Drag and drop the copy of the files of massive

Similar Questions

• How can I make use of TC partitions and make sure that the file analysis is on the right partition?  I do not see the partitions that I have done in the Finder, but I can drag and drop the files in the folder 'Data' unique under Finder/Shared/TC.

  MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.

  Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.

  So far, I've implemented the TC and set up Time Machine on the TC.  I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.

  Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data".  I was expecting to see my two partitions here.  Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here.  I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?

  I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine.  How can I make sure that the file analysis is on the appropriate partition?

  I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen.  How do I point time Machine for one of the partitions?

  Thank you!

  In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.

• When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Users/student/movies / '.  I want to be able to drag and drop the files, by clicking on the SD icon on the desktop and drop it in

  When I try to import new files from an SD card, I get an error message.  The message reads: "If there is already a file in: / Useres/student/movies / '.  I want to be able to slide the SD card on my desktop icon in the quick editing workspace and select the files I need to change.  Thank you!

  You are on a network in a school? If there might be one video files with the same name already exists in this folder.

  Try to get the video files using add media videos from camcorders or cameras and by accessing the camera or the card reader by using the video importer. In the video importer, you can set the custom file name and rename your files so that they will not have the same names as existing files.

• Drag and drop the files to the phone?

  I drag and deposited a few files in the download folder on my motorcycle G that appear when I consult the files via the Start-computer-phone-downloads of routing, but do not appear when I have access to the file through the phone. What I am doing wrong? One is a .pdf manual and the other is a simple .txt file.

  Appreciate your help

  Use any file Explorer (personally i use Es File Explorer) & now go to download the file where you move your stuff. You will see your stuff. If you still do not find then reboot your phone & reopen this case.

  You can also use any .pdf or adobe reader Viewer to directly read the .pdf file to use.

• Why creates shortcuts for Moving files when drag and drop the folder or file in another folder?

  I am using Windows XP SP3, just before I drag and drop the file into another folder in my windows explore. Suddenly, he is creating shortcuts for moving file. I'm not able to move the file by drag / move the mouse, it is possible that by cutting and Paste(Ctrl+X) using the keyboard. Why?

  Maybe your 'Alt' key is stuck.
  See exchanging the keyboard with another makes all the difference.

  HTH,
  JW

• I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

  I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

  Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

  have you tried using a different suite of cd/dvd burning?

  Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

  There may be something to play with your access keys if you have a (ie., wirekeys)

• Drag and drop the game - add your comments

  Hello

  I created drag and drop the game:

  If the player, drag the object to the correct target - snapping to the target, else it returns to the original location.

  My question:

  I want to add sound (such as feedback) when hanging to the right target.

  What should I write in the code?

  Help, please

  Thank you (-):

  (I added the code and the printscreen)

  star.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag);

  function fl_ClickToDrag(event:MouseEvent):void

  {

  star.startDrag ();

  }

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop);

  function fl_ReleaseToDrop(event:MouseEvent):void

  {

  If (star.hitTestPoint (targetstar.x, targetstar.y))

  {

  Star.x = targetstar.x;

  Star.y = targetstar.y;

  }

  else {}

  Star.x = 692;

  Star.y = 232;

  }

  star.stopDrag ();

  }

  square.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_2);

  function fl_ClickToDrag_2(event:MouseEvent):void

  {

  square.startDrag ();

  }

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_2);

  function fl_ReleaseToDrop_2(event:MouseEvent):void

  {

  If (square.hitTestPoint (targetsquare.x, targetsquare.y))

  {

  Square.x = targetsquare.x;

  Square.y = targetsquare.y;

  }

  else {}

  Square.x = 122;

  Square.y = 266;

  }

  square.stopDrag ();

  }

  

  create your sound (using the new construction), then apply the play() method to make the sound when your hitTestPoint is real.

• codesnippent createjs equivalent of flash as3 drag and drop the code snippet

  AS3 deafult code snippent for drag and drop

  circle.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag_3);

  function fl_ClickToDrag_3(event:MouseEvent):void

  {

  circle.startDrag ();

  }

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop_3);

  function fl_ReleaseToDrop_3(event:MouseEvent):void

  {

  circle.stopDrag ();

  }

  I just tried to convert this code createjs. but my code does not

  / * js

  var t1 = this;

  {circle.addEventListener ('mousedown', function (e)}

  {stage.addEventListener ('stagemousemove', function (e)}

  T1.x = stage.mouseX;

  T2.y = stage.mouseY;

  });

  {stage.addEventListener ('stagemouseup', function (e)}

  e.target.removeAllEventListeners ();

  });

  });

  */

  are you trying to drag and drop the circle?  If so,.

  var tl = this;

  tl.circle.addEventListener ("mousedown", downF)

  function downF (e) {}

  stage.addEventListener ('stagemousemove', moveF);

  stage.addEventListener ('stagemouseup', upF);

  };

  function upF (e) {}

  stage.removeAllEventListeners ();

  }

  function moveF (e) {}

  TL. Circle.x = stage.mouseX;

  TL. Circle.y = stage.mouseY;

  }

• I want out emails in folders of ordinary files, but when I drag-and-drop, the "modification date" gets changed. How I can still see the date?

  To archive my e-mail files until I decided to switch to Thunderbird, I create regular folders in windows and drag and drop emails to outlook express in the appropriate folders. The "update" column displays the original date of the email... which is what I want to do with Thunderbird. In my view, that he treats it as a new file created today... that is not good for my archiving system of these professional work files that I need to find often in approximate date.

  I understand the forum that it is by default in Thunderbird. There is an add-on that can do what I'm doing?

  Thank you in advance,
  Netwon

  I think the reason what OE is the original date because each message is stored in a single file, while TB stores all messages in a folder in a file, an mbox file. Thus, when you save a message as a single eml file, its 'modification date' corresponds to the eml file date was written in the mbox file.

  You can find the ImportExportTools add-on useful because it allows you to add the date of the e-mail eml file name when enamel is exported ("Save selected messages" of the message right-click menu).

• How to keep the spaces outside the files when you drag and drop them in a .bat file.

  I have a bat file, where I run a powershell script passing one argument which is a folder name. I added the file beats in my office, so I could just drag and drop a folder in the Explorer on the bat file.

  Works very well. With the exception of a killer detail. When I drag and drop a folder that has spaces, the process does not receive the full path. Space is causing the script to fail. Thus, for example, I can't drag & drop c:\program files\ in the bat file.

  Is there some setting in which case I can force drag & drop to use filename not spaced? Why don't the OS automatically in the argument with the quotes around it?

  In a command environment that it is practical common to surround with quotes of files names. If the names contain no spaces, then double quotes can be omitted. That is why your batch file should read

  PowerShell.exe myscript.ps1 "%."

• Drag and drop the email from windows to the folder my documents

  I am trying to drag and drop an email from Windows mail to a folder in my documents each time I do I have an option to copy and replace or do not copy. I just want to copy it here is another option or I can change to get it to copy the settings. I'm sure that once there was before me a third option so that it can be copied, can someone help me please.

  Drop into a different folder itthere and renmae before moving on to the final
  folder.
   
  --
  ..
  --
  "SS0001" wrote in message news: f9a3b155-6263-4000-89c 0-596bcea9a814...
  > I get emails from the same source, on a weekly basis and the program
  > think I want to update the existing emails with new emails, but I just
  > to add new emails to the existing e-mail file, make
  > you know how I can fix this?
   
   

• Drag and drop the LARGE icons

  When I drag and drop a file or a folder in an Explorer window, the icon attached to the mouse pointer is HUGE and gene to see where I am a fall! Is it possible to change this behavior?

  Thank you!

  Thank you, Andre. What seems to do is change the appearance of a window of the Explorer when it is moved - it makes the contents of a window disappear until you drop it somewhere. I am concerned mainly with the HUGE icon that appears when I right-click on one or more files and then try to have them slide somewhere. The large icon, it is difficult to see where I am dragging to. For example, if I want to move a file in a specific folder it makes it difficult to read the folder I want to put the file.

  Using your tip, I found a solution that works for me, but maybe not to everyone's taste. If you go to advanced system settings > performance > settings then uncheck "Use Visual styles on windows and buttons" makes things look more like Windows XP. I prefer the simple XP look in any case so that the solution works for me. The icon HUGE should simply be part of the visual style Windows 7 - I couldn't find any other way to change this.

  Thanks for your help!
  Mark

• Drag and drop the thumbnails on the desktop (Acrobat XI Mac)

  Acrobat 9 Pro, I'm able to drag one or a group of thumbnails on the desktop, where it would create a pdf file "Untitled extract Pages.pdf" with these pages to the desired location. I could then easily rename the newly created document as I wanted. It's a one-step drag-and-drop.

  Step 1: Drag the pages to the desired location

  Step 2: Rename the resulting file.

  But in Acrobat Pro XI, when I try to drag the photos on the desk, I see the folder in that I want the file to go is highlighted by the drag icon, but nothing fell. Instead I have to:

  Step 1: extract the pages you want

  Step 2: click OK in the extract dialog box

  Step 3: Command-Shift-S to save the file under...

  Step 4: Find the folder which I want to save the file

  Step 5: File name

  Step 6: Click on save

  Is it possible to get the procedure more simple that worked so well in Acrobat 9?

  I am on OS 10.11.6

  Hello

  I want to mention that in Acrobat XI, there was a problem with the feature you mentioned (on Mac) and has been corrected in Acrobat DC.

• Drag and drop the library not workingf

  I placed a number of graphics (.ai .ps, .eps, .pdf etc.) in a CC library. When Im in InDesgn I can see the items in the library, but when I try to drag and drop them on an open page, I get a message saying "the file does not exist or the file may be in use by another application."

  I've restarted the computer and only Indesign open so that the files are not in use.  The library icons next to the items. I can double click and use goods have been placed in InDesign, but the files in photoshop or Illustrator won't drag-and - drop or double click for use in InDesign.

  Is this to say that I cannot use InDesign created elements of library in InDesign and photoshop only elements in Photoshop etc. ?

  Carl

  I have the same problem

  I repeatedly appealed to tech support, but they couldn't help

  I solved the problem in this way:

  1. launch InDesign

  2 - Open a new document

  3 to drag and drop objects from the library CC

  4. I read the error message :-((()

  5. I swear :-)

  6. close InDesign

  7 - Repeat the pp. 1-3

  7A - if this does not work, I have to open Illustrator object and drag-and - drop library in Illustrator. And then I repeat s. 1-3

• Drag and drop the CS6

  For some reason any I can't drag and drop files in decayed CS6 requests from Windows Explorer.  Not even a bridge.

  I get the circle with a line through it when dragging to open Photoshop, first, After Effects.

  Is the only way to get the elements file > open...

  Is drag / move, tapped, other?

  It works fine for me on Windows 7 Home and Pro, so maybe there is something on your system that is the cause?

• Drag and drop the textfield

  Hello.  I'm looking for the design of a few text fields.  What I want to do, it is open a flash document, add a text field and save it as a swf file.  I then have to load these swf using xml and provide drag and drop functionality.  Is it possible to record only a text field, with no experience or anything like that?  So if I add a text field to a document set to 320 by 280 and save the swf when I load in my document, I want not just her either 320 in 280.  I just want it to be the text field.  Can I do this?

  see you soon

  No, but you won't see any difference between what is really happening and what you want.  the only difference is that if you want to refer to the textfield, you will use the content property of your charger to the main timeline of the loaded swf file to reference and use the dot notation can reference the textfield object.