DRIVER_IRQL_NOT_LESS_OR_EQUAL (netwlv32.sys) - Windows 8 Pro

Similar Questions

• Get the Blue error screen "DRIVER_IRQL_NOT_LESS_OR_EQUAL" frequently on windows XP Pro and Win 7

  Hello

  Our Office recently we are facing issue with as "DRIVER_IRQL_NOT_LESS_OR_EQUAL" error blue screen frequently in most of the laptop,

  all the laptop with Win XP Pro-SP3 and Win 7 Professional.

  * It causes while he was working on several browsers or applications.

  * A few times everything by removing the Ac laptop adaptops, getting suddenly Bluscreen problem with the same error as "DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  My troubleshooting:

  According to my Google search, I did the troubleshooting below:

  * In format and re-install with fresh people with Win XP and Win 7 Pro system.

  * Updated with the latest patches from Microsoft.

  * Updated all hardware drivers of Lenovo

  * We use Symantec Antivirus 11.0 client in all laptops, in this way, we had to also call with symantec and log the issue with them. but according to the confirmation of Symantec, it is not caused due to Version 11.0 Symantec

  * According to lenovo support, we have changed the physical memory RAM.

  After all troubleshooting done all too, we always get problem.

  Error message:

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: halmacpi.dll

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  Halmacpi.dll - address 0x834257a0 base at 83422000 DateStamp 0x4a5bbf07 0 x

  *****************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: SYMTDI. SYS

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X000000D1 (0 X 00000002, 0 X 00000000, 0X00000000, 0X00000008)

  SYMTDI. SYS - address 0x8cf00023 base at 0x8ceef000 DateStamp 0x4ed7ca75
  ***********************************************************************************************************

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: igxpmp32.sys

  DRIVER_IRQL_NOT_LESS_OR_EQUAL

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0X100000D1 (0 X 00000002, 0 X 00000008, 0XB846D160, 0XB846D160)

  igxpmp32.sys - address 0xb846d160 base at 0xb8265000 DateStamp 0x4e85e92a

  *************************************************************************************************************

  Please give us the solution to get out of this edition

  Error logs:

  https://SkyDrive.live.com/redir?RESID=B7400F7AC914BDC7! 104 & authkey =! AHh7MiYoqEYxme0

  Hello

  The Microsoft Answers community focuses on the context of use. Please join the professional community of COMPUTING in the TechNet forum below

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• DRIVER_IRQL_NOT_LESS_OR_EQUAL (wanarp.sys) windows 8

  When I try to use my key activ to connect to my corporate network I get this error and a BSOD.

  Aelghanam

  McAfee is killing wanarp.sys MS remote access and routing ARP Driver of Microsoft Corporation.  I remove it and use the built in Defender in its place.

  McAffe often contributes to BSOD

  
  

  I remove and replace it with Microsoft Security Essentials

  
  

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

• Laptop HP Pavilion dv7-60: 10 Windows in DRIVER_IRQL_NOT_LESS_OR_EQUAL (storahci.sys)

  My HP Pavilion dv7-6020ss laptop gets crashed with WINDOWS 10 (later month firt using Windows10), I received this message: ""DRIVER_IRQL_NOT_LESS_OR_EQUAL (storahci.sys)", it restarts." ¿Any solution?

  Hi @Sacramento,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thank you for posting. I read your post, and I understand that your laptop has crashed at 1 month after the upgrade to Windows 10. I wanted to help.

  Your computer may start normally? When the laptop crashed, did you get a blue screen with the error message?

  Please check if all the updates of Windows installed on your laptop?

  How to: install and update drivers in Windows 10

  You have 28 days to return to Windows previous once you upgrade to Windows 10.

  If the problem persists, you can consider going back to previous Windows:

  Return to earlier Versions of Windows

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• Error Windows 8 | DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)

  Hello. I recently made a new re - install on my HP Envy m6 to make my PC more smooth, but after that and re - download my content, I get an error when I run some programs. My PC is Windows 8 64-bit, and the error says:

  DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys)

  My minidump files:

  http://1drv.Ms/1mI3jFl

  http://1drv.Ms/1mI3a4Jhttp://1drv.Ms/1mI3pg7

  http://1drv.Ms/1lrJ03Y

  http://1drv.Ms/1lrJ1Vq

  http://1drv.Ms/1lrJ9nK - compressed files

  I've read about it online but do not understand because it seems that everyone had different problems or newspapers. Could someone help me solve my problem?

