New drive hard "Seagate ST2000DM001' has not detected by my computer, Windows 7

Similar Questions

• drive hard Seagate usm is not recognized by the computer.

  Windows 8 does not recognize my portable hard drive Seagate USM when I insert into the computer Bay USM.  The computer is a new Lenovo K450 Windows 8.

  Thanks Ronnie,.

  I contacted Lenovo on the K450 and they said that their computer would only recognize drives of 500 GB USM and mine are 1 TB.  I asked if he would support the discs from 1 to 2 to in the future and they said that it is not in their plans.  Meanwhile, my Seagate drives will connect via cable USB3 Lenove USB3 ports.

  Ken

  I have a K450 and thought the slot of USM was in not recognizing my Seagate Backup more 1 TB drive as well.  Then I found another similar post elsewhere and the solution is to enter the upper part of the computer and push harder!  It feels as if it was there when it really is not completely.  My 1 TB works fine now.  No idea why someone said there is a limit of 500GB.

• Drive hard internal suddenly does not detect.

  I have PC HCL, I have a hard drive 350GB WD blue, suddenly he is hanged and claimed restart. I tried to start it, but during the installation of time, he does not watch partition and it shows the total space (i.e., 300 + GB). then I tried to partition, but it does not work. After that I tried, this time, it is not all display drive and says there is no disc to install windows. How can I detect the hard drive and how to recover my data in the hard disk and how can use it again to install the inside windows. Please help me to do all this. at least suggest me to get my data to retrieve.

  Hi @PrincipalGovt. ITI!

  I'm sorry to hear what happened with the HARD drive, I know that this could be a very unpleasant experience.

  At this stage, given that the boot drive is still not detected, it will be better to try the troubleshooting steps basis in such situations.

  1. use another SATA cable, as the problem could be linked to this component.
  2. connect the hard drive to another motherboard SATA port.
  3. in the event that none of the above worked, then connect the HARD drive to another PC and see if it will be recognized.

  If all goes well, it will appear in the other computer and when he does then backup your most important data on another location. It is possible that the transfer rate may be slow, but nonetheless wait for the process to complete if your information could be sure. Once it is successfully removed, run a diagnostic test on the HARD drive with the manufacturer Data Lifeguard DIagnostics tool and see what results. You can download here:

  http://products.wdc.com/support/kb.ashx?ID=BKO7r8

  In the case where you've run these tests until you can follow the steps described in this article:

  http://products.wdc.com/support/kb.ashx?ID=noYuE0

  However, in case the HARD disk is not detected at all, then it will be preferable to a data recovery specialist and see if he or she will be able to help you recover your data back. There are a few partners listed on the official site data recovery, so you can take a look at this link if you want to:

  http://products.wdc.com/support/kb.ashx?ID=HpehiA

  Hope this helps and let me know how it went.

• new drive HARD Seagate Barracuda not recognized in the BIOS

  Hello

  The Inspiron 530 desktop computer BIOS does not recognize my new HARD drive. It's a Seagate Barracuda 500 GB (ST3500413AS). I try to reinstall Vista, but installation can't find a drive with 3.9 GB. Wrong type of drive in the BIOS found, I think that.

  Tried several things, but no results: check the BIOS, but with automatic selection drive only to find a 4 GB (wrong type), updated the BIOS drive (now 1.0.18), tried several drivers with startup etc.

  Think I need a good driver, but on the site Web of Seagate, they say that there is no firmware for this drive.

  can someone help me?

  THX, David

  Thanks for all the support.

  It wasn't a problem with the SATA 3 or something like that, but the HARD drive was missing. There is no other choice. Come back with my HARD drive (and information) to the store and finally got a new. I hope that the other works :)

  THX and greetings

• HP Envy 5640: my new printer is connected wireless but not detected by the computer

  I installed a new printer, but when you try to print, it records in PDF format instead of print. The wireless connection is good and shows the printer as the default printer.  How can I change the settings of the recording to printing?

  You are welcome.

