Drivers for Dynabook E7/518PME. ? equivalent to 1130/1135

Similar Questions

• Need drivers for Dynabook E8/520PME

  I need help to find all the drivers / drivers for this laptop motherboard. I tried different sites but as this model is one of an Isabella and I can't the Reed Isabelle I find it difficult.

  I am running Windows xp pro on this machine. A manual would be useful.

  Thanks in advance

  Post edited by: kevin1961

  Hello

  Unfortunately, I also failed to find the drivers for this laptop from China.
  I found this site:
  http://www.Toshiba.co.jp/worldwide/

  There is a link to the Web from China Toshiba site but unfortunately I can t read this site :(

  Good bye

• Need drivers for my Dynabook CX1/214LE

  Hallo all.
  I have Dynabook CX1/214LE model Portege 4130 series.
  I need drivers for the new facility. Where is possible to download? On the Web from Toshiba site are not.
  Thank you

  Hello

  You must understand that there is not some sort of Toshiba global support and download page. That is why if your laptop is designed for the Japanese market so only is this laptop backed on to the Japan Toshiba support page.

  This laptop model is not available in Europe, and you won't find drivers on European support page. So either try to use drivers for some similar Portege model or directly check the download page for equipment manufacturers.

• Need drivers for my Portege Dynabook SS 10 L/2 1600

  Hello..

  I am beginner. I'm from the Indonesia. Where is the drivers for my Portege Dynabook SS 10 L/2 1600? Because there is none on the download page. I need to download, is that I really, really need to do a fresh install and my recovery disk is lost.

  Help me please...

  Hello

  This laptop does not for me. I searched the websites Americans, Canada, European and Australian Toshiba but nothing!
  Seems this laptop is a little older and is designed only for a market of Asia.

  Try to contact a provider of services in your country and perhaps you can order the recovery CD and CD tools & utilities service guys.

  Good luck

  By the way: If you are looking for current pilots like poster the pilot or driver Wlan then I recommend looking on the device make sites for compatible drivers.

• Drivers and tools for dynabook AX/55 has

  I need drivers and Toshiba for Dynabook AX/55 tools! Who can help me.

  HM, where dynabook came out? In USA or GB?

  So, here are a few links of driver toshiba, which could probably help you find the drivers you need:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp
  http://209.167.114.38/support/download/ln_byModel.asp

  Good luck with finding drivers for your machine.

  Greetz

• Where to find drivers for XP Qosmio E10-1KCDE

  Just reinstalled my windows XP OS because the older operating system crashed.
  Where can I download drivers for laptop E10-1KCDE?

  TIA

  Hello

  The European driver Toshiba page provides the Win XP drivers for the Qosmio E10 PQE10E series.

  Maybe I'm wrong, but I think the Dynabook Qosmio E10-1KCDE series seems to be a Japanese model.

  So I'm not sure if XP drivers from the European page will run on this laptop model. However, you can try to install a single driver. Maybe you are a lucky man and pilots will be compatible.

  Welcome them

• Want to Phoenix 810-130qe: Windows 7 drivers for Envy

  Hi guys

  I use a computer to office 810-130qe want to Phoenix, it was delivered with Win 8. Recently, I replaced a new HARD drive and installed Win 7 64 bit instead.

  Need help to download all the right drivers for Windows 7 64 bit please.

  Thanks in advance.

  Hello:

  Here are links to drivers chipset, ethernet and usb3... I don't know where to find the others.  There is no equivalent HP PC with motherboard that yours has that I know, who has W7 drivers.

  Chipset: The 2nd file on the left is the auto install file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-

  USB3: Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/22824/USB-3-0-driver-Intel-USB-3-0-Extensible-host-controller-driver-for-Intel-8-9-100-series-and-C220-C610-chipset-family

  Ethernet: 2nd pilot on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

• Information about the latest drivers for Qosmio E10 / F10 / G10

  Hey all, I don't know if a used Toshiba computer support on the European site of bed this thread, but I hope of course.

  Well it turns out that a little Japanese knowledge so I decided to go to the Toshiba Japan website, in the download section of pilot, and I was a bit shocked ^_^

  For my Qosmio E10, I realized that most of the downloads from the European websites of Toshiba are outdated.

