T610: Light customer T610 remains stuck in the PXE boot

Similar Questions

• Satellite A25-S207: how to force the PXE boot?

  Hello

  I have a Satellite A25-S207 and a big problem!

  I want to start my laptop using PXE to install Suse Linux. I already did 3 months ago. It worked perfectly, but at that time, I did start command configuration using the utility on Windows. I had to install Linux PXE, because my CD drive does not work.

  Now, to complete my tragic situation, my HD failure! As long as my CD-ROM does not work, the only way I can at least try to bring my data partition is trying to reformat the system partition, install Suse and copy the data in my office. At least until I can buy another CD-ROM unit.

  But how do I set the BIOS to boot from PXE without the utility of Windows? I know that by pressing the C key while booting, the CD-ROM startup is enabled, but does anyone know a similar option to choose the PXE boot?

  I appreciate really have no idea!

  Thank you!!

  Best regards!

  Now I have I already did once, since my CD-ROM combo is 'dead '.

  If you press N immediately after laptop starting so the unit should be able to boot from the local network.
  Also in the Toshiba HWSetup under tab BootPriority PXE network boot protocol must be selected.

• Mail remains stuck in the apex_mail_queue table

  Hello
  
  I am trying to send the email using the apex_mail.send package.
  
  The email is sent to the person that I intend to send, but some time... Mind you not all the time, there are folders that gets stuck in the apex_mail_queue, and it sends the same e-mail 3-4 times.
  
  I don't understand why this is happening! Please help me with your suggestions...
  
  Thank you
  Njeh

  You have the html message attached as such or have you tried sending mail as mail html only text? : http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/apex_mail.htm

  Thank you

  Tony Miller
  Webster, TX

  Never argue with a fool. They do you drag down to their level, then beat you with experience.

  If you answer this question, please mark the thread as closed and give points where won...

• Reference Dell place 11 Pro - problems with the PXE boot

  Before buying a large number of these tablets (11 Pro 7130 venue), I have to ensure that they can be deployed from MS Configmgr (2012). So far, I have no chance for our test model to perform a PXE boot.

  Following the instructions documented by Dell here:

  

  I have a USB dongle to Ethernet Lenovo based on the AX88772B chipset... that is supported according to the documentation. However, try to perform a PXE boot, the screen hangs on the message:

  -----------

  check for the presence of media...

  on ipv4 pxe boot

  -----------

  After awhile, it starts up and then hard disk. BIOS version is A14.

  Any help would be appreciated!

  We have solved this problem by following these:

  

  

  .. DHCP basically has to manage a little different UEFI devices.

• HP Officejet 7610: Print the task remains stuck in the queue

  I want to install a 7610 Deskjet to print via WiFi on my home network to a windows PC 10.

  It prints pages test locally, and the computer (preferences Print - print a Test Page).

  It still prints the first document, but that the document never leaves the print queue. His status will be 'print' and sometimes size will show that all the file has been sent (e.g. 123/123 MB and sometimes it will show almost all has been sent (for example 120 MB / 123 MB).)

  The doctor Print (v4.9) downloaded and installed: HPSupportSolutionsFramework - 12.5.26.37.exe. The print doctor always reports "Print queue problem solved" and remove the blocked entrance. I can clear the error by deleting files to print that and restart the print spooler service. However it only lets me exactly a document more having to restart the print spooler.

  Tried to use an other PC Win10, same symptoms

  Printing a small text file or print a Page of Test works, but any file to print several pages fails. A tried. PDF. Docx, Web page of the Chrome or edge and all fail.

  Help?

  -Jeff

  Did you check the firmware of the printer? (Link to firmware HP)

• Muse/BusinessCatalyst: Opera mini / mobile Opera remains stuck in the desktop view

  After visiting a site of muse and switch to the view of the office, Opera Mini continues to serve it even coming back from the original URL:

  1. create a site.com site with a view of mobile and office.

  2 give the link to get a mobile phone on the desk.

  3. open the site with opera mini.  Charge of the mobile view.

  4. click on the link to access the desktop view.  Muse redirects to something like site.com/phone/index.html?devicelock=phone

  5. put in the URL for the original site, for example. site.com.

  6. now, when you go to the site.com, the URL resolves the site Office.  Incorrectly.

  7. try to clear the history and cache in the mini opera-> same result.

  8 go to the explicit link to phone site.  Then return to the base URL site.com.  Always incorrectly resolves site Office.

  It seems that Muse does not support opera mini / mobile adapted, please advise.

  As a site visitor when you click on a link "Go to the site office" you are indicating any subsequent navigation of the site will be the site Office, until you link "go to the site of phone.

  To return to the phone layout, put a link on your desktop site that goes to a page of phone, and then click this link in your mobile browser.

  Or, Alternatively, to clear cookies (not the cover) on your mobile device to cancel the lock of the device which is defined when a link "go to the site Office" is followed.

• Auto deploy hangs to the pxe boot

  Has anyone seen this error before?  AutoDeploy hangs during the boot process.  It loads iPXE, retrieves the URL https://my.autodeploy.server:6501 / vmw/rbd/tramp.  It crashes and eventuall fails when trying to post to/vmw/rbd/host-register? bootmac = ${mac}

  I restarted the server autodeploy. Run vmware vsphere auto deploy v5.1.0.4058 version 774808.  My next step is to upgrade auto deploy later.

  

  Did you use stateless-cache option (defined in the profile of the host). This would have created the partition on your drive, remove it and try.

  Another possibility could be, downloaded to autodeploy image would be corrupted.  Download the image once more with the name of profile of different image and set to host and try to start the stateless person once more.

  Nithin-

• Laser Jet Pro 200 M251nw color: print job stuck in the queue

  I have problems with my color Laser Jet Pro 200 M251nw. I can print a MS word document and the printer works fine. When I try to print a second document MS word, that work remains stuck in the tail (spooling). I can't remove it from the queue. If I restart the computer, it went from the queue. If I print another document the process starts again. I know the procedure to remove a document from the queue but what I need to know is how to prevent them from getting stuck.

  Hello

  Please try the solutions in this doc.

• the strength of VM to perform a pxe boot?

  Is it possible to use the VI Toolkit for windows to force a virtual computer to the pxe boot at the start of the first (or next)?  If it was as simple as changing the boot sequence that would be ok.

  Thank you

  In my view, using the option bios.bootDeviceClasses in the .vmx file is a little easier.

  See also specify bootable for a virtual machine devices.

  You can run this script:

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.extraConfig += New-Object VMware.Vim.OptionValue
  $spec.extraConfig[0].key = "bios.bootDeviceClasses"
  $spec.extraConfig[0].value = "allow:net"
  
  (get-view (Get-VM -Name "TestPC").ID).ReconfigVM_Task($spec)
  

  It will not accept a boot from the network adapter, in other words a PXE boot.

  Subsequently, you reset devices to boot with a similar script.

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $spec.extraConfig += New-Object VMware.Vim.OptionValue
  $spec.extraConfig[0].key = "bios.bootDeviceClasses"
  $spec.extraConfig[0].value = "allow:hd,cd,fd"
  
  (get-view (Get-VM -Name "TestPC").ID).ReconfigVM_Task($spec)
  

  Note1: abbreviations for the bios.bootDeviceClasses parameter are:

  • FD floopy drive

  • hard drive HD

  • CD cdrom drive

  • net network adapter

  Note 2: this option does not change the boot order, it only changes the list of devices that the VM is allowed to boot from.

• When I turn on my computer, it gets stuck on the ultra-portable gigabyte 3 screen and custom which leave me there 2 hours still no luck the only button that works are TAB rebooting too

  Original title: stuck

  When I turn on my computer, it gets stuck on ultra-portable gigabyte 3 screen and custom wide movement which I gave 2 hours still no luck the only button that works are TAB restart too it can someone help please

  Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• [JS/CS6] How can I reach or remove text remains which is stuck in the XML Structure

  Sometimes, the remnants of the deleted text are found at a parent level or root of the XML structure. How can I 'find' scripts?

  

  Above, a sample image. The root should be just '<>' and there may be hundreds of items marked under the root, which should not be deleted. The only thing that needs to be removed is the text that shows inside the element root, because it is not in use anywhere.