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & win 7 (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys) crash of Windows 8

  Hello

  I am running Windows 8 on my laptop and have had to face blue screen crashes quite frequently during the past two weeks with error DRIVER_IRQL_NOT_LESS_OR_EQUAL (tcpip.sys) . Here is the link to my system minidump files. Please guide me on the Bill of lading.

  https://onedrive.live.com/?CID=081483B437F58824&ID=81483B437F58824%21105

  Errors that you encounter is perhaps having two-thirds in real time an installed anti-virus software, Norton and Kaspersky.

  Can you try uninstalling Norton and Kaspersky and see if error fix.

  Then reinstall Norton or Kaspersky, but not both, using the most recent version or just use the firewall and antivirus integrated Windows 8 (Windows Defender).

• Windows 8 Pro - PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys) - Blue Screen of Death

  Hello

  I get a blue screen with the following error: PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys). This happens whenever I start. My computer will be turned on and be normal for the first five minutes, and then all of a sudden, I get this error.

  The computer I use is that I built myself. Here are some features:
  MSI - card mother B75A-G43
  -Processor Core Intel i5-3570
  -RAM Kingston 8G
  The computer is running Windows 8 Pro with Media Center (32 bit). I'm also using AVG Internet Security.
  I have not installed new hardware recently and the only software I had installed before this error was Adobe Reader XL
  Any help would be great.
  Thank you
  Vince

  http://www.Avg.com/us-en/utilities AVG Remover, I would like firstly, uninstall AVG, restart the computer, and then run the AVG Remover and restart another.     Try to run a day or so... on the default windows Defender.     AVG can be reinstalled quite simple if this is not the cause.

  Typically when its saying Page fault in nonpaged area... makes me think it could be bad memory, or some installed program writing to the wrong places.    Remove 1 stick of 4 GB? and swap to test each?

• Windows error DRIVER_IRQL_NOT_LESS_OR_EQUAL (athw8x.sys).

  Original title: windows error.

  I have windows 8, but the last 3 days, while I was working, I get this error:
  DRIVER_IRQL_NOT_LESS_OR_EQUAL (athw8x.sys).

  My laptop crushes down when this error is displayed.
  What can I do?

  Thank you

  XV

  These were related to athw8x. sys. Driver Description: Atheros Wireless LAN Driver. Driver update Site: http://www.atheros.cz/.  Yours is 2 years and more.  I'd install the most recent driver available.

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  Windows 8 Kernel Version 9200 MP (4 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16628.amd64fre.win8_gdr.130531 - 1504
  Computer name:
  Core = 0xfffff802 '1f619000 PsLoadedModuleList = 0xfffff802' 1f8e5a20
  The debugging session: 06:25:20.330 Sun may 4, 2014 (UTC - 04:00)
  System Uptime: 0 days 1:01:26.034
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ...................................................
  Loading user symbols
  Loading unloaded module list
  .............
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck D1, {28, 2, 0, fffff88005da743c}

  WARNING: Unable to verify timestamp for athw8x.sys
  ERROR: Module load completed but symbols can be loaded for athw8x.sys
  Probably caused by: athw8x.sys (athw8x + 10d43c)

  Follow-up: MachineOwner
  ---------

• Sony Vaio SVT14113CNS error DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys) [Intel Rapid Storage Technology] on Windows 8 x 64

  March 30, im getting this error on windows start.

  When I start my notebook ' VAIO' logo comes with "Preparation auto repair. After 2-4 seconds 'circular loop treatment' pause for 1 sec & 'Blue screen' comes with

  "Restart your PC on a problem and needs. We are only collecting the error information, and then we'll restart for you"

  error "DRIVER_IRQL_NOT_LESS_OR_EQUAL (iaStorA.sys).

  I know its technology Intel Rapid Storage Technology.

  I had my backup of the C: & D: via Ubuntu live disk installed on USB key on a Portable HARD drive.

  now, I just need to get into recovery mode.

  When I press on "Assist-> recovery & hold ' and then it goes blue screen.

  (1) im thinking to 'Safe Mode' start up. because if it will allow the startup I can uninstall the drivers of Intel rapid storage Tech.

  Please tell how I can do it, because I can browse the live Windows by Ubuntu Pendrive files.

