.

  With some of the emails that I can "unsubscribe", but there must be a way to disable these ugly e-mail.

  Any suggestions?

  Stopping the churn.  If they are unscrupulous - that simply confirms your e-mail address is * well * and it will be resold to new lists.

  Specifically, add them to your list of mail JUNK when you can, if you doubt, you will always receive an email, just to be sure, their entire domain.

  The only other suggestion is to get an other email address for your personal & business needs and start using it.  Make sure that you register for what whatever randomly with this specific e-mail address (control which give you out.)  A * lot * of junk mail occurs usually because someone came to something random at some point and then the address obtained on a 'list' that was happening around / sold.

• The columns appear in the data store that are not in the table

  Hi guru,.
  
  I have a table that I built in Oracle and added to ODI by refactoring it, but when I add it as a source to my interface, it contains columns that are not physically in the Oracle table that I can look into a TOAD. I dropped the prior of the table deleted-> interface-> reverse engineering table but I get an additional column. Y at - it an explanation for that? I have the table listed in a stored procedure - should I delete this step as well before reverse engineering, or is something else.
  
  Thanks in advance.
  
  Mike

  Yes. There is a possible explanation. How do you are engineering it? If you use Oracle RKM, you may be using a customized version of this KM which adds a column of your table name...

• How can I find the images that are not in the catalogue?

  I imported about 600 photos of a friend of Wakeboarding in Lightroom. I then analyzed quickly through them and remove those who were not good.

  I wanted to delete these photos in the album. However, in about 10 cases I accidentally their removed from the catalog, not from disk.

  All photos of the wakeboard are in the same folder; There are no other images in this folder.

  Is there a way to find out what images are in this folder, but are not in the Lightroom Catalog?

  Rotaluclac

  Probably the easiest way would be to reimport them in their folder (make sure that the box Import suspected duplicates is enabled).

  Those who imported will be reflected in import previous "collection." In the grid view, select all and press the delete key. Click the appropriate button on the box that appears.

  HAL

• For a given file, how to add and change file properties on the Details tab, for properties that are not in the properties list?

  Now, I am aware of the modification of the properties of the file is simple in Windows 7 Explorer. Select a file, 'Properties', then tab "Details".  Some are not editable, and that's understandable.  Click on next to any area classified as year, Genre, Publisher, etc. and the apply.  No problems so far.

  Then of course in Explorer, when you right click on a column header, you get several choices of column beyond the usual that is displayed by default; Date, the Type, size, etc.  But, there is an option "More...", which has up to now, MUCH more useful properties to choose from, such as the model project, Department, job statusand so on.

  It's fantastic!

  But when you look into the details of any given file, none of these additional properties even are listed to be edited.  Why offer to view these details, if you don't change them, or add them to different files?  I must be missing something.  I do not need to add my own custom details, this additional list has a choice, that I need; If only I could edit the files to get this info.

  How to add and change these properties to files?  Word, Excel, MP4, AVI, JPG; I would add these properties, so I can set directly in the Solution Explorer, as you would by name or Type.

  Any help would be greatly appreciated!

  My experience is that most of these 'extra fields' no existence not as fields in the directory (folder) itself.  On the contrary, these fields exist in the target file itself. Each file type has its own format and established file except for the types of files that belong to Microsoft, Microsoft cannot control or arbitrarily change the format of a particular file type.

  For example, a ".jpg" file  The format of this file type allows a large number of areas such as comments, Tags, date taken, opening, device manufacturer and so on.  If you go into the properties on a .jpg file, you will see a lot of them and will be able to change.  After changing any of these fields, you will find that the file itself has been changed to contain this information (as can be verified by the parity of the file and to come check upward with a different checksum).  If you display one of these fields in Explorer and 10000 ".jpg" files in this folder, then Explorer must open each of these 10000 files to extract the data in the corresponding fields, you have chosen to display.  May take some time.

  Compare that to the same picture saved to a file ".bmp".  The ".bmp" format has no provisions for any of these fields, so you will not be able to view, save, edit, or sort by them.  If the editable fields are directly related to the type of file that is displayed.

  Microsoft has apparently interviewed a lot of file types and made a compilation of the editable fields in each type of file and the Union of the selected fields in which can be displayed and modified.   That's apparently what you see in the option «More...» ».   So, in summary, the file type determines which fields are available for editing and posting.

  HTH,

  JW

• Firefox 4 for MAC: How can I sort the bookmarks by name that are not in the files?