  To fix it as I want, I can manually drag the document root, enter the editor mode (Ctrl + Y) and delete the text. I do in the editor mode to avoid the deletion of all the other child nodes of the root, which happens easily if I delete all the text in the textframe. When I delete the textframe, after you remove the top-level text which has been 'stuck' before, everything is nice.

  I'd like one to write a script that deletes the text which has got stuck in the root of the way which is shown in the picture (the root is not in the page, it should be empty in case I'm on).

  Defining the content of the xmlElement to "translates in all of the sub-elements being deleted (not what I want).

  Thank you

  Andreas

  It of not elegant, but should work. I can't think of a way to distinguish the 0xFEFFs that "contain" children of other 0xFEFFs that you may have in the history of the root, so that would leave all the ones you hang out.

  var root = app.activeDocument.xmlElements[0],
      i, character;
  
  if (root.parentStory.constructor.name === 'XmlStory') {
      for (i = root.xmlContent.characters.length - 1; i >= 0; i--) {
          character = root.xmlContent.characters[i];
          if (character.contents.charCodeAt(0) !== 65279) {
              character.remove();
          }
      }
  }
  

  Jeff

• App Store stuck in the update loop

  I use El Capitan 10.11.6 on a MacBook Pro for mid-2015.

  The AppStore automatically updated the operating system and a few apps today (2016-09-13). But the badge on the dock of the AppStore icon remains stuck at '1' indicating a waiting for update. This update uninstalled for iTunes 12.5.1.

  By clicking on the "Update" button next to this entry causes the app download slowly. Once the download is complete, the led shows "install...". "- but only for a few seconds. The installation runs. The badge of the AppStore never clears. The App Store still shows the 12.5.1 iTunes update is available. However, there is apparently no way to install it. I can click on the buttons to update again, but then he has just the same: downloads, tries to install and fails without error message.

  What now? I checked the obvious culprits (for example in ensuring the app iTunes is not open, reboot, etc) but no luck.

  FWIW, I also have a version of Parallels of El Capitan, which runs on the same machine. He knows exactly the same problem.

  Thank you.

  Restart your Mac, then check the App Store for the update of iTunes.

  You may resume the download.

• iBook Clamshell G3 stuck on the student lifestyle.

  History: towards 2006 my old primary school began to get rid of the old iMac in 1998 to 2002 G3s, iBook G3s and eMacs for some of the recent iMacs at the time. For some reason, my teacher decided to donate some of us students some of these old things (iBook G3 counterbore) but I never really took interest in using mines so far and it was stored in my attic for awhile. Now that I managed to pay 5 dollars for a new charger and adapter I finally activated the thing since 2006 and discovered a big setback on his thing.

  Make the problem: I'm stuck on the student mode (ideally the password is 123 on the screen saver lol) and I can't play Sloppy Sokoban 1.7 or look at some of the oldest educational programs on it! When my teacher gave me my he na not come with anything other than the device itself and now I need help to get the thing set to mode teaching that requires a password (whenever I press the button it remains on the page password anything) I forgot for a long time or at least get this thing a reset but I can't find a way in student mode because almost all the options for then do nothing or it will say that only the admin can access with certain privileges or something of the sort.

  Once more it's an iBook Clamshell G3 running OS 9.2 and I would like to reset the password on this issue through any possible means or backdoors and any help would be gladly appreciated.

  You will need a copy of the original software installation provided with computer discs, you can wipe the drive and install a fresh copy of the operating system. You will need to search on eBay, Amazon and Google to find the necessary discs because Apple is no longer provides them.

• AppleTV stuck on the screen with apple - I restart, held buttons...

  When I start my AppleTV he is stuck on a white screen with the Apple and black background (I can't move a plus). The light on the AppleTV has a regular blinking. 2nd generation (black with silver remotely).

  I tried unplug, wait a few seconds and plug it back

  I tried to hold the menu drop down and hold until the light on the AppleTV flashes very fast and

  Same result in both cases - stuck on the black screen with the white apple logo.

  Start here: get help with audio, video or power on Apple TV - Apple Support.

  TT2

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.