error code740 when you launch a game for the first time uploaded

Similar Questions

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• Windows7 64 bit. Why the desktop icons all be empty when you run Firefox nightly for the first time?

  Every time after I get a Firefox Nightly update and run it, it will display the next page:
  https://www.mozilla.org/en-US/firefox/nightly/firstrun/?oldversion=30.0 which is fine.
  But when it opens this page, all my desktop icons go clear/white and one by one, they all return with their correct icons. And all this happens in a few seconds.
  Why is the operation of Firefox every night for the first time, my desktop icons?

  I suspect that you have both nightly and Firefox version installed?

  "The Firefox 'about' shows 30.0. and I've now checked for updates and are now running 33.1.1"
  

  It's different from what you have first published here with!
  Firefox 33.1.1 represents the latest version - a 32-bit version.

  Whereas, the version you first posted here with was a generation of 64-bit channel every night from July. Every night is for "Alpha-testers" and is updated every day, where the name of "night".

  Everything that happens in the background on the Windows desktop should not be of concern right now, every night Win 64 bit is several months out.
  If you really want to test the Win 64 Nightly builds, follow and participate in the very different evenings and son of 'channels' on MozillaZine forum is based.

• Hi all. When l lance a game Sudden Strike 3 I get error "insufficient privileges: u must be administrator when you run this application for the first time". What should I do?

  I have already checked that his play on preivileges admin % but still run it.

  Make a right click on the shortcut, go to properties, then find target. Right-click on the application and in the menu that appears, select run as administrator.

  The message that you shouldn't have to do is run once in this mode.

• Insufficient privileges: you must be an administrator when you run this application for the first time.

  I have an alienware laptop with windows 7. All my other games work fine, the game installs just fine but when I try to play X 3 Terran conflict, I get this error message. Mine is the only user on the computer account and I am the administrator. Someone please help, this is my favorite game of all time!

  Hi jamesgrey,

  See the link on the site of the game seller where it says that you need to install a fix for this error message below.

  http://www.Egosoft.com/support/FAQ/faq_answer_en.php?answer=1676&version=9&SID=688d193cacfacd06f51d0679e9b0bcca

  For additional support post your query in the forums of game seller.

  http://www.Egosoft.com/support/FAQ/faq_answer_en.php?answer=1676&version=9&SID=688d193cacfacd06f51d0679e9b0bcca

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?

  get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions?  Using Windows XP.

  Hi James,

  • Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
  • Restart your computer.
  • Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.

  Let me know if the problem persists.

  Kind regards

  Nicos

• The system failure when Adobe Dreamweaver CS6 running for the first time... Why?

  When I downloaded the adobe dreamweaver cs6 and during installation... There is nothing wrong except the screen resolution (required = 1280 * 800, but available = 1330 * 768)

  But when I tried to run the program for the first time, the system had failed.

  Can you help me to know the true cause, please?

  Note: I'm using Windows XP sp1

  CS6 requires a minimum of Windows XP with Service Pack 3. Also, your vertical resolution does not meet the minimum requirements.

• When I installed for the first time the creative cloud I did not fit into the second computer and now I don't know how to do this. Can someone help me?

  When I installed creative cloud for the first time I was not installed in the second computer and now I don't know how to do this. Can someone help me?

  Hello

  Please refer to the help documents below to download the application Adobe CC:

  Creative cloud to desktop

  Download, install, update or uninstall applications

  Kind regards

  Sheena

  Moving to the cloud creative download & install

• I use a USB device for the first time. My computer windows Xp does not recognize. How can I fix this prob, and where can I get the info to fix it?

  When I insert my USB for the first time, it is said that it has malfunctioned, and windows does not recognize it. Am I missing driver for USB or what? I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  I need step by step instructions on how to fix this prob. I'm an amateur. Thank you.

  Step 1.  Identify the make and model of the USB device.
  Step 2: Identify the version of Windows XP you have, including service pack (start > run > winver > OK)

  Although the following steps 1 & 2 you could get extra help, I suspect that the 'USB device' has indeed "defective" and you have to go back to where you got it and request a refund or a replacement.