  Solution in site and forum, Firefox does not work on Firefox 4 for Mac, i.e. Control View-Sidebar-bookmarks, etc.

  All the Favorites are in folders.

  • The Bookmarks Toolbar folder stores the bookmarks that you see on the (view > toolbars >) Bookmarks Toolbar.
  • The bookmarks Menu folder stores the bookmarks that you see in the menu bookmarks and create via ' bookmarks > bookmark this Page "or" bookmark this link "in the context menu.
  • The Unsorted Bookmarks folder stores which inserts created bookmarks by clicking on the star on the right end of the address bar.

  You can right click on a such main folder (root) to sort the bookmarks in that folder.

  You may need on Mac:

  • http://KB.mozillazine.org/UI.click_hold_context_menus
  • http://KB.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
  • SortPlaces: https://addons.mozilla.org/firefox/addon/sortplaces/

• How to remove photos that are NOT on the photo stream

  I downloaded pictures from my camera to the computer, then on my iPhone.

  I cannot delete them now.

  The only way is to delete them from my computer I DON'T want to do.  I want to just delete from my iPhone because they take up far too much space.

  Help please.

  Hello Dolek,

  Welcome to Apple Support communities.

  It sounds, you want to know how to remove the pictures that have been synchronized to your iPhone, but you want to make sure that these photos are not deleted from your PC. Try to take a glance at the article below, the link that describes the process of synchronization of photos to a folder on your PC to your iPhone, and remove photos from the selected folder or choose a different folder that you want to synchronize the photos since.

  Sync photos from your computer to your device via iTunes - Apple Support iOS

  So long.

• I have two problems: 1) a theme that does not change the look of my Firefox at all 2) there is no button 'disable' for my themes only 'delete '. Help, please!

  Okay, so my problems are...
  (1) I downloaded a theme for the first time and when I did, it worked perfectly fine. After updating, I download the theme again and it helped, but the theme will not change the look of my browser. When I tried one of the relevant articles, I cleared my cookies and cache and downloaded the theme (A Blue Fox), installed and turned on, and it worked perfectly fine! I tried to upload another (Pink Fox), one installed and activated, but it did not work. Instead, he returned to the default theme. So I tried to clear my cache and cookies again and repeat the process, but now after downloading, it says "error".... "I don't know if it says"Error Downloading"or"installation error ". Now, I tried to download it again after turning off my computer and turn it back on again, but (today), the two has not applied to my browser. They both had the same look... by default! Please tell me what is the problem!
  (2) in my "Add-ons Manager" page, on the appearance tab, there is no button disable for my modules. Only the "delete" button is present.

  Please help me!

  NOTE: I already tried to reset Firefox, but it does not solve my problem.

  You do not disable a theme, but you choose another theme if you want to change the theme.
  
  Remove button is for when you no longer want this theme.

  You must select a theme and then close and restart Firefox, if you want to use this theme.

  If this does not work, then you may have a problem with the prefs or something interferes.

  If you don't keep changes after a reboot then see:

  • http://KB.mozillazine.org/Preferences_not_saved

• When I open the site in Contribute CS5, it moves items to the bottom of the page that are not in the regions of editiable

  Site was created in DW CS5 and so it is edited in DW it's fine. The minute you click on edit in Contribute CS5 text, links, and div tags is pushed to the bottom of the page. This is before I touch event whatever it is in an editable and the elements that are affected are not in an editable? If I go ahead and make changes in the region of editiable and save, he recorded with all of these elements encountered towards the bottom of the page. I convinced a client that Contribute was the way forward, they bought 3 licenses and now can't change their site.

  Any ideas?

  This problem is the adjustment of spacing of the paragraphs in the role of setting.

  (1) administer site in Contribute.

  (2) select the role, then click on change settings for role...

  (3) in the dialog box change the parameters of role (mentioned below), choose "two lines, as in (uses standard web page editors '.

  Tags)' option under the spacing of the paragraphs in the editing category.

  (4) to save the settings and try to place again the page in edit mode.

  

  Hope this has solved your problem.

• The images appear when printing that are not on the screen

  Sorry if this has already been covered - I can't find an answer with any of my research...

  I use Indesign CS3 in a Vista environment.

  I created a document in CS3 that contains images tiff, jpeg and pdf placed in it.

  Everything looks fine on the screen, but when I print a test in black and white on my HP laserjet pages contain an image where a 'ghost' of the image above it on the page is printed on it.

