Dreamweaver 5.5CS adding 5 tags < BR > in LIVEVIEW, not in the code, but it appears on the published page.

Similar Questions

• Trying to simply open a .html file using file:// on Linux - it is adding an extra slash and do not find the file

  Ideally, I would like to be able to launch Firefox from my Linux command line and just open a file html on my hard drive. Not knowing the exact syntax and do not receive a love on my first attempts, instead, I launched Firefox and typed file://path/to/myfile.html in the address bar. However, instead of seeking to "path/to/myfile.html" Firefox is adding an extra slash and declare that it does not find ' / path/to/myfile.html'. I tried a few variations but seem not to be able to work around this problem.

  Any suggesstions?

  The file: Protocol takes 3 slashes after the colon for some reason any.

  Is your shell allow you to right click on the file and open it in Firefox? That would be the quick and dirty way to discover the path that prefer Firefox.

• Facial recognition tags not appearing is not in the people page after his conversion to the PSE11 and people

  Hi Forum

  Upgrade from 10 PES to PES 11

  Attention, having spent more than 3 hours, using the characteristic face in 11 elements of marking (because it uses tags to people from earlier versions to complete the new people tab). I can only say that the result was less useless. I have now more than 1200 images marked with the wrong people and several bad people. And worse still the person who should have been marked is not there at all!

  I noticed that during the process of marking the image displayed to provide that a name is not the image in the selection of the view full screen - it actually displays a different image. So my guess is that this isn't really the face of marking you see but apply the tag to the image he thinks that that is.

  The result is total garbage... What a waste of time and effort. Not happy at all. What will be the software Adobe Version work, hard lesson learned here.

  Concerning

  David

  Title of the message was edited by: Brett N

  Just to clarify, when you convert a catalog from a previous version of the organizer of the elements to version 11, the people page is filled with tags keyword under the category (and its subcategories, which become groups). If you have organized your keywords so that you have people (even those created using facial recognition) tags in a different category than people, they will not show upward on the people page.

• Adaptive tags: pt: data .currpagedata - could not get the current page id

  I use a Basic Page layout and need to create a DIV box which is linked to the Page ID - < div id = "pt-page-1234" >. The Page ID must be inserted dynamically when you navigate around the pages.
  
  I try to use the Adaptive tags pt: data to get the ID of the current Page; Therefore, I am currpagedata. When I use the attribute of the object ID of the object, I get the Community ID (which seems to be a bug).
  
  Does anyone know how I can get the current Page ID on a pt tag: data? Here is my current code:
  
  < pt:ptdata.currpagedata pt:id = "currPage" / >
  < pt:logic.foreach pt: data = "currPage' pt:var = 'temp' >
  < pt:logic.variable = pt pt:key: value = "$temp.objid" / "currPageId" >
  < /pt:logic.foreach >
  < pt:logic.concat pt:key = 'target' pt:value1 = 'pt - page -"pt:value2 ="$currPageId"/ >
  < pt:core.html pt:tag = "div" id = "$target" >
  
  I get... < div id = "pt-page-245" > but the page ID is 4015
  
  Published by: user11124236 on July 2, 2010 10:44

  Hello

  This may be too late, but for other people who have the same problem, use. PageID instead of .objid (case-sensitive).

  
  
  
  
  
  

  See you soon,.

  Jefi Santoso
  Collaboration technologies (http://www.collaborativetechnologies.com.au)

  Edited by: jefis on 14-Sep-2010 17:20

• Recordsets disappear menu when adding mysql_query (&amp; quot; SET NAMES 'utf8' &amp; quot ;); below the connection in php

  I hope someone can help with this. I am trying to create a dynamic site using dreamweaver CS3, with php5 and mysql5 in the background, but I have trouble with endangered recordsets in the server behavior menu when changed the code to allow game characters or define names for utf8.
  
  For awhile, I had a problem getting my main list dynamically generated pages (for example, lists jobs) to display international characters like an e accented french (and other languages) and that they display correctly when seen in phpmyadmin also. So, I placed headers at the top of the page for utf8 and created the metatag content to utf8 in the page code. Where which I added ENT_QUOTES utf etc. to htmlentities and added accept-charset utf-8 in the < form > action RADIUS.
  
  (one thing I did not in the range of form, is to add < enctype = "multipart/form-data" >, but I don't know if it will make a difference)
  
  In the backend, the innoDB database is collected and built using utf8_unicode_ci. I am on a shared host - so cannot directly access php.ini or adjust the settings to connect via phpmyadmin. But I can't write the files .htaccess (currently with the defaultcharset also the value utf8).
  
  At this point - all the pages of the list appear correct when characters extracted base - which indicates that the headers are working. But - in phpmyadmin, the letters are truncated and jumbled return on forms of update (content management). I solved this problem by adding the & #xxxx; equivalent to insert and forms of update to display the text correctly on list pages-, but again, it is not practical to see all this in phpmyadmin, how I'd love to be able to read it such that she should be freed of the need to add & #xxxx references on the forms of the insert and update.
  
  Then... a bit of research, and I read that in order for international characters is displayed correctly in phpmyadmin, I had to modify my page php code so that all instances where I see the connection to the database, before queries SELECT, INSERT and DELETE, I have to add is mysql_set_charset ('utf8', $connection) or use the three lines of code that references mysql_query SET NAMES The VALUE OF THE GAME CHARACTERS and COLLATION_CONNECTION SET to utf8.
  
  I did, and he removed all my recordsets in the side menu! Not too good. I find myself with a task of rebuilding the pages now.
  
  So I put the mysql_set_charset line in the connection.php file in the folder connections DW below the connection it there instead. [I was not precede the mysql etc line by a sign $-I wonder if this is the problem?]
  
  With this change I could use the forms of Insert to add international characters directly into the database by phpmyadmin that everything was hunky dory. But then the problems arrived with the main list page first loads.
  
  So, I can now obtain international characters in the database (which is a step in the right direction for me), using a form on the site, but I still could not get international characters to display on the page returned when first loading for example on a list of jobs. Note that the detail pages display correctly when you click on the links of masters, and when I come back the details of the page back to the main list - the characters are ok. They do not seem to display when master page loading for the first time which is really perplexed me.
  
  I think I need to add the line below the $connection mysql_set_charset and before him selects, inserts etc. to all instances on the Web page, but this removes just the recordset in the menu, so appears not to be a good option.
  
  Can someone point me in the right direction as I was stuck on this for centuries. It can be something as simple as the addition of $ before the mysql_query, but there again perhaps not.
  
  I tried other forums - but people seem to be content of visualizes but not offering does not help. I do not think that what I'm doing here was did not before... all I want is for my pages to display international characters and that they display correctly in phpmyadmin so that when I insert, update, and delete records using Web Forms I don't have to resort to the use of & #xxx inserts.
  
  Help please!

  He solved. The question is to do with the preview of a file TMP page /, rather than a web page accessible through links on the navigation bar.

  In short clear them memory cache and preview for example a page to work with international characters in it on the first charge will present scrambled characters. This is because the page is a TMP file. Simply renames in the address bar to its file name appropriate will present the characters as it should.

  This can be double checked by loading to the top of the home page and access this page through the navigation bar - once again the characters appear very well, even on first use.

  So if you have the same problem, I got now you know... it's a simple solution, but unless you know, he'll save some hair pulling moments.

• Prevent adding unwanted tags from Dreamweaver

  I work with Dreamweaver CS4 for years, but only recently met a quite annoying quirk with the program. Every day, I'm updating a site where I need to manipulate different lines of code in an HTML file. I've noticed on several occasions that, without my knowledge, Dreamweaver will go rogue and insert random strings that can sometimes screw with updates on the page, once they are live on the server.

  For example, it was just brought to my attention recently that a few various tags have been added to a file, that I was working on that I got never intend to be there. They were a < p > < / p > at the top and then two lines down: < div style = "clear: both" > < / div > (repeated twice). ""

  Of course I never added these myself, so I wonder where they came within the program. This had to happen in a few errant click or button, which is problematic and I would eliminate this from happening in the future. Also, is there a way to lock these things to make sure that they haven't added randomly by mistake moving forward? I want to make sure only my changes that I hand make in the end saved HTML.

  Thanks for the info!

  Dreamweaver does not add the random bits of code in your files. You say "obviously" you do not add the code yourself. There is nothing obvious to this topic. You do something unusual to do this. The way to ensure that only your changes are uploaded to the remote server is to check the code carefully before you download. There is no way of locking files.

• BlackBerry Z10 adding HTML tags to emails are sent to those using OS Z10 - URGENT please

  BlackBerry z10, keep adding HTML tags to my e-mails, so receives it cannot read them.

  even more recently my POP email doesn't work at all on my phone, really bad experience with BlackBerry Z10 I miss my iPhone so much.

  I hope that the new updates will fix all these issues.

  If someone have a solution please notify

  Hey abualroob,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  We are aware of this problem and the current workaround is to use a SMTP server requires authentication user name and password.  You can get this information from your Internet service provider's SMTP server.

  Once you have the info, go to settings > accounts and click the e-mail account.  Scroll down the page until you find the user name of the SMTP server.  Placer place in the information requested and the SMTP server, and then tap Save.

  Test it by sending a new email message.

  Let me know if you have any other questions.

  See you soon.

• Tags works do not in the Dreamweaver-e-mail templates

  Greetings!

  I created a couple of different designs in Dreamweaver for use in a store Business Catalyst (BC), and everything works except the tags of BC...

  I try to use the {tag_unsubscribe} (tag_viewinbrowser} and {tag_recipientemail} in our email but the only thing that comes out are these characters in the text, not the functions that we had used in earlier campaigns by e-mail...)

  I don't see why they don't work. Can someone point me in the right direction?

  I see the slight confusion...

  Tags only work for the content of email campaign section.

  - http://screencast.com/t/d2TrLd26I (fashion design)

  - http://screencast.com/t/RaXfKaLhj (out of campaign e-mail)

  It seems that you want to add this in the form tell a friend who will not make the tags.  It is in fact a module that has no labels available in his presentation so I'm afraid that there is no work around.

  - http://screencast.com/t/2fflOMjNk

  So, to summarize: you will need to create a campaign and use the tags as required in the "" content"section to provide" only as it does not appear anywhere else in the system.

  Hope this helps to clarify this for you.

  -Sidney

• Adding new tags div for the placement of banner ads

  Hello

  I try to add new tags div for advertising banners to the left and to the right of the page inside my container and cannot find a way to position them. I modified a screenshot below to show where I want what they (they are just the layers in photoshop, I created). I have not create the page and I'm lost. Is it a matter of "splitting" the existing divs in the doc?

  I added a padding to create the space to the left, but I don't think it was the way to go...

  Thanks a ton for the help on this one!

  

  It is a model that you bought... you don't have the real layout yourself?

  There are a ton of nested

  It's in there, used for background images... I really have no idea why so much! I would use maybe some background images and called it good. In any case, now you will need to get around all those nested

  s.

  The area on the left is because of the 150 px of padding in

  .

  To make this available space, you need to delete this padding and use two floating elements instead of just the single item that is there now.

  I suggest you to test how the CSS box model works, as well as how to 'float' part. Then, you will be able to align two or more containers

  s side by side.

  http://www.w3schools.com/CSS/css_boxmodel.asp

  http://www.w3schools.com/CSS/css_float.asp

  You can have a better learning experience if you start off very simple... on a blank Web page, work in code view and place 4

  s, use the first

  Autour and contain the other 3. Then place these 3 side by side. Give each a width, height and a different background color so you can see where and how they line up when we. Play with it a bit until you understand how floats work... then to tackle your Web pages.

  Best wishes

  Adninjastrator

• Dreamweaver CS4 lack of Coldfusion Tags

  Tag Coldfusion for Dreamweaver CS4 library is incomplete.  < cfdiv >, < cfpod >, and other tags are missing. In addition, many ColdFusion functions are not in the "resources" tab.  Why is this?  Does anyone know where can I get a complete library of Coldfusion Tags?

  You should get the update from ColdFusion to Dreamweaver 8:

  http://www.Adobe.com/support/ColdFusion/downloads.html#cfdevtools

  Ken Ford
  Adobe Community Expert - Dreamweaver/ColdFusion
  Adobe Certified Expert - Dreamweaver CS3
  Adobe Certified Expert - ColdFusion 8
  Fordwebs, LLC
  http://www.fordwebs.com
  http://www.cfnoob.com

• To help Dreamweaver CC 2014.1.1, when I select a set of paragraphs to turn into a list of definitions and select Format - lists - definition lists, I get the tags &lt; dl &gt; but do not get the &lt; TD &gt; or &lt; dd &gt; tags?

  I've used before in earlier versions of DW and it worked fin.  I tried tonight with CC 2014.1.1 or view creation or in codeview with the same results.  I choose the < p > tag text start at the tag < /p > final and then in the menu choose Format - List - list of definitions and get only the < dl > tags.  All this experience?

  Thank you!

  This is how it works in CS6, too.  And it's not just for definition lists.  This is the result expected any list type that you use.   DW knows not where the DTs and DDs begin and end because you have highlighted an entire paragraph and asked DW format as a distribution list.

  I code my own definition of lists in general.  It is faster.

  Nancy O.

• Add a tag to when they fell into the Applications folder

  Hello

  I want to add tags to my applications for categorization when I drop them into the Applications folder. In my way of novice, I created a folder Automator action where I add Spotlight comments to the app, but that's not what I want to do, I want to label it. The only other option is aimed at Finder label but that gives you just seven color options. I want to have a promt asking me what tag I want to attribute to the request, exactly as it does for the Spotlight comment action. Is this possible with Automator or should I look elsewhere, like AppleScript?

  I have two solutions to bypass, where the first is a combination of Automator and Hazel (probably consume more memory) where I use the Spotlight comment action in Automator and then let Hazel tag of the file via a dynamic tag (comment Spotlight under 'other' element of choice). But it is almost useless, because if I just replace an existing file, the workflow is not triggered, in this case only if a new file is added. How can I make the workflow work on new and existing files? The same thing happens when I use the alternative workaround, I integrate Quicksilver in an Automator workflow to send the item (file) to Quicksilver if I where he can score. Any suggestion is welcome!

  Thanks in advance!

  With or without Automator, AppleScript script would be the way to go.  You'll have the same problem with actions folder be it, however, they are only triggered when a component is added to a watched folder.

  You can use the URL of cocoa class to add your tags - this topic of the mailing list has the script library routines (note that you can use directly in a script of El Capitan).

• ArraytoChannels error 'cannot be added because the channels of the target are not all the same length.

  Hello!

  After the end of my second day of test error, I put this question on the table:

  I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.

  I confirmed that:

  the RowData sizes and the ChannelNames are equal,

  both spend the isarray = true test,

  I change the order of the ChannelNames,.

  I have reconnected/disconnected from the oConnexion every time, nothing has changed.

  Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:

  oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")

  Call OpenSQLConnection
  Set oRecordset = CreateObject ("ADODB. Recordset')
  Call SelectWell
  Call GetWellStateIDs

  Data.Root.Clear
  for j = 0 to ubound(oTables,1)

  sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
  oRecordset.Open sSQLSting, oConnexion
  Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
  for i = 0 to orecordset. Fields.Count - 1
  oFieldNames (i) = orecordset. Fields.Item (i) .name
  next
  oArray = oRecordset.GetRows (-1, 0, oFieldNames)
  Set oGroup = Data .root .ChannelGroups .Add (oTables (j))

  oArray, oFieldNames arraytochannels
  oRecordset.close
  oConnection.Close
  next

  Sub GetWellStateIDs
  sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
  oRecordset.Open sSQLSting, oConnexion
  oArray = oRecordset.GetRows)
  WellStateIDFirst = oArray (0,0)
  WellStateIDLast = oArray (0, ubound(oArray,2))
  oRecordset.close
  EndSub

  Sub OpenSQLConnection
  Set WshNetwork = CreateObject
  oComputerName = WshNetwork.ComputerName
  oDB = "MX2. Player.DB ".
  Set oConnexion = CreateObject ("ADODB. Connection")
  oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
  oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
  oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
  oProvider = oProvider & oDB
  oConnection.ConnectionString = oProvider
  oConnection.Open
  EndSub

  Another clue. If you check using DIAdem

  Microsoft Windows Script Debugger

  you are able to install the debugger in DIAdem.

  It would potentially have shown that the command does not work as expected.

  Sorry for the inconveniance

  Andreas

• Xbox Music does not see the albums recently added to the library

  There are two problems here.

  first of all, I have 43 albums in my collection, stored locally. I disable the synchronization of clouds and Pass music downloads so all I see are the titles stored in my music library. I added more than 12 albums but the app does not.

  In desktop mode when the music library is organized by the record, I can see the albums that I've recently added. When I change reorganize it by album, I do not see the recently added albums. ID3 tags are blank.

  It seems that the index is never updated when you use the method of editing an SD card. It did not matter if the mounting location was at the root or in C:\Users\...  I had to manually rebuild the index of any time, I wanted the libraries up-to-date. However, I found another method that seems to work. The following you web site shows how to set up points of junction which connect the files on an SD card with virtual locations on drive C:. The end result is almost identical and indexing seems to stay up to date in real time.

  http://www.Engadget.com/2012/11/01/junction-points-and-Windows-8/

• Chips not aligning the text in Dreamweaver CS5

  I am currently taking a web development class so it's a really basic part of things like the class just started, but for some reason when I align the text on the Center with the bullets, it looks fine in Dreamweaver, and then once I have watch in Chrome the bullets are off to the far left. Any ideas?

  This is an excellent example of the "differences between browsers.

  Chrome "just that" when you ball a focused list.

  Some browsers interpret things a little differently than others. In general, that is to say the culprit to do something unexpected, but other browsers have their things too.

  Chrome wants you to use list-style-position: inside on css of the tag

  to get them to the wire.