drive hard printer - I inserted the disc to install the printer software, but my PC cannot read

Similar Questions

• Try to install the printer software, but it says cannot find Serscan.sys

  I'm trying to get an HP printer to work.  The software will not end because it cannot fine Serscan.sys.  As far as I know all my service modules are underway.  How can I get Serscan installed?

  I have no more drive.  I'm sol?

  I'm not clear on the problem now. If you can find Drivers.cab in the c:\Windows\Driver Cache\i386 folder, then you should be able to look inside the it with something like WinZip or WinRAR and extract the SerScan.sys file on a location that can reach the installation of HP.

  By the articles in the Microsoft Knowledge Base, I know that there are two legitimate versions of SerScan.sys, one for XP SP2 (ver. 5.1.2600.3029) and the other for XP SP3 (ver. 5.1.2600.5612). You need the right version for your own XP, so getting the Drivers.cab file on your own machine is the best method.

• I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my order

  I have Abobe CS2 I bought and legally own. I have an old MacBook Pro who had to have the hard drive replaced. I reinstalled the CS2 software and I can't activated with an authorization code. I need the code to use my software. I can't afford a monthly payment with Adobe Cloud. How can I get my software activated so I can use it? Thank you.

  Please follow the steps described in this document - error: "Activation Server unavailable". CS2, Acrobat 7, pass a hearing 3

  Thank you

  Bev

• DVD/CD drive is not visible in the Device Manager, but it works.

  Original title: My dvd/cd drive is not visible in the Device Manager but

  This works because I have jst begin with him. I can hear the disc running, but nothing ever comes and when I go to computer its not visible there either.

  Hello

  See the methods listed in the article mentioned below.

  My drive does not appear in Windows Explorer

  http://support.Microsoft.com/kb/330140

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 how to back up and restore the registry in Windows.

  See this link to view the hidden devices:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  I hope this helps!

• I install Windows xp sp2 and insert the product key but it says it failed.

  Hi, this is Rohit.I have a big problem I have buy windows xp sp3, and after 6 months or more my o/s computer corrupted, then I install Windows xp sp2 and insert the product key but it says that it is fail... So please tell me what I can do... Please tell me or send email to * address email is removed from the privacy *

  Number of keys that came with XP SP3 licenses can be installed on systems of SP3 - MS loose a new set of keys with SP3.

  You must use the appropriate SP3 provided with your key media.

• I use the SAGE software but can't view or print all reports since the upgrade to Windows 7

  I use the SAGE software but can't view or print all reports since the upgrade my laptop to windows 7.

  Is there something in windows 7 that is in conflict with SAGE software and if so is there a download available that will fix it

  It is common for accounting packages to must be run as an administrator (essentially because the companies are too lazy to properly program).

  Try first - then approach wise for assistance.

• my hard drive crashed and I am trying to re - install acrobat pro XI but I get an incorrect serial number

  my hard drive crashed and I am trying to re - install acrobat pro XI but I get an incorrect serial number

  Hi dalw30232244 ,

  Please refer to this article:- error: "serial number is not valid for this product". Adobe Creative Suite

  Let me know how it goes.

  Kind regards

  Christian

• I have hp elitebook 8440p, I inserted the sim card, but I'm not able to see where to configure the sim card

  Hi I have a hp elitebook 8440p but I did not; KWN how to use sim card option, I inserted the sim card, but now I can't see wher to configure the sim card or use, cos I m unable to see any option, so please help me

  Hello

  The HP EliteBook User guide contains information on what is required to configure the module top mobile broadband in your mobile workstation. Go to the HP Web site for more information about the configuration and activation of the SIM card.

• I am installing a photography software, but I got a message error that says "windows version Basic 3.0.0.0must be installed in the Global Assembly Cache first".

  Error windows version Basic 3.0.0.0must be first installed in the Global Assembly Cache

  I am installing a photography software, but I got a message error that says "windows version Basic 3.0.0.0must be installed in the Global Assembly Cache first". Help someone!

  Try to download and install the .NET Framework directly from Microsoft.  If you have already installed a version and get unsuccessfully with the update - you may want to uninstall the installed versions and the installation later.

• I bought a camera Leica with the Lightroom software, but after I downloaded it, it is only a trial version with the numbered days. What should I do?

  I bought a camera Leica with the Lightroom software, but after I downloaded it, it is only a trial version with the numbered days. What should I do?