  "Ghost" images are always compensated by about 1/3 - 1 / 2 of the picture, they are printing on and disappear if I move the image of the 'ghost' comes off on the side.

  The "ghost" does not appear on pages where there is one picture above the other, does not seem to be limited to some combination of file types.

  It is not on the page outside a rectangle areas encompassing.

  I've tried mucking around with some print settings, but my knowledge is a bit limited in this area.

  This happens if I print all right out of InDesign or if I export the document as a pdf and print from that.

  I've never had this problem before using previous incarnations of this software and you want to go coloring print until I know if this might just be an artifact of the test B + W printing process, or if it's something else.

  Thanks for your help.

  Mingstru.

  First the good news. It's not your software, everything works fine.

  Now, the bad news; It's the printer... the easiest way to make sure is to print it on a different printer.  The fact that you barely notice it's probably because your pinter gets older, or need some replacement of consumables.

  As to how to solve this problem there are not that many, you can do it, you might try to print either way up, according to your location of the image, it would be not so sensitive.

• How to track the URLS that are not in the 'history', but were actually visited by the browser?

  I open a page web mith several links that appear the same:
  www.someurl.com/somepage.SD#
  When I click on links, the section of the web page is expanded and more information is displayed. the web page contains JavaScript. So, I want to follow the real URL that the browser visits.

  These data are retrieved via a XMLHttpRequest to rebuild the part of the page and the URL in the location bar remains the same.

  • http://www.Soccerbase.com/matches/additional_information.SD?id_game=664223

  You can see in the Web Console (Web Developer > Web Console;) CTRL + SHIFT + K) as a POST and GET action.

  You won't see a history entry in this case because you are not actually visit this web page.
  
  These data are simply used by JavaScript to update the content of the current page.

• Separate the values that are not in the hierarchy...

  Hi all
  
  Please help me build the following query:
  
  Parent child
  ==== ===
  10 20
  20 30
  30 40
  50 60
  70 80
  
  etc... In the above data we ensure there's a great single parent say 10 and values 50,60,70,80 etc are not attached to the grandparent 10. so I need to display values that are forgotten to fix on the Top 10 of node that is to say, here 50,60,70,80 etc. If my query is useful in retreving these values then I can attach them to the hierarchy.
  
  Thanks in advance.
  
  Kind regards
  Kalyan

  SQL>WITH t AS
    2       (SELECT 10 AS par, 20 AS chi FROM DUAL UNION ALL
    3        SELECT 20, 30 FROM DUAL UNION ALL
    4        SELECT 30, 40 FROM DUAL UNION ALL
    5        SELECT 50, 60 FROM DUAL UNION ALL
    6        SELECT 70, 80 FROM DUAL)
    7  SELECT *
    8    FROM t
    9   WHERE chi NOT IN(SELECT     chi
   10                          FROM t
   11                    CONNECT BY PRIOR chi = par
   12                    START WITH par = 10);
  
         PAR        CHI
  ---------- ----------
          50         60
          70         80
  

  HTH, Urs

• How to stop objects that are not on the scene that appears in a browser?

  I have text scrolling in my ActionScript 3.0 code and implies the full text of scrolling in from outside the area of the visible scene on the stage, then he again.
  
  However, when I view it in a web browser all that is outside of the scene is also displayed? How to stop browser view objects outside the scene and only show items when they're onstage?
  
  Thank you very much.
  
  Rhys

  If you want just a balance left - right, then just wrap the Flash content in a

  tag and then set it to center alignment.

• Visitors are able to download versions that are not issued for their device

  Version 1.1 and 1.0 of my application were sold two groups of devices at the launch of my application on App World. A few weeks later (two days ago), I submitted version 1.2 which is set up to offer to all devices in the two groups, and it has been approved for sale. I'm not all users is v1.1 or v1.0, so I put this version to deliver to users of OS 5.0 + and the 8700 so he would be delivered to actually no. Now, almost all clients for this application are download v1.2, which is what I want, but I see that v1.1 is still currently being delivered to some customers. I see two users, one with a 9800 and an a 9780 v1.1 download, but most of the people with these devices become v1.2 as they should be. I'm puzzled.

  Any ideas why this happens? How can I prevent v1.1 and v1.0 being sent to anyone?

  Thank you

  Scott

  This is the famous cache App World, I guess. Based on my own experience, you will see the download of previous versions for a week or two. It doesn't matter that you have essentially disabled the old versions.