  (2) 2nd is I can also navigate my "recovery Partition", so could you tell me how to use this 'partition data' to something to copy paste for USB...

  My Recovery Partition to a folder 'sources' & also sources---> install.wim (9.05 GB)

  folder 'sources' is total 17.9 GB in size.

  If you (microsoft) can help me with the idea of 1st activation mode without fail to start, then it would be very very useful. Please, I beg you.

  just need to as the bypass to my window troubleshooting-made & then I can start my recovery.

  thnx.

  Hi Christophe,

  As the report makes clear that the Intel rapid driver is the root cause of the
  question, we can try to run restore the system to an earlier point to cancel the update of starting on the recovery Partition.

  You can see the Sony guide learn more about the problems of system recovery:

  http://community.Sony.com/T5/Windows-8/Windows-8-upgrade-Troubleshooting-FAQ/TD-p/41893

  http://Genesis.Sony-Europe.com/InStranet/ccil_sony/selfservice/searcher.jsp?docid=125104&l=en_GB&m=null

  To go in safe mode since the Partition configured recovery on your computer, you can
  Follow the instructions below.

  Once you are on the recovery Partition, you will be asked to press any key to load sound
  content, to do. First, you will need to select your keyboard type. Press the page layout you want to use. If you want to browse the available options, press 'see more keyboard
  layouts' until you find the one you want to use.

  Windows asks you to choose an option. Press help.

  

  In solving problems screen, tap Advanced.

  

  In the Advanced options screen, tap Start parameters.

  

  You are informed that you are about to restart to change several options of Windows, including activation of the Secure Mode. Press restart.

  

  Your computer or your device restarts again and displays nine startup settings, including Safe Mode, Safe Mode with network and Safe Mode with command prompt

  

  Press F4 on your keyboard, to turn on Safe Mode, F5 to activate Safe Mode with network and F6 activate Safe Mode with command prompt. Windows 8 and Windows boot 8.1 now depending on the setting you have selected.

  It will be useful. Please let us know in case you need more information on issues related to Windows.

• BSOD (DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys)

  Hi, I am facing the problem of BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys on my laptop (HP ENVY 15-j126tx)

  OS: Windows 8.1

  Intel HD Graphics 4600 with the version of the driver 10.18.10.3277

  I try updating the driver, but the problem doesn't seem to be resolved. I also try to restore the pilot but after cancellation, I have been unable to adapt to my screen resolution and brightness (I'm not sure he always get BSOD DNon).

  What should I do to fix this?

  I hope that it was able to solve this problem with the resolution of the screen and able to adjust brightness.

  Thank you.

  Can be resolved by updating the driver manually by using the Device Manager.

• [P50] Impossible to activate the Hyper-V (Windows 10 Pro) feature

  Hi all

  I'm having difficulties about enabling Hyper-V on my P50.

  I activated the setting of virtualization in the BIOS P50. I also disabled the P50, wait a minute and then turned back on. Whenever I enabled the Hyper-V feature, when Windows Update required restarting indicates failure update and perform a restore.

  My P50 system info is as below:

  Host name: P50
  Name of the operating system: Microsoft Windows 10 Pro
  OS version: 10.0.10586 n/a build 10586
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Product ID: 00330-80106-07335-AA055
  Manufacturer: LENOVO
  System model: 20ENCTO1WW
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 94 Stepping 3 GenuineIntel ~ 2492 Mhz
  BIOS version: LENOVO N1EET41W (1.15), 31/12/2015
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume1
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Total physical memory: 65 402 MB
  Available physical memory: 60 918 MB
  Virtual memory: Max size: 75 130 MB
  Virtual memory: available: 70 661 MB
  Virtual memory: in use: 4 469 MB
  The page file locations: E:\pagefile.sys
  Logon server: \\MicrosoftAccount
  Corrections: 6 fixes installed.
  [01]: KB3116278
  [02]: KB3120677
  [03]: KB3140743
  [04]: KB3149135
  [05]: KB3167685
  [06]: KB3163018
  Requirements for Hyper-V: VM Monitor Mode Extensions: Yes
  Virtualization enabled in Firmware: Yes
  Second floor address translation: Yes
  Data Execution Prevention available: Yes

  The reason why I have 64 GB of RAM on P50 is to have several virtual machines. Help, please.

