Driver scanner HPScanjet 6200 Windows-7

Similar Questions

• Driver scanner genius for windows 7 64 bit sf-600 CP

  I tried to run windows update and downloaded drivers are not "for this OS', also downloaded genius themselves without success, tried to run in compatibility XP sp3 as an administrator with no UAC jot id. All aonyone ideas?

  The manufacturer indicates a universal driver for win 2 k to win7, which is unusual

  http://www.genius-Europe.com/en/produktdetail.php?id2=50&ID=35&ID3=99

  Win7 Compatibility Center shows that the driver is available through windows update

• Driver scanner G2410 for windows 2008 r2

  I can not find a suitable driver for my G2410 Scanner, is it a good adviser

  Hello-

  I am happy that your place and running.

• Universal print driver Scanner for Windows XP

  We need to use a scanner to our Windows XP image and wondered if there is a print driver UNIVERSAL there that we could use so that we can keep the smaller image with less drivers?

  Not all of the features that may be available with a pilot universal, you will have to experiment. Maybe this works;

  http://h20271.www2.HP.com/SMB-AP/cache/380442-0-0-190-121.html

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Driver for CanoScan FB630U Windows 7

  I n I find the driver for CanoScan FB630U Windows 7... That help?

  See http://software.canon-europe.com/products/0000461.asp.

  The latest driver for the FB630U is for XP. There is no drivers Vista or Windows 7.

  You need a new scanner.

• Driver scanner Kodak I65

  I just got a scanner of Kodak i65 and need to install the driver on my computer Windows 7, any ideas?

  Only supports Windows XP.  You may contact Kodak and see if they have compatible drivers for Windows 7, but I doubt it given the age of the unit.

• Cannot download driver scanner Epson Stylus NX400 all-in-one printer, error message "error during installation.

  Original title: windows 7 driver scanner epson nx4000 troubleshooting

  message "error during installation"

  Hello

  1. How do you try to download driver?
  2. What is the full and exact error message?

  I suggest to set up the computer in a clean boot state and then try to download the driver manually.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Now, try to download the driver for Epson Stylus NX400 all-in-One printer scanner manually on the manufacturer's Web site.
  https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=106004&infoType=downloads

  For more information, please see the link.
  Installation of a scanner
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  I hope this information helps!

   

• How can I get a twain driver for CS5 for Windows 7?

  How can I get a twain driver for CS5 for Windows 7?

  Since you have photoshop cs5 in the x 86 program files, then you have the 32 and 64 bit versions of photoshop cs5 installed.

  the 64-bit version of photoshop cs5 is in

  C:\Program Files\Adobe\Adobe Photoshop CS5 (64 bit)

  and the 32-bit version is in

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5

  
  

  
  

  If you have not changed anything in the menu programs, while two versions of photoshop cs5 should be included under Start > all programs

  
  

  
  

  Photoshop CS5 is the 32-bit version

  
  

  Photoshop CS5 (64 bit) is the 64-bit version

  
  

  You put the Twain plugin in Win32 folder from the link listed in the #1 message in the Photoshop CS5 32 bit Plug-Ins > import file

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5\Plug-ins\Import-Export

  TWAIN plug-ins | Photoshop CS4, CS5, CS6

  VueScan that mentions Ronald Keller is also a good option if you do not want to be restricted to the use of the 32-bit version of photoshop cs5 to scan in photoshop.

  
  

  Scanner VueScan for Windows, Mac OS X and Linux software

  
  

  
  

  Photoshop cs5 should also be able to use WIA support for your scanner.

  It would be under the file > importantmenu t in photoshop cs5 after you have your scanner is connected and turned on
  

• Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE

  Where can I find display driver for satellite A200 Windows XP 32-bit PCAECE? Help!

  Hello

  Most of the A200 series made use of this video card chipset.

  [Intel (r) Graphics Media Accelerator Drive X 3100 | http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1670 732xml & sliceId = & dialogid = 57594450 & stateId = 1% 200% 20 57598302]

  Hope this will help :)

• Can I update driver for c4585 for windows 7 to allow wireless printing?

  My photosmart c4585 does not work with windows 7, I can get the driver to work with windows 7?

  Here's the full features of Windows 7 software and the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-74912-1&cc=us&DLC=en&LC=en&OS=4063&product=3757825&sw_lang=

  Install the software and the configuration of your PC to a wireless printer connection. 802 11 B and G wireless protocols are supported by your printer wireless.

• Driver HP 15-r018dx windows 7 64-bit wireless

  Hi, I have a HP 15-r018dx and I need a driver for wireless network windows 7 64 bit. Guys do you know where I can download one?

  This thread should help:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/how-to-get-Windows-7-installed-on-HP-Pavilion-15-15-E028US/TD-p/2939547

• Home Media Network Hard Drive, Cloud Edition on windows 8

  Hello, I would like to know how to use disk hard mid with a computer running windows 8, instalation CD software doesn t work

  Hello, configure your Media Network Hard Drive Cloud home edition Windows 8 (.1) is quite easy.

  You can consider installing the update 8.1 for Windows first...

  But nonetheless go to the Lenovo Web site and download the latest version of the LenovoEMC Storage Manager.

  1.4.4.14439 worm.

  It works somewhat like the Iomega software former.

  (Assuming that your device has the latest firmware installed and everything is set up properly it should work fine.)

• How to install a hard drive more on a Windows Server machine?

  Disable windows server and install the new hard drive

  I installed windows on a hard drive server but now I want to turn off and install on a new larger hard drive. How can I go about it?

  Hello

   
  There are a few options that you can try:
   
   
  1. format the hard drive.
   
  2. replace a new operating system. When media starts, you are presented with the option to format the drive before installation.
   
  3. If it is a separate partition, and you're dual-boot, you may need to set your boot options after formatting your partition WS2008. Demarrer start on your older operating system drive, and then select the boot option fix for your existing partition from the operating system.
   
  Note: If both the HARD drive is connected to the same machine, start from the media format of the previous installation on the old HDD and install the operating system on the new HARD drive.

   
   
   
  See also:
  http://download.Microsoft.com/download/e/6/3/e63cf2f6-7f71-450b-8e4a-dace88e99456/Readme.htm
  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx
   
   

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.