  To enable connected HP support options, click the devices tab.  Touch the icon and enable webservices. If you have already activated webservices, touch "Print information Page."  Claimcode of the printer to add the connected HP printer. Or, if you want, call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I'm sure that the printer you see so-called 'Network' would be wireless. Make the default and try a test print.  If this fails, try the other being default and do another test.  Once remove you the one that is active, right-click on the printer late heading and delete it.  Worst case if that happens again call short number above.

  Have a great weekend,

• E3000 can support 4 TB drive hard seagate ST4000DM000

  Hello, I got a new drive hard seagate 4 TB ST4000DM000.

  I try to use it on my Ver.1.0.04 E3000 (version 6) thanks to a hard disk USB 3.0 enclosure, but it failed.

  The router nothing posted on the webpage of storage, the pilot are not not in the table of USB storage device.

  so I formatted the drive on my laptop windows 7, of course with TPG and a single partition.

  It is OK on my laptop now, but can still be found by the router.

  Can Linksys pass the E3000, so the router firmware takes in charge the TPG and the new 4 TB harddrive?

  The HARD drive may be too advanced for the E3000. The USB function on this unit has been tested to work only with the 1.5 TB. Here is the complete list of the tested on an E3000 USB devices. An update of the firmware is not likely to be released, either to improve the function of the DEVICE.

  It would probably be best to upgrade your router. Check out EA6300. This last router is equipped with a USB 3.0 port, ideal for your HARD drive.

• CD/DVD drive not detected on the computer... Dell said to reinstall Vista

  I have a Vostro 1500 running Vista Basic. My CD/DVD not detected on my computer drive. I looked in Device Manager and there is a yellow alert. When I look at the properties of my drive, there is an error "this device cannot start. (Code 10) ». I ran the PSA and all tests passed. I wasn't able to install an updated driver because the device is not detected on my computer. It is listed in the BIOS.
  I called Dell support week last to try to understand the problem. After about 2 hours of doing the things I had already done including the installation of new drivers (drivers installed not because the system does not detect the drive), they decided to send me a new CD drive. I received it this morning and it's another brand than what I had before, but I don't think it's a problem. The new drive I received today does not work either. It has the same problem as the original drive. I contacted Dell support online today and after explaining my situation together again (what is the use for a no of cases when I explain the problem 5 times in any case?) is first sent to a Microsoft for Windows XP KB (I use Vista so it's of no use at all) and then told that my registry is corrupt and I need to reinstall Windows. I don't buy it, but I told the tech that I was willing to humor. So, here am I, there is no information on the Microsoft support site I can find related to this specific error code. There are a lot of XP, but like I said, it's of no use to me using Vista.  My patience is wearing very thin with this situation and Dell.
  Someone has any suggestions, advice or anything before I chuck the stupid thing out the window? =)

  
  

• I have a problem with the external hard drive not detected on the computer as a disk.

  I connected an external hard drive toshiba via USB on this victory 8 x 64 computer that is also a toshiba and the computer doesn't show as a reader in fact it shows that he as a device so what gives. This thing have not even a letter such as C: (what internal hard drive) I watch the little arrow to show you, it is prudent to remove it so it appears here, what does I have a drive bad ext or what? Oh yes, I have tried all my ports even

  Hello

  I suggest you to assign a drive letter for the external hard drive and see if it helps.

  To do:

  a. press the Windows key + R and type diskmgmt.msc.

  (b) if the hard drive recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.

  c. right click paths and the drive letter Change.

  Do one of the following:

  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use and then click onOK.

  ·         To change a drive letter, click change, click on assign the following drive letter, click the letter you want to use and then click on OK.

  d. restart the computer and check.

  Hope that the external hard drive will not be detected after that.

  Please report if you encounter any problems related to Windows and we will be happy to help you.

• How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  How to import bookmarks Firefox to a hard drive in another PC Firefox browser? The hard drive containing the bookmark has been deleted from a computer whose mother is dead, but the hard drive can be recognized outside on the new computer.

  See this support article:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

• I have vista 32-bit, he sees not my new drive hard hitachi, in device manager it shows that it works correctly?

  Why my expoler does not see my new drive hard when it is in the device as o.k. Manager.

  Look for the drive in computer management, it may need to assign a drive letter.

  Change, add, or remove a drive letter
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

• THE ATTENTION! Has not detected one or more drives during POST

  I have a desktop T7400.

  during post, I get this error:

  "WARNING!" Has not detected one or more drives during POST

  Press F1 to continue... »

  I press F1 and it starts up fine, but I have to stop this message from appearing every time that I turn it on.

  I have 1 CD-ROM and 2 sata hardrives on the system.

  I need help please.

  Thank you

  Disable the option 1 SATA in the bios and save the settings. There is nothing connected to the sata port 1.

• Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13. Today a msg says: "Windows did not find antivirus software on this computer. What should I do?

  Tech installed the new drive hard yest. I had McAfee virus exp 31/10/13.  Today a mesg says: "Windows did not find antivirus software on this computer.

  What should do?

  Download another copy of McAfee and activate it with your existing license.

  Ask for advice here: http://service.mcafee.com/Default.aspx

• New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

  New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC
  
  Can not install Win XP on another hard drive
  
  I work with a...
  HP Compaq 8000 Elite Small Form Factor PC
  
  Original SATA HDD is loaded with Windows 7 Pro.
  
  In order to install a program using this PC as a digital video recorder
  I installed the video capture PCI card and related software. I had problems
  associated with software and Windows 7.
  
  I know that the software works with Windows XP.
  Do not want to remove the original HDD, I tried my win7
  to replace the HARD drive and do a clean install of XP.
  
  I get the same error during the installation of the OS.  I tried different
  SATA and different XP install disks.
  
  The error I get is shown in this photo.

  

  Original HP HARD drive is a Hitachi 160 GB
  
  I tried 2 known to be good SATA drives.
  Seagate 500GB
  WD 80 GB
  
  I checked the bios settings and even revenue tio rear BIOS
  default settings.

  I get this error even with everything I tried to do.

  This happens during the OS install just after or during the process of the installation of temporary files are current

  written to the HD.
  
  When I re - install the original HD loaded with Win7, everything works as it
  expected.
  
  Any ideas on what] s going on here?

  Hello:

  The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

  Has Windows 7 and XP is too old an operating system to make them.

  Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

  The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

  Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

• I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available.

  I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory?  Its not partitioned to another eather drive

  original title: hard drive problems

  (1) what does your BIOS the drive size?

  ============================================================

  2) disk hard test - find your make and model:
  Speccy - computer/system information in detail
  (More detailed look at your memory and CPU)
  OS, CPU, RAM, card, graphics, hard drive, optical drive
  Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - CD Bootable:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ================================================================

  (3) HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  -Partition management utilities-

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• HELP-Compaq Presario CQ70 - new drive hard = Nothing

  Hi all, computer dummy here and I need help.

  the Seagate Momentus 250 gb 5,400 RPM hard drive failed completely on my Compaq Presario CQ70.

  I bought a new Seagate Momentus 500 gb 7,200 RPM.

  I had Windows Vista installed on my laptop.

  but when I'm the new hard drive, I tried to install Windows XP (that I don't have a Vista disc).

  in any case, I inserted the new drive hard and drive XP OS then - NOTHING.

  just black screen and after a while, blue screen saying windows has been closed.

  When I go into the BIOS I do not see the hard drive and everything, but I can run a hard drive test and it passes.

  I have removed and reinserted the hard drive and run the XP OS several times but still the same.

  did anyone can help this old man so I can get my laptop up and working again.

  Recognizing.

  Andrew

  Hello again, Paul and once again thank you.

  I have a Windows Home Premium OEM installation disc.

  I wanted to wait get your response re Home Premium before I considered a set of recovery discs using the info you provided :-)

  I'll try to install Home Premium if that does not work then I get a set of recovery disks.

  Kind regards

  Andrew