Drive hard bad - WHY DO IF I need TO PURCHASE Windows 7 NEW!

Similar Questions

• New drive hard "Seagate ST2000DM001' has not detected by my computer, Windows 7

  Original title: missing HARD drive

  I added a ST2000DM001 Seagate 2 TB drive to my computer.  It appears in the Device Manager and BIOS.  It appears as "Disk 1" in computer Mgnt, but the volume is not displayed.  The drive does not appear in my computer.

  I can not format or assign a letter to the secondary drive.
  I updated the Firmware of the drive HARD w / Barracuda-ALL - GRCC4CD.exe.
  What should I do to access the 2 TB drive?
  System Specs:
  Windows 7 ultimate (64 bit)
  MSI x 58 Platinum SLI w / BIOS v. 3.9 (2011-01-28)
  Intel Core i7 920 @ 2.67GHz
  6 GB OF RAM
  Disk 0 - ST3160023A-RK Seagate 150 GB (Ultra ATA/100 w / SATA Adapter)
  Disc 1 - Seagate 2 TB ST2000DM001

  Hello

  Have you made changes on the computer before this problem?

  I suggest you follow the methods and check them off below if it helps.

  Method 1:

  Try the troubleshooting hardware and devices running tool and check.
  Reference: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:

  Check your hard drive for errors:
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
   
  Note: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  
  Method 3:
  
  Initialize the disk in disk management.

  Create and format a hard disk partition : http://windows.microsoft.com/en-US/windows7/Create-and-format-a-hard-disk-partition

  Note: Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Method 4:

  Try to connect with another computer and check if it helps.

  If the problem is still persist, then it would be best to contact Seagate for further assistance.

  Seagate Support: http://www.seagate.com/www/en-us/support/

  Hope the information is useful.

• Hard drive controller is released on the PC need help with setting up new controller

  I have a HP with a built NVidia controller on the mobo.  The controller was an error and I am installing an Adaptec 2120SA on the system controller.  The computer sees the controller and it tries to start the operating system but has problems it BlueScreens and it blue screens quickly so I do not see the error code.  but I think it's because I don't have the drivers of the controller installed in the operating system.  I really don't want to reload the workstation.  Is it possible to install the drivers of the controller without starting the operating system I tried three other PC and they all have the same questions. as the driver for the controller is not there.  The OS is Vista Home Premium 64-bit.  The PC is no longer under warranty and a replacement MoBo is too much money.

  Thanks in advance for your help.

  Hi arjaywolverine,

  There is a way that can be attempted to identify the problem and we'll see if it helps.
  You need to extract the driver file from hard drive controller on a floppy/flash your motherboard CD drive, and then you restart the computer with the Windows Vista operating system DVD.

  1. turn on your computer and insert the CD or the DVD of Windows Vista.
  2. on the page install Windows, do not click on install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  3. click load drivers and it prompts you to insert your floppy disk or USB key.
  4. navigate to the correct device and click Ok.

  Once the drivers are installed correctly, remove the DVD and diskette. Restart the computer and who should do it.

  Hope this information is useful.
  Karena R - Microsoft Support
  --------------------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I have Mac Book Pro 2010 hard drive, I use 500 GB drive hard but now is broken, I need to change somewhat, but I would like to know if is--that I can upgrade to 750 GB or 1 TB

  Can I upgrade Mac Book Pro 2010 Hard Drive 500 GB 750 GB or 1 TB

  Yes, no matter what 2.5 "SATA HDD or SSD form factor will be compatible.  The largest currently available capacity is 2 TB.

  Ciao.

• M7-j010dx: need help w/Windows 8 new hard drive recovery

  installed a new hard drive installed (hard drive error (3f0) an old and dead confirmed by Geek Squad). I have HP recovery discs. How to proceed from here?  Tried the road "equip App and driver recovery disk and turn on. found no go and same "Boot device. Please install the operating system on your hard drive.  hard drive error (3f0). "appears.

  Is there more to the process than that? I don't get what is happening.

  Thanks in advance...

  Something that has worked for many (not all) Windows 8 laptops_enter BIOS and change the date to 01/01/2014. Save & Exit and restart again recovery disc. They pass through the process_but - on the first restart that launches Recovery enter BIOS to verify the date is still 01/01/2014. If so go back to reset. If not change again once and then resume.

• How can I erase the drive hard so that I can sell my HP Pavillion/Windows XP/3 GB ram/512 MB hard drive?

  I need help wiping my hard drive, so I can sell my computer

  Hello

  You can use the process below to completely erase your hard drive, but you must have your game that recovery disks to reinstall the operating system if you want to sell it with XP installed.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://software.lsoft.net/KillDiskSuiteFree-Setup.exe of

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into yout laptop. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard drive, Select (80 h) and press f10 (you will also need to type a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD of Killdisk, insert your first HP recovery disc and restart the computer to start the installation.

  Kind regards

  DP - K

• PC PORTABLE from HP 2000 369WM: need to upgrade window 10 new pilots

  Hello everyone I have recently updated my laptop to HP 2000 369 WM 10 (64-bit) Windows, 4GB and now I need new drivers and I'm not sure where to find drivers spin an APU AMD E-450 with graphics Radeon (TM) HD

  PILOT

  AMD SMBus

  AMD SATA controller

  Realtek PCIE card reader

  Raltik RT5390 802.11b/g/n WIFI adapt

  I appreciate the help that I can ge, thanks a lot

  Jean

  You are the very welcome.

  The list of supported laptops may not matter as much as the list of compatible wireless cards... Please read the list below...

  SUPPORTED DEVICES:
  802.11n wireless PCI Express Card LAN Adapter
  MediaTek MT7630E 802.11bgn Wi - Fi adapter
  RALink RT3090 WiFi 802.11b/g/n adapt
  Wi - Fi 802.11b/g/n Ralink RT3290 adapter
  WiFi 802.11a/b/g/n Ralink RT3592 adapter
  RALink WiFi 802.11b/g/n RT5390 adapt
  RALink WiFi 802.11b/g/n RT5390R adapt
  
  -Provides the initial version of Windows 10 support WHQL driver.

• HARD drive failure, I would like to know how to get Windows 7 return on it.

  Hello everyone, I had a HARD drive problem lately, but before moving on to describe my problem, here are the specifications of my laptop:

  HP Pavilion dv6 - 3264-ca

  AMD Dual-Core 2.2 Ghz processor

  6 GB OF RAM

  128 MB ATI graphics card

  750 GB Toshiba HDD

  Windows 7 64 bit

  The question:

  Recently, I had a HARD drive failure very unhappy. The recovery partition is not even load. I tried to boot my laptop with Linux with the HARD drive always attached, and it would not read. I pulled the HARD drive and placed in a box drive HARD and he would not yet be supported on Windows XP or Vista or 7. However, it would read in Windows Device Manager as well as in the BIOS.

  I need to extract some data priority there so I managed to recover all my data safe with a data recovery service, but now the drive is rendered useless. I was told a low-level format might be able to help him to be usable again, and if that were to happen, would then disappear the recovery partition in the process.

  In addition, I would like to install Windows 7 64 bit on the disk, but the box your laptop came with an installation CD, which is quite frustrating. Is he that sort of HP can let me download Windows 7 through any warranty service?

  I have a one year warranty on my laptop.

  In closing, I would like to know if I can get back Windows 7 on my HARD drive for free, or if I have to go to buy new Windows 7.

  All the tips of your kind people?

  Hello

  Here are two options.

  1. if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64 bit it is the version of exact details you need.

  If you do not access to the retail drives, you can create an installation disk yourself - just download good picture disc from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD.

  http://www.mydigitallife.info/Download-Windows-7-ISO-official-32-bit-and-64-bit-direct-download-link...

  Use the disk to perform the installation, enter the activation key is located on the underside of your laptop when asked and once installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM Windows installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need can be found here.

  ----------------------------------------------------------------------------------------------------------------------------

  2 you can order a set of replacement recovery disks using the link below - these costs about $30 if you live in the United States.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

  

• the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

  the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

  You n "t do it this way.

  You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

  If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal
  Casper
  Norton Ghost

  The process is simple:

  1. Install the software on your laptop for cloning
  2. RTFM (do not skip this step)
  3. Install the new drive in the external case
  4. Connect new player to the computer
  5. Clone original disc on new drive
  6. Stop
  7. Unplug the external computer case
  8. Exchange records (original for external disk) and the new laptop drive
  9. Reboot and enjoy your new drive.

  When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

• I want to reinstall Windows 7 Home Premium so that I can format my drive hard as free space automatically reduced.

  I want to format my drive hard as free space automatically reduced. I have windows 7 Home premium authentic (built with my acer aspire 5742)

  Original title: relocation

  The recovery 'hidden' Acer Partition should be left intact.

  But you do not what you should have done when you bought your Acer machine; know-how in case of hard drive failure recovery disks.

  Here is how to do this with an Acer:

  "How can I create a set of the backup recovery disks?

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  Your Acer computer includes Acer eRecovery Management software that allows you to perform operations of restore directly from your drive hard disc , which allows a faster recovery process and no need for discs. Acer eRecovery Management does, however, allow you to create recovery discs. The recovery disks will allow you to restore your computer something happened to your hard hard disk .

  Note: According to Acer computer you have your Acer eRecovery Management version may be slightly different, but the ability to create your discs will be available.

  To create your recovery discs backup follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.

     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.

  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

  The other option available is to create drivers and Applications Disc. You can use this to create a backup disk to install specific drivers without destroying the entire operating system and applications.

  To create a drivers and Applications disc, follow the steps below:

  1. Click create disk drivers and Applications.
  2. On the page create drivers and Applications disc select the drive you want to use for burning the recovery media, and then click Start.
  3. Whenever it has finished burning, the disc is ejected.

  Note: If the computer does not have an internal optical drive, an external optical drive will create a set of Acer Recovery media.

  See you soon.

• drive hard dv1375EA (Pavilion DV1000 series): IDE or SATA?

  Hello

  Could anyone who has accurate knowledge let me know DV1375EA has a drive hard IDE or SATA, so I need to get a replacement (not not jumped the laptop cover again, so to speak). I think it's IDE, but I assure you.

  Thank you!

  It is the IDE.

  I hope this helps.

  Pete

• Drive hard Canon VIXIA HG10 camcorder 10 x

  No driver available for Canon VIXIA HG10 10 x drive hard camcorder on two versions of Windows 7 (32-bit or 64-bit).

  Hi Tim,.

  Are you facing problems related to your Canon VIXIA HG10 10 x drive hard camcorder?

  This product is compatible with Windows 7 and installs all the drivers automatically, without additional software.

  http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Canon%20VIXIA%20HG10%2010x%20Hard%20Disk%20Drive%20Camcorder&v=Canon&uid=2183B001&l=en-US&pf=0&pi=0&s=VIXIA%20HG10&os=64-bit
   

• drive hard short DST has failed-need new computer help

  HP Pavilion m6

  64-bit Windows

  Failure, ID-mOKS6f 667 - 65 L-XD7X1G-60V603

  Drive hard short DST failed when I did the start of F1 tests...

  This computer less then 3 weeks... need to get this working again... that are the options I have?

  Brand new out of the box, bought from Best Buy - end of June.

  No changes have been made, was online: attempt to use Google Voice, could not scream... everything froze, did a re-startup-no hard other choice-error on the screen came after I did the test...

  Intend to do more tests to see what else is bad. The HD has really missed on a new computer - it's horrible if true. Need another one as soon a possible.

  Hello

  I try to contact HP in the United States and see if they can help.

  Kind regards

  DP - K

• Have PC, hard drive, is gone wrong, need to reload Windows XP Home edition, have CD, but have the product key on PC that he had instructed. Is there a way I can download it again?

  I have a PC Emachine that I bought with Windows XP Home Edition loaded on it, hard drive went bad and had to be replaced, I don't have a CD to reload my Windows, still have the product key sticker on the PC to save it. Is there a way I can download it? I have XP Pro on another PC, thought I could load and use the product key for my original PC, but who doesn't. Any ideas on what I can do

  Borrow an OEM Windows CD (it must be OEM) and install it using your product key. (You can make a copy of it for your future use - this isn't the CD you pay because it's the product key). A generic OEM CD maybe not some or all the drivers you need you would be safe to download from the website of the provider first.

  If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

• the hard drive has been replaced in the Tower from my computer and now I need re - install windows vista but have no disk

  hard drive went bad in my computer hp and was replaced, I can't find the disk came with it or restore disks, I'm not sure I ever had any, is a model of Tower not laptop I need to know if there is a way to download a copy for my computer on a drive of my laptop or what should I do?

  Hello

  There is no download available on the Net and your hard drive as failed now, you are unable to make the recovery of the disks.

  And you cannot use from recovery disks of a different brand or model (laptop) to reinstall Vista on your Tower / Desktop

  Contact HP and ask them to send you a set of recovery disks.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.