  -There is a new version of the bios 1.70 (which improves stability with Intel chipset AFAIK) instead of on the site of the Euro 1.60. [I didn't try it because my machine is a French]

  -New Nvidia video drivers! 57,82 versus 57,79 on the site of the Euro. [I tried and there are new presets for PC games]

  -New driver tuner TV 1.0.2.6 versus 1.0.2.0 on the site of the Euro.
  [I tried and what a TOTALLY SOLVED MY TV PROBLEMS CHECK, I can finally save all: PAL, SECAM & NTSC without huge flicker that plagued the 1.0.2.0 version]

  -Toshiba offers 'Toshiba Virtual Sound' for owners of the E10 to the Japan. (in Europe, we still have the "Windows Media player SRS WOW" plugin) [I tried and it is a fantastic software, improvement of the sound is great with great presets, you won't believe what you get for your Harman/Kardon after installation of this!]
  It has the great advantage of working for all the Windows programs, not only in WMP as the fact the plugin 'SRS WOW' we have in Europe.

  As you can see there are a lot of new drivers that we, owners of European Qosmio, would really benefit.

  But there's something interesting that you should know about:
  Drivers Toshiba E10 euro site are also outdate compared to other Qosmio models pilots from the Euro site!
  For example:
  -The pilot of his "Soundmax", is a version of 3890 in section E10 and 5160 in the section of the G20!
  It's exactly the same chipset, so it is of course compatible and should also be in the section of the E10.

  -L'Intel LAN driver "INtel PRO 100 VE" is version 7.1 in the section of the E10 and 8.0 in the section of the G20.

  -L' utility development of photo is the version 2.4.0.0 for E10 and 2.7.0.2 for the G20.
  P.E.U. is a key point for Qosmio because he is directly responsible for the quality of image engine Qosmio!)

  I think it's a hassle to go to the other models Qosmio download section to find the latest drivers for our machines.
  Qosmio E10 is a year old and is a fantastic (and expensive ^^) piece of hardware, Toshiba please, update the drivers at the latest as soon as you can.

  It's about the E10, but if you have a F10, G10, I'm sure you can do the same thing as me and go see the download section of the F20, G20, etc... and you will find the latest drivers and downloads for your machine!

  As for now, I really hope that Toshiba would be the BIOS for EURO Qosmio E10 1.70. (For Japanese E10, it is located here: http://dynabook.com/assistpc/download/modify/bsqse102/index_j.htm?qry=.%2F%3Ffunc%3Dpi%26category%3D1310 20% 26keyword % 3Dqosmio % 26cpg %3 D 50% 26session %3 D 027063644820 20051)

  If a moderator of this forum is able to convey this message to the person concerned to Toshiba, it would be extremely useful too ^^

  Thanks for reading.
  Next time!

  Alcahest

  Hello.

  Thanks for this information. It seems that you are passionate about Qosmio :)
  Well, I think that the Japanese unit models differ a bit like a European models also the utilities and drivers. It of strange that the other drivers work correctly but
  I'm sure that if the new driver, tools and utilities are available for European units you will find this on the site of Toshiba Europe.

  Good bye

• Spare parts for Dynabook EX / 2513CDST

  Hey, I have a Toshiba Dynabook EX / 2513CDST I bought from Japan. I realize that this is not the best place to ask, but I don't have enough proficiency in Japanese to post in the forums.

  This is a picture of my laptop:
  http://image.blog.Livedoor.jp/powerdepot/IMGs/3/e/3e503e8d.jpg

  in any case, I'm looking for two things:

  (1) replacement hinges. One of the hinges of the screen broke, and now the monitor can almost freely down the back. In essence, I'm looking for something like this:
  http://www.pchub.com/UPH/laptop/55-16761-1663/Toshiba-Dynabook-satellite-2710-P50-4CA-cover-for-hinges.html

  But I need to find a site that sells those specific to the ex series

  (2) my laptop has a built-in TV Tuner, but miss me the drivers for it I need for Windows to recognize it. Toshiba won't send me a new CD for some reason any. I can't seem to identify hard-ware or the other (no manual).

  If someone knows the solutions or advice perhaps even could get somewhere with these problems, I would appreciate it!

  See you soon,.
  Wiseman

  Hey Buddy,

  are you sure that you need specifically for EX? I think they will be in a range of designs available and you can certainly use a machine with a different name of type, but the same design.

  So, with have this TV Tuner integrated... you tried to identify it with a linux from the CD? Maybe a knoppix distribution? There are a few other CD-vivid as the Ultimate Boot CD that has a lot of tools.
  I think that with some of them you can identify the hardware.