  Sam h. l.c52679592 wrote:

  Thanks for you advice. I clicked on the link you gave me, but somehow it gives me just a skin. I'm back to the same trial version, this time with a day less to use.

  You must download it from the website of Leica. See the links in my post above.

  If you did that?

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra

• Get "there is no disk in the drive has it please don't insert a diskette into the drive device drive hard/dr3/dr4 etc etc" error after installing the Bitdefender program.

  There is no disc in the drive please insert a disk into the drive device drive hard/dr3/dr4 etc etc.

  Original title: coordinator.exe no disc

  I got this message after installing BitDefender antivirus.
  It turned out to be partly because of WinPatrol - who had not been uninstalled.
  And the program uninstal delete his entry autostart nor its program file.
  Which has supported, manually, the end of the message...
  But I guess that's not specific to WinPatrol, which is an excellent monitor if it is not in conflict with the antivirus.  (It worked well alongside Avast.)

• CD DVD drive does not recognize inserted the disc: Code 19

  Windows cannot start the CD-ROM/DVD-ROM device because its information configuration (in the registry) is incomplete or damaged (Code 19). The CD-ROM/DVD-ROM device is a: HL-DT-ST DVD - RAM GH40L ATA Device on an HP Pavilion Slimline

  Hello

  Here are a few articles that will probably solve your problem.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Your CD or DVD drive cannot read or write media - A Mr Fixit

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Mark <> Microsoft Partner

• How can I do to repair Windows Vista if I don't have a disk drive & asks me to insert the Windows disk and select Repair.

  I have a netbook with no disk drive that is running Windows Vista.  When I try to turn it on, it tells me that a file is missing or damaged and that I have to install my Windows disk and select repair.  Seeing that I don't have a hard drive on my computer, How can I do to repair vista windows?

  Hello

  Netbooks have the option to reinstall the operating system to when it was new.

  They have a recovery Partition on their hard drives the same as most laptops and desktops...

  You should ask the Netbook Manufactuter for particular key sequence to begin a recovery.

  Some manufacturer's instructions are to press F10 or F11 at startup; others are Alt + F10, etc..

  The installed software doesn't have knowledge written in programming to realize that you have a Netbook and you are unable to insert the disc. That's the way it is written, unfortunately: one size.

  And some more expensive Netbooks now have a DVD player.

  See you soon.

• Any transfer on a drive hard new - what is the best way?

  Here's a question simple and straightforward, I hope. I currently have two internal hard drives:

  • C (IDE): OS (Win7), programs
  • F (about three times larger than C, faster, SATA): for most of the multimedia stuff

  (And some external and a dvd burner, which should not be relevant to this question.)

  I ordered a new hard drive, which will take over old job of the F drive. Once I have install and F empty on it, I want to move everything that is currently on C for which is now F and the new C drive I start and run Windows from. (C would also get a new drive letter and would only be used for backup purposes).

  I much prefer this without having to reinstall Windows and all my other programs, and without investing in expensive software of type Ghost I would probably use only once every two years or more. I also prefer not to have to partition F, although I'll do it if necessary.

  What is the best way to do it?

  Windows 7 image and move it to the new hard drive

  The only way to avoid reinstalling programs is in the image of the player. Connect the new drive as a slave (if IDE), then partition the new drive, so it has two partitions (or more if you want) - the last partition being slightly larger, then the amount of data on your current hard drive. Also, make sure that the partition you are moving that Windows 7 is greater, then the current partition is.

  Make now a picture of your current hard drive with either programs below and save it to the last partition on your new drive. If you have the recovery of 100MB partition do not forget to include that. Then restore the image of the partition that you want Windows 7 installed-you put in place the same as long as your current drive, and you may need to remove/change the partitions that you have done.

  Both programs are offered free of charge:

  Reflect disk imaging:
  http://www.Macrium.com/reflectfree.asp

  Paragon Backup & Recovery Free Edition:
  http://www.Paragon-Software.com/home/DB-Express/download.html

  Remove the old hard drive and see if a new start, if it is not:

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Space - increase free hard drive space

  Before taking the free picture of space hard drive if you want.
  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "system properties? window, click the tab "System Protection".
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the slider to the left to reduce the amount of disk space, that System Protection can use.
  7. click "Apply" and then the "OK" button after setting the disk space.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses