driver IGFX not working
my driver igfx stops working in different areas, while in the game world of warcraft, that it's the only time wherever it seems to happen he gets one I can use the computer for different programs but can not log in the preticular character that was used at the time others will work fine
my driver igfx stops working in different areas, while in the game world of warcraft, that it's the only time wherever it seems to happen he gets one I can use the computer for different programs but can not log in the preticular character that was used at the time others will work fine
First thing you should do is, check if the system requirements of the game. Make sure that the installed video card is compatible to run the game. Another is, if the video card supports testing of games updated the video driver from the manufacturer's website.
Tags: Windows
Similar Questions
-
Re: Satellite A65-S1067 - display driver does not work
As stated in my title, the display (ATI Radeon 7000 IGP) on my Toshiba laptop driver does not work and has not worked for quite a while.
Whenever I try to play a game that is to install a game (like World of Warcraft or Civilization III) it does not work because it says that my display driver does not work.
Can someone help me with this?
Hello!
You use the factory settings on your laptop computer or you have installed your own version of Windows?
And have you tried to update the driver? I put t know what OS you use, but the Toshiba site, you can search for a new driver.
http://www.CSD.Toshiba.comAnd have you tried to update the version of DirectX? You can find on the Microsoft Web site.
Sorry, but at the moment I can t tell more.
Good bye
-
my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available
Reset the SMC.
Barry
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello
hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.
When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.
It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.
I ran a system restore but the problem remains.
I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.
Matt
Hello
Sounds like the GPU problem.
But try the graphics card driver update.
Use the most recent driver for your graphics card.In addition, clean the fans of portable computers.
Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.If this is not enough, then a problem of graphics chip would be possible.
-
External Combo CD-RW/DVD-ROM drive does not work with USB 1.1
Hello world
I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...
Thank you very much in advance.
Kind regards
Steffen RiegerHello
AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.
-
CD/DVD drive does not work after 8 Win instalation
Since a month since I've updated my windows in windows 8, everything works fine but the DVD - RW.
When I put the blank cd and try to open it, it gives me error when opening by saying:
"windows could not complete the format".Who's a software or a hardware problem?
waiting for help!
This means that your CD/DVD drive no longer works and is not recognized by the system?
If Yes, then I would recommend checking this Toshiba document that I found on the portal of the knowledge base site:
+ Why my CD/DVD drive does not work after upgrade to Windows 8? +
http://APS2.toshiba-tro.de/KB0/FAQ2B03F10002R01.htmYou must uninstall the programs from Toshiba:
TOSHIBA Recovery Media Creator
TOSHIBA Disc Creator -
Satellite 2430: CD/DVD drive does not work - i/o error
Hello all Toshiba people.i have recently bought a Toshiba Satellite 2430 for a very good price. One thing the carpet * a DVD - ram Uj - 810 drive does not work when I put in any type of cd or dvd, I get this error
F:\ is not accessible.
The request could not be performed because of an i/o error.I talked to my local computer Wizz and does everything that he suggested to the letter and still the same problem. He suggested updating the bios drivers and the only way to do that is on a disk drive that she cannot take the an or a CD or dvd drive is not working. Can you please help me!
Begging you a lot
Michael BorgerIn my view BIOS update will not change.
I assume that the reader has worked in the past with the same BIOS version
It is a drive hardware problem or some registry keys are corrupt.I think that it s a hardware malfunction may be a matter of lenses.
But try this;
Remove the drive from Device Manager and shut the laptop computer. After restarting again the operating system should recognize the drive again. Then you can check the functionality.Otherwise, you can remove the disk from the laptop, and then start the laptop without the drive. Then stop the laptop, put the drive in the notebook and start over.
The firmware should again loads.But if these procedures help t, I don t see it differently as for replace the drive
-
Virtual audio driver does not work on Equium A100
I thought that my problem is solved, but it is not (referring to my other thread)
I downloaded the audio driver as advised, but he said 'your computer doesn´t support virtual sound '.
I bought my computer in Spain and changed to XP Professional to get the English language (and I like more Pro).I downloaded all the drivers in the download section of satellite in English - all are installed.
Finally, one is the virtual audio driver is not working.
Tried the Spanish version, too and it is said the same thing.All solutions?
Thank you very much in advance!
Hello
To my knowledge, install drivers in the correct order, if you install the operating system manually.
It is a prerequisite not if you want to use the Toshiba drivers, tools and utilities.I can t believe that it of not possible to install the audio driver.
XP Home and XP Pro uses the same drivers there is no problem of driver compatibility. I think you should follow the installation guide that you can find on the page of the driver and then install all the drivers as described in the document. -
Satellite Pro A120: DVD/CD-RW drive does not work
Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?
Have you tried the Device Manager and it says it works normally!
Any ideas please?
Thanks :)
> apparently it has been disabled somehow
I put t think that the disc has been disabled!How someone or something should turn off the drive? You have disabled the drive? I don't think so!