• Error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer.

  Original title: trying to download

  WinXP SP3, Security Scan run and d/ld: error message when you try to download Windows Defender: "first remove Microsoft Client Protection." Cannot find this file through the Add/Remove, search, including hidden or Win Explorer. What to do now would be much appreciated.

  Also have a related problem about MS Maliciouws software removal tool. For download, but read in the KB that: in XP, the vacuum cleaner will remove the malware, but doing so may trigger the File Protection Win with damages to my operating system.  the tool will attempt to repair the damage, but to rehabilitate prior to infection, that I need to insert the CD of Win. As my computer came with Windows preinstalled, I do not have a disk and will not take the risk of damage, that I can't fix. Do I not download or not... ? Another solution... ?  I also fear that this tool could settle into the routine Win Update and need guidance on the prevention of this facility, if possible, or what to do if it cannot be prevented.

  It can have nothing to do with any of the foregoing. " I'm relaying only because it occurred during the same mission of update: had msg of error that Win Firewall has not been set as a default, which reset, but found this hidden file when searching for the Protection of the customer: "Win 32/Hackdef' - it was a config with the extension ini file and was deleted by Scan."

  Thanks a lot for any assistance.

  scate 39

  Hello

  ·         You have Microsoft Security Essentials on your computer?

  If you have windows installed on your computer security essentials, then you will not be able to install Windows defender. Windows Security Essentials has antispyware component installed.

  You get the error because you have installed MS Security Essentials, which has its own function to antimalware. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  See also:

  You can turn on or turn on the firewall in Windows XP, please see the link below:

  http://support.Microsoft.com/kb/283673

• When you get a retailer to re - install Vista are you able to burn a copy of Vista as when he was the first new and turned on for the first time?

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hello and Merry Christmas to all. Sorry its been a while that I had time to be on the forum, (family illness) Anywho my daughter had dropped her Lenovo and although we went through every conceiveable options to retrieve and detaches from the dreaded "black screen" we couldn't. We had the chance to recover his files before he died forever! That was the good part... I had to resume at Tiger Direct, where they installed a new concert 320 H/D and re-installed Vista. Because she graduated she had two of the residence and turned my basement into a hoarders paradise, lol point being that she has no idea where his original disk is so I contacted Lenovo who assured me that they would send me a copy of Vista (how naïve of me) they me sent recovery disc (two games not less and it took more than a month!) that I discovered after the fact that I could have burned my own through Neo-Smart...

  There is one thing that still bothers me and that's when we first pulled his new Lap Top for the first time and installed Vista I remembered that the very last paragraph said to make your own copy of the o/s before your done... what was not done! Is it still possible to make a copy of its operating system now? If Yes, how would go about this, if I wait for her to do it, it will not! She was lucky that I was able to use a slave to its hard disk of my XP Sata-IDE cable and get its files on the drive before it me locked. It has an external H/D as most of the people who do not know how to change their scores on the top of their Tower and get the full use out of them as desk top users do.

  As aways thanks for the fellow forumer for your time and trouble and any help is appreciated.

  Tiggerer

  Hey tiggerer

  NeoSmart is software startup repair not a recovery disk to reinstall vista

  and once you have replaced your hard disk you have lost the ability to do the recovery disk from the recovery partition that may have been defective hard disk

  and it depends on your version of vista as to whether you can now make a backup complete pc using microsoft software

  you need vista business or vista ultimate to backup full pc

  read information from microsoft about it at the link below microsoft

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  If you have not these versions vista expect from lenovo recovery disks be delivered or buy a third party program to do a full backup pc

  one of these programs is the true picture in the link below

  http://www.Acronis.com/

  have a happy holiday season

  Walter, the time zone traveller

• Always incompatible error when using the app for the first time

  We get the following error every once in a while when you realize an IISReset and newspaper, GSM or SCRM or NDP (have not tested the other apps) for the first time.  The only recovery of this seems to be to make an another IISReset and try again keep doing so until the stop occurring.  Does anyone else have this problem?