  Kind regards

  Arief

  Fixed everything at the time of race 'auto BCDEDIT/set {current} hypervisorlaunchtype', run EasyBCD tool and did a re-recreate/startup repair files. Don't enable Hyper-V feature no longer cancellation after reaching 95% percentage of update.

  Thank you, all.

• HP Pavilion 15 lowered a score of 8.1 for Windows 64-bit for Windows 7 Pro 64 bit driver problem

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

  Mushty wrote:
  

  I just downgraded a HP Pavilion 15 Notebook, which was just recently bought with Windows 8.1 64-bit installed.

  The owners could not get with Windows 8, so they bought Windows 7 Pro 64 bit.

  After changing the option of Secure Boot UEFI BIOS, I installed windows 7 for them, installed the drivers from the site HP Web for this model of laptop, but there are a few drivers who will not not turn on.

  Product number is F8S59EA #ABU

  SYS ID card is 2163

  Intel processor Core I5-4200U @ 1.60 GHz

  8 GB memory

  BIOS Version F42 has been upgraded to F62

  But there is a PCI device in device without driver manager now, details of the error are:

  PCI DEVICE

  Hardware ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_2163103C & REV_01 is a card reader.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63708.exe

  There is also another error of unknown device listed, the details are:

  The unknown device properties

  Hardware ID

  ACPI\HPQ6007 is the software of HP 3D Driveguard

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6732717&sw_lang=

  I don't know if this is related to the first error message, but I thought I'd list them here anyway.

  In addition, try to install the software Cyberlink listed on page of drivers for this laptop, Cyberlink Director Photo software, the software Cyberlink PowerDVD and PowerDirector Cyberlink software all refuse to install.

  PowerDVD and PhotoDirector gave "Software can be installed in the machine allowed" error message and PowerDirector gave the error message "is not a valid HP drive, the installer stops now.

  If someone could please help in telling me that drivers are missing, (I enter all the machine ID in the box HP drivers, pilots said it remained for this machine, installed correctly, just these some problems) I would be most gratefull and the owners of laptops would be too!

• HP Probook 4520 s installed new hard drive with Windows 7 pro x 64 and drivers - very lag

  Hello

  I had my HP Probook 4520 s for 5 years and a few months ago, he started to become very lag, especially when you use the internet, streaming video and games.

  I thought I had identified the problem as a bad sector on the hard drive and so I bought a new hard drive and upgraded the RAM from 4 GB to 8 GB at the same time.

  When I installed the new hard drive, I couldn't burn an image of my old hard drive (it would stop during the process and was unable to do so because of an error). I used my little HP Windows 7 Pro x 64 operating system DVD and your HP Application and Driver Recovery DVD to install the necessary drivers on my replacement new drive.

  The RAM and the new hard drive seem to be good, however, it's more lag. I tried to use latancy monitors to see if the drivers are the issue. It seems that there is a huge amount of latancy and my CPU is at an almost constant usuage of 100%.

  LatancyMon points in the following drivers: usbport.sys, tcip.sys, acpi.sys, iastor.sys, ndis.sys, dxgkrnl.sys and so on.

  I've seen forums where they will guide you step by step how to determine what drivers are causing latancy. This I could do although he always seems to change drivers who are the cause of the problem and there seems to be a lot of pilots of causing this problem it is so difficult to bring out here that one. In addition, there seems to be no solution to these problems. The only one offered is to update the offending drivers. This does not solve the problem with lag and the latancy yet.

  Any ideas?

  P.s. I really don't know not what is the underlying issue is here so I don't know if this is the right forum to post in. Drivers may not at all be the issue, I spent the last four weeks trying to solve this problem.

  Hello skinandbones13

  Thanks for posting on the HP Forums!

  I understand that you have a problem with your laptop. However, since it is a commercial laptop, you should post your question on the map cell of the HP Enterprise Forums for a better answer.

  Have a wonderful day!

  Mario

• Y at - it a utility to run Windows XP Pro 32-bit handle its maximum of 4 GB of RAM?

  Just spent 1 GB of RAM 4 GB, windows XP Pro. When I boot it noted memory had changed. F1 to continue or F2 application for utility. I selected F1 and received a message on the config.sys file is corrupted. Do you have a ctr alt del; Exercised Windows and command ok. Computer closed down and had to go through the whole thing again. Don't want to stop again. Afraid I couldn't get it to the top. Is there a utility that I can run so that 32-bit system can manage its maximum memory off the 4 MB of Ram, I installed?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner