Download update 3 system

Similar Questions

• Vista updates will not install or download to the system

  When I try to update my windows vista by using windows update
  updates are not download on the system

  ALL THE TIME, IT'S THE STATE

  "0 KB TOTAL 0% complete"

  and I have downloaded a few of the updates manually, but everything does not progress further during installation that they show that "search for updates"

  I downloaded Vista sp1 manally, during installation, it gives an error code 0 x 80073712,.
  and it has some features don't appear in the Windows features dialog box, so I tried
  Sfc/scannow , but it gives a message "there is a system repair pending which requires the restart ends."  Restart
  Windows and run sfc again. "I restarted the translated run Sfc/scannow , but it gives the same message again.

  in Control Panel, tab updates installed, I found 2 windows updates point being (KB929300 and KB110806) installed, I try to remove them but they re appear in the list after the update, click

  Another thing is start the computer whenever a message "PLEASE WAIT" followed "updated CONFIGURATION"

  I try to install downloaded from microsoft windowsupdateagent30 - x 86 , but it also gives error 0 x 80073712
  

  I also try to install the file. Windows6 0-KB947821-v4 - x 86 , but no progress in installing is seen.

  I tried these steps in your response to my post at the start

  "Step 1:
  Stop the automatic updates service and Background Intelligent Transfer Service...

   

  Click on start / all programs/accessories. Right-click on "command prompt" and select "run as administrator". Click on 'Continue' in the UAC prompt.
  At the command prompt, type the following commands and press ENTER after each command:
  net stop wuauserv
  net stop bits

   

  Step 2:
  Rename the Catroot2 folder...

   

  Type the following commands and press ENTER after each command.
  net stop cryptsvc
  Ren %systemroot%\System32\Catroot2 oldcatroot2
  net start cryptsvc

   

  Step 3:
  Rename the folder "C:\Windows\SoftwareDistribution"...

   

  Type the following command and press ENTER.

  Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

   

  Step 4:
  Save the files used by Windows Update and Microsoft Update...

   

  At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
  regsvr32 c:\windows\system32\wuapi.dll
  regsvr32 c:\windows\system32\wuaueng.dll
  regsvr32 c:\windows\system32\wucltux.dll
  regsvr32 wups2.dll
  regsvr32 c:\windows\system32\wups.dll
  regsvr32 c:\windows\system32\wuwebv.dll

   

  Step 5:
  Starting the Service Background Intelligent Transfer, the automatic updates service and the event log service...

   

  At the command prompt, type the following commands and press ENTER after each command:
  net start bits
  net start wuauserv
  net start Eventlog
  output

   

  Restart the computer, then try Windows Update. "

  After that restart windows update give the same error code 0 x 80073712

  Hello, tanveerpallipuram

  Please use the Forum for answers!

  Do not forget that you have installed these three updates prerequisite for SP1:

  (http://support.microsoft.com/kb/935509/) A software update is available for versions of Windows Vista that include the BitLocker Windows Drive Encryption feature.
  (http://support.microsoft.com/kb/938371/)  (http://support.microsoft.com/kb/938371/) A software update is available for the Windows Vista installation components.

  If you are using 32-bit Windows Vista: download the update for Windows Vista (KB937287) package now.
  If you are using 64-bit Windows Vista: (http://www.microsoft.com/downloads/details.aspx?FamilyID=5639710d-dfbf-4527-806e-9a1634d0cc8e) download the update for Windows Vista for x 64-based systems (KB937287) package now.

  You can find more information at the following link: http://support.microsoft.com/default.aspx/kb/937287

  We can't wait to hear back from you with your results.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can't get the downloads to update my system

  I made a new clean install of win 7 pro 32 bit sp1

  have noticed after a few days, no updates have been received.

  Lhen go you to Windows Update and look for the updates there simply display nothing 'check updates' has been doing since yesterday.

  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
  I suggest before you stop and install the updates, disconnect from the Internet, first.

  My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.

  Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).

  Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
  To proceed with the installation of additional updates.

• I can not anymore my system Vista updated windows since a requested download update Norton 2010

  Hello.. I can not download updates for my windows vista... the alert lights, but I go to the windows Security Center and try to turn on the automatic update but... I get security center cannot get the message settings of update of security... everything was going well until I was asked to download updates of Norton on my internet security 2010... Please can you help me... Thank you... Keith

  Your subscription to Norton Internet Security is still topical?

  Have you contacted Norton (Symantec) Support or posted on the appropriate help Norton Community Forum about? -Online http://community.norton.com/t5/Norton-Internet-Security-Norton/bd-p/nis_feedback ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get a message saying "the media content is not displayed correctly. It is recommended to update your system drive now. Is it safe?

  I just installed Firefox on a new machine. The message indicated in the question appears frequently. The updater executable is called "setup.exe, developed by Bechiro S.L. Norton call this file "Unproven", unknown stability, very few users, very new, not proven.

  Is it approved by Mozilla or is it malware?

  Do you recommend running the installation?

  Hello sperrybream, no download that is not from mozilla.org is approved by mozilla. as you have described the issue, it seems certainly doubtful ("It is recommended to update your system drive now" - there is no such thing as a system drive) & I would definitely recommend not not to react on the popups from unknown sources.

  In addition, you have a malicious this addon. Please go to firefox > addons > extensions & Delete SuperLyrics-16 0.93.19 & GamingWonderland 5.40.2.42655. also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a scan of your security system complete different tools like the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• Cannot download updates to buy apps from the app store

  Apple support communities, someone please help on my iMac I can't download updates of the apps I bought in the app from app store. iMac 21.5 in mid 2010 processor 3.06 ghz intel core i3 with 16 GB of memory and a hard disk of 2 TB. Please email me at * with some help how to solve this problem. I even reinstalled the software system and update of OS X EL Capitan version 10.11.4 now running. Thanks in advance for your help.

  Carlos Zaldivar

  < email published by host >

  Not a good idea to post personal information on a public site.

  This is a user help forum, and help you here through these threads. Can you explain what keeps you update your applications?

  I'll ask the hosts to change your personal information.

  See you soon,.

  GB

• How to replace "apply downloaded update now" with "Check for Updates" in the menu help when the update fails because the downloaded update files are missing but the "Ready to install update" window keeps appearing?

  Question

  I have another type of problem with Firefox

  Description

  Window "Ready to Install" Firefox "Software Update" appeared. The folder "C:\Program Files\Mozilla Firefox\updates\0" contained the files update.mar, update.status and update.version. Each of the 3 files have been deleted. The next time that Firefox has been started, no update occurred because update files were missing. In the Menu bar, clicking Help showed in the menu drop-down that "apply downloaded update now" was always on the list. By clicking on "Apply downloaded update now" open "Software Update" window "Ready to install update", so that Firefox still considers that the update files exist, but they do not. In the window "Software Update", by clicking on "Restart Firefox" restart of Firefox, but once again it there's no update, and remains "apply downloaded update now" on the Help menu. How can "Apply downloaded update now" be replaced by "Check for Updates" so the update files can be downloaded?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3

  Plugins installed

  • npmnqmp - 989898989877
  • NP-mswmp
  • Adobe PDF plugin for Firefox and Netscape "9.3.2.
  • Default plugin
  • Foxit Reader plugin for Firefox and Netscape
  • Shockwave Flash 10.0 r45
  • Version 1.0.3 copyright 1996-2009 The VideoLAN Teamhttp: / /www.videolan.org/

  You can manually reset the software update feature by closing Firefox and remove the file "updates" (which seems you have done) and the two files "active - update.xml" and "updates.xml" - these are in the installation (C:\Program Files\Mozilla Firefox) directory or in the profile folder (C:\Documents and Settings\nom_utilisateur\Application Data\Mozilla\Firefox\Profiles\something.default).

  If it does not, see our KB article How to resolve the failure of the update of Firefox update error message - the section of 'last resort' can be useful, or or read this article from MozillaZine KB, software update.

  Please let us know how the above work, and if we can be of further assistance.

• G42 355TU: windows 7 does not download updates

  I have a problem when downloading the updates of windows 7.

  I m running 64-bit Windows 7 Home Basic edition.

  He always downloaded the updates and install them himself.

  but suddenly he stopped it making. I tried to download and install manually, but no gain.

  -WHAT HAPPENS WHEN I DOWNLOAD UPDATES?

  my watch 31 windows updates (231 MB) are found

  When I download updates, it starts the download, but its status remains downloaded OKB (0% total downloaded)

  and a few minutes later it displays the CODE of ERROR: 80246008

  .

  So, I ran to troubleshoot. Also, I tried Microsoft Fixit, always no gain.

  .

  In addition, a few days back I installed ccleaner and with the help of ccleaner, I wiped my computer cdive, I know not if that created the problem.

  Need help

  I tried everything, control and finally found a solution. The problem was the following key in the registry: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Then, I added and tried to start BITS. It worked for me.

• is it safe to download updates pilot ubunto OS on a dv6 pavilian 1352dx

  HP pavilian dv6 1352dx, my son is a scientist who has implemented this his computer laptop old (for him) to me as a gift, and it is now running an ubuntu operating system, I can download updated driver as if he were still on windows 64-bit, thanks-i am 67 years old and computer savy at all , and he is out of touch, thank you

  My friend

  To install the drivers for Windows 7, you need Windows 7 on your machine. It runs now Ubuntu then drivers or any update for Windows 7 will not work.

  Kind regards

  PS. I'm very close to 67, can I call you a friend?