  Here are the links:

  Knoppix: http://www.knoppix.org/
  UBCD: http://www.ultimatebootcd.com/
  UBCD4Win: http://www.ubcd4win.com/

  I hope I could help... :)

  Welcome them

• Re: Qosmio F50 - where can I get drivers for Windows 7?

  Hello

  My University has a MSDNAA Microsoft's contract, allowing all students to benefit from free licenses of Windows, including Windows 7 Pro (32-bit and 64-bit). I had one since September 15, and Toshiba Europe has not yet posted any drivers for my Qosmio F50, so I can't use it.

  All solutions?

  PS: I went on the site of Toshiba USA and they have drivers for the Qosmio F55 (the European equivalent of the F50), so if any of you can tell me what F55 is equivalent to the F50 - 10 K, I'll be more than happy to try to get its pilots, test them and get back to you with your comments.

  Thank you

  Hello

  I think that no one is able to tell what American model is exactly the European F50 - 10K. ;)
  In your case I choose a F55 model and download the drivers. Try to install and see what happens. After this, you can post the result as it might be interesting for other users.

  Normally there is no significant difference between the F50 models.

  Furthermore, most Vista drivers should also work on Windows 7. It s worth a try! ;)

• Need Xp drivers for a Satellite A200-ST2043

  HI -.

  I hope someone can help me find drivers for my system. I was able to find and install some of them, such as HD and Wifi controller, but need me the drivers for my graphics controller, my graphics card and my sound card.

  I heard that Toshiba Europe has drivers for Windows XP, unlike the U.S. site that has Vista for many models. But I was unable to find the A200-ST2043 here - is there an equivalent European model with a different number?

  Anyway, if you can help me find the drivers I'll be very grateful.

  Thank you very much!

  I can help find you the drivers, because it is so easy to find them using Google.com and your machine name or search engine forum of it s.

  Today, I found an interesting post where a user describes an installation of Windows XP on the Satellite A200-ST2043 procedure:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=100804

  Fun with XP

  Welcome them

• Qosmio F55-Q504 drivers for Windows XP

  Hello everyone,

  Help, please. I have three questions:
  1 may be someone has already encountered problems with the drivers for XP for F55. I bought F55 with Vista, installed XP but I found the drivers for the WiFi and nVidia only and I was not able to find drivers for other devices unfortunately. On the site official of thare are drivers for Vista only, and there is not the version of BIOS for XP too. Maybe someone knows where I can find them.

  2. in collaboration with the laptop, there is no any CD and recovery or reinstalling Vista is possible since the only HARD drive recovery partition. For example if I'm afraid of breaking the recovery partition of my experiences with the XP installation or reinstallation of Vista and I want to do the whole HARD disk copy or to make a copy of a partition. Is this possible? Nobody has tried to do that? I tried to copy entire HARD drive with Vista or separate partiotions (recovery partitions) including - new HARD drive or partition is not loaded. I tried several times - there is no positive result. Is there a software to copy on Toshiba HDD protection? And how the HARD drive to copy to avoid lost data?

  3 F55 has GPS and preloaded Garmin Mobile PCA? ¢ - per-round cross-country? ¢ trial version. During loading, the Garmin Mobile application to enter the key. Where can I find the key for the trial version? There is no any CD, sticker or box with the key. And who knows it send a mail from Toshiba? On the official website, there are some phones only, but I can't call them I need e-mail.

  Thank you very much in advance.

  1.
  I have a Qosmio F50-108 and I lowered the from VISTA to XP. Given that our computers cell phones are essentially the same, I'll tell you what I used.

  Video: I use custom of the Dox 180.70 drivers downloaded from www.laptopvideo2go.com (http://www.laptopvideo2go.com/forum/index.php?showtopic=21982). I think that these drivers are OK (the temperature is normal as some other versions have been causing an increase in temp 5-7 degree Celsius).

  Bluetooth (I don't know if your knees there) is from-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Chipset: Intel Matrix Manager-> http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProductID=2101&DwnldID=1705 9 & strOSs = 44 & OSFullName = Windows * % 20XP % 20Professiona l & lang = fra

  Wireless Intel 5100-> http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldId=16979&lang=eng

  Its Realtek ALC 272-> R2.09 v-> http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4 & Conn = 3 & DownTypeID = 3 & GetDown = false

  Network LAN Realtek 8169-> http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5 & Conn = 4 & DownTypeID = 3 & GetDown = false

  AS for MODEM AND CARDBUS CONTROLLER (JMB 38 x)... I did not find the drivers for XP but... I downloaded the VISTA32 versions (in both cases I did the same thing) and I took only the driver. In the case of cardbus controlled the main file (unzip after) I took only the DRIVER file / X 32 and from the Device Manager, I forced an update of the driver of this folder and it worked :)
  Pretty much the same for the modem.
  For cardbus controlled, I used this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU vista32 driver searches for driver Cardbus
  I used this-> http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU vista32 driver for the modem, search for modem and use the first choice: version SM2177ALD04

  One device is unknown, I think it's the NVIDIA HDMI audio driver in VISTA. Unfortunately I couldn't solve it. And I also miss the program that makes the touch buttons work. Seems that there is no equivalent for XP. In regards to the Config Free program tries to use an XP version of the program that is made for A Satellite notebook PC series. For me it worked.

  Post edited by: barbacot

• Dell drivers for NVIDIA GTX 560

  

  I have an Inspiron 580.  I installed an EVGA NVIDIA GTX 560 2 GB 02 G-P3-1469, Windows device ID 1201.  It is correctly installed in the PCI 16 x slot.  I installed a 750 Watt PSU. (2) power of the power supply cords are properly connected to the video card. The video output line is properly connected to the monitor (double entry). The fan on the card.

  I made many attempts to install drivers for this card by using the method of 'DRIVE '.  The best result I got so far is "driver does not support this version of windows. I have Windows 7 64 bit.  I used the drivers for Windows 7 64 bit.

  Of what I discovered that somewhere deep inside the installation of Dell's Windows, the operating system will reject drivers not defined to the system.

  I was not able to find "Approved Dell" drivers NVIDIA GTX 560.

  If these drivers exist, please let me know.

  If there is a registry or WMI configuration problem that will allow me to install the current NVIDIA drivers, let me know.

  If there is an upgrade of the BIOS that is specific to the installation of an auxiliary graphics card, let me know.

  I spent 11 months chasing this problem. I am incredibly lucky that I didn't not turn my computer into a brick. I figured this out little about directly or indirectly by a trail of crumbs independent on the internet. In the process. The solution is.  By this, I mean that there was a communication failure. On the Dell Inspiron 580, and I'm sure that this applies to the other Dell with FRIEND bios, there is no access to the graphics card setting. Make sure that you have properly installed the card in the PCI - X slot, you have a 650 Watt or improving the power of food and hung properly power cables that the card may need.

  All that being said, it's what works:

  1. click on the button 'start '.

  2. Select the "Computer" entry with the right button of the mouse to select 'manage '.

  3. Select "Device Manager" in the list "system tools."

  4 expand the list 'graphics cards.

  5. right click on the name of the adapter

  6. Select 'disable' and ignore the complaints of the OS.

  7. shut down the computer.

  8. INCREDIBLY, RIDICULOUSLY IMPORTANT: Disconnect the cable from the integrated video connector. If you do not do this, the onboard video will automagically to reinstall its drivers when the system boots and you will lose your mind.

  8. disconnect the power cord from the computer and wait 30 seconds.

  9. start the computer. The first thing you see is NVIDIA card manufacturer ID.

  10. DO NOT PANIC! You will see a pop-up dialog box displaying messages on the currently installed drivers. It may take up to 10 minutes for the system to install the PCI, PCI Bridge, and other factors associated with the new graphics card.

  12 download latest and largest installation of NVIDIA nvidia.com and run it.

  13 make a donation of us $ 10 to the Salvation Army or its equivalent in your country.

  This is a solution that Dell should be provided and made available to its customers rather than rely on a client to perform research, analysis of hardware, configuration of the software and documentation FREE techincial.

• Windows 10 drivers for Mac

  Hello

  I have recently installed windows 8 via bootcamp, then updated to windows 8.1. Then I downloaded an iso 10 and updated Windows updated my 8.1 to 10. But now im having some driver problems. When I was using windows 8 and 8.1, I had no problem driver, but now I can't control my keyboard, the screen brightness or volume keys... Basically, all fn keys are out of wack. I tried to search on google to see if I can find the drivers I need, but all that says always use "Apple Software Update" tool in windows to get the drivers. I did, but he says that my machine is up to date. Can someone help me get the right drivers please and tell me how to install?

  I use a 2015 retina mac book pro 15 inches that uses the latest version of OS X and Windows 10 education.

  Thank you

  Please download BC6 drivers for Apple W10 using BC Assistant to a flashdrive uSB, as shown.

  

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!