  Exceptions: System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ApplicationException: could analyze not String Boolean value: "${UserInRole:CP_SYSTEM_ADMIN} '-> System.FormatException: string was not recognized as a valid Boolean value.

  at System.Boolean.Parse (String value)

  at Xeno.Web.UI.NavigationControls.Builder.Helper.AttributeSetter.ParseBooleanValue (String attributeValue)

  -End of the exception stack trace internal-

  at Xeno.Web.UI.NavigationControls.Builder.Helper.AttributeSetter.ParseBooleanValue (String attributeValue)

  at Xeno.Web.UI.NavigationControls.Builder.Helper.AttributeSetter.SetAttributeValue (String attributeName, attributeValue, menuObj, Boolean isIgnore Object String)

  Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.BuildMenuItem (model IMenuModel, BaseMenu menuToBuild)

  Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.BuildMenuItem (model IMenuModel, BaseMenu menuToBuild)

  Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.BuildMenuItem (model IMenuModel, BaseMenu menuToBuild)

  Xeno.Web.UI.NavigationControls.Builder.YApplicationMenuBuilder.Build (model IMenuModel)

  to Xeno.Web.UI.NavigationControls.NavigationControlContainer.OnInit (ByVal e As EventArgs)

  Oracle support should be able to provide a help file, AssembliesPage.aspx, that you can place in your WebCommon directory. When you then navigate to this page in the URL, it will try to load all the dll dependent and relevant. If one of the required DLL is not found, it should give you a message at the bottom of the page showing you what dll (if any) was absent. It is the most common cause associated with this type of error reported. If you add the missing dll, dealing with the issue.

  You can access the support page by typing the address bar something like the following:
  https:// /gsm/WebCommon/AssembliesPage.aspx
  This assumes that you have placed the page in the directory web\WebCommon

  - - - -
  Kind regards

  Ron

• Microsoft Lync 2010: When you add users to the Conference for the first time without having to type anything, the chat window is grayed out.

  Hello

  Microsoft Lync 2010: When you add / invite users to the Conference for the first time without having to type in the chat window, the chat window is grayed out. I am not able to type anything in the chat window to continue the Conference.

  Thank you
  Rajeev G C

  Phone: 9886540640

  Hello Rajiv Iyer,

  There is a forum for questions about Microsoft Lync 2010.
  Click here for a link to repost your questions in forums Microsoft Lync.

  Thank you

  Marilyn

• When I connected to adobe photoshop for the first time with my adobe ID and password on my lap top, it couldn't connect and gave me "error 400".  What does that mean?

  When I connected to adobe photoshop for the first time with my adobe ID and password on my lap top, it couldn't connect and gave me "error 400".  What does that mean?

  Hello

  Please visit Adobe Creative Cloud connection errors

  Hope that helps!

  Kind regards

  Sheena

• For the first time using BMP - app ever built, plugin file error constant

  Hello - I am trying to build for the first time and many plugins are errors. I am commenting them one at a time from the XML config and one of the culprits is the plugin file that I need to use. The other is the network plugin which also gives errors. The State errors that are not compatible with CLI 6.3.0

  I know it's the plugin developer to make compatible - y at - it something somewhere that indicates which versions of the plugins are compatible with versions of BMP? How can I find out what previous version of BMP is compatible with anything?

  Also, and this might be relevant to the question - when I look at the BMP to see what are the versions that I build for, I see that apparently I'm targeting iOS4.2?

  http://www.rickluna.com/pgb_err.PNG

  In my XML I'm deploying to iOS 9 but does not change the value of GBP v 4.2

  < preference name = "deployment target" value = "9.0" / >

  DRM for suggestions!

  r

  These plugins are all using the deprecated point rating. You must use:

  etc.

  Can I ask where you got to go to? I want to assure you that the resource is updated to the correct format.