draw lines parallel to the y axis in chart

Similar Questions

• Several colors of background on a GOLD-table fill to draw graphical point * behind * the grid lines

  I have some a matter of aesthetics.

  I wrote a program that displays data for binary files. These binaries have blocks of data, an hour or two. Each piece is a playback window, and there are a handful of reading windows per day.

  The data view is in effect, what I'm working on now is a more intuitive way to choose what data should be displayed.

  My goal is to have a graph of waveform with the X axis represents a day full (0 - hr 24 hr) and is indicated on the chart what time windows are available for review, that is, data have been collected. The background of a "collected" window will be yellow (or another color), while times in the course of which no given is collected will be black. The user will then drag the sliders to select the window of what he or she wants to see the data.

  It was quite easy to achieve by drawing the curve a digital signal (1 for data collected during this period, 0 for no) and point-fill with yellow to zero. My only problem with this solution is that filling point appears on the lines of the grid, that does not look quite right.

  Y at - it an easy way to get the grid to appear at the top of the charts, or is there a way to programmatically set multiple background colors (it could do the same thing)?

  Use the property "draw pictures" and draw your own grid before image.

• draw lines on the graph of the intensity

  I want to draw lines on the graph of the intensity.

  I am already looking for some questions before.

  I know there is a vi could draw line on the graph of the intensity by dragging the mouse.

  But I need more precisely what set the length and the angle between the horzontal line.

  The setting is very ideal for me. But I don't know how to use it in the intensity chart.

  Is there anyone can help or give some advice?

  Your example is not so great because it uses 100% of CPU on a kernel at any time, do nothing.

  Here's a quick rewrite of my old example here. He draws an angle with the specified length and angle to where you click on the chart. This should help you get started. Modify if needed. (Also remember that trigonometry is much easier when using complex numbers )

• I have an invisible background and I want to just use a bursh paint to draw lines thick som to create a cache. the brushes do not seem to paint.

  I have an invisible background and I want to just use a bursh paint to draw lines thick som to create a cache. the brushes do not seem to paint.

  Hi Normannixon2,

  Could you please confirm whether the background is Transparent or white.

  Also when you use the Paintbrush tool, please check the opacity and flow of the Brush tool.

  Kind regards

  Tanuj

• using annotations of drawing, line free hand; How can you apply a fill or shadow of the object/area?

  using annotations of drawing, line free hand; How can you apply a fill or shadow of the object/area?

  You can not. The fill color property applies only to the following observation

  types: circle, square, line, Polygon, PolyLine, FreeText

• How to use parallelism in the RMAN script with multiple lines

  Gurus,
  
  Need your advice on the use of parallelism in the script "BACKUP AS COPY DATAFILE" have several lines.
  
  I have a script like below:
  
  SET UP THE DEVICE TYPE DISK PARALLELISM 10;
  backup copy datafile ' / data1/oradata/PROD/data01.dbf' size '+ DATA ';
  backup copy datafile ' / data2/oradata/PROD/data02.dbf' size '+ DATA ';
  backup copy datafile ' / data3/oradata/PROD/data03.dbf' size '+ DATA ';
  backup copy datafile ' / data4/oradata/PROD/data04.dbf' size '+ DATA '; and so on...
  
  If I run this script, it runs in the order. How do I in parallel can I copy data files required?
  I selectively copy a few files in ASM.
  I want to use a single script.
  
  Please notify.
  Best regards
  David
  
  Published by: 966454 on October 18, 2012 23:59
  
  Published by: 966454 on October 18, 2012 23:59

  Try to use only a backup statement with the manual channels and parallelism configured as stated in my previous message. For example:

  CONFIGURE DEVICE TYPE DISK PARALLELISM 3;
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '+DATA1/%U';
  CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '+DATA2/%U';
  CONFIGURE CHANNEL 3 DEVICE TYPE DISK FORMAT '+DATA3/%U';
  BACKUP AS COPY DATAFILE 4,5,6;
  

• small line blurred on the iPhone 6

  Updated version

  About 2 months ago, I dropped my iPhone 6 and she fell, there is a crack in the root of the hair that crosses the screen. I didn't mind that. When I got home today I went on instagram and noticed about 3 mm from the crack there is a blurry line. I thought the screen was dirty so I wiped it off with a glasses cleaning cloth. I turned on the screen and it was still there. At this point, I thought it was just in the middle of the screen. So I thought that maybe if I turn it off then back on it would go. When I did, I saw that it came from the upper right, when displaying the apple logo. The line is a little blurry and tinted. At the time I finished writing this, I went to check my phone and the line clearly shows on the corner and going down. The line is parallel to the crack and does not come in contact at all with her because the curves of the crack before hitting the corner. The line has not increased at all I just more defined. The only thing that makes the sense is water damage but there is only a small line and the line would have started to crack if it was because it seems to be no other way water could get, and the only contact he had with water is rain drops of rain but it was a few days ago. And if it was the water damage that the phone would shut down and not turn on and would be of different colors. I don't know a lot about the water damage and phones, the only thing I know is when I dropped my phone in the milk and it was liquid as lines, but on my phone line is a straight line and thin enough.

  Here's a picture of him that you probably can't see it that way, but I put it on the screen of the software update is no longer visible because there are fewer colors

  magcon lover wrote:

  Updated version

  About 2 months ago, I dropped my iPhone 6 and she fell, there is a crack in the root of the hair that crosses the screen. I didn't mind that. When I got home today I went on instagram and noticed about 3 mm from the crack there is a blurry line. I thought the screen was dirty so I wiped it off with a glasses cleaning cloth. I turned on the screen and it was still there. At this point, I thought it was just in the middle of the screen. So I thought that maybe if I turn it off then back on it would go. When I did, I saw that it came from the upper right, when displaying the apple logo. The line is a little blurry and tinted. At the time I finished writing this, I went to check my phone and the line clearly shows on the corner and going down. The line is parallel to the crack and does not come in contact at all with her because the curves of the crack before hitting the corner. The line has not increased at all I just more defined. The only thing that makes the sense is water damage but there is only a small line and the line would have started to crack if it was because it seems to be no other way water could get, and the only contact he had with water is rain drops of rain but it was a few days ago. And if it was the water damage that the phone would shut down and not turn on and would be of different colors. I don't know much about the water damage and phones, the only thing I know is when I dropped my phone in the milk and it was liquid as lines, but on my phone line is a straight line and thin enough.

  Here's a picture of him that you probably can't see it that way, but I put it on the screen of the software update is no longer visible because there are fewer colors

  A. you have deposited your phone.

  b. you dropped your phone in millk - what is still liquid.

  you either deal with the screen or go to apple and buy one out of warranty iphone.

• Is it possible to scroll on the y-axis of a graph of digital waveforms?

  Hello!

  I use LV 8.5.1 and I want to draw 64 signals on a graph of digital waveforms.

  But if the graphic is too small, I see not all signals, and if I enable auscale on the Y axis, so the signals are not recognizable.

  Is it possible to activate the scrollbars on the y-axis?

  Thank you.

  Hello!

  Try to use the nodes property Y scale with a slider horizontal/digital control. As:

  

  Find it here:

  

  I hope this helps!

• How to draw a graph using the vision assistance

  Hello Sir,

  I have attached my work and try to draw a histogram image that was created in the express vision, but I don't have no idea where and how to connect this XY graph, however I know that it is essential to use . What is happening in the vi is I'm tracing the minimum value + value of the interval on x axis and maximum value on the y-axis, but do not know how this graph will connect and work. Please help me put in the Please this problem.

  Best regards

  Jawad

  Hi uses "IMAQ polygon" with waveform graph.

• laptop HP pavilion 17 64-bit: draw lines on your desktop

  can someone explain how to draw lines on the desktop? I am currently working on a project that requires lines to be drawn on some of the pictures on the desk. to make things more complicated, I don't use a mouse, and my computer has not left and right click buttons! He has a very sensitive touchpad, so there is not to hold a left or right button as possible on most computers. so, for the moment I tenderly your help there, to try to solve this problem. If there is a solution, that is! I have to admit that this is something new for me, but you live and learn to do not you?

  Thank you very much in anticipation.

  Glad to hear the clicks of mouse work for you about the graphics program, it seems that you need something which will give you a fairly accurate line length measurement while you draw the line is - that correct? Photoshop Elements can meet your needs. In my opinion, it costs about $80.

  In Photoshop Elements, while using the online tool, it gives you a measure of angle in real-time and (to the thousandth inch) length of the line you draw. Here is a picture to demonstrate:

  

  Only a slight glimpse of the line appears while you actively draw, then the complete line appears after you release the mouse button. You can customize the line to any desired pixel width. Each new line creates a new layer 'Shape' on top of your image, which can then be resized or moved or otherwise handled, according to the needs.

  I hope this helps. Your assignment seems deceptively simple please let me know if there is anything else I can do to help.

• draw lines on a map in paint

  Hello

  How to draw a line on a map in the painting of windows 7 with the line tool?  in older versions of paint, I could draw a line and click and then move to the next area.  in windows 7, I can draw a line, but there are two white dots at each end.  I clicked, double clicked, right click... nothing changes.  the only way to get the line to stay on the plan is to stick and the back arrow.  If I paint multiple directions on a map, it gets old fast.

  so, how to draw any line of the size of the point a to point b and he can stay?

  Thank you

  After experimenting with the whole program, I can now draw lines and place them where they should go on any card.  He just took the time to experiment and try different methods.

• Draw lines based on values from database

  I want to draw the line based on the data from database.

  Number of lines will be the number of records in the query.

  line length will be based on the value of the column in centimetres.

  by example, if the query selects 3 folders 3 lines will be drawn.

  If the first record column value is 5 then 5 cm line will be drawn.

  Thank you.

  Please find the sample report and xml.

  Kaya.

• Cannot be joined lines when using the line Segment tool

  So unfortunately, I've updated to the latest version of Illustrator Cc (V19.2.1). And to my horror, I can no longer draw a line (with the line segment tool) then draw another line, coming from the previous those anchor point. When I try to shoot immediately. He's trying to turn the line rather than create a line joining... anyway to change that or am I stuck with it?

  (Also, I use windows currently..)

  http://Tinypic.com/player.php?v=iqc0mc & s = 9 #. Vr5gifJ95hE

  I don't know if you can say/see/see in the video, but here's the process that I'm following departure using the line-drawing the line-> > segment trying to draw a line from that anchor point (and that is the question, when I'm doing it automatically, it assumes I want to transform the line)-> changes to the tool selection and clicks on the line to deselect-> goes back and finishes object, repeating the process.

  Help me please... I'm desperate...

  It is these new life forms, a few disadvantages too with the rectangle tool, ellipse etc. tool.

  to go back to the old behavior

  Object > shape > expand the form, do a deed for him, or do what I did a hotkey (Windows 7).

  Edit > keyboard shortcuts > Menu commands > object > shape > expand the form , then in the first box to the right click in it, select and press a key on the keyboard, I choose F9, OK and name.

  It's an extra step, having to have a finger on the mouse and the other on the keyboard for each line. but I can't think otherwise.

• How is - what cut you a rectangle in 2 colors with a diagonal from top to bottom?  Once I draw a diagonal with the online tool I am at loss to create 2 color split?

  How is - what cut you a rectangle in 2 colors with a diagonal from top to bottom?  Once I draw a diagonal with the online tool I am at loss to create 2 color split?

  Rosemary,

  A simple way would be to:

  (1) give the rectangle a color, then Ctrl > Cmd + C + F;

  (2) use the direct Selection tool, and then deselect (click and empty space), then click on the opposite corner to the part where you want to keep the color, then press DELETE, then change the fill color to the other.

  Or, you can ClickDrag with the line tool along the diagonal line from corner to corner (guides are your friends), select it all and Pathfinder > divide, then select live from the triangle where you want to change the color and change.

• circles and drawing lines

  How to draw lines and circles? Thank you.

  Using various annotation tools available under the comment Panel.

  We sea, Sept. 23. 2015 00:48, peterg21588935 [email protected]>