Drive hard question Dell Dimension 4400 level please.

Similar Questions

• How can I add an extra internal hard drive to my dell dimension 8300

  I installed an extra internal hard drive to my dell dimension 8300. He only appears in "Device Manager" and shows to work but he does not appear in 'my computer' and has not assigned a drive letter. It's a western digital 1200js-22mhbo. My drive root 'C' is also a wd1200jd from western digital. Can someone tell me what I do to get it to show up with a drive letter, and I have to format it? Also, there is a way to format so I can install programs on it as my "C" drive or I just will be only able to use it as extra storage? Thanks a lot for your help!

  Bobby

  Hello

  • Click Start
  • Click on run
  • Type diskmgmt.msc and press enter
  • You will be prompted to initialize your new drive, move (drag) the message on one side, so that you can see the disk management window in its entirety and make sure your new drive is the disk that should initialize
  • Click on the button next wizard
  • Make sure that your new hard drive is selected (boot disks), and then click the next button
  • Make sure that your new hard drive is not selected (the disks to be converted), and then click the next button
  • Click on the Finish button
  • In disk management, right-click the unallocated space on your new drive and then click New Partition...
  • Make sure that the primary partition is selected and click on the next button
  • Leave the default partition size (all your new drive), and then click the next button
  • If you do not want the suggested default change drive you want allocated letter and click the next button
  • Change the volume name if you want but leave the rest of the information as the default and click the next button
  • Click on finish

  Disk management will make formatting your hard drive and displays its progress in percentage. When it's over your disk will be ready to use.

  If you want to install programs on this disc you could make custom installations and select : \Program Files instead of the default of C:\Program Files. Some installers do not have this option.

  You can move your documents on this disc folder, if you want to see...

  http://support.Microsoft.com/kb/310147

  .. .but make a backup first.

  Tricky

• which chipset driver do I need for a dell dimension 4400 pentium 4

  which chipset driver do I need for a dell dimension 4400 pentium 4

  Go to Dell support and enter your Number of Dell Service.

  That's probably the one--> http://tinyurl.com/3o8v73b

• A motherboard that fits a Dell Dimension 4400

  Hi I'm looking to upgrade my dell dimension 4400 and I wonder if there is a motherboard that fits this case and support a drive sata hard and between 4 GB to 8 GB of ram

  gators36

  Hi I'm looking to upgrade my dell dimension 4400 and I wonder if there is a motherboard that fits this case and support a drive sata hard and between 4 GB to 8 GB of ram

  gators36

  I doubt it, because Dimension 4400 systems, have Dell motherboards and cases/chassis with exclusive features.

  You may have problems to install an ATX motherboard in a Dell case.

  The rear i/o Panel can align properly, then you might have to change that.

  Both ATX case and motherboards do not have the same front wiring connectors that use 4400.

  Dell uses an owner Ribbon to the front connector, while the standard ATX cases use Molex type connectors, you will need to find a way to redo the electric installation of the front panel and USB ports, because Dell has never published the details of the pinout.

  It cost less likely to buy an ATX case retail, as well as a motherboard.

  Bev.

• Can upgrade you Dell Dimension 4400 to Vista/WIN7

  Can upgrade you Dell Dimension 4400 in Vista/WIN7?

  Meet the system requirements? If Yes, you can purchase Windows 7. If not, stick with XP.

  Windows 7 system requirements

  If you want to run Windows 7 on your PC, here's what it takes:

  • 1 gigahertz (GHz) or faster 32-bit (x 86) or (x 64) 64-bit processor

  • 1 gigabyte (GB) of RAM (32-bit) or 2 GB RAM (64-bit)

  • 16 GB of disk space available (32-bit) or 20 GB (64-bit)

  • Graphical device DirectX 9 with WDDM 1.0 or higher driver

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I can add on a hard drive to my Dell Dimension 8200

  I have a Dell Dimension 8200 with a 100 GB ATA / hard disk, it is full and I have only 4 GB of free space. There intel9R0 4 CPU 1.70 GHz, running windows XP Home Edition. I would like to add a 500 GB hard drive, can I just add this hard drive as a #2 as a normal drive.

  Yes, if you install 2nd disk after formatting it will appear as another drive in 'My computer' and you can move files to free up space on your primary drive.

  In addition, you can install the new drive, clone the old drive him (several disks are delivered with the software or you can download it from the Web site of the manufacture) and then delete the old drive... just a matter of what you prefer, option 1 is easier.

  Keep in mind there are two types of hard drives: EIDE (or "parallel ata") is the oldest type, the cable is 40 pins of a connector that is about 3 inches wide. Newer drives are SATA ("Serial ATA") with a connector 4 pins which is about 0.75 inches wide. On the top of my head I do not remember if Dell Dim 8200 SATA or not, but I think. Worst case if you do not find an EIDE drive and your computer does not have a SATA connector, you can add a PCI card that will add. Some of these cards may not allow to boot from it so you should keep your installed current 100 GB drive for the installation to work.

• Drive hard question about laptop

  I have a laptop HP Pavilion, model dv6885se, now it's going on 4 years. The dv6885se has been working flawlessly for the full time, but I've noticed lately strange questions... seems to hang occasionally. I think the hard drive is out, but all controls said no, but I want to replace the hard drive. I bought a SATA device and restored my drive hard (via Norton ghost 15) to the new SATA drive, but he could not start... BIOS or? Maybe the question, don't know. So I want to return to a player that works (ATA or IDE) I think... tried to find hard drives over the internet, but it seems that nobody produces devices more since everyone is going to the SATA drives. Can someone help me find a new ATA IDE drive?

  + 1 on the Shhh - response

  If it's a desktop computer, where you have little room for creativity (and cards), I can see where you might have able to clone a HDD IDE to SATA drive, then replace IDE SATA.  But with a laptop?

  You mention it is in Vista, so also, makes no sense.  IDE has been eliminated well before Vista laptop, if I remember.

  I googled HP dv6885se.  This unit has two bays for HARD drives.  I doubt that either one is IDE, but I wonder if your original problems may have something to do with the confusion on who was the boot drive?  Physical replacement or cloning that bad?

  This site Web Cnet sez the primary drive is SATA.  I didn't find this basic bit of info on the HP support site...

• HP Pavilion g7-2110ex drive hard question!

  Hello

  I can't partition the hard drive... to install another os

  I tried partition by computer management, but but it is likea a mirorr

  I don't know something as a basic or dynamic disk is...
  plllllllllllllllzzzzzzzzzz heeeeeeeeellllllllllllllllp

  You have only one physical HDD of 750 gigs. However, you have a simple configuration and dynamic silly. I think you can convert the 130.94 segment to a basic partition.

  Open a command prompt

  Type "diskpart" [Enter]

  Type "help" [Enter] and RTFM

  Type "LIST DISK" [Enter]

  DiskPart spits out a list of all hard drives in your system. Should look like this:

  Code:

• Drive hard question about E1505

  My one HD has a 53 gig C drive and D drive with 17 gigas

  The C drive is full and the D drive and has about 15 free concerts.

  What is the D drive?

  Can I move some files from C to D to free up space on C

  that I could do to get more disk space?

  Replace the existing drive or add a second drive?

  Thank you

  
  

• Dell Dimension 4600 hard drive or what to get

  Hello

  My old hard drive on my Dell Dimension 4600 (2004 512 MB 400 mhz Pentium 4 2.8 GHz processor) is about to die and I would replace it with a 250 gb, the old man is a 80 GB... I use a box of HDD to move/save files.   You want to spend less than $100.

  Would like to know what you guys recommend that on what to get (data sheet), any help info would be greatly appreciated

  Thank you

  Bil

  Haha, yes man, I learn, I thank very you much!  No further questions, lol

  Thanks again

• Dell Dimension 2400 HD failure. installing new HD

  I have a Dell Dimension 2400. The computer crashed and the computer shows now no hard drive installed. I removed the hard drive and put it in one of my other computers, and my computer does not recognize the drive as a hard disk.

  I put another hard drive in my Dell, (same 40 MB; but different mfg) and the new hard drive is not recognized as a hard drive. I go into the configuration and it shows the diskette and cd installed, but not installed hard drive. Looking at the motherboard, is there that one connection for HDD in these models, so cannot plug into any other manor. Put the jumper to master on and cable that SELECT on but again Dell shows no HDD installed.

  The orig Dell hard drive, does not present as a drive in my work computer, but I'm trying to replace it with that.

  When I insert the OS disc that came with the system, it starts repairing and loads the files, but cannot format the hard drive and doesn't declare any installed hard drive.

  Assuming that the drive hard orig failed, and the new hard drive is a drive to work, are there specifics on something special that needs to be done when you install a new hard drive in a Dell Dimension 2400? I am unable to find all the technical manuals on how to install a new hard drive in my Dell, even though I have all of the orig CD that came from Dell.

  Any help/thoughts would be appreciated.

  Thank you...

  
  

• Satellite M70-159: put disc HARD question

  Hello.
  I have problem with my laptop Toshiba M70-159.
  When I have my laptop turned on, wait 2-5 minutes and my hard drive turn off why? I put in Toshiba Power Saver to never... when I click on some... my hard drive won't power on and I hear it. How can I make my drive hard not power down?

  Please help me, I have to get some software or what?

  Hello

  First of all, I would like to know why you are sure that HARD drive turn off 100%.
  If you do not hear that the HARD disc spins, it does not mean that the HDD power off.

• Hard drive Dell Dimension 8300

  I replaced the hard drive on Dell Dimension 8300. Install windows XP disc that came with the computer and Microsoft, s aid. When I start the computer, I get a full screen says "a SATA primary drive 0 not found.» Secondary drive 0 not found. Secondary drive 1 not found. THE ATTENTION! Operating system installed active mode. Available memory limited to 256 MB.  Strike F1 to continue. F2 to run the Setup utility. "Then when I strike F1 key to start the windows and the computer works. Question is why should I strike F1 to start.

  Monday, February 11, 2013 18:40:10 + 0000, Soli_976 wrote:

  I don't know how to access BIOS. Instruction to strike F2 book States, but that takes you to the SETTINGS and there is here no element that refers to BIOS.

  The 'settings' you see is the BIOS settings. This is where you
  you want to be.

  Ken Blake

• How can I erase my hard drive on a Dimension 3000? Please help soon.

  I need to COMPLETELY wipe my hard drive.  I use the "Dell reinstallation Cd Microsoft Windows XP Home Edition Service Pack 2". How can I use the disk to erase my hard drive. And after that, I have to reinstall all drivers and others. As montors, CHIPsets, Etc and.

  When I try. It asks the next question.

  Installation of Microsoft XP Edition family

  ____________________________

  ____________________________

  The following list shows leaving them existing and space unpartioned on this computer.

  Use the ARROW UP and DOWN keys to select an item in the list.

  • Partion1 [FAT] 47 MB {39 MB free}
  • C: Partion2 [NTFS] MB 72645 {51513 free MB}
  • Unpartioned 8 MB of space
  • F: Partion3 [FAT32] 3585 MB {1356 MB of free space}
  • Unpartioned 8 MB of space

  ENTER = install D = Delete Partion F3 = exit

  Remove a? If so, which. I am a noob on this Yes, you can be VERY detailed.

  Here's the info of computers:

  Dell Dimension 3000

  Intel (R) Celeron (R) CPU 2.40 GHz

  2.39 GHz, 512 MB Ram

  Maxtor 6Y080L0 80 GB HDD

  Windows XP Home Edition

  NOTE: remember that I want to just reinstall windows in order to erase my HARD drive. using the reinstall drive.

  
  

• Question for Dell Dimension 3000 IDE connector

  Hello

  I'm not sure if this is the right place to post, but please be patient with me. I have a loyal Dell Dimension 3000, 2 GB RAM, P4 processor, 1x250GB HDD burners 2xDVD-R, 1x3.5in floppy drive hard.

  My Question is how to be able to add a second HDD. I have no way to connect to one. The cable I have all what it connects to the current. There is no way with my current cable to connect a second HDD. I don't know what type of connector IDE cable I need or where to buy it, or if there is even an option to one.

  I have the tray and extra HDD ready and waiting but no way to connect. Any help is greatly appreciated.

  John Briggs

  The dimension 3000 will support two hard drives, but you will need support for additional hard drive and one connector three IDE 18 "L, 80-wire cable in water data, which is connected to the primary IDE hard drive and motherboard J6J2 PRI IDE connector, see page 38

  Dimension 3000 second hard drive installation.

  There are no instructions for the installation of a second IDE/EIDE hard drive in dimension 3000, but as the Dimension 4600 has the same case and chassis, you can use the 4600 instructions for the physical installation, see page 18:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-4600_service%20manual_en-us.PDF

  Set the jumpers the second hard drive for "Cable Select" and connect it to the middle connector of the IDE data cable, which is attached to the main hard drive.
   
  After you have installed the reader, enter the setup and make sure the hard drive is set to Auto [on].

  To access the configuration, press the F2 key after a restart of the computer.

  For the details of the system configuration, go to page 34, here:

  http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_dimension_desktops/dimension-3000_service%20manual_en-us.PDF

  Use disk management to partition, format, and assign a drive letter on additional hard drive after installation for Windows to recognize the hard drive.

  Bev.