You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
You are getting error messages or what's wrong?Perhaps the reader can read or burn CDs or DVDs.
This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.Maybe the replacement drive is required!
-
CD/DVD drive does not work on my Satellite L300D
Hi all
* I have Toshiba Satellite L300D laptop and my OS is Windows Vista.*
I don't have any driver cd... when buying. They ask me to download from internet if any necessary driver software.
Now if I put a cd/dvd is not readable. The option of cd/dvd drive is invisible in the my computer window.
I renewed my anti virus and checked the laptop. There a few virus and I deleted all the viruses.
But still my drive does not work.What should I do? Also, my warranty period expires last month. I'm not having any recovery cd also.
Please give me the solution.Hello
Please check if the CD/DVD drive is listed in Device Manager.
If it s listed, then it means that ODD has been recognized by the Windows operating system.In this case, try this;
-Remove the STRANGE to the list of devices.
-remove the filters above and below of this registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-Reboot the laptopUsually, this helps.
-
Wireless driver does not work on Satellite A30-PSA30E
All the ideas that is suitable for the above model driver, I downloaded about 5 drivers wireless on the site, but none seems not to work.
What do you mean with the driver does not work?
Do you have an error message or what?
Have you checked if your laptop supports a minPCI wireless network card?
If your mobile phone does not support an internal WLan card then you will not be able to install the WLan card driver :) very simple
-
my hybrid HDD/SSD drive does not work with my new Y50
my hybrid HDD/SSD drive does not work with my new Y50
Help!
Hi YouMaCry,
You have any records? or a USB recovery?
If you cannot install an OS on your SSHD your SSHD can be defective, because it is reading it is cluster/bad sectors. A defective HDD/SSD/SSHD can still be detected (sometimes even when it is defective).
To be sure contact Lenovo Support Center and ask them to send you your SSHD/unit in a get fully tested Lenovo the SSHD repair depot - and have defective parts repaired within a reasonable time!
See you soon
-
My CD/DVD drive does not work
My CD/DVD drive does not work, he plays any kind of disc, I don't think that my computer recognizes that it has a DVD player that more, please help!
See this knowledge base article http://support.microsoft.com/kb/982116/en-gb
Remove spyware, etc., can often mess up some registry settings that make it seems that the CD / DVD ROM drive is defective.HTHNeilwww.nwarwick.co.UK -
Blocks - Spooler subsystem or the display driver did not work properly
I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?
Hello
1 when was the last time, he did not work properly?
2. the accident happens at random or when executing a particular task?
3 did you a recent software or changes to the material on the computer?
Method 1:
I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
Check if the problem persists, if she does not follow the steps in method 2:
Method 2:
This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.
I also suggest you to follow the steps mentioned in the link and check.
Do not operate the automated FIXIT. Follow the manual steps and check.
You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."
http://support.Microsoft.com/kb/810894/en-us
(Also applies to Windows Vista)
Method 3:
You can also update the display drivers on the manufacturer's Web site or use the link below.
Updated a hardware driver that is not working properly
See also:
Pick up the pieces after a computer crash
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash
Hope this helps and keep us informed if you need help.
-
I have install vista and I want to convey in the USB key... because my dvd drive does not work... Please tell me what I need to do
Please send your reply to my email id, or post it here...Hello
Vista is not designed to be installed like this.
But others led to ways to do so.
This may interest you on this subject:
"How to create a USB of Vista Installation key '
http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html
Google will help you in this matter.
See you soon.
Maybe you are looking for
-
Updated some graphics for m7580.uk PC card?
Hello I'm hoping to move my current card graphics (Geforce 7600 GS - 512 MB) to something a little more up-to-date, without putting at level of the power supply, motherboard or processor. Looking at the Geforce 7800, 7900, 7950, 8500, 8600 or 8800? I
-
Satellite Pro A200-PSAE4E: Volume control moves without any breakpoint
First time I've used this excuse. Just bought my second Toshiba this time Satellite Pro A200-PSAE4E Vista Business. The volume control turns both clockwise and anti hourly without any breakpoint that it in either... just begins to turn. Increase and
-
complete network slow after upgrade to iOS 9.2
Hello obviuosly the update to iOS 9.2 decreases my network speed for all devices on the network. I tested the speed with public speed tests and answers have been slower than before the update (e.g. ping time before: 42ms; after: 1500 ms; even with do
-
Is it possible to transform a power devices or not at a specified temperature?
The unit lights up and warms at a given temperature. It must be turned off until it cools to a specified temperature lower, where it restarts and heat again. The unit must oscillate between these two temperatures for a period of 40 minutes.
-
When I turn on the camera and press the 'camera' button I can only see my scene through the LCD - the viewfinder is dark. If I press the button of the camera again, the viewfinder opens. Have I not the wrong preset somewhere?