• 80096010 downloading updates

  Original title: 80096010

  I get this error 80096010 code whenever I try to download updates to update from microsoft that it wont let me update whatever it is like will receive are going to download something, it blocks the saying that the digital signature is not right so im assuming that its any link with the same problem thanks in advance for any help...

  Hi Madting67,
  Thank you for visiting the Microsoft Answers forum.
  Scan SFC will let us know if you have any corruption in the file system.
  Follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Post back with the results,
  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error code 8024000, unable to download updates. __

  error code 8024000, unable to download updates.
  I tried the race with your command line does not work so far. I even changed the 32 to 64 since I was the 64-bit operating system, but still no luck. all of the suggestions. I have a Windows 7 operating system

  Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0x8024000B".
  http://support.Microsoft.com/kb/958040 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been...
  How long this update problem occurred?
  What is the suite of security/antivirus installed and is a 3rd party firewall used?
  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  You can reset the Windows Update components by running the Fixit on this page. But, if there is malware present, she will continue to reset the connection to the update servers:How to reset the Windows Update components
  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  MowGreen Services update - consumer safety

• Windows Update crashes when you try to download updates. (2 different BIT errors)

  Windows 7 Pro 64 bit. AVG free.

  When I press "install updates" in the windows update window, it says downloading updates... 0 percent and it freezes.

  After a long time, itll fail and give me code error 80246008. I did what was said on this site, and it still doesn't work. http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

  I don't know if because it is not windows 7 specific, that i should even have to do that. The problem is that whenever I start CUTS in services, itll give me the error:

  "Windows didn't start the Service on the Local computer's Background Intelligent Transfer." For more information, see the system event log. If it is a non-Microsoft service, contact the service vendor and refer to service-specific error code - 2147024891. »

  In the event viewer, I have 2 errors. The first said "the BITS service was able to start. 2nd one that follows, error 0 x 80070005. ' said ' the Background Intelligent Transfer service completed with the specific service error %-2147024891.. »

  Anyone have any ideas?

  Thank you!

  Thanks Kim, but could you be more specific about where the path of % ALLUSERSPROFILE might actually be on a standard installation of C:?

  I don't think that this folder exists nowhere in C:/users, including hidden files. Would be - it different in Windows 7?

  EDIT: Thanks for the help guys, I decided just to format, because that would be a guaranteed solution and everything seems to be working again now.

• 8000ffff cannot download updates

  Can't download updates - error code 8000FFFF - tried the automatic fix is not working

  8000FFFF - generic unexpected error

  Could be due to corruption in the registry values
  'PendingXmldentifier '.
  "NextQueueEntryIndex.
  "AdvancedInstallersNeedResolving.
  under the registry key: HKLM\Components.

  1. Click Start and in the search box type in regedit
  2. A new program will appear in the same window. Now right-click the regedit program and then select the run as Administrator option.
  3. Navigate to HKLM\COMPONENTS - look to see if these values exist under
     key COMPONENTS:

  PendingXmldentifier
  NextQueueEntryIndex
  AdvancedInstallersNeedResolving

  If they exist, delete the three values.

  NB: Before deleting him no matter what in the registry, make sure you that you back up the key - click the file option on the main toolbar, in the drop-down menu, select export all select in the export registry file dialog box.

  Type a name for the file, and then click the "Save" button

  If something goes wrong, everything you have to do is then click on the option in the file of the main Registry Editor toolbar, and then select Import

  WARNING: Editing the registry can cause serious problems that may require you to reinstall your operating system. Use the information at your own risk.

  4 restart the computer.

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

  Other suggestions mentioned here:

  http://taurarian.MVPs.org/WU_Vista/8000ffff.htm

  TaurArian [MVP] 2005-2010 - Update Services

• Windows Update will now download updates, many different error codes, Control Panel does not open.

  the main problem would be not to download updates, my icon appears in the lower right of windows but I can't open reguradless of what method, control panel and update windows stand closeing

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------------------------------------------

  After the foregoing:

  What antivirus/antispyware/security products you have on your machine? Include all that already been including
  those that you uninstalled. (These can leave leftovers that can cause strange problems.)

  A search for all most .cpl files will be in "C:\Windows\System32" However, you can have others. Click
  each of them at a time and see if it does not start - if so right-click on it and rename it using cpZ as the extension is is to find. Retry Control Panel - if no joy persevering of all .cpl files. (Note that others are under other files under C:\Windows not should be judged, because they are not active).

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and others.

  Try these in case the General corruption has a role to play:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ---------------------------------------

  Icons do not appear in the Control Panel, or you cannot start Control Panel, Windows Welcome, or
  Games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  It was reported a updated driver it has blocked, so have you updated drivers
  lately? Also check the driver updates in Windows Updates.

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.