Download the BLOB form

Similar Questions

• Error when you try to download the application forms, not a valid Windows 32

  not a win32 application invalid and stop the download

  When I try to download tax forms IRS my computer says "application not valid windows 32 and stops downloading just 15 seconds before its filled! What the heck is wrong?

  Hello shelleyjane,

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below, and possible solutions.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.
  -You can download the app again and see if you still get the error message.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if that helps.

  Marilyn

• You can download the old form Digital River reports?

  Is anyone can download older reports form Digital River?

  For the moment, I see only the last two reports:

  September 2010 RIM prod-2511 AllSites_AllLocales
  August 2010 RIM prod-2511 AllSites_AllLocales

  and we need the older reports to conduct a detailed analysis of purchases reported vs real estate purchase in our backend (through HTTP messages in real time)

  Update - I sent an email to accountspayable [at] m6mobile.fr and in 2 or 3 days they have restored the missing reports.

  Closed question

• I can't download the Visual form photo my camera to my pc

  I need help. The image is available for download but not the video images.  Why?

  I need help. The image is available for download but not the video images.  Why?

  ======================================
  Something to try...

  Connect your camera to the computer via a USB cable or insert
  your memory in your card reader and close all
  Windows that can be opened... then try the following steps.

  If you connect the device to your PC via a USB cable, turn
  on the camera... then go to... Start / computer... it can be
  listed as a drive letter...

  If_yes_right click on the drive letter and select... Explorer or
  Open... This should display the directory of the memory card.
  You can copy and paste or drag and drop the files from there to a
  folder on your hard drive.

  The same steps will work if you have a media player...
  When you go to... Start / computer... the card reader must
  be recognized as one or more hard drives.

  Removable (e :)) drive
  Removable disk (e :))
  Removable drive (g)

  If_Yes_you can download the files from here. Left click
  the drive letter that corresponds to the location of your memory
  a card should display the directory of the card and you
  can copy and paste or drag and drop the files of your choice for a
  folder on your hard drive.

  Just right click a file or group selected (hioghlighted)
  file and choose... Copy... then navigate to the folder that you
  want to save them in and right-click on the folder and choose Paste.

• Download the Blob file

  I use ADF BC, Jdeveloper11g 1.1.1.4
  
  in my application, I need the list down all the files stored in the Blob from a database table field in the af: table, if the user clicks on the name of the file that is linked to af:link, then the file will be opened to show the user the contents of the file.
  
  There is a sample built in 10g of http://technology.amis.nl/blog/category/oracle/adf-jheadstart, but only limited to types of files as 'doc', 'pdf', 'excel '.
  
  I think there is a solution put forward 11 g and also not be limited only these three types of file upload & dwonload to & database right of files?
  
  Could you expert give me only a sample built in 11g to let me study, thank you very much!

  http://KR.forums.Oracle.com/forums/thread.jspa?threadID=1982213 - looks like, you may need to change the contentType depending on the use case

• Manually download the blob file in apex

  Hello

  
  Currently, I load csv files in a table via an apex user interface. The table that contains the data is constructed as follows:

  TBL_UPLOADS

  (

  ID NOT NULL

  BLOB_CONTENT BLOB

  MIME_TYPE VARCHAR2 (255)

  NAME VARCHAR2 (255)

  LAST_UPDATED DATE

  CHARACTER_SET VARCHAR2 (128)

  )

  I have an automatic line (DML) process that defines the operations allowed on the table. In my case, it's only "insert." I also mentioned here a condition that the process runs only when you press the UPLOAD button. I also filled all the attributes of source as Element containing primary key column value (required) etc.

  I also have a DOWNLOAD button. In the section Action when the button clicked on this button the following applies:

  Action: SEND the PAGE

  Run validations: YES
  Action of the databases: ACTION of INSERT SQL

  It all works just fine. I just want the action to the database manually because I want to do more things then just insert. First thing I need to do is to replicate. It is where I am confused. Now I know I need to use a dynamic action for this. I don't know how to insert values into my tbl_uploads (the query insert himself). I looked at examples such as Denes Kubicek - ApEx Solutions , but I do not use the wwv_flow_files table. On the other hand, looks like a history of chickens and eggs for me because I need to insert data in my table (uploads) first.

  
  Can someone put back me on track?

  You can have multiple processes that have the same State (same IE "when button pressed")

  Thus, when BUTTON_X is pressed, all the processes that meet the condition will run accordingly.

  On this particular page, the first process is the Excel2Collection plugin.  This loads the data in a Collection of the APEX.

  The next process uses a PL/SQL code that transforms and loads data in the actual table.

  The two processes have the Condition "when button pressed" defined on the same button. (P19_UPLOAD)

  MK

  (I don't like the view of 'the tree')

  

  Details of the process ' file in the Collection ': ('Collection of process' process is identical)

  

• Download the Blob in ADF

  Hello

  I want to downlod file Blob of the Oracle database in the adf, can someone help me with this task.

  Thanx.

  See online, download and store the data into a blob

  JDev11.1.2.1.0: Manipulation of images/files ADF (part 2) | JDev & amp; Goodies from the ADF

• Download the oracle forms

  is it ok to download forms from the oracle site if it's for the home/self-training with the books?

  Read the OTN Developer license
  http://www.Oracle.com/technetwork/licenses/standard-license-152015.html

  see you soon

• Download the BLOB table

  Hello
  
  How can I download BLOB table. On my page, I use a table with a row displaying the name of the file and I put the af:commandlink type. It is possible with af:fileDownloadListener?

  Hello

  In your table, add a new column

  You supporting bean (myBean) add this method and replace my your values (name, attribute name iterator)

    public void downloadFileAction(FacesContext ctx, OutputStream out) {
  
        ExternalContext ectx = ctx.getExternalContext();
        Row currentRow = ADFUtils.findIterator("MyIterator").getCurrentRow();
        String fileName = (String)currentRow.getAttribute("FileName");
        BlobDomain content =  (BlobDomain)currentRow.getAttribute("FileContent");
        Long length = content.getLength();
  
        HttpServletResponse response = (HttpServletResponse)ectx.getResponse();
        response.setHeader("Content-Disposition", "attachment;filename=\"" + fileName + "\"");
        response.setContentLength(length.intValue());
        try {
            InputStream in = content.getBinaryStream();
            byte[] buf = new byte[1024];
            int count;
            while ((count = in.read(buf)) >= 0) {
                out.write(buf, 0, count);
            }
            in.close();
            out.flush();
            out.close();
            ctx.responseComplete();
         } catch (IOException ex) {
            ex.printStackTrace();
        }
  
    }
  

  Concerning

  Nicolas

• Download the 6 forms

  Hello together,
  
  I would like to download forms 6 on the Oracle website, but I can't. Is the old version, or where I can find it?
  
  Kind regards
  Kai

  Hello

  Download Developer 6i for Linux or Windows:

  6i dev for Linux:
  http://download.Oracle.com/OTN/Linux/forms/d2k6irelease2.tar

  6i dev for Windows:
  http://download.Oracle.com/OTN/NT/forms/6i_rel2_xp.zip

  concerning

• Where can I download the Oracle Forms 3.0 installation cd?

  Hi everyone out there,
  Pls can anyone help me give me a link where I can download installers forms 3.0? It's because I need to set this up on my servers from starting applications character mode.
  
  Thanks in advance.
  Erik

  Forms 4.5 oracle Installer is on my hard drive.

• Download the content of the BLOB from a custom table

  In our application hosted the apex, the following code from the Express on the Application Developer's Guide works great to allow a user to download the contents of the blob of one of our paintings customized via a download button. However, the code does not work on the Cloud Oracle because the 'owa_util' package is no longer available. The code is as follows:
  
  CREATE OR REPLACE PROCEDURE download_my_file (p_file in number) AS
  v_mime VARCHAR2 (48);
  V_LENGTH NUMBER;
  v_file_name VARCHAR2 (2000);
  Lob_loc BLOB;
  BEGIN
  Name of SELECT MIME_TYPE, BLOB_CONTENT, DBMS_LOB. GETLENGTH (blob_content)
  IN lob_loc, v_file_name, v_mime, v_length
  OF file_subjects
  WHERE id = p_file;
  --
  -set up the HTTP header
  --
  -Use a NVL around the mime type and
  -If it is null it the value application/octect
  -application/octect can initiate a download of windows window
  owa_util.mime_header (nvl(v_mime,'application/octet'), FALSE);
  
  -set the size so that the browser knows how to download
  HTP.p ("Content-length: ' |") v_length);
  -the name of the file will be used by the browser if users only one save as
  HTP.p ('Content-Disposition: attachment; filename = "" | ") Replace (Replace (substr (v_file_name, InStr(v_file_name,'/') + 1), Chr (10), null), Chr (13), null). '"');
  -close the headers
  owa_util.http_header_close;
  -Download the BLOB
  wpg_docload.download_file (Lob_loc);
  end download_my_file;
  /
  
  In addition to the use of web services, does anyone know how to do this? Is it possible to add access to the package 'owa_util' in the cloud? I also tried apex_util.get_blob_file_src but that is also not available in the Oracle cloud.
  
  Thank you
  
  Steve

  Hi Steve,.

  (1) sys.owa_util is certainly available. You should be able to issue this block very well SQL commands:

  Start
  owa_util.print_cgi_env;
  end;

  ((2) I think the problem is that you have created a procedure that a) cannot not be granted run to the PUBLIC and b) cannot be called directly from the URL (because of a properly locked APEX listener which restricts entry points, i.e..) What procedures can be called directly from the URL).

  Even if there was no prohibition of granting something to the PUBLIC, you would never get by the restriction on the call of your own point of entry of the URL. Also in a facility non - Cloud APEX (and even when you're using mod_plsql), the list of entry points is applied through the PlsqlRequestValidationFunction (http://docs.oracle.com/cd/E23943_01/web.1111/e10144/under_mods.htm#HSADM698).

  Two ways around this:

  (1) you can define a request of the process which, when called, downloads the requested file

  or

  (2) you may want to expose this functionality via a RESTful Service of media resources, even though right now, I'm not necessarily details how you would ensure access to it.

  I hope this helps.

  Joel

• Difficulties to download the .pdf file using Adobe 10 app "no connection not detected".

  Have enabled internet connection when you are connected to the web page and domain name when I try to download the .pdf forms, open app Adobe10 but file download transfer stalls saying unable to detect the internet connection? I am already connected, I don't understand

  file transfer download stalls saying unable to detect the internet connection? I am already connected, I don't understand

  A firewall can cause that.   For example the program tries to link may need to be allowed to pass through.

  ---

• Download the procedure not found on the server.

  Hello
  
  I created a feature to download files using the Oracle (http://download.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/up_dn_files.htm#CIHBFCDH) tutorial. The files are copied from the flow table in a custom table named SR_ATTACHMENTS with the following structure:
  
  Default primary key Type Nullable data column name
  IMAGE_ID NUMBER - 1
  NAME VARCHAR2 (60) Yes.
  Filename VARCHAR2 (60) Yes.
  Mime_type VARCHAR2 (60) Yes.
  DOC_SIZE NUMBER Yes-
  CREATED_BY VARCHAR2 (255) Yes.
  DATE of CREATED_ON Yes-
  Content_type VARCHAR2 (60) Yes.
  BLOB BLOB_CONTENT Yes-
  REQ_ID NUMBER Yes-
  
  
  There is a file record in the SR_ATTACHMENTS table:
  
  SELECT MIME_TYPE, BLOB_CONTENT, filename, DBMS_LOB. GETLENGTH (blob_content)
  OF SR_ATTACHMENTS
  WHERE IMAGE_ID = '41090122232687300';
  
  Results:
  'MIME_TYPE', 'BLOB_CONTENT', 'FILENAME', 'DBMS_LOB. GETLENGTH (BLOB_CONTENT).
  ' application/pdf', "[no support for data type]", "relish_menu.pdf", "90353"
  
  
  Here is the link which is built in the apex in the column links:
  
  #OWNER # .file_download? p_index = #IMAGE_ID #.
  
  
  Here is the link as it appears on the page when the cursor is placed:
  
  http://My_server:7777/pls/Apex/PRSVCREQDEV.file_download?p_index=41090122232687300
  
  
  
  When the user clicks on the link, I get the following error:
  Not found
  The requested URL /pls/apex/PRSVCREQDEV.file_download was not found on this server.
  
  
  
  Here is the procedure:
  
  CREATE OR REPLACE PROCEDURE file_download (p_file in number) AS
  v_mime VARCHAR2 (48);
  V_LENGTH NUMBER;
  v_file_name VARCHAR2 (2000);
  Lob_loc BLOB;
  BEGIN
  SELECT MIME_TYPE, BLOB_CONTENT, filename, DBMS_LOB. GETLENGTH (blob_content)
  IN lob_loc, v_file_name, v_mime, v_length
  OF SR_ATTACHMENTS
  WHERE IMAGE_ID = p_file;
  --
  -set up the HTTP header
  --
  -Use a NVL around the mime type and
  -If it is null it the value application/octect
  -application/octect can initiate a download of windows window
  owa_util.mime_header (nvl(v_mime,'application/octet'), FALSE);
  
  -set the size so that the browser knows how to download
  HTP.p ("Content-length: ' |") v_length);
  -the name of the file will be used by the browser if users only one save as
  HTP.p ('Content-Disposition: attachment; filename = "" | ") Replace (Replace (substr (v_file_name, InStr(v_file_name,'/') + 1), Chr (10), null), Chr (13), null). '"');
  -close the headers
  owa_util.http_header_close;
  -Download the BLOB
  wpg_docload.download_file (Lob_loc);
  end file_download;
  /
  
  
  Grants are:
  
  Name of the constituent object of the privilege dealer
  NO PUBLIC PERFORMANCE NO PRSVCREQDEV FILE_DOWNLOAD
  
  
  Any help is greatly appreciated!
  
  Thank you
  Matt

  Hello

  No problem, by the way, don't forget you can assign points to get useful answers here ;)

  John
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd

• HP PAVILION NOTEBOOK PC G7: How can I download the driver hp Pavilion notebook form g7 graphics radeon on processor intel

  someone can tell me, how can I download the driver hp Pavilion notebook form g7 graphics radeon on processor intel

  Hello

  What is your Pavilion G7? Please follow the instructions below to find the product/model of your machine:

  http://support.HP.com/us-en/document/c00033108

  Kind regards.